Library /sys$common/syshlp/ncphelp.hlb SET, MODULE, X25-PROTOCOL  *Conan The Librarian (sorry for the slow response - running on an old VAX)

 Use the SET MODULE X25-PROTOCOL command to create or modify the
 parameters of the Protocol Module component in the volatile data base.
 Use the DEFINE MODULE X25-PROTOCOL command to create or modify the
 parameters of the Protocol Module component in the permanent data
 base.

 Use separate SET MODULE X25-PROTOCOL commands to a specify a DTE with
 its associated parameters, a group with its associated parameters, and
 the network profile.  The X25-PROTOCOL module contains records that
 identify the packet switching data networks (PSDNs) your DTE is
 connected to, associate your local DTE (and possibly a group name)
 with VAX P.S.I., and control transmission of packets.

 SET    MOD X25-PROTOCOL  DTE dte-addr  NETWORK net-name  dte-params
 DEFINE                   KNOWN DTES    KNOWN NETWORKS

 SET    MOD X25-PROTOCOL   GROUP group-name  ALL
 DEFINE                    KNOWN GROUPS      DTE dte-addr
                                             NETWORK net-name
                                             NUMBER group-number
                                             TYPE BILATERAL

 SET    MOD X25-PROTOCOL   NETWORK net-name  PROFILE profile-name
 DEFINE                    KNOWN NETWORKS    ALL

 All underscores found in parameters must be replaced with spaces
 when parameters are used in NCP commands.

  Additional Information (explode) :

• DTE dte-addr
• GROUP group name
• KNOWN_DTES
• KNOWN_GROUPS
• KNOWN_NETWORKS
• NETWORK net-name
• Examples