1 POSIX_Threads
The POSIX Threads Library is Compaq's multithreading run-time
library package. It offers access to library routines via several
interfaces. The Threads Library offers two primary interfaces:
o The PTHREAD multithreading interface is Compaq's
implementation of the IEEE POSIX 1003.1c-1995 standard. Use
this interface to build portable, multithreaded applications.
o The Compaq proprietary TIS interface offers routines that
provide "thread-independent services." These routines
allow a program to perform (or a library to offer) thread-
safe processing that requires synchronization, but without
requiring the use of threads.
A thread is a single, sequential flow of control within a
program. Use threads to improve a program's performance-that
is, its throughput, computational speed, responsiveness, or some
combination. Multiple threads are useful in a multiprocessor
system, where a program's threads can run concurrently on
separate processors. On single-processor systems, multiple
threads can also improve a program's performance by permitting
the overlap of input, output, or other slow operations with
computational operations. For more information see the Guide
to the POSIX Threads Library documentation.
2 PTHREAD_routines
Routines that comprise the multithreading pthread interface are
based on the IEEE POSIX 1003.1-1996 standard. The global errno
variable is not used by these routines. To indicate errors,
the PTHREAD routines return integer values indicating the type
of error. Routine names ending with the _np suffix denote that
the routine is not portable; that is, the routine might not be
available in implementations of POSIX 1003.1-1996 other than
the Threads Library. See the Guide to the POSIX Threads Library
documentation for more information.
3 pthread_attr_destroy
Destroys a thread attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_destroy (
pthread_attr_t *attr);
4 Arguments
attr
Thread attributes object to be destroyed.
4 Description
This routine destroys a thread attributes object. Call this
routine when a thread attributes object will no longer be
referenced.
Threads that were created using this thread attributes object are
not affected by the destruction of the thread attributes object.
The results of calling this routine are unpredictable if
the value specified by the attr argument refers to a thread
attributes object that does not exist.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
4 Associated_Routines
pthread_attr_init()
pthread_create()
3 pthread_attr_getdetachstate
Obtains the detachstate attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_getdetachstate (
const pthread_attr_t *attr,
int *detachstate);
4 Arguments
attr
Thread attributes object whose detachstate attribute is obtained.
detachstate
Receives the value of the detachstate attribute.
4 Description
This routine obtains the detachstate attribute of a thread
attributes object. This attribute specifies whether threads
created using the specified thread attributes object are created
in a detached state.
On successful completion, this routine returns a zero and the
detachstate attribute is set in detachstate. A value of PTHREAD_
CREATE_JOINABLE indicates the thread is not detached, and a value
of PTHREAD_CREATE_DETACHED indicates the thread is detached.
See the pthread_attr_setdetachstate() description for information
about the detachstate attribute.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr does not refer to an
existing thread attributes object.
4 Associated_Routines
pthread_attr_init()
pthread_attr_setdetachstate()
3 pthread_attr_getguardsize
Obtains the guardsize attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_getguardsize (
const pthread_attr_t *attr,
size_t *guardsize);
4 Arguments
attr
Address of the thread attributes object whose guardsize attribute
is obtained.
guardsize
Receives the value of the guardsize attribute of the thread
attributes object specified by attr.
4 Description
This routine obtains the value of the guardsize attribute of
the thread attributes object specified in the attr argument and
stores it in the location specified by the guardsize argument.
The specified attributes object must already be initialized at
the time this routine is called.
When creating a thread, use a thread attributes object to specify
nondefault values for thread attributes. The guardsize attribute
of a thread attributes object specifies the minimum size (in
bytes) of the guard area for the stack of a new thread.
A guard area can help a multithreaded program detect the overflow
of a thread's stack. A guard area is a region of no-access memory
that the Threads Library allocates at the overflow end of the
thread's stack. When any thread attempts to access a memory
location within this region, a memory addressing violation
occurs.
Note that the value of the guardsize attribute of a particular
thread attributes object does not necessarily correspond to the
actual size of the guard area of any existing thread in your
multithreaded program.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr does not refer to an
existing thread attributes object.
4 Associated_Routines
pthread_attr_init()
pthread_attr_setguardsize()
pthread_attr_setstacksize()
pthread_create()
3 pthread_attr_getinheritsched
Obtains the inherit scheduling attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_getinheritsched (
const pthread_attr_t *attr,
int *inheritsched);
4 Arguments
attr
Thread attributes object whose inherit scheduling attribute is
obtained.
inheritsched
Receives the value of the inherit scheduling attribute. Refer to
the description of the pthread_attr_setinheritsched() function
for valid values.
4 Description
This routine obtains the value of the inherit scheduling
attribute from the specified thread attributes object. The
inherit scheduling attribute specifies whether threads created
using the attributes object inherit the scheduling attributes of
the creating thread, or use the scheduling attributes stored in
the attributes object that is passed to pthread_create().
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
4 Associated_Routines
pthread_attr_init()
pthread_attr_setinheritsched()
pthread_create()
3 pthread_attr_getname_np
Obtains the object name attribute from a thread attributes
object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_getname_np (
const pthread_attr_t *attr,
char *name,
size_t len,
void **mbz);
4 Arguments
attr
Address of the thread attributes object whose object name
attribute is to be obtained.
name
Location to store the obtained object name.
len
Length in bytes of buffer at the location specified by name.
mbz
Reserved for future use. The value must be zero (0).
4 Description
This routine copies the object name attribute from the thread
attributes object specified by the attr argument to the buffer
at the location specified by the name argument. Before calling
this routine, your program must allocate the buffer indicated by
name. A new thread created using the thread attributes object is
initialized with the object name that was set in that attributes
object.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
If the specified thread attributes object has not been previously
set with an object name, this routine copies a C language null
string into the buffer at location name.
This routine contrasts with pthread_getname_np(), which obtains
the object name from the thread object for an existing thread.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
4 Associated_Routines
pthread_getname_np()
pthread_attr_setname_np()
pthread_setname_np()
3 pthread_attr_getschedparam
Obtains the scheduling parameters for an attribute of the
specified thread attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_getschedparam (
const pthread_attr_t *attr,
struct sched_param *param);
4 Arguments
attr
Thread attributes object of the scheduling policy attribute whose
parameters are obtained.
param
Receives the values of scheduling parameters for the scheduling
policy attribute of the attributes object specified by the
attr argument. Refer to the description of the pthread_attr_
setschedparam() routine for valid parameters and their values.
4 Description
This routine obtains the scheduling parameters associated
with the scheduling policy attribute of the specified thread
attributes object.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
4 Associated_Routines
pthread_attr_init()
pthread_attr_setschedparam()
pthread_create()
3 pthread_attr_getschedpolicy
Obtains the scheduling policy attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_getschedpolicy (
const pthread_attr_t *attr,
int *policy);
4 Arguments
attr
Thread attributes object whose scheduling policy attribute is
obtained.
policy
Receives the value of the scheduling policy attribute. Refer to
the description of the pthread_attr_setschedpolicy() routine for
valid values.
4 Description
This routine obtains the value of the scheduling policy attribute
of the specified thread attributes object. The scheduling policy
attribute defines the scheduling policy for threads created using
the attributes object.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
4 Associated_Routines
pthread_attr_init()
pthread_attr_setschedpolicy()
pthread_create()
3 pthread_attr_getscope
Obtains the contention scope attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_getscope (
const pthread_attr_t *attr,
int *scope);
4 Arguments
attr
Address of the thread attributes object whose contention scope
attribute is obtained.
scope
Receives the value of the contention scope attribute of the
thread attributes object specified by attr.
4 Description
This routine obtains the value of the contention scope attribute
of the thread attributes object specified in the attr argument
and stores it in the location specified by the scope argument.
The specified attributes object must already be initialized at
the time this routine is called.
The contention scope attribute specifies the set of threads
with which a thread must compete for processing resources. The
contention scope attribute specifies whether the new thread
competes for processing resources only with other threads in its
own process, called process contention scope, or with all threads
on the system, called system contention scope.
The Threads Library selects at most one thread to execute on
each processor at any point in time. The Threads Library resolves
the contention based on each thread's scheduling attributes (for
example, priority) and scheduling policy (for example, round-
robin).
A thread created using a thread attributes object whose
contention scope attribute is set to PTHREAD_SCOPE_PROCESS
contends for processing resources with other threads within its
own process that also were created with PTHREAD_SCOPE_PROCESS.
It is unspecified how such threads are scheduled relative to
threads in other processes or threads in the same process that
were created with PTHREAD_SCOPE_SYSTEM contention scope.
A thread created using a thread attributes object whose
contention scope attribute is set to PTHREAD_SCOPE_SYSTEM
contends for processing resources with other threads in any
process that also were created with PTHREAD_SCOPE_SYSTEM.
Note that the value of the contention scope attribute of a
particular thread attributes object does not necessarily
correspond to the actual scheduling contention scope of any
existing thread in your multithreaded program.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
[ENOSYS] This routine is not supported by the implementation.
4 Associated_Routines
pthread_attr_init()
pthread_attr_setscope()
3 pthread_attr_getstackaddr
Obtains the stack address attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_getstackaddr (
const pthread_attr_t *attr,
void **stackaddr);
4 Arguments
attr
Address of the thread attributes object whose stack address
attribute is obtained.
stackaddr
Receives the value of the stack address attribute of the thread
attributes object specified by attr.
4 Description
This routine obtains the value of the stack address attribute of
the thread attributes object specified in the attr argument and
stores it in the location specified by the stackaddr argument.
The specified attributes object must already be initialized when
this routine is called.
The stack address attribute of a thread attributes object points
to the origin of the stack for a new thread.
Note that the value of the stack address attribute of a
particular thread attributes object does not necessarily
correspond to the actual stack origin of any existing thread
in your multithreaded program.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
4 Associated_Routines
pthread_attr_getguardsize()
pthread_attr_getstacksize()
pthread_attr_init()
pthread_attr_setguardsize()
pthread_attr_setstackaddr()
pthread_attr_setstacksize()
pthread_create()
3 pthread_attr_getstackaddr_np
Obtains the stack address attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_getstackaddr (
const pthread_attr_t *attr,
void **stackaddr,
size_t *size);
4 Arguments
attr
Address of the thread attributes object whose stack address
attribute is obtained.
stackaddr
Receives the address of the stack region of the thread attributes
object specified by attr.
size
The size of the stack region in bytes.
4 Description
This routine obtains the value of the stack address attribute of
the thread attributes object specified in the attr argument and
stores it in the location specified by the stackaddr argument.
The specified attributes object must already be initialized when
this routine is called.
The stack address attribute of a thread attributes object points
to the origin of the stack for a new thread.
Unlike pthread_attr_getstackaddr(), this routine is a much more
reliable portable interface. With the POSIX standard pthread_
attr_getstackaddr(), a stack is specified using a single,
undefined, address. An implementation of the standard can only
assume that the specified value represents the value to which the
thread's stack pointer should be set when beginning execution.
However, this requires the application to know how the machine
uses the stack. For example, a stack may "grow" either up (to
higher addresses) or down (to lower addresses), and may be
decreased (or increased) either before or after storing a new
value.
The Threads Library provides an alternative interface with
pthread_attr_getstackaddr_np(). Instead of returning a stack
address, it returns the base (lowest) address and the size.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
4 Associated_Routines
pthread_attr_setstackaddr_np()
3 pthread_attr_getstacksize
Obtains the stacksize attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_getstacksize (
const pthread_attr_t *attr,
size_t *stacksize);
4 Arguments
attr
Thread attributes object whose stacksize attribute is obtained.
stacksize
Receives the value for the stacksize attribute of the thread
attributes object specified by the attr argument.
4 Description
This routine obtains the stacksize attribute of the thread
attributes object specified in the attr argument.
4 Return_Values
On successful completion, this routine returns a zero (0) and
the stacksize value in bytes in the location specified in the
stacksize argument.
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid stack
attributes object.
4 Associated_Routines
pthread_attr_init()
pthread_attr_setstacksize()
pthread_create()
3 pthread_attr_init
Initializes a thread attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_init (
pthread_attr_t *attr);
4 Arguments
attr
Address of a thread attributes object to be initialized.
4 Description
This routine initializes the thread attributes object specified
by the attr argument with a set of default attribute values. A
thread attributes object is used to specify the attributes of
one or more threads when they are created. The attributes object
created by this routine is used only in calls to the pthread_
create() routine.
The following routines change individual attributes of an
initialized thread attributes object:
pthread_attr_setdetachstate()
pthread_attr_setguardsize()
pthread_attr_setinheritsched()
pthread_attr_setschedparam()
pthread_attr_setschedpolicy()
pthread_attr_setscope()
pthread_attr_setstackaddr()
pthread_attr_setstacksize()
The attributes of the thread attributes object are initialized to
default values. The default value of each attribute is discussed
in the reference description for each routine previously listed.
