Library /sys$common/syshlp/ncphelp.hlb SET, MODULE, X25-SERVER  *Conan The Librarian (sorry for the slow response - running on an old VAX)

 Use the SET MODULE X25-SERVER and SET MODULE X29-SERVER commands to
 create or modify the parameters of the X.25 or X.29 Call Handler in
 the volatile data base. Use the DEFINE MODULE X25-SERVER and DEFINE
 MODULE X29-SERVER commands to create or modify the parameters of the
 X.25 or X.29 Call Handler in the permanent data base.

 Use separate SET/DEFINE MODULE X25-SERVER or SET/DEFINE MODULE
 X29-SERVER commands to specify the module parameters and the
 destinations.  The server modules contain records that identify and
 specify parameters for a destination, specify a maximum number of
 circuits that each module (that is, all destinations for a particular
 module) may have, and specify the state of the module.

 SET    MODULE X25-SERVER  ALL
 DEFINE        X29-SERVER  COUNTER TIMER seconds
                           MAXIMUM CIRCUITS count
                           STATE   ON
                                   OFF
                                   SHUT

 SET    MODULE X25-SERVER  DESTINATION dest-name  dest-params
 DEFINE        X29-SERVER  KNOWN DESTINATIONS

 All underscores found in parameters must be replaced with spaces
 when parameters are used in NCP commands.

  Additional Information (explode) :

• ALL
• COUNTER TIMER seconds
• DESTINATION dest-name
• KNOWN DESTINATIONS
• MAXIMUM CIRCUITS count
• STATE module-state
• Examples