1 ANALYZE
2 CONTAINER
Verifies the integrity of a UNIX container file, including the
following checks:
o Superblock validation
o Inode validation
o Directory validation
o Internal allocation validation
o Directory hierarchy validation
Reports, and optionally corrects, problems within the structure
of the container directory. Applies to the NFS server.
Related commands: DIRECTORY, SHOW CFS, MAP, UNMAP
Format
ANALYZE CONTAINER device:path.name
[ /[NO]CONFIRM ]
[ /[NO]REPAIR ]
3 Restrictions_and_Tips
o Before you enter the ANALYZE CONTAINER command, you must map
the OpenVMS volume on which the container directory resides,
using the MAP command.
o Before you enter the ANALYZE CONTAINER command, unmap the
container file system to prevent users from attempting to
access to it while you analyze it.
o This command requires the BYPASS privilege.
3 Parameters
device:path.name
Required.
Device and container directory to analyze.
3 Qualifiers
/CONFIRM
/CONFIRM
/NOCONFIRM
Optional. Default: /NOCONFIRM.
Use only with the /REPAIR qualifier.
When the software encounters a problem with the services
database, it displays a description and solution and then
requests confirmation before making each correction. For example:
%TCPIP-E-ANA_SUP_BADIICGSIZE, Problem: Bad initial inode cell group size:bad_value
Solution: Will be replaced by default size: good_value
CONFIRM [Y/N/G]:
In respose to the CONFIRM: prompt, enter one of the following:
o Y to repair the problem
o N to ignore the problem
o G to change to NO CONFIRMATION mode
/REPAIR
/REPAIR
/NOREPAIR
Optional. Default: /NOREPAIR.
Any errors will be repaired.
3 Examples
1.TCPIP> UNMAP "/wren20"
TCPIP> ANALYZE CONTAINER DUA0:[WREN20]
Verifies the integrity of container DUA0:[WREN20].
2 MAIL
Verifies the consistency of the SMTP queues with SMTP control
files.
Related commands: REMOVE MAIL, SHOW MAIL
Format
ANALYZE MAIL [ user ]
[ /[NO]CONFIRM ]
[ /DELETE[=options ]
[ /HOLD=time ]
[ /LOG=file ]
[ /[NO]REPAIR ]
3 Restrictions
Requires SYSNAM, SYSPRV, or BYPASS privilege to access mail that
is not yours.
3 Parameters
user
Optional. Default: All users.
User whose mail you want to analyze.
3 Qualifiers
/CONFIRM
/CONFIRM
/NOCONFIRM
Optional. Default: /NOCONFIRM
Use only with either the /REPAIR or the /DELETE qualifier.
When the software encounters a problem, it displays a description
and solution. It then requests confirmation before making a
correction or deleting each record. Enter one of the following:
o Y to repair the problem
o N to ignore the problem
o G to change to NO CONFIRMATION mode
/DELETE
/DELETE [=BEFORE=time | =SINCE=time]
Optional. Default: Files not deleted.
Deletes each control file without a corresponding queue entry.
o =BEFORE=time
- Deletes files created before the specified time.
- Default: Current date and time.
o =SINCE=time
- Deletes files created since the specified time.
- Default: Deletes all files.
Use the /DELETE and /REPAIR qualifiers on the same command line
only if their time frames do not conflict.
The following command requeues lost mail created since yesterday
and deletes all previous mail:
TCPIP> ANALYZE MAIL /REPAIR /DELETE=BEFORE=YESTERDAY
/HOLD
/HOLD=time
Optional. Default: Immediate retransmission.
Hold, until the specified time, lost control files that you
requeued.
/LOG
/LOG[=file]
Optional. Default: [current_default_dir]:TCPIP$SMTP_ANALYZE.LOG.
Writes the ANALYZE MAIL log to the specified file.
/REPAIR
/REPAIR
/NOREPAIR [=BEFORE=time | =SINCE=time]
Optional. Default: /NOREPAIR.