When a thread attributes object is used to create a thread,
the object's attribute values determine the characteristics
of the new thread. Thus, attributes objects act as additional
arguments to thread creation. Changing the attributes of a
thread attributes object does not affect any threads that were
previously created using that attributes object.
You can use the same thread attributes object in successive calls
to pthread_create(), from any thread. (However, you cannot use
the same value of the stack address attribute to create multiple
threads that might run concurrently; threads cannot share a
stack.) If more than one thread might change the attributes in
a shared attributes object, your program must use a mutex to
protect the integrity of the attributes object's contents.
When you set the scheduling policy or scheduling parameters,
or both, in a thread attributes object, you must disable
scheduling inheritance if you want the scheduling attributes
you set to be used at thread creation. To disable scheduling
inheritance, before creating the new thread use the pthread_attr_
setinheritsched() routine to specify the value PTHREAD_EXPLICIT_
SCHED for the inherit argument.
4 Return_Values
If an error condition occurs, the thread attributes object cannot
be used, and this routine returns an integer value indicating the
type of error. Possible return values are as follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
[ENOMEM] Insufficient memory to initialize the thread
attributes object.
4 Associated_Routines
pthread_attr_destroy()
pthread_attr_setdetachstate()
pthread_attr_setguardsize()
pthread_attr_setinheritsched()
pthread_attr_setschedparam()
pthread_attr_setschedpolicy()
pthread_attr_setscope()
pthread_attr_setstackaddr()
pthread_attr_setstacksize()
pthread_create()
3 pthread_attr_setdetachstate
Changes the detachstate attribute in the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_setdetachstate (
pthread_attr_t *attr,
int detachstate);
4 Arguments
attr
Thread attributes object to be modified.
detachstate
New value for the detachstate attribute. Valid values are as
follows:
PTHREAD_CREATE_ This is the default value. Threads are
JOINABLE created in "undetached" state.
PTHREAD_CREATE_ The created thread is detached immediately,
DETACHED before it begins running.
4 Description
This routine changes the detachstate attribute in the thread
attributes object specified by the attr argument. The detachstate
attribute specifies whether the thread created using the
specified thread attributes object is created in a detached state
or not. A value of PTHREAD_CREATE_JOINABLE indicates the thread
is not detached, and a value of PTHREAD_CREATE_DETACHED indicates
the thread is detached. PTHREAD_CREATE_JOINABLE is the default
value.
Your program cannot use the thread handle (the value of type
pthread_t returned by the pthread_create() routine) of a detached
thread because the thread might terminate asynchronously, and a
detached thread ID is not valid after termination. In particular,
it is an error to attempt to detach or join with a detached
thread.
When a thread that has not been detached completes execution,
the Threads Library retains the state of that thread to allow
another thread to join with it. If the thread is detached
before it completes execution, the Threads Library is free to
immediately reclaim the thread's storage and resources. Failing
to detach threads that have completed execution can result in
wasting resources, so threads should be detached as soon as
the program is done with them. If there is no need to use the
thread's handle after creation, such as to join with it, create
the thread initially detached.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by the attr argument is not a
valid threads attribute object or the detachstate
argument is invalid.
4 Associated_Routines
pthread_attr_init()
pthread_attr_getdetachstate()
pthread_create()
pthread_join()
3 pthread_attr_setguardsize
Changes the guardsize attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_setguardsize (
pthread_attr_t *attr,
size_t guardsize);
4 Arguments
attr
Address of the thread attributes object whose guardsize attribute
is to be modified.
guardsize
New value for the guardsize attribute of the thread attributes
object specified by attr.
4 Description
This routine uses the value specified in the guardsize argument
to set the guardsize attribute of the thread attributes object
specified in the attr argument.
When creating a thread, use a thread attributes object to specify
nondefault values for thread attributes. The guardsize attribute
of a thread attributes object specifies the minimum size (in
bytes) of the guard area for the stack of a new thread.
A guard area, with its associated overflow warning area, can
help a multithreaded program detect overflow of a thread's
stack. A guard area is a region of no-access memory that the
Threads Library allocates at the overflow end of the thread's
stack, following the thread's overflow warning area. If the
thread attempts to write in the overflow warning area, a stack
overflow exception occurs. Your program can catch this exception
and continue processing as long as the thread does not attempt
to write in the guard area. When any thread attempts to access
a memory location within the guard area, a memory addressing
violation occurs without the possibility of recovery.
A new thread can be created with a default guardsize attribute
value. This value is platform dependent, but will always be
at least one "hardware protection unit" (that is, at least one
page). For more information, see this guide's platform-specific
appendixes.
After this routine is called, due to platform-specific factors
the Threads Library might reserve a larger guard area for the
new thread than was specified in the guardsize argument. See this
guide's platform-specific appendixes for more information.
The Threads Library allows your program to specify the size of a
thread stack's guard area for two reasons:
o When a thread allocates large data structures on its stack, a
guard area with a size greater than the default size might be
required to detect stack overflow.
o Overflow protection of a thread's stack can potentially waste
system resources, such as for an application that creates a
large number of threads that will never overflow their stacks.
Your multithreaded program can conserve system resources
by "turning off" a thread's stack guard area-that is, by
specifying a guardsize attribute of zero.
If a thread is created using a thread attributes object whose
stackaddr attribute is set (using the pthread_attr_setstackaddr()
routine), this routine ignores the object's guardsize attribute
and provides no thread stack overflow warning or guard area for
the new thread.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The argument attr is not a valid thread attributes
object, or the argument guardsize contains an invalid
value.
4 Associated_Routines
pthread_attr_init()
pthread_attr_getguardsize()
pthread_attr_setstacksize()
pthread_create()
3 pthread_attr_setinheritsched
Changes the inherit scheduling attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_setinheritsched (
pthread_attr_t *attr,
int inheritsched);
4 Arguments
attr
Thread attributes object whose inherit scheduling attribute is to
be modified.
inheritsched
New value for the inherit scheduling attribute. Valid values are
as follows:
PTHREAD_INHERIT_ The created thread inherits the
SCHED scheduling policy and associated
scheduling attributes of the thread
calling pthread_create(). Any scheduling
attributes in the attributes object
specified by the pthread_create() attr
argument are ignored during thread
creation. This is the default value.
PTHREAD_EXPLICIT_ The scheduling policy and associated
SCHED scheduling attributes of the created
thread are set to the corresponding
values from the attribute object
specified by the pthread_create() attr
argument.
4 Description
This routine changes the inherit scheduling attribute of the
thread attributes object specified by the attr argument. The
inherit scheduling attribute specifies whether a thread created
using the specified attributes object inherits the scheduling
attributes of the creating thread, or uses the scheduling
attributes stored in the attributes object specified by the
pthread_create() attr argument.
The first thread in an application has a scheduling policy of
SCHED_OTHER. See the pthread_attr_setschedparam() and pthread_
attr_setschedpolicy() routines for more information on valid
priority values and valid scheduling policy values.
Inheriting scheduling attributes (instead of using the scheduling
attributes stored in the attributes object) is useful when a
thread is creating several helper threads-that is, threads
that are intended to work closely with the creating thread to
cooperatively solve the same problem. For example, inherited
scheduling attributes ensure that helper threads created in
a sort routine execute with the same priority as the calling
thread.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by the attr argument is not a
valid thread attributes object, or the inheritsched
argument contains an invalid value.
[ENOTSUP] An attempt was made to set the attribute to an
unsupported value.
4 Associated_Routines
pthread_attr_init()
pthread_attr_getinheritsched()
pthread_attr_setschedpolicy()
pthread_attr_setschedparam()
pthread_attr_setscope()
pthread_create()
3 pthread_attr_setname_np
Changes the object name attribute in a thread attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_setname_np (
pthread_attr_t *attr,
const char *name,
void *mbz);
4 Arguments
attr
Address of the thread attributes object whose object name
attribute is to be changed.
name
Object name value to copy into the thread attributes object's
object name attribute.
mbz
Reserved for future use. The value must be zero (0).
4 Description
This routine changes the object name attribute in the thread
attributes object specified by the attr argument to the value
specified by the name argument. A new thread created using the
thread attributes object is initialized with the object name that
was set in that attributes object.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
This routine contrasts with pthread_setname_np(), which changes
the object name in the thread object for an existing thread.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object, or the length in characters of
name exceeds 31.
[ENOMEM] Insufficient memory exists to create a copy of the
object name string.
4 Associated_Routines
pthread_attr_getname_np()
pthread_getname_np()
pthread_setname_np()
3 pthread_attr_setschedparam
Changes the values of the parameters associated with a scheduling
policy of the specified thread attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_setschedparam (
pthread_attr_t *attr,
const struct sched_param *param);
4 Arguments
attr
Thread attributes object for the scheduling policy attribute
whose parameters are to be set.
param
A structure containing new values for scheduling parameters
associated with the scheduling policy attribute of the specified
thread attributes object.
NOTE
The Threads Library provides only the sched_priority
scheduling parameter. See below for information about this
scheduling parameter.
4 Description
This routine sets the scheduling parameters associated with
the scheduling policy attribute of the thread attributes object
specified by the attr argument.
Scheduling Priority
Use the sched_priority field of a sched_param structure to set
a thread's execution priority. The effect of the scheduling
priority you assign depends on the scheduling policy specified
for the attributes object specified by the attr argument.
By default, a created thread inherits the priority of the thread
calling pthread_create(). To specify a priority using this
routine, scheduling inheritance must be disabled at the time the
thread is created. Before calling pthread_create(), call pthread_
attr_setinheritsched() and specify the value PTHREAD_EXPLICIT_
SCHED for the inherit argument.
An application specifies priority only to express the urgency
of executing the thread relative to other threads. Do not use
priority to control mutual exclusion when you are accessing
shared data. With a sufficient number of processors present, all
ready threads, regardless of priority, execute simultaneously.
Even on a uniprocessor, a lower priority thread could either
execute before or be interleaved with a higher priority thread,
for example due to page fault behavior. See <REFERENCE>(intro_
threads_chap) and <REFERENCE>(threads_concepts_chap) for more
information.
Valid values of the sched_priority scheduling parameter depend on
the chosen scheduling policy. Use the POSIX routines sched_get_
priority_min() or sched_get_priority_max() to determine the low
and high limits of each policy.
Additionally, the Threads Library provides nonportable priority
range constants, as follows:
Policy Low High
SCHED_FIFO PRI_FIFO_MIN PRI_FIFO_MAX
SCHED_RR PRI_RR_MIN PRI_RR_MAX
SCHED_OTHER PRI_OTHER_MIN PRI_OTHER_MAX
SCHED_FG_NP PRI_FG_MIN_NP PRI_FG_MAX_NP
SCHED_BG_NP PRI_BG_MIN_NP PRI_BG_MAX_NP
The default priority varies by platform. On Tru64 UNIX, the
default is 19 (that is, the POSIX priority of a normal timeshare
process). On other platforms, the default priority is the
midpoint between PRI_FG_MIN_NP and PRI_FG_MAX_NP.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object, or the value specified by param is
invalid.
[ENOTSUP] An attempt was made to set the attribute to an
unsupported value.
4 Associated_Routines
pthread_attr_init()
pthread_attr_getschedparam()
pthread_attr_setinheritsched()
pthread_attr_setschedpolicy()
pthread_create()
sched_yield()
3 pthread_attr_setschedpolicy
Changes the scheduling policy attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_setschedpolicy (
pthread_attr_t *attr,
int policy);
4 Arguments
attr
Thread attributes object to be modified.
policy
New value for the scheduling policy attribute. Valid values are
as follows:
SCHED_BG_NP
SCHED_FG_NP (also known as SCHED_OTHER)
SCHED_FIFO
SCHED_RR
SCHED_OTHER is the default value.
4 Description
This routine sets the scheduling policy of a thread that is
created using the attributes object specified by the attr
argument. The default value of the scheduling attribute is SCHED_
OTHER.
By default, a created thread inherits the policy of the thread
calling pthread_create(). To specify a policy using this routine,
scheduling inheritance must be disabled at the time the thread
is created. Before calling pthread_create(), call pthread_attr_
setinheritsched() and specify the value PTHREAD_EXPLICIT_SCHED
for the inherit argument.
Preemption is caused by both scheduling and policy. Never attempt
to use scheduling as a mechanism for synchronization.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object, or the value specified by policy
is invalid.
