Library /sys$common/syshlp/nclhelp.hlb Event Messages, routing *Conan The Librarian (sorry for the slow response - running on an old VAX) |
o address unreachable pdu discard Support: All Generated when a data PDU is discarded because the destination address is unreachable. Arguments: discard Reason why the PDU was discarded. reason destination The destination address is unknown. address unknown destination The destination address is address currently unreachable. unreachable duplicate An optional PDU field occurs twice. option header syntax There is a format error in the PDU error header. incomplete The received data did not contain a pdu complete PDU. received incorrect The checksum is incorrect. checksum lifetime The PDU's lifetime expired while it was expired being reassembled. during reassembly lifetime The PDU's lifetime expired while it was expired in transit. while data unit in transit pdu No buffers were available to forward the discarded packet. due to congestion protocol Unable to translate a DECnet-Plus format procedure PDU into a Phase IV format PDU. error reason not No further information available. specified reassembly Insufficient memory available to interference reassemble a PDU. segmentation The PDU requires fragmentation, but the required, but originator did not permit this. not permitted unsupported The PDU contained an unrecognized and option not unsupported PDU option. specified unsupported The PDU version is not supported. protocol version unsupported The sender requested an unsupported form recording of of route recording. route option unsupported The sender requested an unsupported form source of source routing. routing option phase iv Phase IV destination address of the forwarding Phase IV data packet. address phase iv Phase IV source address of the Phase IV source data packet. address forwarding Destination NSAP address. address receiving Name of the adjacency on which the PDU adjacency was received. For an end node, only the circuit may be specified. source Source NSAP address of the data NPDU. address o aged ip packet discard Support: IP Generated when an IP packet is discarded because the interval specified in its time to live field has expired. o aged pdu discard Support: L1,L2 Generated when a data PDU is discarded because its lifetime has expired. Arguments: discard Reason why the PDU was discarded. See possible reason reasons described under the discard reason argument of the address unreachable pdu discard event. (Not all of these argument values can be generated by this event.) phase iv Phase IV header of the Phase IV packet causing this pdu header event. pdu header Contents of the header of the data PDU that was discarded. o attempt to exceed maximum sequence number Support: L1,L2 Generated when an attempt is made to increase the sequence number of a link-state packet beyond the maximum allowed sequence number. o corrupted lsp detected Support: L1,L2 Generated when a corrupted link-state packet is detected in memory. o egp message discard Support: All Generated when EGP Message is discarded. o ip address unreachable packet discard Support: IP Generated when an IP packet is discarded because its destination is unreachable. Arguments: forwarding IP address on which the forwarding decision for the IP address IP packet was taken. This is usually the destination IP address. icmp Value of the code field of the corresponding ICMP discard destination unreachable message. reason host unreachable network unreachable source route failed LAN Data link address of the broadcast circuit that address is the previous hop for the packet. This argument is present only if the receiving entity argument identifies a broadcast circuit entity. receiving Local name of the circuit entity corresponding to the entity previous hop for the packet. source ip Source IP address of the IP packet. address o ip destination address packet error discard Support: IP Generated when an IP packet is discarded because the destination IP address is invalid (that is, it has an invalid format, or it refers to an unsupported network class). Arguments: destination Destination IP address in the IP packet. ip address LAN Data link address of the broadcast circuit that address is the previous hop for the packet. This argument is present only if the receiving entity argument identifies a broadcast circuit entity. receiving Local name of the circuit entity corresponding to the entity previous hop for the packet. source ip Source IP address of the IP packet. address o ip packet discard Support: IP Generated when an IP packet is discarded because of version number mismatch or bad checksum. Arguments: ip discard Reason why the IP packet was discarded. See the ip reason discard reason argument of the IP Packet Format Error event. ip header IP header of the PDU that caused the event. receiving Local name of the circuit entity corresponding to the entity previous hop for the packet. o ip packet format error Support: IP Generated when an IP packet is discarded because it contains a format error. Arguments: ip discard Reason why the IP packet was discarded. reason duplicate option header