Library /sys$common/syshlp/tcpip$ucp_help.hlb SHOW, CONFIGURATION  *Conan The Librarian (sorry for the slow response - running on an old VAX)

    Displays the information in the configuration database. This
    database, read by the TCP/IP Services startup procedure, holds
    information to:

    o  Configure the lower-layer protocols, including dynamic
       routing.

    o  Configure and enable the Internet interfaces.

    o  Configure the services you want enabled when TCP/IP Services
       starts up.

    o  Configure the BIND resolver.

    o  Configure the BIND server, including the default domain.

    o  Configure SMTP.

    o  Configure SNMP.

    o  Configure TIME.

    o  Map file systems.

    Because the SET CONFIGURATION commands do not take effect until
    the next time TCP/IP Services starts up, the SHOW CONFIGURATION
    command might not display the current settings for the running
    software. For example, the information you see from SHOW
    CONFIGURATION PROTOCOL might differ from the SHOW PROTOCOL
    /PARAMETERS output.

    Related commands: All SET CONFIGURATION commands

    Format

      SHOW CONFIGURATION  { component

                          ENABLE SERVICE [service]

                          START ROUTING }

                          [ /COMMON ]

                          [ /FULL ]

                          [ /OUTPUT=file ]

  Additional Information (explode) :

• Parameters
• Qualifiers
• Examples
• PROTOCOL