RTL Routines, SMG$, SMG$READ_STRING, Arguments
*Conan The Librarian (sorry for the slow response - running on an old VAX)
|
/sys$common/syshlp/helplib.hlb RTL Routines, SMG$, SMG$READ_STRING, Arguments *Conan The Librarian (sorry for the slow response - running on an old VAX) |
|
keyboard-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Specifies the virtual keyboard from which input is to be read.
The keyboard-id argument is the address of an unsigned longword
that contains the keyboard identifier.
The keyboard identifier is returned by SMG$CREATE_VIRTUAL_
KEYBOARD.
resultant-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
String into which the input line is written. The resultant-string
argument is the address of a descriptor pointing to the string
into which the text is written.
prompt-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
String used to prompt for the read operation. The prompt-string
argument is the address of a descriptor pointing to the prompt
string.
maximum-length
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the maximum number of characters to be read. The
maximum-length argument is the address of a signed longword that
contains the maximum number of characters to be read. The maximum
valid value for this argument is 512. If omitted, 512 is the
default.
modifiers
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Optional bit mask that specifies optional behavior. The modifiers
argument is the address of an unsigned longword that contains the
flag.
Valid values for modifiers are as follows:
TRM$M_TM_CVTLOW Converts lowercase characters to uppercase
characters.
TRM$M_TM_NOECHO Characters entered are not echoed on the
screen.
TRM$M_TM_NOEDIT Advanced editing is disabled for this read
operation.
TRM$M_TM_NORECALL Line recall is disabled.
TRM$M_TM_PURGE Type-ahead buffer is purged before read is
begun.
TRM$M_TM_ Termination character, if any, is not
TRMNOECHO displayed.
The TRM$ symbols are defined by the $TRMDEF macro/module in
system symbol libraries supplied by Compaq. See the terminal
driver section of the OpenVMS I/O User's Reference Manual for
more information on modifiers for read operations.
timeout
OpenVMS usage:longword_signed
type: longword (signed)
access: read only
mechanism: by reference
Specifies the number of seconds allowed between the time the
prompt is issued and the completion of the input operation.
The timeout argument is the address of a signed longword that
contains the timeout value.
If timeout is specified, all characters typed before the
expiration time or until a terminate key is entered are returned
in resultant-string. If omitted, the input operation remains
active until a terminator is typed.
terminator-set
OpenVMS usage:unspecified
type: unspecified
access: read only
mechanism: by descriptor, fixed length
Either a mask that specifies which characters are to be treated
as terminators (short form) or a descriptor pointing to such a
mask (long form). The terminator-set argument is the address of a
descriptor pointing to the mask.
If you want to use terminators with ASCII values in the range 0
to 31, use the short form, which consists of two longwords. The
first longword is zero, and the second longword is a terminator
character bit mask. You create this mask by setting the bit that
corresponds to the ASCII value of the desired terminator. For
example, to specify that Ctrl/A (ASCII value 1) is a terminator,
you set bit 1 in the terminator-set mask.
To use terminators with ASCII values outside the range 0 to 31,
use the long form. First create a descriptor of this form:
31 16 15 0
----------------------------------------------------------------
| | |
| (not used) | mask size in bytes |
| | |
----------------------------------------------------------------
| |
| address of mask |
| |
----------------------------------------------------------------
The mask itself has the same format as that of the short form;
however, the long form allows the use of a more comprehensive set
of terminator characters. For example, a mask size of 16 bytes
allows any 7-bit ASCII character to be set as a terminator, while
a mask size of 32 bytes allows any 8-bit character to be set as a
terminator. Any mask size between 1 and 32 bytes is acceptable.
If the terminator mask is all zeros, there are no specified
terminators. In that case, the read terminates when the number
of characters specified in maximum-length has been transferred or
when timeout is reached.