4 Associated_Routines
pthread_attr_init()
pthread_attr_getschedpolicy()
pthread_attr_setinheritsched()
pthread_attr_setschedparam()
pthread_create()
3 pthread_attr_setscope
Sets the contention scope attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_setscope (
pthread_attr_t *attr,
int scope);
4 Arguments
attr
Address of the thread attributes object whose contention scope
attribute is to be modified.
scope
New value for the contention scope attribute of the thread
attributes object specified by attr.
4 Description
This routine uses the value specified in the scope argument
to set the contention scope attribute of the thread attributes
object specified in the attr argument.
When creating a thread, use a thread attributes object to specify
nondefault values for thread attributes. The contention scope
attribute specifies the set of threads with which a thread must
compete for processing resources. The contention scope attribute
specifies whether the new thread competes for processing
resources only with other threads in its own process, called
process contention scope, or with all threads on the system,
called system contention scope.
The Threads Library selects at most one thread to execute on
each processor at any point in time. The Threads Library resolves
the contention based on each thread's scheduling attributes (for
example, priority) and scheduling policy (for example, round-
robin).
A thread created using a thread attributes object whose
contention scope attribute is set to PTHREAD_SCOPE_PROCESS
contends for processing resources with other threads within its
own process that also were created with PTHREAD_SCOPE_PROCESS. It
is unspecified how such threads are scheduled relative to either
threads in other processes or threads in the same process that
were created with PTHREAD_SCOPE_SYSTEM contention scope.
A thread created using a thread attributes object whose
contention scope attribute is set to PTHREAD_SCOPE_SYSTEM
contends for processing resources with other threads in any
process that also were created with PTHREAD_SCOPE_SYSTEM.
Note that the value of the contention scope attribute of a
particular thread attributes object does not necessarily
correspond to the actual scheduling contention scope of any
existing thread in your multithreaded program.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes value, or the value specified by scope is
not valid.
[ENOTSUP] An attempt was made to set the attribute to an
unsupported value.
4 Associated_Routines
pthread_attr_destroy()
pthread_attr_init()
pthread_attr_getscope()
pthread_attr_setinheritsched()
pthread_create()
3 pthread_attr_setstackaddr
Changes the stack address attribute of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_setstackaddr (
pthread_attr_t *attr,
void *stackaddr);
4 Arguments
attr
Address of the thread attributes object whose stack address
attribute is to be modified.
stackaddr
New value for the stack address attribute of the thread
attributes object specified by attr.
4 Description
This routine uses the value specified in the stackaddr argument
to set the stack address attribute of the thread attributes
object specified in the attr argument.
When creating a thread, use a thread attributes object to specify
nondefault values for thread attributes. The stack address
attribute of a thread attributes object points to the origin
of the stack for a new thread.
The default value for the stack address attribute of an
initialized thread attributes object is NULL.
NOTE
Correct use of this routine depends upon details of the
target platform's stack architecture. Thus, this routine
cannot be used in a portable manner.
The size of the stack must be at least PTHREAD_STACK_MIN
bytes (see the pthread.h header file). However, because the
Threads Library must use a portion of this stack memory to
begin thread execution and to maintain thread state, your
program's "user thread code" cannot rely on using all of the
stack memory allocated.
For your program to calculate a value for the stackaddr
attribute, note that:
o Your program must allocate the memory that will be used for
the new thread's stack.
o On Tru64 UNIX, to create a new thread using a thread
attributes object, the stackaddr attribute must be an address
that points to the high-memory end of the memory region
allocated for the stack. This address must point to the
highest even-boundary quadword in the allocated memory region.
Also note that:
o If you use the pthread_attr_setstackaddr() routine to set a
thread attributes object's stack address attribute and use
that attributes object to create a new thread, the Threads
Library ignores the attributes object's guardsize attribute
and provides no thread stack guard area or overflow warning
area for the new thread.
o If you use the same thread attributes object to create more
than one thread and each created thread uses a nondefault
stack address, you must use the pthread_attr_setstackaddr()
routine to set a unique stack address attribute value for each
new thread created using that attributes object.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
4 Associated_Routines
pthread_attr_getguardsize()
pthread_attr_getstackaddr()
pthread_attr_getstacksize()
pthread_attr_init()
pthread_attr_setguardsize()
pthread_attr_setstacksize()
pthread_create()
3 pthread_attr_setstackaddr_np
Changes the stack address and size of the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_setstackaddr_np (
pthread_attr_t *attr,
void *stackaddr,
size_t size);
4 Arguments
attr
Address of the thread attributes object whose stack address
attribute is to be modified.
stackaddr
New value for the address of the stack region of the thread
attributes object specified by attr.
size
The size of the stack region in bytes.
4 Description
This routine uses the values specified in the stackaddr and size
arguments to set the base stack address and size of the thread
attributes object specified in the attr argument.
When creating a thread, use a thread attributes object to specify
nondefault values for thread attributes. The default value for
the stack address attribute of an initialized thread attributes
object is NULL.
Unlike pthread_attr_setstackaddr(), this routine is a much more
reliable portable interface. With the POSIX standard pthread_
attr_setstackaddr(), a stack is specified using a single,
undefined, address. An implementation of the standard can only
assume that the specified value represents the value to which the
thread's stack pointer should be set when beginning execution.
However, this requires the application to know how the machine
uses the stack. For example, a stack may "grow" either up (to
higher addresses) or down (to lower addresses), and may be
decreased (or increased) either before or after storing a new
value.
The Threads Library provides an alternative interface with
pthread_attr_setstackaddr_np(). Instead of specifying a stack
address, you specify the base (lowest) address and the size.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object.
4 Associated_Routines
pthread_attr_getstackaddr_np()
3 pthread_attr_setstacksize
Changes the stacksize attribute in the specified thread
attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_attr_setstacksize (
pthread_attr_t *attr,
size_t stacksize);
4 Arguments
attr
Threads attributes object to be modified.
stacksize
New value for the stacksize attribute of the thread attributes
object specified by the attr argument. The stacksize argument
must be greater than or equal to PTHREAD_STACK_MIN. PTHREAD_
STACK_MIN specifies the minimum size (in bytes) of the stack
needed for a thread.
4 Description
This routine sets the stacksize attribute in the thread
attributes object specified by the attr argument. Use this
routine to adjust the size of the writable area of the stack
for a new thread.
The size of a thread's stack is fixed at the time of thread
creation. On OpenVMS systems, only the initial thread can
dynamically extend its stack. On Tru64 UNIX systems, very large
stacks can be created, but only a few pages are committed.
Many compilers do not check for stack overflow. Ensure that the
new thread's stack is sufficient for the resources required by
routines that are called from the thread.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid thread
attributes object, or the value specified by
stacksize either is less than PTHREAD_STACK_MIN or
exceeds a Threads Library-imposed limit.
4 Associated_Routines
pthread_attr_init()
pthread_attr_getstacksize()
pthread_create()
3 pthread_cancel
Allows a thread to request a thread to terminate execution.
4 C_Binding
#include <pthread.h>
int
pthread_cancel (
pthread_t thread);
4 Arguments
thread
Thread that will receive a cancelation request.
4 Description
This routine sends a cancelation request to the specified target
thread. A cancelation request is a mechanism by which a calling
thread requests the target thread to terminate as quickly as
possible. Issuing a cancelation request does not guarantee that
the target thread will receive or handle the request.
When the cancelation request is acted on, all active cleanup
handler routines for the target thread are called. When the last
cleanup handler returns, the thread-specific data destructor
routines are called for each thread-specific data key with a
destructor and for which the target thread has a non-NULL value.
Finally, the target thread is terminated.
Note that cancelation of the target thread runs asynchronously
with respect to the calling thread's returning from pthread_
cancel(). The target thread's cancelability state and type
determine when or if the cancelation takes place, as follows:
1. The target thread can delay cancelation during critical
operations by setting its cancelability state to PTHREAD_
CANCEL_DISABLE.
2. Because of communication delays, the calling thread can only
rely on the fact that a cancelation request will eventually
become pending in the target thread (provided that the target
thread does not terminate beforehand).
3. The calling thread has no guarantee that a pending cancelation
request will be delivered because delivery is controlled by
the target thread.
When a cancelation request is delivered to a thread, termination
processing is similar to that for pthread_exit(). For more
information about thread termination, see the Thread Termination
section of pthread_create().
This routine is preferred in implementing an Ada abort statement
and any other language- or software-defined construct for
requesting thread cancelation.
The results of this routine are unpredictable if the value
specified in thread refers to a thread that does not currently
exist.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The specified thread is invalid.
[ESRCH] The thread argument does not specify an existing
thread.
4 Associated_Routines
pthread_cleanup_pop()
pthread_cleanup_push()
pthread_create()
pthread_exit()
pthread_join()
pthread_setcancelstate()
pthread_setcanceltype()
pthread_testcancel()
3 pthread_cleanup_pop
(Macro) Removes the cleanup handler routine from the calling
thread's cleanup handler stack and optionally executes it.
4 C_Binding
#include <pthread.h>
void
pthread_cleanup_pop(
int execute);
4 Arguments
execute
Integer that specifies whether the cleanup handler routine
specified in the matching call to pthread_cleanup_push() is
executed. A nonzero value causes the cleanup handler routine
to be executed.
4 Description
This routine removes the cleanup handler routine established by
the matching call to pthread_cleanup_push() from the calling
thread's cleanup handler stack, then executes it if the value
specified in this routine's execute argument is nonzero.
A cleanup handler routine can be used to clean up from a block
of code whether exited by normal completion, cancelation, or the
raising (or reraising) of an exception. The routine is popped
from the calling thread's cleanup handler stack and is called
with the arg argument (see the description for pthread_cleanup_
push()) when any of the following actions occur:
o The thread calls pthread_cleanup_pop() and specifies a nonzero
value for the execute argument.
o The thread calls pthread_exit().
o The thread is canceled.
o An exception is raised and is caught when the Threads Library
unwinds the calling thread's stack to the lexical scope of the
pthread_cleanup_push() and pthread_cleanup_pop() pair.
This routine and pthread_cleanup_push() are implemented as
macros and must appear as statements and in pairs within the
same lexical scope. You can think of the pthread_cleanup_push()
macro as expanding to a string whose first character is a left
brace ({) and pthread_cleanup_pop() as expanding to a string
containing the corresponding right brace (}). This routine and
pthread_cleanup_push() are implemented as exceptions, and may not
work in a C++ environment. (See <REFERENCE>(exceptions_chap) for
more information.)
4 Return_Values
None
4 Associated_Routines
pthread_cancel()
pthread_cleanup_push()
pthread_create()
pthread_exit()
3 pthread_cleanup_push
(Macro) Establishes a cleanup handler routine to be executed when
the thread exits or is canceled.
4 C_Binding
#include <phtread.h>
void
pthread_cleanup_push(
void (*routine)(void *),
void *arg);
4 Arguments
routine
Routine executed as the cleanup handler.
arg
Argument passed to the cleanup handler routine.
4 Description
This routine pushes the specified routine onto the calling
thread's cleanup handler stack. The cleanup handler routine is
popped from the stack and called with the arg argument when any
of the following actions occur:
o The thread calls pthread_cleanup_pop() and specifies a nonzero
value for the execute argument.
o The thread calls pthread_exit().
o The thread is canceled.
o An exception is raised and is caught when the Threads Library
unwinds the calling thread's stack to the lexical scope of the
pthread_cleanup_push() and pthread_cleanup_pop() pair.
This routine and pthread_cleanup_pop() are implemented as macros
and must appear as statements and in pairs within the same
lexical scope. You can think of the pthread_cleanup_push() macro
as expanding to a string whose first character is a left brace
({) and pthread_cleanup_pop() as expanding to a string containing
the corresponding right brace (}). This routine and pthread_
cleanup_pop() are implemented as exceptions, and may not work
in a C++ environment. (See <REFERENCE>(exceptions_chap) for more
information.)
4 Return_Values
None
4 Associated_Routines
pthread_cancel()
pthread_cleanup_pop()
pthread_create()
pthread_exit()
pthread_testcancel()
3 pthread_condattr_destroy
Destroys a condition variable attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_condattr_destroy (
pthread_condattr_t *attr);
4 Arguments
attr
Condition variable attributes object to be destroyed.
4 Description
This routine destroys the specified condition variable attributes
object. Call this routine when a condition variable attributes
object will no longer be referenced.
Condition variables that were created using this attributes
object are not affected by the destruction of the condition
variable attributes object.
The results of calling this routine are unpredictable if the
value specified by the attr argument refers to a condition
variable attributes object that does not exist.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The attributes object specified by attr is invalid.
