SHOW, NETWORK
*Conan The Librarian (sorry for the slow response - running on an old VAX)
|
VMS Help SHOW, NETWORK *Conan The Librarian (sorry for the slow response - running on an old VAX) |
|
Displays information about network services registered on a node.
Format
SHOW NETWORK [network-service]
| 1 - Parameter |
network-service
Specifies a network service for which you want to display
information.
If you do not specify a service, the SHOW NETWORK command
displays information about all services that are currently
registered on the local node.
| 2 - Description |
The SHOW NETWORK command displays information about network
services available on an OpenVMS system.
| 3 - Qualifiers |
3.1 - /FULL
Displays all the information for the specified network service.
3.2 - /OLD
If you are running DECnet Phase IV, retains the behavior of
the SHOW NETWORK command prior to OpenVMS Version 7.0. If the
local node is a routing node, the /OLD qualifier provides routing
information.
3.3 - /OUTPUT
/OUTPUT[=filespec]
/NOOUTPUT
Controls where the output of the command is sent. By default,
the output of the SHOW NETWORK command is sent to the current
SYS$OUTPUT device (usually your terminal).
The asterisk (*) and the percent sign (%) wildcard characters
are not allowed in the file specification.
If you enter the /NOOUTPUT qualifier, output is suppressed.
| 4 - Examples |
1.$ SHOW NETWORK
Product: DECnet Node: GALENA Address(es): 19.64
Product: TCP/IP Node: GALENA.zka.cpq.com Address(es): 16.32.0.138
The SHOW NETWORK command in this example displays all the
network services currently registered on the local node, and
the name and address of that node.
2.$ SHOW NETWORK "TCP/IP"
Product: TCP/IP Node: GALENA.zka.cpq.com Address(es): 16.32.0.138
The SHOW NETWORK command in this example displays the TCP/IP
network service registered on the local node.
3.$ SHOW NETWORK/FULL
The following network service is available at this time:
Product: DECNET Manufacturer: Compaq Computer Corporation
Node: NEMYA Address(es): 4.26
Network Type: DNA V Interface(s): net 0
Node 0
at 2001-02-26-10:35:28.737-05:00I526.997
Identifiers
Name = DEC:.LKR.NEMYA
Address =
{
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_OSItransportV1 , 'DEC0'H ] ,
[ DNA_OSInetwork , 49::00-04:AA-00-04-00-1A-10:21 (DEC:.LKR.NEMYA) ]
,)
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV2 , number = 19 ] ,
[ DNA_OSItransportV1 , 'DEC0'H ] ,
[ DNA_IP , 0.0.0.0 ]
,)
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_NSP ] ,
[ DNA_OSInetwork , 49::00-04:AA-00-04-00-1A-10:20 (DEC:.LKR.NEMYA) ]
)
}
Status
UID = 06E08000-DF79-11D4-8001-AA0004001A10
State = On
Functions Enabled =
{
Address Watcher ,
CMIP Listener
}
ID = 08-00-2B-E5-A8-AB
Characteristics
Version = T5.0.3
Implementation =
{
[
Name = OpenVMS AXP ,
Version = "X901-SSB"
] ,
[
Name = Compaq DECnet-Plus for OpenVMS ,
Version = "V7.3 30-DEC-2000 01:14:34.32"
]
}
Script Location = <Default value>
Maximum Listeners = 0
Listener Template = <Default value>
Secondary Names =
{
LOCAL:.NEMYA
}
Counters
Creation Time = 2001-02-05-11:53:38.135-05:00Iinf
Renames = 1
Changes of ID = 9
IDROM Check Failures = 0
Changes of Address = 0
Node 0 Session Control Port SCL$PORT$12010029
at 2001-02-26-10:35:30.230-05:00I526.997
Identifiers
Name = SCL$PORT$12010029
Status
Client = Session Control Application 42
Local End User Address = UIC = [0,0]SYSTEM
Transport Port = OSI Transport Port OSI$PORT_0_002A
Direction = Outgoing
Remote End User Address = number = 42
Node Name Sent = DEC:.LKR.NEMYA
Version Sent = V3
Outgoing Network Priority = 0
Incoming Network Priority = 0
Process Identifier = "00000127"
Counters
Creation Time = 2001-02-26-10:33:14.104-05:00I526.966
Node 0 Session Control Port SCL$PORT$1201002A
at 2001-02-26-10:35:30.230-05:00I526.997
Identifiers
Name = SCL$PORT$1201002A
Status
Client = Session Control Application 42
Local End User Address = number = 42
Transport Port = OSI Transport Port OSI$PORT_0_002B
Direction = Incoming
Remote End User Address = UIC = [0,0]SYSTEM
Node Name Sent = DEC:.LKR.NEMYA
Version Sent = V3
Outgoing Network Priority = 0
Incoming Network Priority = 0
Process Identifier = "00000115"
Counters
Creation Time = 2001-02-26-10:33:14.112-05:00I526.966
Node 0 Session Control Port SCL$PORT$1201002D
at 2001-02-26-10:35:30.230-05:00I526.997
Identifiers
Name = SCL$PORT$1201002D
Status
Client = Session Control Application 42
Local End User Address = UIC = [0,0]SYSTEM
Transport Port = OSI Transport Port OSI$PORT_0_002E
Direction = Outgoing
Remote End User Address = number = 42
Node Name Sent = DEC:.LKR.NEMYA
Version Sent = V3
Outgoing Network Priority = 0
Incoming Network Priority = 0
Process Identifier = "0000012C"
Counters
Creation Time = 2001-02-26-10:35:19.522-05:00I526.996
Node 0 Session Control Port SCL$PORT$1201002E
at 2001-02-26-10:35:30.231-05:00I526.997
Identifiers
Name = SCL$PORT$1201002E
Status
Client = Session Control Application 42
Local End User Address = number = 42
Transport Port = OSI Transport Port OSI$PORT_0_002F
Direction = Incoming
Remote End User Address = UIC = [0,0]SYSTEM
Node Name Sent = DEC:.LKR.NEMYA
Version Sent = V3
Outgoing Network Priority = 0
Incoming Network Priority = 0
Process Identifier = "00000115"
Counters
Creation Time = 2001-02-26-10:35:19.529-05:00I526.996
Node 0 Session Control
at 2001-02-26-10:35:32.081-05:00I526.997
Counters
Creation Time = 2001-02-06-23:56:24.297-05:00Iinf
Access Control Violations = 0
Backtranslation Deletions = 0
Deleted Maintained Objects = 0
Dangling Links = 0
Verification Failures = 0
$
The SHOW NETWORK/FULL command in this example displays all the
information available about all the network services registered
on the local node.
|
|