If the terminator-set argument is omitted, the set of terminators
is the OpenVMS default terminator set. For more information, see
the OpenVMS I/O User's Reference Manual.
resultant-length
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Receives the number of characters read or the maximum size
of resultant-string, whichever is less. The resultant-length
argument is the address of an unsigned word into which is written
the number of characters read or the maximum size.
word-terminator-code
OpenVMS usage:word_unsigned
type: word (unsigned)
access: write only
mechanism: by reference
Key terminator code. The word-terminator-code argument is an
unsigned word into which is written a code indicating what
character or key terminated the read. Key terminator codes are
of the form SMG$K_TRM_keyname.
display-id
OpenVMS usage:identifier
type: longword (unsigned)
access: read only
mechanism: by reference
Display identifier. The display-id argument is the address of
an unsigned longword that contains the display identifier.
This argument is optional only if you are not using the Screen
Management Facility's output routines.
If you are using the Screen Management Facility input and output
routines, this argument specifies the virtual display in which
the input is to occur. The virtual display specified must be
pasted to the same pasteboard as specified by keyboard-id and
must not be occluded. You cannot accept input from an occluded
area of the virtual display.
In the case of multiple virtual displays, each virtual display
has an associated virtual cursor position. At the same time,
there is a single physical cursor position corresponding to
the current location of the physical cursor. If the display-id
argument is specified, the read begins at the current virtual
cursor position in the specified virtual display. If display-
id is omitted, the read begins in the current physical cursor
position. Note that the length of the prompt-string plus the
key entered is limited to the number of visible columns in the
display.
NOTE
This virtual display must be pasted in column 1 and may
not have any other virtual displays to its right. This
restriction applies because otherwise the occurrence of a
Ctrl/R or Ctrl/U would cause the entire line to be blanked,
including any output to the right. To circumvent this
restriction, you may use SMG$REPAINT_LINE to repaint the
line when a Ctrl/R or Ctrl/U is detected.
initial-string
OpenVMS usage:char_string
type: character string
access: read only
mechanism: by descriptor
Initial character string. The initial-string argument is the
address of a descriptor pointing to the optional string that
contains the initial characters of the field. The string is
written to the display in the input area, as if it had been
entered from the keyboard. It may be edited in the usual
way (provided that TRM$M_TM_NOEDIT is not set). It must be
shorter than maximum-length, otherwise SMG$READ_STRING returns
immediately without accepting any keyboard input.
rendition-set
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute specifier. The optional rendition-set argument is
the address of a longword bit mask in which each attribute set
causes the corresponding attribute to be set in the display. The
following attributes can be specified using the rendition-set
argument:
SMG$M_BLINK Displays blinking characters.
SMG$M_BOLD Displays characters in higher-than-normal
intensity (bolded).
SMG$M_REVERSE Displays characters in reverse video; that is,
using the opposite default rendition of the
virtual display.
SMG$M_UNDERLINE Displays underlined characters.
SMG$M_INVISIBLE Specifies invisible characters; that is, the
characters exist in the virtual display but do
not appear on the pasteboard.
SMG$M_USER1 Displays user-defined attributes.
through
SMG$M_USER8
The display-id argument must be specified when you use the
rendition-set argument.
rendition-complement
OpenVMS usage:mask_longword
type: longword (unsigned)
access: read only
mechanism: by reference
Attribute complement specifier. The optional rendition-
complement argument is the address of a longword bit mask in
which each attribute set causes the corresponding attribute to
be complemented in the display. All of the attributes that can be
specified with the rendition-set argument can be complemented
with rendition-complement. The display-id argument must be
specified when you use the rendition-complement argument.
The optional arguments rendition-set and rendition-complement let
the user control the attributes of the virtual display in which
the read is done. The rendition-set argument sets certain virtual
display attributes, while rendition-complement complements
these attributes. If the same bit is specified in both the
rendition-set and rendition-complement parameters, rendition-
set is evaluated first, followed by rendition-complement.
By using these two parameters together, the user can control
each virtual display attribute in a single procedure call.
On a single-attribute basis, the user can cause the following
transformations:
Set Complement Action
0 0 Attribute set to default
1 0 Attribute on
0 1 Attribute set to complement of current setting
1 1 Attribute off
terminator-string
OpenVMS usage:char_string
type: character string
access: write only
mechanism: by descriptor
Characters that terminate I/O. The optional terminator-string
argument is the address of a descriptor pointing to the character
string containing the terminating characters. The terminator-
string argument returns the actual terminating characters, not
the key that was pressed to terminate the I/O.
|
|
