DCE_DTS, dtscp_commands, set
*Conan The Librarian (sorry for the slow response - running on an old VAX)
|
/sys$common/syshlp/helplib.hlb DCE_DTS, dtscp_commands, set *Conan The Librarian (sorry for the slow response - running on an old VAX) |
|
NAME
set - Modifies characteristics for the DTS entity.
SYNOPSIS
dtscp set characteristic
ARGUMENTS
characteristic
The name and value of one or more characteristics to be
modified. Valid values for characteristic are described
in the following list. These values are described in more
detail in the description section.
+ check interval [relative-time]
+ courier role [role]
+ error tolerance [relative-time]
+ global set timeout [relative-time]
+ local set timeout [relative-time]
+ maximum inaccuracy [relative-time]
+ query attempts [integer]
+ server entry name [name]
+ server group name [name]
+ server principal name [name]
+ servers required [integer]
+ synchronization hold down [relative-time]
DESCRIPTION
The set command modifies the charactistics you specify for the DTS
entity. The modifiable characteristics and their values are
described in the following list.
check interval [relative-time]
Specifies the amount of time between checks for faulty
servers. Applicable only for servers that have external
time providers.
Default: 0-01:30:00.000
Value: 0-00:00:30.000 - 10675199-02:48:05.000
courier role [role]
Specifies a server's interaction with the set of global
servers.
Default: backup courier
The following values are valid:
backup courier
The local server becomes a courier if none are
available on the LAN.
courier The local server synchronizes with the global
set of servers.
noncourier
The local server does not synchronize with the
global set of servers.
error tolerance [relative-time]
Specifies the maximum separation allowed between the
local clock and the computed time before synchronizations
become abrupt rather than gradual (monotonic).
Default: 0-00:10:00.000
Value: 0-00:00:00.500 - 10675199-02:48:05.000
global set timeout [relative-time]
Specifies the amount of time the node waits for a response
to a global synchronization request before sending another
request or declaring a global server to be unavailable.
The number of attempts made to reach the server is
controlled by the query attemps characteristic.
Default: 0-00:00:15.000
Value: 0-00:00:00.000 - 0-00:10:00.000
local set timeout [relative-time]
Specifies the amount of time the node waits for a response
to a local synchronization request before sending another
request or declaring a server to be unavailable. The number
of attempts made to reach the server is controlled by the
query attemps characteristic.
Note that the local set timeout value controls only the
initial contact with a time provider. During this initial
contact, the time provider itself determines the timeout
value for actually reporting back times. This allows a
time provider attached to a slow source like a modem to
request that dtsd wait for a longer interval.
Default: 0-00:00:05.000
Value: 0-00:00:00.000 - 0-00:01:00.000
maximum inaccuracy [relative-time]
Specifies the inaccuracy limit for the node. When the node
exceeds the maximum inaccuracy setting, it attempts to
synchronize.
Default: 0-00:00:00.100
Value: 0-00:00:00.000 - 10675199-02:48:05.000
query attempts [integer]
Specifies the number of attempts that a node makes to
contact a server before the node considers the server
unavailable.
Default: 3
Value: 1-10
server entry name [name]
Specifies a server's CDS entry name; hostname represents
the name of the system or node that is the server's
client. The default setting is the recommended value.
Default: /.:/hosts/hostname/dts-entity
server group name [name]
Specifies the name of the security group that DTS uses
for authentication checks. DTS clerks and servers do not
accept time values from DTS servers that are not included
in this group.
server principal name [name]
Specifies a server's principal name for authentication
purposes; hostname represents the name of the system or
node that is the server's client. The default setting is
the recommended value.
Default: /.:/hosts/hostname/self
servers required [integer]
Specifies the minimum number of servers required for a
synchronization. Settings of 1 or 2 may cause unreliable
computed times.
Default: 1 (clerks) 3 (servers)
Value: 1-10
synchronization hold down [relative-time]
Specifies the interval a node must wait to synchronize.
Also specifies synchronization frequency when a node
reaches the value specified by the maximum inaccuracy
characteristic.
Clerks:
Default: 0-00:10:00.000
Value: 0-00:00:30.000 - 01-00:00:00.000
Servers:
Default: 0-00:02:00.000
Value: 0-00:00:30.000 - 01-00:00:00.000
Privilege Required
You must have write permission on the ACL associated with the DTS
entity in order to execute the command.
NOTES
This command is replaced at Revision 1.1 by the dcecp command and
may not be provided in future releases of DCE.
The following two commands are obsolete. Use the replacements shown.
set lan timeout
This command is the same as set local set timeout.
set wan timeout
This command is the same as set global set timeout.
EXAMPLES
1. The following example command sets the check interval
characteristic to 30 seconds:
dtscp> set check interval 00-00:00:30.000
2. The following example shows how to set the number of servers
required before the entity can synchronize:
dtscp> set servers required 4
3. The following example shows how to set the courier role for
a server:
dtscp> set courier role backup courier
4. The following example command sets the error tolerance
characteristic to seven minutes:
dtscp> set error tolerance 0-00:07:00.000
5. The following example command the global set timeout
characteristic to 45 seconds:
dtscp> set global set timeout 0-00:00:45.000
6. The following example command the local set timeout characteristic
to five seconds:
dtscp> set local set timeout 0-00:00:05.000
7. The following example command sets the maximum inaccuracy
characteristic to three milliseconds:
dtscp> set maximum inaccuracy 0-00:00:00.300
8. The following example command sets the server entry name
characteristic to /.:/hosts/orion/dts-entity:
dtscp> set server entry name /.:/hosts/orion/dts-entity
9. The following example command sets the server principal name
characteristic to /.:/hosts/vega/dts-entity:
dtscp> set server principal name /.:/hosts/vega/dts-entity
10. The following example command sets the synchronization hold down
characteristic to 15 minutes:
dtscp> set synchronization hold down 0-00:15:00.000
RELATED INFORMATION
Commands: show
|
|