Corrects errors as follows:
o Resubmits for delivery each valid control file in the SMTP
directory with no entry in an SMTP queue.
o Deletes each invalid control file (fails the internal
consistency check) and the corresponding queue entry.
o Either requeues or deletes messages placed on hold.
Supports the following options:
o =BEFORE=time
- Deletes files created before the specified time.
- Default: Current date and time.
o =SINCE=time
- Deletes files created since the specified time.
- Default: Deletes all files.
Do not use /REPAIR with /DELETE if their time frames conflict.
3 Examples
1.TCPIP> ANALYZE MAIL /REPAIR
Displays status for the SMTP queues, and requeues each valid
control file that lacks a corresponding queue entry.
2.TCPIP> ANALYZE MAIL /DELETE
Creates the summary of SMTP queues, and deletes each valid
control file that lacks a corresponding SMTP queue entry.
3.TCPIP> ANALYZE MAIL DRAKE
%TCPIP-I-ANA_RUNING, ANALYZE runs on node DODO
%TCPIP-I-ANA_NOENTR, no queue entry found for file
NEST3$:[DRAKE]93042311394417_DRAKE.TCPIP_DODO;1
%TCPIP-I-ANA_COMPLE, ANALYZE completed on node DODO
%TCPIP-I-ANA_FEPAIR, found 0 file-queue entry pairs
%TCPIP-I-ANA_DELQEN, deleted 0 queue entries
%TCPIP-I-ANA_FILNOQ, found 1 files with no queue entries
%TCPIP-I-ANA_FILHLD, holding 0 files in directory
%TCPIP-I-ANA_FILDEL, deleted 0 files from the Postmaster directory
%TCPIP-I-ANA_SUBFIL, submitted 0 files to the generic queue
%TCPIP-I-ANA_FILACE, encountered 0 file access errors
%TCPIP-I-ANA_NONCFF,found 0 non-unknown files in Postmaster directory
%TCPIP-I-ANA_FILCOR,found 0 corrupted CFfiles in Postmaster directory
TCPIP>
Creates a summary of SMTP entries and control files for user
DRAKE.
4.TCPIP> ANALYZE MAIL DRAKE /REPAIR /DELETE=BEFORE=24-SEP-2000
o Creates a summary of SMTP entries and control files for user
DRAKE.
o Requeues control files that lack corresponding queue
entries.
o Deletes control files created before September 24, 2000.
2 SERVICE
Searches through the services database for corrupted definitions.
Displays invalid records and, with the /REPAIR qualifier, deletes
them.
Related commands: SET SERVICE, SHOW SERVICE
Format
ANALYZE SERVICE [ /[NO]CONFIRM ]
[ /[NO]REPAIR ]
3 Restrictions
Requires write access to the directory with the services
database.
3 Qualifiers
/CONFIRM
/CONFIRM
/NOCONFIRM
Optional. Default: /NOCONFIRM.
Use only with the /REPAIR qualifier.
When the software encounters a problem, it displays a description
and a solution. It then requests confirmation before making a
correction.
Respond to the CONFIRM: prompt by entering one of the following:
o Y to repair the problem
o N to ignore the problem
o G to change to NO CONFIRMATION mode
/REPAIR
/REPAIR
/NOREPAIR
Optional. Default: /NOREPAIR
Deletes the corrupted records.
3 Examples
1.TCPIP> ANALYZE SERVICE
Invalid IP option records
Service Port Proto Process Address
TOE 25 TCP TOED 0.0.0.0
NESTING 560 TCP NEW_EGGS_TCPIP 0.0.0.0
IP option records
Total: 0
Invalid: 0
TCP option records
Total: 7
Invalid: 2
Displays total and invalid protocol option records found in two
service definitions, TOE and NESTING.
2.TCPIP> ANALYZE SERVICE /REPAIR /CONFIRM
Invalid IP option records
Service Port Proto Process Address
TOE 67 UDP TOED 0.0.0.0
Remove? [N]: YES
Service Port Proto Process Address
NESTING 69 UDP NEW_EGGS_TCPIP 0.0.0.0
Remove? [N]: YES
Displays the total protocol option records and deletes, after
confirmation, the invalid records.