4 Associated_Routines
pthread_condattr_init()
3 pthread_condattr_init
Initializes a condition variable attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_condattr_init (
pthread_condattr_t *attr);
4 Arguments
attr
Address of the condition variable attributes object to be
initialized.
4 Description
This routine initializes the condition variable attributes object
specified by the attr argument with a set of default attribute
values.
When an attributes object is used to create a condition
variable, the values of the individual attributes determine the
characteristics of the new condition variable. Attributes objects
act as additional arguments to condition variable creation.
Changing individual attributes in an attributes object does not
affect any condition variables that were previously created using
that attributes object.
You can use the same condition variable attributes object in
successive calls to pthread_condattr_init(), from any thread.
If multiple threads can change attributes in a shared attributes
object, your program must use a mutex to protect the integrity of
that attributes object.
Results are undefined if this routine is called and the attr
argument specifies a condition variable attributes object that is
already initialized.
Currently, on OpenVMS systems, no attributes affecting condition
variables are defined; you cannot change any attributes in the
condition variable attributes object. On Tru64 UNIX systems, the
PSHARED attribute is defined.
The pthread_condattr_init() and pthread_condattr_destroy()
routines are provided for future expandability of the pthread
interface and to conform with the POSIX.1 standard. These
routines serve no useful function, because there are no pthread_
condattr_set*() type routines available at this time.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid condition
variable attributes object.
[ENOMEM] Insufficient memory exists to initialize the
condition variable attributes object.
4 Associated_Routines
pthread_condattr_destroy()
pthread_cond_init()
3 pthread_cond_broadcast
Wakes all threads that are waiting on the specified condition
variable.
4 C_Binding
#include <pthread.h>
int
pthread_cond_broadcast (
pthread_cond_t *cond);
4 Arguments
cond
Condition variable upon which the threads (to be awakened) are
waiting.
4 Description
This routine unblocks all threads waiting on the specified
condition variable cond. Calling this routine implies that data
guarded by the associated mutex has changed, so that it might be
possible for one or more waiting threads to proceed. The threads
that are unblocked shall contend for the mutex according to their
respective scheduling policies (if applicable).
If only one of the threads waiting on a condition variable may be
able to proceed, but one of those threads can proceed, then use
pthread_cond_signal() instead.
Whether the associated mutex is locked or unlocked, you can still
call this routine. However, if predictable scheduling behavior is
required, that mutex should then be locked by the thread calling
the pthread_cond_broadcast() routine.
If no threads are waiting on the specified condition variable,
this routine takes no action. The broadcast does not propagate to
the next condition variable wait.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond is not a valid condition
variable.
4 Associated_Routines
pthread_cond_destroy()
pthread_cond_init()
pthread_cond_signal()
pthread_cond_timedwait()
pthread_cond_wait()
3 pthread_cond_destroy
Destroys a condition variable.
4 C_Binding
#include <pthread.h>
int
pthread_cond_destroy (
pthread_cond_t *cond);
4 Arguments
cond
Condition variable to be destroyed.
4 Description
This routine destroys the condition variable specified by cond.
This effectively uninitializes the condition variable. Call this
routine when a condition variable will no longer be referenced.
Destroying a condition variable allows the Threads Library to
reclaim internal memory associated with the condition variable.
It is safe to destroy an initialized condition variable upon
which no threads are currently blocked. Attempting to destroy a
condition variable upon which other threads are blocked results
in unpredictable behavior.
The results of this routine are unpredictable if the condition
variable specified in cond either does not exist or is not
initialized.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond is not a valid condition
variable.
[EBUSY] The object being referenced by cond is being
referenced by another thread that is currently
executing
pthread_cond_wait() or pthread_cond_timedwait() on
the condition variable specified in cond.
4 Associated_Routines
pthread_cond_broadcast()
pthread_cond_init()
pthread_cond_signal()
pthread_cond_timedwait()
pthread_cond_wait()
3 pthread_cond_getname_np
Obtains the object name from a condition variable object.
4 C_Binding
#include <pthread.h>
int
pthread_cond_getname_np (
pthread_cond_t *cond,
char *name,
size_t len);
4 Arguments
cond
Address of the condition variable object whose object name is to
be obtained.
name
Location to store the obtained object name.
len
Length in bytes of buffer at the location specified by name.
4 Description
This routine copies the object name from the condition variable
object specified by the cond argument to the buffer at the
location specified by the name argument. Before calling this
routine, your program must allocate the buffer indicated by name.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
If the specified condition variable object has not been
previously set with an object name, this routine copies a C
language null string into the buffer at location name.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond is not a valid condition
variable.
4 Associated_Routines
pthread_cond_setname_np()
3 pthread_cond_init
Initializes a condition variable.
4 C_Binding
#include <pthread.h>
int
pthread_cond_init (
pthread_cond_t *cond,
const pthread_condattr_t *attr);
4 Arguments
cond
Condition variable to be initialized.
attr
Condition variable attributes object that defines the
characteristics of the condition variable to be initialized.
4 Description
This routine initializes the condition variable cond with
attributes specified in the attr argument. If attr is NULL, the
default condition variable attributes are used.
A condition variable is a synchronization object used in
conjunction with a mutex. A mutex controls access to data that
is shared among threads; a condition variable allows threads to
wait for that data to enter a defined state.
Condition variables are not owned by a particular thread. Any
associated storage is not automatically deallocated when the
creating thread terminates.
Use the macro PTHREAD_COND_INITIALIZER to initialize statically
allocated condition variables to the default condition variable
attributes. To invoke this macro, enter:
pthread_cond_t condition = PTHREAD_COND_INITIALIZER
When statically initialized, a condition variable should not also
be initialized using pthread_cond_init(). Also, a statically
initialized condition variable need not be destroyed using
pthread_cond_destroy().
Under certain circumstances it might be impossible to wait upon
a statically initialized condition variable when the process
virtual address space (or some other memory limit) is nearly
exhausted. In such a case pthread_cond_wait() or pthread_cond_
timedwait() can return [ENOMEM]. To avoid this possibility,
initialize critical condition variables using pthread_cond_
init().
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EAGAIN] The system lacks the necessary resources to
initialize another condition variable, or
The system-imposed limit on the total number of
condition variables under execution by a single user
is exceeded.
[EBUSY] The implementation has detected an attempt to
reinitialize the object referenced by cond, a
previously initialized, but not yet destroyed
condition variable.
[EINVAL] The value specified by attr is not a valid attributes
object.
[ENOMEM] Insufficient memory exists to initialize the
condition variable.
4 Associated_Routines
pthread_cond_broadcast()
pthread_cond_destroy()
pthread_cond_signal()
pthread_cond_timedwait()
pthread_cond_wait()
3 pthread_cond_setname_np
Changes the object name for a condition variable object.
4 C_Binding
#include <pthread.h>
int
pthread_cond_setname_np (
pthread_cond_t *cond,
const char *name,
void *mbz);
4 Arguments
cond
Address of the condition variable object whose object name is to
be changed.
name
Object name value to copy into the condition variable object.
mbz
Reserved for future use. The value must be zero (0).
4 Description
This routine changes the object name in the condition variable
object specified by the cond argument to the value specified
by the name argument. To set a new condition variable object's
object name, call this routine immediately after initializing the
condition variable object.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond is not a valid condition
variable object, or the length in characters of name
exceeds 31.
[ENOMEM] Insufficient memory exists to create a copy of the
object name string.
4 Associated_Routines
pthread_cond_getname_np()
3 pthread_cond_signal
Wakes at least one thread that is waiting on the specified
condition variable.
4 C_Binding
#include <pthread.h>
int
pthread_cond_signal (
pthread_cond_t *cond);
4 Arguments
cond
Condition variable to be signaled.
4 Description
This routine unblocks at least one thread waiting on the
specified condition variable cond. Calling this routine implies
that data guarded by the associated mutex has changed, thus it
might be possible for one of the waiting threads to proceed. In
general, only one thread will be released.
If no threads are waiting on the specified condition variable,
this routine takes no action. The signal does not propagate to
the next condition variable wait.
This routine should be called when any thread waiting on the
specified condition variable might find its predicate true,
but only one thread should proceed. If more than one thread can
proceed, or if any of the threads would not be able to proceed,
then you must use pthread_cond_broadcast().
The scheduling policy determines which thread is awakened. For
policies SCHED_FIFO and SCHED_RR, a blocked thread is chosen
in priority order, using first-in/first-out (FIFO) within
priorities.
If the calling thread holds the lock to the target condition
variable's associated mutex while setting the variable's wait
predicate, that thread can call pthread_cond_signal() to signal
the variable even after releasing the lock on that mutex.
However, for more predictable scheduling behavior, call pthread_
cond_signal() before releasing the target condition variable's
associated mutex.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond is not a valid condition
variable.
4 Associated_Routines
pthread_cond_broadcast()
pthread_cond_destroy()
pthread_cond_init()
pthread_cond_timedwait()
pthread_cond_wait()
3 pthread_cond_signal_int_np
Wakes one thread that is waiting on the specified condition
variable (called from interrupt level only).
4 C_Binding
#include <pthread.h>
int
pthread_cond_signal_int_np(
pthread_cond_t *cond);
4 Arguments
cond
Condition variable to be signaled.
4 Description
This routine wakes one thread waiting on the specified condition
variable. It can only be called from a software interrupt handler
routine (such as from a Tru64 UNIX signal handler or OpenVMS
AST). Calling this routine implies that it might be possible for
a single waiting thread to proceed.
The scheduling policies of the waiting threads determine which
thread is awakened. For policies SCHED_FIFO and SCHED_RR, a
blocked thread is chosen in priority order, using first-in/first-
out (FIFO) within priorities.
This routine does not cause a thread blocked on a condition
variable to resume execution immediately. A thread resumes
execution at some time after the interrupt handler routine
returns. If no threads are waiting on the condition variable
at the time of the call to pthread_cond_signal_int_np(), the next
future waiting thread will be automatically released (that is,
it will not actually wait). This routine establishes a "pending"
wake if necessary.
You can call this routine regardless of whether the associated
mutex is either locked or unlocked. (Never lock a mutex from an
interrupt handler routine.)
NOTE
This routine allows you to signal a condition variable from
a software interrupt handler. Do not call this routine from
noninterrupt code. To signal a condition variable from the
normal noninterrupt level, use pthread_cond_signal().
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond is not a valid condition
variable.
4 Associated_Routines
pthread_cond_broadcast()
pthread_cond_signal()
pthread_cond_sig_preempt_int_np()
pthread_cond_timedwait()
pthread_cond_wait()
3 pthread_cond_sig_preempt_int_np
Wakes one thread that is waiting on the specified condition
variable (called from interrupt level only).
4 C_Binding
void
pthread_cond_sig_preempt_int_np (
pthread_cond_t *cond);
4 Arguments
cond
Condition variable signaled.
4 Description
This routine wakes one thread waiting on a condition variable.
It can only be called from a software interrupt handler routine.
Calling this routine implies that it might be possible for a
single waiting thread to proceed. Call this routine when any
thread waiting on the specified condition variable might find its
predicate true.
The scheduling policies of the waiting threads determine which
thread is awakened. For policies SCHED_FIFO and SCHED_RR, a
blocked thread is chosen in priority order, using first-in/first-
out (FIFO) within priorities.
You can call this routine when the associated mutex is either
locked or unlocked. (Never try to lock a mutex from an interrupt
handler.)
This routine allows you to signal a thread from a software
interrupt handler. Do not call this routine from noninterrupt
code. If you want to signal a thread from the normal noninterrupt
level, use pthread_cond_signal.
NOTE
If a waiting thread has a preemptive scheduling policy and
a higher priority than the thread which was running when
the interrupt occurred, then the waiting thread will preempt
the interrupt routine and begin to run immediately. This
is unlike pthread_cond_signal_int_np() which causes the
condition variable to be signaled at a safe point after
the interrupt has completed. pthread_cond_sig_preempt_int_
np() avoids the possible latency which pthread_cond_signal_
int_np() may introduce; however, a side effect of this is
that during the call to pthread_cond_sig_preempt_int_np()
other threads may run if a preemption occurs. Thus, once an
interrupt routine calls pthread_cond_sig_preempt_int_np()
it can no longer rely on any assumptions of exclusivity
or atomicity which are typically provided by interrupt
routines. Furthermore, once the call to pthread_cond_sig_
preempt_int_np() is made, in addition to other threads
running, subsequent interrupts may be delivered at any time
as well (that is, they will not be blocked until the current
interrupt completes). For this reason, it is recommended
that pthread_cond_sig_preempt_int_np() be called as the last
statement in the interrupt routine.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond is not a valid condition
variable.
