Library /sys$common/syshlp/ncphelp.hlb SET, CIRCUIT, Examples  *Conan The Librarian (sorry for the slow response - running on an old VAX)

      NCP>SET KNOWN CIRCUITS ALL

          This command loads all permanent database entries stored for
          all known circuits into the volatile database.

      NCP>SET CIRCUIT DMC-0 COST 4 STATE ON

          This command sets the STATE to ON and the circuit COST to 4
          for circuit DMC-0.

      NCP>SET CIRCUIT MNA-0 STATE ON MAXIMUM ROUTERS 5

          This command sets Ethernet circuit MNA-0 to ON and sets the
          maximum number of routers permitted on the circuit to 5.

      NCP>DEFINE CIRCUIT X25-ANDIES CHANNEL 3 DTE 123789456 -
      _ NETWORK PSDND MAXIMUM DATA 1024 MAXIMUM WINDOW 7 USAGE -
      _ PERMANENT STATE ON

          This command defines an X.25 PVC called X25-ANDIES with a
          logical channel number of 3 on the local DTE with
          address 123789456 on network PSDND.  The circuit has a
          maximum packet size of 1024 bytes and a maximum window
          size of 7.

      NCP>DEFINE CIRCUIT X25-DLM-0 NUMBER 456789012 NETWORK PSDNA -
      _ USAGE OUTGOING STATE ON

          This command defines a DLM SVC called X25-DLM-0 connected
          to the remote DTE on network PSDNA with address 456789012,
          and used for outgoing calls.

      NCP>DEFINE CIRCUIT X25-DLM-1 NUMBER 12345677 NETWORK PSDNB -
      _ USAGE INCOMING STATE ON

          This command defines a DLM SVC called X25-DLM-1 on network
          PSDNB that accepts only incoming calls from the remote DTE
          with address 12345677.

      NCP>SET CIRCUIT DMC-* COST 5

          This command sets the circuit cost to 5 for all DMC circuits
          in the volatile database.