Library /sys$common/syshlp/ncphelp.hlb SET, MODULE, X25-SERVER, Examples  *Conan The Librarian (sorry for the slow response - running on an old VAX)

      NCP>SET MODULE X25-SERVER DESTINATION JOE SUBADDRESSES 12-24 -
      _ SENDING ADDRESS 987321654 PRIORITY 3 OBJECT OBJONE

          This command creates a destination called JOE that will
          handle incoming X.25 calls from a DTE with an address of
          987321654 and a subaddress in the range 12 to 24
          specified in the DECnet object database.

      NCP>SET MODULE X25-SERVER DESTINATION DEFDES OBJECT LAST -
      _ PRIORITY 0

          This command modifies the destination called DEFDES that
          will handle any incoming calls.  The destination has the
          lowest priority and will only handle calls that fail to
          find another destination.

      NCP>SET MODULE X25-SERVER DESTINATION THRUSH -
      _ SUBADDRESSES 11-20 OBJECT 36 NODE THRUSH

          This command creates a destination called THRUSH for node
          THRUSH that will match incoming X.25 calls with a
          subaddress in the range 11 to 20.  This command is used
          if the executor node is a VMS node with VAX P.S.I.
          software in multihost mode installed, serving as a
          connector node.  Object 36 is the object number for VAX
          P.S.I. Access on the remote node.