syntax error incomplete packet received incorrect checksum incorrect header length incorrect total length option error protocol procedure error reason not specified received via broadcast unsupported option not specified unsupported protocol version unsupported security option ip header IP header of the PDU that caused the event. LAN Data link address of the broadcast circuit that address is the previous hop for the packet. This argument is present only if the receiving entity argument identifies a broadcast circuit entity. pointer Offset of the octet in the IP header that caused the format error. receiving Local name of the circuit entity corresponding to the entity previous hop for the packet. o ip protocol unreachable packet discard Support: IP Generated when an IP packet is discarded because there was no port on the local system for the protocol type specified in the IP header. Arguments: destination Value of the protocol field in the IP packet. protocol icmp Value of the code field of the corresponding ICMP discard destination unreachable message. reason Port Unreachable Protocol Unreachable LAN Data link address of the broadcast circuit that address is the previous hop for the packet. This argument is present only if the Receiving Entity argument identifies a broadcast circuit entity. receiving Local name of the circuit entity corresponding to the entity previous hop for the packet. source ip Source IP address of the IP packet. address o ip source address packet error discard Support: IP Generated when an IP packet is discarded because the source IP address is invalid (that is, it has an invalid format, or it refers to an unsupported network class). Arguments: destination Destination IP address in the IP packet. ip address LAN Data link address of the broadcast circuit that address is the previous hop for the packet. This argument is present only if the Receiving Entity argument identifies a broadcast circuit entity. receiving Local name of the circuit entity corresponding to the entity previous hop for the packet. source ip Source IP address of the IP packet. address o lsp L1 database overload Support: L1,L2 Generated when the status attribute L1 state changes from on to waiting, or vice versa. Arguments: source id Source ID of the link-state packet. state Current state. change recovered Router operating normally. waiting Router has failed to store a link-state packet, and is operating in restricted mode. o lsp L2 database overload Support: L2 Generated when the status attribute L2 state changes from on to waiting, or vice versa. Arguments: source id Source ID of the link-state packet. state Current state. change recovered Router is operating normally. waiting Router has failed to store a link-state packet, and is operating in restricted mode. o manual address dropped from area Support: L1,L2 Generated when one of the addresses in the manual area addresses set is ignored when computing an area address. The event is generated once for each address that is dropped. Argument: area Area address that caused the maximum number of area address addresses to be exceeded. o own lsp purged Support: L1,L2 Generated when a zero-aged copy of a node's own link-state packet is received from some other node. This represents an invalid attempt to purge the local node's link-state packet. o pdu format error Support: All Generated when a data PDU is discarded because of a format error. Arguments: discard Reason why the PDU was in error. See possible reasons reason described under the discard reason argument of the address unreachable pdu discard event. (Not all of these argument values are generated by this event.) phase iv Phase IV header of the Phase IV packet causing this pdu header event. pdu header Contents of the header of the data PDU that was discarded. receiving Name of the adjacency on which the PDU was received. adjacency For an end node on a LAN, only the circuit may be specified for Tru64 UNIX. o phaseiv translation failure Support: All Generated when a PDU is discarded because it cannot be translated to Phase IV format. Arguments: receiving Local entity name of the adjacency upon which the adjacency PDU was received. For an end node on a LAN, only the circuit may be specified for Tru64 UNIX. pdu header Data PDU header causing the event. o sequence number skipped Support: L1,L2 Generated when the sequence number of a link-state packet is incremented by more than 1. This usually occurs when a router is reenabled while its previous link-state packets are still stored in the network. o unsupported option Generated when a data packet is received that contains an unsupported option in its header. Arguments: discard Reason why the event was generated. See possible reason reasons described under the discard reason argument of the address unreachable pdu discard event. (Not all of these argument values are generated by this event.) pdu header Contents of the header of the data PDU that caused the event. receiving Name of the adjacency on which the PDU was received. adjacency For an end node on a LAN, only the circuit may be specified.
Additional Information (explode) :
|