4 Associated_Routines
pthread_cond_broadcast()
pthread_cond_signal()
pthread_cond_signal_int_np()
pthread_cond_timedwait()
pthread_cond_wait()
3 pthread_cond_timedwait
Causes a thread to wait for the specified condition variable
to be signaled or broadcast, such that it will awake after a
specified period of time.
4 C_Binding
#include <pthread.h>
int
pthread_cond_timedwait (
pthread_cond_t *cond,
pthread_mutex_t *mutex,
const struct timespec *abstime);
4 Arguments
cond
Condition variable that the calling thread waits on.
mutex
Mutex associated with the condition variable specified in cond.
abstime
Absolute time at which the wait expires, if the condition has not
been signaled or broadcast. See the pthread_get_expiration_np()
routine, which is used to obtain a value for this argument.
The abstime argument is specified in Universal Coordinated Time
(UTC). In the UTC-based model, time is represented as seconds
since the Epoch. The Epoch is defined as the time 0 hours, 0
minutes, 0 seconds, January 1st, 1970 UTC.
4 Description
This routine causes a thread to wait until one of the following
occurs:
o The specified condition variable is signaled or broadcast.
o The current system clock time is greater than or equal to the
time specified by the abstime argument.
This routine is identical to pthread_cond_wait(), except that
this routine can return before a condition variable is signaled
or broadcast, specifically, when the specified time expires. For
more information, see the pthread_cond_wait() description.
This routine atomically releases the mutex and causes the calling
thread to wait on the condition. When the thread regains control
after calling pthread_cond_timedwait(), the mutex is locked and
the thread is the owner. This is true regardless of why the wait
ended. If general cancelability is enabled, the thread reacquires
the mutex (blocking for it if necessary) before the cleanup
handlers are run (or before the exception is raised).
If the current time equals or exceeds the expiration time, this
routine returns immediately, releasing and reacquiring the mutex.
It might cause the calling thread to yield (see the sched_yield()
description). Your code should check the return status whenever
this routine returns and take the appropriate action. Otherwise,
waiting on the condition variable can become a nonblocking loop.
Call this routine after you have locked the mutex specified
in mutex. The results of this routine are unpredictable if
this routine is called without first locking the mutex. The
only routines that are supported for use with asynchronous
cancelability enabled are those that disable asynchronous
cancelability.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond, mutex, or abstime is
invalid, or
Different mutexes are supplied for concurrent
pthread_cond_timedwait() operations or
pthread_cond_wait() operations on the same condition
variable, or
The mutex was not owned by the calling thread at the
time of the call.
[ETIMEDOUT] The time specified by abstime expired.
[ENOMEM] The Threads Library cannot acquire memory needed
to block using a statically initialized condition
variable.
4 Associated_Routines
pthread_cond_broadcast()
pthread_cond_destroy()
pthread_cond_init()
pthread_cond_signal()
pthread_cond_wait()
pthread_get_expiration_np()
3 pthread_cond_wait
Causes a thread to wait for the specified condition variable to
be signaled or broadcast.
4 C_Binding
#include <pthread.h>
int
pthread_cond_wait (
pthread_cond_t *cond,
pthread_mutex_t *mutex);
4 Arguments
cond
Condition variable that the calling thread waits on.
mutex
Mutex associated with the condition variable specified in cond.
4 Description
This routine causes a thread to wait for the specified condition
variable to be signaled or broadcast. Each condition corresponds
to one or more Boolean relations, called a predicate, based on
shared data. The calling thread waits for the data to reach a
particular state for the predicate to become true. However, the
return from this routine does not imply anything about the value
of the predicate and it should be reevaluated upon return.
Call this routine after you have locked the mutex specified in
mutex. The results of this routine are unpredictable if this
routine is called without first locking the mutex.
This routine atomically releases the mutex and causes the calling
thread to wait on the condition. When the thread regains control
after calling pthread_cond_wait(), the mutex is locked and the
thread is the owner. This is true regardless of why the wait
ended. If general cancelability is enabled, the thread reacquires
the mutex (blocking for it if necessary) before the cleanup
handlers are run (or before the exception is raised).
A thread that changes the state of storage protected by the
mutex in such a way that a predicate associated with a condition
variable might now be true, must call either pthread_cond_
signal() or pthread_cond_broadcast() for that condition
variable. If neither call is made, any thread waiting on the
condition variable continues to wait.
This routine might (with low probability) return when the
condition variable has not been signaled or broadcast. When
this occurs, the mutex is reacquired before the routine returns.
To handle this type of situation, enclose each call to this
routine in a loop that checks the predicate. The loop provides
documentation of your intent and protects against these spurious
wakeups, while also allowing correct behavior even if another
thread consumes the desired state before the awakened thread
runs.
It is illegal for threads to wait on the same condition variable
by specifying different mutexes.
The only routines that are supported for use with asynchronous
cancelability enabled are those that disable asynchronous
cancelability.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond or mutex is invalid, or
Different mutexes are supplied for concurrent
pthread_cond_wait() or pthread_cond_timedwait()
operations on the same condition variable, or
The mutex was not owned by the calling thread at the
time of the call.
[ENOMEM] The Threads Library cannot acquire memory needed
to block using a statically initialized condition
variable.
4 Associated_Routines
pthread_cond_broadcast()
pthread_cond_destroy()
pthread_cond_init()
pthread_cond_signal()
pthread_cond_timedwait()
3 pthread_create
Creates a thread.
4 C_Binding
#include <pthread.h>
int
pthread_create (
pthread_t *thread,
const pthread_attr_t *attr,
void * (*start_routine) (void *),
void *arg);
4 Arguments
thread
Location for thread object to be created.
attr
Thread attributes object that defines the characteristics of the
thread being created. If you specify NULL, default attributes are
used.
start_routine
Function executed as the new thread's start routine.
arg
Address value copied and passed to the thread's start routine.
4 Description
This routine creates a thread. A thread is a single, sequential
flow of control within a program. It is the active execution of a
designated routine, including any nested routine invocations.
Successful execution of this routine includes the following
actions:
o The Threads Library creates a thread object to describe
and control the thread. The thread object includes a thread
environment block (TEB) that programs can use, with care. (See
the <sys/types.h> header file on Tru64 UNIX, or the pthread.h
header file on other platforms.)
o The thread argument receives an identifier for the new thread.
o An executable thread is created with attributes specified
by the attr argument (or with default attributes if NULL is
specified).
Thread Creation
The Threads Library creates a thread in the ready state and
prepares the thread to begin executing its start routine,
the function passed to pthread_create() as the start_routine
argument. Depending on the presence of other threads and their
scheduling and priority attributes, the new thread might start
executing immediately. The new thread can also preempt its
creator, depending on the two threads' respective scheduling
and priority attributes. The caller of pthread_create() can
synchronize with the new thread using the pthread_join() routine
or using any mutually agreed upon mutexes, condition variables or
read-write locks.
For the duration of the new thread's existence, the Threads
Library maintains and manages the thread object and other thread
state overhead. A thread exists until it is both terminated and
detached. A thread is detached when created if the detachstate
attribute of its thread object is set to PTHREAD_CREATE_DETACHED.
It is also detached after any thread returns successfully from
calling pthread_detach() or pthread_join() for the thread.
Termination is explained in the next section (see Thread
Termination).
The Threads Library assigns each new thread a thread identifier,
which is written into the address specified as the pthread_
create() routine's thread argument. The new thread's thread
identifier is written before the new thread executes.
By default, the new thread's scheduling policy and priority
are inherited from the creating thread-that is, by default,
the pthread_create() routine ignores the scheduling policy and
priority set in the specified thread attributes object. Thus,
to create a thread that is subject to the scheduling policy and
priority set in the specified thread attributes object, before
calling pthread_create(), your program must use the pthread_attr_
setinheritsched() routine to set the inherit thread attributes
object's scheduling attribute to PTHREAD_EXPLICIT_SCHED.
On Tru64 UNIX, the signal state of the new thread is initialized
as follows:
1. The signal mask is inherited from the creating thread.
2. The set of signals pending for the new thread is empty.
If pthread_create() fails, no new thread is created, and the
contents of the location referenced by thread are undefined.
Thread Termination
A thread terminates when one of the following events occurs:
o The thread returns from its start routine.
o The thread calls the pthread_exit() routine.
o The thread is canceled.
When a thread terminates, the following actions are performed:
1. A return value (if one is available) is written into the
terminated thread's thread object, as follows:
o If the thread has been canceled, the value PTHREAD_CANCELED
is written into the thread's thread object.
o If the thread terminated by returning from its start
routine, the return value is copied from the start routine
(if one is available) into the thread's thread object.
Alternatively, if the thread explicitly called pthread_
exit(), the value received in the value_ptr argument (from
pthread_exit()) is stored in the thread's thread object.
Another thread can obtain this return value by joining with
the terminated thread (using pthread_join()).
NOTE
If the thread terminated by returning from its start
routine normally and the start routine does not provide a
return value, the results obtained by joining with that
thread are unpredictable.
2. If the termination results from a cancelation request or a
call to pthread_exit(), the Threads Library calls, in turn,
each cleanup handler that this thread declared (using pthread_
cleanup_push()) and that is not yet removed (using pthread_
cleanup_pop()). (The Threads Library also transfers control to
any appropriate CATCH, CATCH_ALL, or FINALLY blocks .)
The Threads Library calls the terminated thread's most
recently pushed cleanup handler first.
For C++ programmers: At normal exit from a thread, your
program will call the appropriate destructor functions, just
as if an exception had been raised.
3. To exit the terminated thread due to a call to pthread_exit(),
the Threads Library raises the pthread_exit_e exception. To
exit the terminated thread due to cancelation, the Threads
Library raises the pthread_cancel_e exception.
Your program can use the exception package to operate on the
generated exception. (In particular, note that the practice of
using CATCH handlers in place of pthread_cleanup_push() is not
portable.)
4. For each of the terminated thread's thread-specific data keys
that has a non-NULL value:
o The thread's value for the corresponding key is set to
NULL.
o Call each thread-specific data destructor function in this
multithreaded process' list of destructors.
Repeat this step until all thread-specific data values in the
thread are NULL, or for up to a number of iterations equal to
PTHREAD_DESTRUCTOR_ITERATIONS. This destroys all thread-
specific data associated with the terminated thread.
5. Awaken the thread (if there is one) that is currently waiting
to join with the terminated thread. That is, awaken the thread
that is waiting in a call to pthread_join().
6. If the thread is already detached, destroy its thread object.
Otherwise, the thread continues to exist until detached or
joined with.
4 Return_Values
If an error condition occurs, no thread is created, the contents
of thread are undefined, and this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EAGAIN] The system lacks the necessary resources to create
another thread, or the system-imposed limit on the
total number of threads under execution by a single
user is exceeded.
[EINVAL] The value specified by attr is not a valid attributes
block.
[ENOMEM] Insufficient memory exists to create a thread.
[EPERM] The caller does not have the appropriate permission
to create a thread with the specified attributes.
4 Associated_Routines
pthread_atfork()
pthread_attr_destroy()
pthread_attr_init()
pthread_attr_setdetachstate()
pthread_attr_setinheritsched()
pthread_attr_setschedparam()
pthread_attr_setschedpolicy()
pthread_attr_setstacksize()
pthread_cancel()
pthread_detach()
pthread_exit()
pthread_join()
3 pthread_delay_np
Delays a thread's execution.
4 C_Binding
#include <pthread.h>
int
pthread_delay_np (
const struct timespec *interval);
4 Arguments
interval
Number of seconds and nanoseconds to delay execution. The value
specified for each must be greater than or equal to zero.
4 Description
This routine causes a thread to delay execution for a specific
interval of time. This interval ends at the current time plus the
specified interval. The routine will not return before the end
of the interval is reached, but may return an arbitrary amount of
time after the end of the interval is reached. This can be due to
system load, thread priorities, and system timer granularity.
Specifying an interval of zero (0) seconds and zero (0)
nanoseconds is allowed and can be used to force the thread either
to give up the processor or to deliver a pending cancelation
request.
The timespec structure contains the following two fields:
o tv_sec is an integral number of seconds.
o tv_nsec is an integral number of nanoseconds.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by interval is invalid.
3 pthread_detach
Marks a thread object for deletion.
4 C_Binding
#include <pthread.h>
int
pthread_detach (
pthread_t thread);
4 Arguments
thread
Thread object being marked for deletion.
4 Description
This routine marks the specified thread object to indicate that
storage for the corresponding thread can be reclaimed when
the thread terminates. This includes storage for the thread
argument's return value, as well as the thread object. If thread
has not terminated when this routine is called, this routine does
not cause it to terminate.
