Library /sys$common/syshlp/wp.hlb HELP *Conan The Librarian (sorry for the slow response - running on an old VAX) |
****************************************************************************** ****************************************************************************** FOR INTERNAL USE ONLY Copyright (c) 1986 by Digital Equipment Corporation The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may occur in this document. This specification does not describe any program or product which is currently available from Digital Equipment Corporation. Nor does Digital Equipment Corporation commit to implement this specification in any product or program. Digital Equipment Corporation makes no commitment that this document accurately describes any product it might make. ****************************************************************************** ****************************************************************************** The WATCHPOINT UTILITY is an Internal Use Only debugging tool that maintains a history of modification that are made to a particular location in system (S0) address space. The WATCHPOINT command interpreter (WP) issues $QIO request to the WATCHPOINT driver (WPDRIVER) from commands that follow the standard rules of DCL grammar. Commands may be entered at the WP> prompt to set, delete, and obtain information from watchpoints. Before invoking the WATCHPOINT command interpreter (WP), the WATCHPOINT driver (WPDRIVER), must first be installed with SYSGEN. This can be accomplished as follows: $ RUN SYS$SYSTEM:SYSGEN SYSGEN> CONNECT WPA0:/NOADAPTER SYSGEN> EXIT The WATCHPOINT command interpreter (WP) can then be invoked with the command: $ RUN SYS$SYSTEM:WP Commands may then be entered at the WP> prompt to set, delete,and obtain information from Watchpoints.
|