Library /sys$common/syshlp/sysgen.hlb AUTOCONFIGURE, Qualifiers, /SELECT  *Conan The Librarian (sorry for the slow response - running on an old VAX)

       /SELECT=(device-name[,...])

    Specifies the device types that you want automatically
    configured.

    You can specify a device-type code as shown in the following
    table. You can include a controller designation but not a unit
    number. If the controller designation is omitted, all devices of
    the specified type are selected. The device-name specification
    defaults to all devices on the adapter.

    Do not use /SELECT with the /EXCLUDE qualifier.

    Device Type Codes

    Code     Device Type

    CR       Card Reader
    CS       Console Storage Device
    DB       RP05, RP06 Disk
    DD       TU58 Cartridge Tape
    DJ       RA60 Disk
    DL       RL02 Cartridge Disk
    DM       RK06, RK07 Cartridge Disk
    DQ       RL02 Cartridge Disk, R80 Disk
    DR       RM03, RM05, RM80, RP07 Disk
    DU       UDA Disk
    DX       RX01 Diskette
    DY       RX02 Diskette
    LA       LPA11-K Laboratory Peripheral Accelerator
    LC       Line Printer on DMF32
    LP       Line Printer on LP11
    MB       Mailbox
    MF       TU78 Magnetic Tape
    MS       TS11 Magnetic Tape
    MT       TE16, TU45, TU77 Magnetic Tape
    MU       Tape Class Driver
    NET      Network Communications Logical Device
    NL       System "Null" Device
    OP       Operator's Console
    PA       Computer Interconnect
    PT       TU81 Magnetic Tape
    PU       UDA-50
    RT       Remote Terminal
    TT       Interactive Terminal on DZ11
    TX       Interactive Terminal on DMF32, DMZ32, DHU11, or DMB32
    XA       DR11-W General-Purpose DMA Interface
    XD       DMP-11 Synchronous Communications Line
    XF       DR32 Interface Adapter
    XG       DMF32 Synchronous Communications Line
    XI       DR Interface on DMF32
    XJ       DUP11 Synchronous Communications Line
    XM       DMC11 Synchronous Communications Line