Library /sys$common/syshlp/tcpip$telnet_help.hlb SHOW, DEVICE, Example *Conan The Librarian (sorry for the slow response - running on an old VAX) |
TELNET> SHOW DEVICE TNA281: TNA281: BG9526: Temporary condor:23 freebid:1033 Displays status of a particular TNA device. TELNET> SHOW DEVICE TELNET> show device 1 2 3 4 5 TNA10: BG495: Temporary condor:23 freebid:1059 TNA12: BG658: Temporary condor:23 pigdog:1455 TNA13: BG671: Temporary condor:23 pigdog:1456 TNA35: BG2993: Temporary condor:23 projector:1044 TNA37: BG2999: Temporary condor:23 pigdog:1459 TNA38: BG3000: Temporary condor:23 pigdog:1470 TNA47: BG3393: Temporary condor:23 l-22-222-37.*.com:1069 TNA58: BG3866: Temporary condor:23 pcruth.mel.dec.com:1043 TNA59: BG3878: Temporary condor:23 lexser13.lex.dec.com:1090 TNA60: BG3910: Temporary condor:23 l-20-244-54.*.com:1635 TNA61: BG3932: Temporary condor:23 lexser3.lex.dec.com:1093 TNA62: BG3933: Temporary condor:23 tcpipa:1801 TNA63: Temporary Displays status of all TNA devices on the local system. Command output includes: 1 The TNA device (terminal device) 2 The associated BG device (network device) 3 Whether the TNA device is permanent or temporary 4 Local host name and port number 5 Remote host name and port number TELNET> SHOW DEVICE/FULL Device TNA7: Access port name: "Host: 16.99.999.140 Port: 1310" Characteristics: (none) Connection attempts: 0 (tries) Connection interval: 0 (seconds) Connection timeout: 0 (seconds) Data high limit: 512 (bytes at VCI port) Data low limit: 256 (bytes at VCI port) Idle interval: 0 (seconds) Idle timeout: 0 (seconds) Network device name: BG266: Protocol: TELNET Local address: 16.99.999.100 (condor) port: 23 Remote address: 16.99.999.140 (pigdog.dec.com) port: 1310 Service type: None . . . Displays detailed information on all TNA devices which exist on the local system. The information shown in the example is output for each TNA device.
|