When a thread object is no longer referenced, call this routine.
The results of this routine are unpredictable if the value of
thread refers to a thread object that does not exist.
You can create a thread already detached by setting its thread
object's detachstate attribute.
The pthread_join() routine also detaches the target thread after
pthread_join() returns successfully.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by thread does not refer to a
joinable thread.
[ESRCH] The value specified by thread cannot be found.
4 Associated_Routines
pthread_cancel()
pthread_create()
pthread_exit()
pthread_join()
3 pthread_equal
Compares one thread identifier to another thread identifier.
4 C_Binding
#include <pthread.h>
int
pthread_equal (
pthread_t t1,
pthread_t t2);
4 Arguments
t1
The first thread identifier to be compared.
t2
The second thread identifier to be compared.
4 Description
This routine compares one thread identifier to another thread
identifier.
If either t1 or t2 are not valid thread identifiers, this
routine's behavior is undefined.
4 Return_Values
Possible return values are as follows:
Return Description
0 Values of t1 and t2 do not designate the same object.
Non-zero Values of t1 and t2 designate the same object.
3 pthread_exc_get_status_np
(Macro) Obtains a system-defined error status from a status
exception object.
4 C_Binding
#include <pthread_exception.h>
int
pthread_exc_get_status_np (
EXCEPTION *exception,
unsigned long *code);
4 Arguments
exception
Threads Library status exception object whose status code is
obtained.
code
Receives the system-specific status code associated with the
specified status exception object.
4 Description
This routine obtains and returns the system-specific status
value from the status exception object specified in the exception
argument. This value must have already been associated with the
exception object using the pthread_exc_set_status_np() routine.
In a program that uses Threads Library status exceptions, use
this routine within a CATCH or CATCH_ALL code block to obtain the
status code value associated with a caught exception. Note that
any exception objects set to the same status value are considered
equivalent by the Threads Library.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. If the routine's exception
object argument is a status exception, it sets the code argument
and returns zero (0). Possible return values are as follows:
Return Description
0 Successful completion.
[EINVAL] The exception argument is not a valid status
exception object.
4 Associated_Routines
pthread_exc_set_status_np()
3 pthread_exc_matches_np
(Macro) Determines whether two Threads Library exception objects
are identical.
4 C_Binding
#include <pthread_exception.h>
int
pthread_exc_matches_np (
EXCEPTION *exception1,
EXCEPTION *exception2);
4 Arguments
exception1
Threads Library exception object.
exception2
Threads Library exception object.
4 Description
This routine compares two exception objects, taking into
consideration whether each is an address exception or status
exception.
This routine returns either the C language value TRUE or the
C language value FALSE, indicating whether the two exception
objects specified in the arguments exception1 and exception2 are
identical.
4 Return_Values
The C language value TRUE if the exception objects are identical,
or the C language value FALSE if not.
4 Associated_Routines
pthread_exc_get_status_np()
pthread_exc_report_np()
pthread_exc_set_status_np()
3 pthread_exc_report_np
Produces a message that reports what a specified Threads Library
status exception object represents.
4 C_Binding
#include <pthread_exception.h>
void
pthread_exc_report_np (
EXCEPTION *exception);
4 Arguments
exception
Threads Library exception object that has been set with a status
value.
4 Description
This routine produces a text message on the stderr device
(Tru64 UNIX systems) or SYS$ERROR device (OpenVMS systems) that
describes the exception whose exception object is specified in
the exception argument.
In a program that uses status exceptions, use this routine within
a CATCH or CATCH_ALL code block to produce the message associated
with a caught exception. Note that any exception objects set to
the same status value are considered equivalent by the Threads
Library.
4 Return_Values
None
4 Associated_Routines
pthread_exc_get_status_np()
pthread_exc_set_status_np()
3 pthread_exc_set_status_np
(Macro) Imports a system-defined error status into a Threads
Library address exception object.
4 C_Binding
#include <pthread_exception.h>
void
pthread_exc_set_status_np (
EXCEPTION *exception,
unsigned long code);
4 Arguments
exception
Threads Library address exception object into which the specified
status code is imported.
code
System-specific status code to be imported.
4 Description
This routine associates a system-specific status value with the
specified address exception object. This transforms the address
exception object into a status exception object.
The exception argument must already have been initialized with
the exception package's EXCEPTION_INIT macro.
Use this routine to associate any system-specific status value
with the specified address exception object. Note that any
exception objects set to the same status value are considered
equivalent by the Threads Library.
4 Return_Values
None
4 Associated_Routines
pthread_exc_get_status_np()
3 pthread_exit
Terminates the calling thread.
4 C_Binding
#include <pthread.h>
void
pthread_exit (
void *value_ptr);
4 Arguments
value_ptr
Value copied and returned to the caller of pthread_join(). Note
that void * is used as a universal datatype, not as a pointer.
The Threads Library treats the value_ptr as a value and stores it
to be returned by pthread_join().
4 Description
This routine terminates the calling thread and makes a status
value (value_ptr) available to any thread that calls pthread_
join() and specifies the terminating thread.
Any cleanup handlers that have been pushed and not yet popped
from the stack are popped in the reverse order that they were
pushed and then executed. After all cleanup handlers have been
executed, appropriate destructor functions are called in an
unspecified order if the thread has any thread-specific data.
Thread termination does not release any application-visible
process resources, including, but not limited to mutexes and
file descriptors, nor does it perform any process-level cleanup
actions, including, but not limited to calling any atexit()
routine that may exist.
The Threads Library issues an implicit call to pthread_exit()
when a thread returns from the start routine that was used to
create it. The Threads Library writes the function's return value
as the return value in the thread's thread object. The process
exits when the last running thread calls pthread_exit().
After a thread has terminated, the result of access to local
(that is, explicitly or implicitly declared auto) variables
of the thread is undefined. So, do not use references to local
variables of the existing thread for the value_ptr argument of
the pthread_exit() routine.
4 Return_Values
None
4 Associated_Routines
pthread_cancel()
pthread_create()
pthread_detach()
pthread_join()
3 pthread_getconcurrency
Obtains the value of the concurrency level global variable for
this process.
4 C_Binding
#include <pthread.h>
int
pthread_getconcurrency (
void);
4 Description
This routine obtains and returns the value of the "concurrency
level" global setting for the calling thread's process. Because
the Threads Library automatically manages the concurrency of all
threads in a multithreaded process, it ignores this concurrency
level value.
The concurrency level value has no effect on the behavior of a
multithreaded program that uses the Threads Library. This routine
is provided for Single UNIX Specification, Version 2, source code
compatibility and has no other effect when called.
The initial concurrency level is zero (0), indicating that the
Threads Library controls the concurrency level.
The concurrency level can be set using the pthread_
setconcurrency() routine.
4 Return_Values
This routine always returns the value of this process'
concurrency level global variable. If this process has never
called the pthread_setconcurrency() routine, this routine returns
zero (0).
4 Associated_Routines
pthread_setconcurrency()
3 pthread_getname_np
Obtains the object name from the thread object for an existing
thread.
4 C_Binding
#include <pthread.h>
int
pthread_getname_np (
pthread_thread_t thread,
char *name,
size_t len);
4 Arguments
thread
Thread object whose object name is to be obtained.
name
Location to store the obtained object name.
len
Length in bytes of buffer at the location specified by name.
4 Description
This routine copies the object name from the thread object
specified by the thread argument to the buffer at the location
specified by the name argument. Before calling this routine, your
program must allocate the buffer indicated by name.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
If the specified thread object has not been previously set with
an object name, this routine copies a C language null string into
the buffer at location name.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[ESRCH] The thread specified by thread does not exist.
4 Associated_Routines
pthread_setname_np()
3 pthread_getschedparam
Obtains the current scheduling policy and scheduling parameters
of a thread.
4 C_Binding
#include <pthread.h>
int
pthread_getschedparam (
pthread_t thread,
int *policy,
struct sched_param *param);
4 Arguments
thread
Thread whose scheduling policy and parameters are obtained.
policy
Receives the value of the scheduling policy for the thread
specified in thread. Refer to the description of the pthread_
setschedparam() routine for valid policies and their meanings.
param
Receives the value of the scheduling parameters for the thread
specified in thread. Refer to the description of the pthread_
setschedparam() routine for valid values.
4 Description
This routine obtains both the current scheduling policy and
associated scheduling parameters of the thread specified by the
thread argument.
The priority value returned in the param structure is the value
specified either in the attr argument passed to pthread_create()
or by the most recent call to pthread_setschedparam() that
affects the target thread.
This routine differs from pthread_attr_getschedpolicy() and
pthread_attr_getschedparam(), in that those routines get the
scheduling policy and parameter attributes that are used to
establish the priority and scheduling policy of a new thread
when it is created. This routine, however, obtains the scheduling
policy and parameters of an existing thread.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[ESRCH] The value specified by thread does not refer to an
existing thread.
4 Associated_Routines
pthread_attr_getschedparam()
pthread_attr_getschedpolicy()
pthread_create()
pthread_self()
pthread_setschedparam()
3 pthread_getsequence_np
Obtains the unique identifier for the specified thread.
4 C_Binding
#include <pthread.h>
unsigned long
pthread_getsequence_np (
pthread_t thread);
4 Arguments
thread
Thread whose sequence number is to be obtained.
4 Description
This routine obtains and returns the thread sequence number
for the thread identified by the thread object specified in the
thread argument.
The thread sequence number provides a unique identifier for each
existing thread. A thread's thread sequence number is never
reused while the thread exists, but can be reused after the
thread terminates. The debugger interfaces use this sequence
number to identify each thread in commands and in display output.
The result of calling this routine is undefined if the thread
argument does not specify a valid thread object.
4 Return_Values
No errors are returned. This routine returns the thread sequence
number for the thread identified by the thread object specified
in the thread argument. The result of calling this routine is
undefined if the thread argument does not specify a valid thread.
4 Associated_Routines
pthread_create()
pthread_self()
3 pthread_getspecific
Obtains the thread-specific data associated with the specified
key.
4 C_Binding
#include <pthread.h>
void
*pthread_getspecific (
pthread_key_t key);
4 Arguments
key
The context key identifies the thread-specific data to be
obtained.
4 Description
This routine obtains the thread-specific data associated with the
specified key for the current thread. Obtain this key by calling
the pthread_key_create() routine. This routine returns the value
currently bound to the specified key on behalf of the calling
thread.
This routine may be called from a thread-specific data destructor
function.
4 Return_Values
No errors are returned. This routine returns the thread-specific
data value associated with the specified key argument. If no
thread-specific data value is associated with key, or if key is
not defined, then this routine returns a NULL value.
4 Associated_Routines
pthread_key_create()
pthread_setspecific()
3 pthread_get_expiration_np
Obtains a value representing a desired expiration time.
4 C_Binding
#include <pthread.h>
int
pthread_get_expiration_np (
const struct timespec *delta,
struct timespec *abstime);
4 Arguments
delta
Number of seconds and nanoseconds to add to the current system
time. (The result is the time in the future.) This result will be
placed in abstime.
abstime
Value representing the absolute expiration time. The absolute
expiration time is obtained by adding delta to the current system
time. The resulting abstime is in Universal Coordinated Time
(UTC).
4 Description
This routine adds a specified interval to the current absolute
system time and returns a new absolute time. This new absolute
time may then be used as the expiration time in a call to
pthread_cond_timedwait().
The timespec structure contains the following two fields:
o tv_sec is an integral number of seconds.
o tv_nsec is an integral number of nanoseconds.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by delta is invalid.
4 Associated_Routines
pthread_cond_timedwait()
3 pthread_join
PTHREAD_JOIN32(), PTHREAD_JOIN64()
The pthread_join32() and pthread_join64() forms are only
valid in 64-bit pointer environments for OpenVMS Alpha.
Ensure that your compiler provides 64-bit support before you
use pthread_join64().
Causes the calling thread to wait for the termination of a
specified thread.
4 C_Binding
#include <pthread.h>
int
pthread_join (
pthread_t thread,
void **value_ptr);
4 Arguments
thread
Thread whose termination is awaited by the calling routine.
value_ptr
Return value of the terminating thread (when that thread either
calls pthread_exit() or returns from its start routine).
4 Description
This routine suspends execution of the calling thread until the
specified target thread thread terminates.
On return from a successful pthread_join() call with a non-
NULL value_ptr argument, the value passed to pthread_exit()
is returned in the location referenced by value_ptr, and the
terminating thread is detached.
If more than one thread attempts to join with the same thread,
the results are unpredictable.
A call to pthread_join() returns after the target thread
terminates. The pthread_join() routine is a deferred cancelation
point; the target thread will not be detached if the thread
blocked in pthread_join() is canceled.
