Library /sys$common/syshlp/ncphelp.hlb SET, LOGGING, Examples  *Conan The Librarian (sorry for the slow response - running on an old VAX)

      NCP>SET LOGGING MONITOR KNOWN EVENTS
      NCP>SET LOGGING MONITOR STATE ON

          These two commands enable normal event logging using OPCOM.
          To receive the formatted events at a terminal, use the DCL
          command REPLY/ENABLE=NETWORK.

      NCP>DEFINE LOGGING MONITOR LINE FZA-1 KNOWN EVENTS

          This command defines logging so that all events for line
          FZA-1 will be logged to the logging monitor the next time
          DECnet is restarted.

      NCP>SET LOGGING CONSOLE EVENTS 4.* SINK NODE LAMCHP

          This command causes all class 4 events to be logged on the
          console of the remote node LAMCHP.

      NCP>SET LOGGING MONITOR EVENTS 7.*

          This command causes all X.25-related events to be logged to
          OPCOM, the default monitor.

      NCP>SET KNOWN LOGGING ALL

          This command loads all permanent database entries stored for
          all logging components into the volatile database.