If a thread calls this routine and specifies its own pthread_t, a
deadlock can result.
The pthread_join() (or pthread_detach()) routine should
eventually be called for every thread that is created with the
detachstate attribute of its thread object set to PTHREAD_CREATE_
JOINABLE, so that storage associated with the thread can be
reclaimed.
NOTE
For OpenVMS Alpha systems:
The pthread_join() routine is defined to pthread_join64()
if you compile using /pointer_size=long. If you do not
specify /pointer_size, or if you specify /pointer_
size=short, then pthread_join() is defined to be pthread_
join32(). You can call pthread_join32() or pthread_join64()
instead of pthread_join(). The pthread_join32() form
returns a 32-bit void * value in the address to which
value_ptr points. The pthread_join64() form returns a 64-
bit void * value. You can call either, or you can call
pthread_join(). Note that if you call pthread_join32() and
the thread with which you join returns a 64-bit value, the
high 32 bits of which are not 0 (zero), the Threads Library
discards those high bits with no warning.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by thread does not refer to a
joinable thread.
[ESRCH] The value specified by thread does not refer to an
existing thread ID.
[EDEADLK] A deadlock was detected, or thread specifies the
calling thread.
4 Associated_Routines
pthread_cancel()
pthread_create()
pthread_detach()
pthread_exit()
3 pthread_key_create
Generates a unique thread-specific data key.
4 C_Binding
#include <pthread.h>
int
pthread_key_create (
pthread_key_t *key,
void (*destructor)(void *));
4 Arguments
key
Location where the new thread-specific data key will be stored.
destructor
Procedure called to destroy a thread-specific data value
associated with the created key when the thread terminates.
Note that the argument to the destructor for the user-specified
routine is the non-NULL value associated with a key.
4 Description
This routine generates a unique, thread-specific data key that
is visible to all threads in the process. The variable key
provided by this routine is an opaque object used to locate
thread-specific data. Although the same key value can be used
by different threads, the values bound to the key by pthread_
setspecific() are maintained on a per-thread basis and persist
for the life of the calling thread. The initial value of the key
in all threads is NULL.
The Threads Library imposes a maximum number of thread-specific
data keys, equal to the symbolic constant PTHREAD_KEYS_MAX.
Thread-specific data allows client software to associate "static"
information with the current thread. For example, where a routine
declares a variable static in a single-threaded program, a
multithreaded version of the program might create a thread-
specific data key to store the same variable.
This routine generates and returns a new key value. The key
reserves a cell within each thread. Each call to this routine
creates a new cell that is unique within an application
invocation. Keys must be generated from initialization code that
is guaranteed to be called only once within each process. (See
the pthread_once() description for more information.)
When a thread terminates, its thread-specific data is
automatically destroyed; however, the key remains unless
destroyed by a call to pthread_key_delete(). An optional
destructor function can be associated with each key. At thread
exit, if a key has a non-NULL destructor pointer, and the thread
has a non-NULL value associated with that key, the destructor
function is called with the current associated value as its sole
argument. The order in which thread-specific data destructors are
called at thread termination is undefined.
Before each destructor is called, the thread's value for the
corresponding key is set to NULL. After the destructors have been
called for all non-NULL values with associated destructors, if
there are still some non-NULL values with associated destructors,
then this sequence of actions is repeated. If there are still
non-NULL values for any key with a destructor after four
repetitions of this sequence, the thread is terminated. At this
point, any key values that represent allocated heap will be lost.
Note that this occurs only when a destructor performs some action
that creates a new value for some key. Your program's destructor
code should attempt to avoid this sort of circularity.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EAGAIN] The system lacked the necessary resources to create
another thread-specific data key, or the limit on the
total number of keys per process (PTHREAD_KEYS_MAX)
has been exceeded.
[ENOMEM] Insufficient memory exists to create the key.
4 Associated_Routines
pthread_getspecific()
pthread_key_delete()
pthread_once()
pthread_setspecific()
3 pthread_key_delete
Deletes a thread-specific data key.
4 C_Binding
#include <pthread.h>
int
pthread_key_delete (
pthread_key_t key);
4 Arguments
key
Context key to be deleted.
4 Description
This routine deletes the thread-specific data key specified by
the key argument, which must have been previously returned by
pthread_key_create().
The thread-specific data values associated with key need not be
NULL at the time this routine is called. The application must
free any application storage or perform any cleanup actions for
data structures related to the deleted key or associated thread-
specific data in any threads. This cleanup can be done either
before or after this routine is called.
Attempting to use the key after calling this routine results in
unpredictable behavior.
No destructor functions are invoked by this routine. Any
destructor functions that may have been associated with key shall
no longer be called upon thread exit. pthread_key_delete() can be
called from within destructor functions.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The key value is not a valid key.
4 Associated_Routines
pthread_exit()
pthread_getspecific()
pthread_key_create()
3 pthread_key_getname_np
Obtains the object name from a thread-specific data key object.
4 C_Binding
#include <pthread.h>
int
pthread_key_getname_np (
pthread_key_t *key,
char *name,
size_t len);
4 Arguments
key
Address of the thread-specific data key object whose object name
is to be obtained.
name
Location to store the obtained object name.
len
Length in bytes of buffer at the location specified by name.
4 Description
This routine copies the object name from the thread-specific
data key object specified by the key argument to the buffer at
the location specified by the name argument. Before calling this
routine, your program must allocate the buffer indicated by name.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
If the specified thread-specific data key object has not been
previously set with an object name, this routine copies a C
language null string into the buffer at location name.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by key is not a valid key.
4 Associated_Routines
pthread_key_setname_np()
3 pthread_key_setname_np
Changes the object name in a thread-specific data key object.
4 C_Binding
#include <pthread.h>
int
pthread_key_setname_np (
pthread_key_t *cond,
const char *name,
void *mbz);
4 Arguments
key
Address of the thread-specific data key object whose object name
is to be changed.
name
Object name value to copy into the key object.
mbz
Reserved for future use. The value must be zero (0).
4 Description
This routine changes the object name in the thread-specific
data key object specified by the key argument to the value
specified by the name argument. To set a new thread-specific data
key object's object name, call this routine immediately after
initializing the key object.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by key is not a valid key, or the
length in characters of name exceeds 31.
[ENOMEM] Insufficient memory exists to create a copy of the
object name string.
4 Associated_Routines
pthread_key_getname_np()
3 pthread_lock_global_np
Locks the Threads Library global mutex.
4 C_Binding
#include <pthread.h>
int
pthread_lock_global_np (void);
4 Arguments
None
4 Description
This routine locks the Threads Library global mutex. If the
global mutex is currently held by another thread when a thread
calls this routine, the calling thread waits for the global mutex
to become available and then locks it.
The thread that has locked the global mutex becomes its current
owner and remains the owner until the same thread has unlocked
it. This routine returns with the global mutex in the locked
state and with the current thread as the global mutex's current
owner.
Use the global mutex when calling a library package that is
not designed to run in a multithreaded environment. Unless the
documentation for a library function specifically states that it
is thread-safe, assume that it is not compatible; in other words,
assume it is nonreentrant.
The global mutex is one lock. Any code that calls any function
that is not known to be reentrant should use the same lock.
This prevents problems resulting from dependencies among threads
that call library functions and those functions' calling other
functions, and so on.
The global mutex is a recursive mutex. A thread that has locked
the global mutex can relock it without deadlocking. The locking
thread must call pthread_unlock_global_np() as many times as it
called this routine, to allow another thread to lock the global
mutex.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
4 Associated_Routines
pthread_unlock_global_np()
3 pthread_mutexattr_destroy
Destroys the specified mutex attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_mutexattr_destroy (
pthread_mutexattr_t *attr);
4 Arguments
attr
Mutex attributes object to be destroyed.
4 Description
This routine destroys a mutex attributes object-that is, the
object becomes uninitialized. Call this routine when your program
no longer needs the specified mutex attributes object.
After this routine is called, the Threads Library may reclaim
the storage used by the mutex attributes object. Mutexes that
were created using this attributes object are not affected by the
destruction of the mutex attributes object.
The results of calling this routine are unpredictable, if the
attributes object specified in the attr argument does not exist.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid attributes
object.
4 Associated_Routines
pthread_mutexattr_init()
3 pthread_mutexattr_gettype
Obtains the mutex type attribute in the specified mutex attribute
object.
4 C_Binding
#include <pthread.h>
int
pthread_mutexattr_gettype (
const pthread_mutexattr_t *attr,
int *type);
4 Arguments
attr
Mutex attributes object whose mutex type attribute is obtained.
type
Receives the value of the mutex type attribute. The type argument
specifies the type of mutex that can be created. Valid values
are:
PTHREAD_MUTEX_NORMAL
PTHREAD_MUTEX_DEFAULT (default)
PTHREAD_MUTEX_RECURSIVE
PTHREAD_MUTEX_ERRORCHECK
4 Description
This routine obtains the value of the mutex type attribute in
the mutex attributes object specified by the attr argument and
stores it in the location specified by the type argument. See the
pthread_mutexattr_settype() description for information about
mutex types.
4 Return_Values
On successful completion, this routine returns the mutex type in
the location specified by the type argument.
If an error condition occurs, this routine returns an integer
value indicating the type of the error. Possible return values
are as follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid mutex
attributes object.
4 Associated_Routines
pthread_mutexattr_init()
pthread_mutexattr_settype()
pthread_mutex_init()
3 pthread_mutexattr_init
Initializes a mutex attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_mutexattr_init (
pthread_mutexattr_t *attr);
4 Arguments
attr
Address of the mutex attributes object to be initialized.
4 Description
This routine initializes the mutex attributes object specified
by the attr argument with a set of default values. A mutex
attributes object is used to specify the attributes of one or
more mutexes when they are created. The attributes object created
by this routine is used only in calls to the pthread_mutex_init()
routine.
When a mutex attributes object is used to create a mutex, the
values of the individual attributes determine the characteristics
of the new mutex. Thus, attributes objects act as additional
arguments to mutex creation. Changing individual attributes
in an attributes object does not affect any mutexes that were
previously created using that attributes object.
You can use the same mutex attributes object in successive calls
to pthread_mutex_init(), from any thread. If multiple threads
can change attributes in a shared mutex attributes object,
your program must use a mutex to protect the integrity of the
attributes object's contents.
Results are undefined if this routine is called and the attr
argument specifies a mutex attributes object that is already
initialized.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[ENOMEM] Insufficient memory to create the mutex attributes
object.
4 Associated_Routines
pthread_mutexattr_destroy()
pthread_mutexattr_gettype()
pthread_mutexattr_settype()
pthread_mutex_init()
3 pthread_mutexattr_settype
Specifies the mutex type attribute that is used when a mutex is
created.
4 C_Binding
#include <pthread.h>
int
pthread_mutexattr_settype (
pthread_mutexattr_t *attr,
int type);
4 Arguments
attr
Mutex attributes object whose mutex type attribute is to be
modified.
type
New value for the mutex type attribute. The type argument
specifies the type of mutex that will be created. Valid values
are:
PTHREAD_MUTEX_NORMAL
PTHREAD_MUTEX_DEFAULT (default)
PTHREAD_MUTEX_RECURSIVE
PTHREAD_MUTEX_ERRORCHECK
4 Description
This routine sets the mutex type attribute that is used to
determine which type of mutex is created based on a subsequent
call to pthread_mutex_init().
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr or type is not a valid
mutex attributes type.
[ESRCH] The value specified by attr does not refer to an
existing mutex attributes object.
4 Associated_Routines
pthread_mutexattr_init()
pthread_mutexattr_gettype()
pthread_mutex_init()
3 pthread_mutex_destroy
Destroys a mutex.
4 C_Binding
#include <pthread.h>
int
pthread_mutex_destroy (
pthread_mutex_t *mutex);
4 Arguments
mutex
The mutex to be destroyed.
4 Description
This routine destroys the specified mutex by uninitializing it,
and should be called when a mutex object is no longer referenced.
After this routine is called, the Threads Library may reclaim
internal storage used by the specified mutex.
It is safe to destroy an initialized mutex that is unlocked.
However, it is illegal to destroy a locked mutex.
The results of this routine are unpredictable if the mutex object
specified in the mutex argument does not currently exist, or is
not initialized.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EBUSY] An attempt was made to destroy the object referenced
by mutex while it is locked.
[EINVAL] The value specified by mutex is not a valid mutex.
4 Associated_Routines
pthread_mutex_init()
pthread_mutex_lock()
pthread_mutex_trylock()
pthread_mutex_unlock()
3 pthread_mutex_getname_np
Obtains the object name from a mutex object.
4 C_Binding
#include <pthread.h>
int
pthread_mutex_getname_np (
pthread_mutex_t *mutex,
char *name,
size_t len);
4 Arguments
mutex
Address of the mutex object whose object name is to be obtained.
name
Location to store the obtained object name.
len
Length in bytes of buffer at the location specified by name.
4 Description
This routine copies the object name from the mutex object
specified by the mutex argument to the buffer at the location
specified by the name argument. Before calling this routine, your
program must allocate the buffer indicated by name.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
If the specified condition variable object has not been
previously set with an object name, this routine copies a C
language null string into the buffer at location name.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by mutex is not a valid mutex.
4 Associated_Routines
pthread_mutex_setname_np()
3 pthread_mutex_init
Initializes a mutex.
4 C_Binding
#include <pthread.h>
int
pthread_mutex_init (
pthread_mutex_t *mutex,
const pthread_mutexattr_t *attr);
4 Arguments
mutex
Mutex to be initialized.
attr
Mutex attributes object that defines the characteristics of the
mutex to be initialized.
4 Description
This routine initializes a mutex with the attributes specified
by the mutex attributes object specified in the attr argument. A
mutex is a synchronization object that allows multiple threads to
serialize their access to shared data.
The mutex is initialized and set to the unlocked state. If attr
is set to NULL, the default mutex attributes are used. The
pthread_mutexattr_settype() routine can be used to specify the
type of mutex that is created (normal, recursive, or errorcheck).
Use the PTHREAD_MUTEX_INITIALIZER macro to statically initialize
a mutex without calling this routine. Statically initialized
mutexes need not be destroyed using pthread_mutex_destroy(). Use
this macro as follows:
pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER
Only normal mutexes can be statically initialized.
A mutex is a resource of the process, not part of any particular
thread. A mutex is neither destroyed nor unlocked automatically
when any thread exits. If a mutex is allocated on a stack, static
initializers cannot be used on the mutex.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error, the mutex is not initialized,
and the contents of mutex are undefined. Possible return values
are as follows:
Return Description
0 Successful completion.
[EAGAIN] The system lacks the necessary resources to
initialize the mutex.
[EBUSY] The implementation has detected an attempt to
reinitialize the mutex (a previously initialized,
but not yet destroyed mutex).
[EINVAL] The value specified by mutex is not a valid mutex.
[ENOMEM] Insufficient memory exists to initialize the mutex.
[EPERM] The caller does not have privileges to perform this
operation.
4 Associated_Routines
pthread_mutexattr_init()
pthread_mutexattr_gettype()
pthread_mutexattr_settype()
pthread_mutex_lock()
pthread_mutex_trylock()
pthread_mutex_unlock()
3 pthread_mutex_lock
Locks an unlocked mutex.
4 C_Binding
#include <pthread.h>
int
pthread_mutex_lock (
pthread_mutex_t *mutex);
4 Arguments
mutex
Mutex to be locked.
4 Description
This routine locks a mutex with behavior that depends upon the
type of mutex, as follows:
o If a normal or default mutex is specified, a deadlock can
result if the current owner of the mutex calls this routine in
an attempt to lock the mutex a second time. (The deadlock is
not detected or reported.)
o If a recursive mutex is specified, the current owner of the
mutex can relock the same mutex without blocking. The lock
count is incremented for each recursive lock within the
thread.
o If an errorcheck mutex is specified and the current owner
tries to lock the mutex a second time, this routine reports
the [EDEADLK] error. If the mutex is locked by another thread,
the calling thread waits for the mutex to become available.
Use the pthread_mutexattr_settype() routine to set the type of
the mutex to normal, default, recursive, or errorcheck.
The thread that has locked a mutex becomes its current owner and
remains its owner until the same thread has unlocked it. This
routine returns with the mutex in the locked state and with the
calling thread as the mutex's current owner.
A recursive or errorcheck mutex records the identity of the
thread that locks it, allowing debuggers to display this
information. In most cases, normal and default mutexes do not
record the owning thread's identity.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EDEADLK] A deadlock condition is detected.
[EINVAL] The value specified by mutex is not a valid mutex.
4 Associated_Routines
pthread_mutexattr_settype()
pthread_mutex_destroy()
pthread_mutex_init()
pthread_mutex_trylock()
pthread_mutex_unlock()
3 pthread_mutex_setname_np
Changes the object name in a mutex object.
4 C_Binding
#include <pthread.h>
int
pthread_mutex_setname_np (
pthread_mutex_t *mutex,
const char *name,
void *mbz);
4 Arguments
mutex
Address of the mutex object whose object name is to be changed.
name
Object name value to copy into the mutex object.
mbz
Reserved for future use. The value must be zero (0).
4 Description
This routine changes the object name in the mutex object
specified by the mutex argument to the value specified by the
name argument. To set a new mutex object's object name, call this
routine immediately after initializing the mutex object.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by mutex is not a valid mutex, or
the length in characters of name exceeds 31.
[ENOMEM] Insufficient memory to create a copy of the object
name string.
4 Associated_Routines
pthread_mutex_getname_np()
3 pthread_mutex_trylock
Attempts to lock the specified mutex. If the mutex is already
locked, the calling thread does not wait for the mutex to become
available.
4 C_Binding
#include <pthread.h>
int
pthread_mutex_trylock (
pthread_mutex_t *mutex);
4 Arguments
mutex
Mutex to be locked.
4 Description
This routine attempts to lock the mutex specified in the mutex
argument. When a thread calls this routine, an attempt is made to
immediately lock the mutex. If the mutex is successfully locked,
this routine returns zero (0) and the calling thread becomes the
mutex's current owner. If the specified mutex is locked when a
thread calls this routine, the calling thread does not wait for
the mutex to become available.
The behavior of this routine is as follows:
o For a normal, default, or errorcheck mutex: if the mutex
is locked by any thread (including the calling thread) when
this routine is called, this routine returns [EBUSY] and the
calling thread does not wait to acquire the lock.
o For a normal or errorcheck mutex: if the mutex is not owned,
this routine returns zero (0) and the mutex becomes locked by
the calling thread.
o For a recursive mutex: if the mutex is owned by the current
thread, this routine returns zero (0) and the mutex lock count
is incremented. (To unlock a recursive mutex, each call to
pthread_mutex_trylock() must be matched by a call to pthread_
mutex_unlock().)
Use the pthread_mutexattr_settype() routine to set the mutex type
attribute (normal, default, recursive, or errorcheck).
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EBUSY] The mutex is already locked; therefore, it was not
acquired.
[EINVAL] The value specified by mutex is not a valid mutex.
4 Associated_Routines
pthread_mutexattr_settype()
pthread_mutex_destroy()
pthread_mutex_init()
pthread_mutex_lock()
pthread_mutex_unlock()
3 pthread_mutex_unlock
Unlocks the specified mutex.
4 C_Binding
#include <pthread.h>
int
pthread_mutex_unlock (
pthread_mutex_t *mutex);
4 Arguments
mutex
Mutex to be unlocked.
4 Description
This routine unlocks the mutex specified by the mutex argument.
This routine behaves as follows, based on the type of the
specified mutex:
o For a normal, default, or errorcheck mutex: if the mutex is
owned by the calling thread, it is unlocked with no current
owner. Further, for a normal or default mutex: if the mutex
is not locked or is locked by another thread, this routine
can also return [EPERM], but this is not guaranteed. For an
errorcheck mutex: if the mutex is not locked or is locked by
another thread, this routine returns [EPERM].
o For a recursive mutex: if the mutex is owned by the calling
thread, the lock count is decremented. The mutex remains
locked and owned until the lock count reaches zero (0). When
the lock count reaches zero, the mutex becomes unlocked with
no current owner.
If one or more threads are waiting to lock the specified mutex,
and the mutex becomes unlocked, this routine causes one thread
to unblock and to try to acquire the mutex. The scheduling policy
is used to determine which thread to unblock. For the SCHED_FIFO
and SCHED_RR policies, a blocked thread is chosen in priority
order, using first-in/first-out within priorities. Note that the
mutex might not be acquired by the awakened thread, if any other
running thread attempts to lock the mutex first.
On Tru64 UNIX, if a signal is delivered to a thread waiting for
a mutex, upon return from the signal handler, the thread resumes
waiting for the mutex as if it was not interrupted.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified for mutex is not a valid mutex.
[EPERM] The calling thread does not own the mutex.
4 Associated_Routines
pthread_mutexattr_settype()
pthread_mutex_destroy()
pthread_mutex_init()
pthread_mutex_lock()
pthread_mutex_trylock()
3 pthread_once
Calls a routine that is executed by a single thread, once.
4 C_Binding
#include <pthread.h>
int
pthread_once (
pthread_once_t *once_control,
void (*routine) (void));
4 Arguments
once_control
Address of a record that controls the one-time execution code.
Each one-time execution routine must have its own unique pthread_
once_t record.
routine
Address of a procedure to be executed once. This routine is
called only once, regardless of the number of times it and its
associated once_control block are passed to pthread_once().
4 Description
The first call to this routine by any thread in a process with
a given once_control will call the specified routine with no
arguments. Subsequent calls to pthread_once() with the same once_
control will not call the routine. On return from pthread_once(),
it is guaranteed that the routine has completed.
For example, a mutex or a per-thread context key must be
created exactly once. Calling pthread_once() ensures that the
initialization is serialized across multiple threads. Other
threads that reach the same point in the code would be delayed
until the first thread is finished.
NOTE
If you specify a routine that directly or indirectly results
in a recursive call to pthread_once() and that specifies the
same routine argument, the recursive call can result in a
deadlock.
To initialize the once_control record, your program can zero out
the entire structure, or you can use the PTHREAD_ONCE_INIT macro,
which is defined in the pthread.h header file, to statically
initialize that structure. If using PTHREAD_ONCE_INIT, declare
the once_control record as follows:
pthread_once_t once_control = PTHREAD_ONCE_INIT;
Note that it is often easier to simply lock a statically
initialized mutex, check a control flag, and perform necessary
initialization (in-line) rather than using pthread_once(). For
example, you can code an initialization routine that begins with
the following basic logic:
init()
{
static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
static int flag = FALSE;
pthread_mutex_lock(&mutex);
if(!flag)
{
/* initialization code goes here */
flag = TRUE;
}
pthread_mutex_unlock(&mutex);
}
4 Return_Values
If an error occurs, this routine returns an integer indicating
the type of error. Possible return values are as follows:
Return Description
0 Successful completion
[EINVAL] Invalid argument
3 pthread_rwlockattr_destroy
Destroys a previously initialized read-write lock attributes
object.
4 C_Binding
#include <pthread.h>
int
pthread_rwlockattr_destroy (
pthread_rwlockattr_t *attr);
4 Arguments
attr
Address of the read-write lock attributes object to be destroyed.
4 Description
This routine destroys the read-write lock attributes object
referenced by attr; that is, the object becomes uninitialized.
After successful completion of this routine, the results of using
attr in a call to any routine (other than pthread_rwlockattr_
init()) are unpredictable.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by attr is not a valid attributes
block.
4 Associated_Routines
pthread_rwlockattr_init()
pthread_rwlock_init()
3 pthread_rwlockattr_init
Initializes a read-write lock attributes object.
4 C_Binding
#include <pthread.h>
int
pthread_rwlockattr_init (
pthread_rwlockattr_t *attr);
4 Arguments
attr
Address of the read-write lock attributes object to be
initialized.
4 Description
This routine initializes the read-write lock attributes object
referenced by attr and sets its attributes with default values.
The results of calling this routine are undefined if attr
references an already initialized read-write lock attributes
object.
After an initialized read-write lock attributes object has been
used to initialize one or more read-write lock objects, any
operation on that attributes object (including destruction) has
no effect on those read-write lock objects.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion
[ENOMEM] Insufficient memory to initialize the read-write lock
attributes object
4 Associated_Routines
pthread_rwlockattr_destroy()
pthread_rwlock_init()
3 pthread_rwlock_destroy
Destroys a read-write lock object.
4 C_Binding
#include <pthread.h>
int
pthread_rwlock_destroy (
pthread_rwlock_t *rwlock);
4 Arguments
rwlock
Address of the read-write lock object to be destroyed.
4 Description
This routine destroys the specified read-write lock object by
uninitializing it, and should be called when the object is no
longer referenced in your program. After this routine is called,
the Threads Library may reclaim internal storage used by the
specified read-write lock object. The effect of subsequent use of
the lock is undefined until the lock is reinitialized by another
call to pthread_rwlock_init().
It is illegal to destroy a locked read-write lock.
The results of this routine are unpredictable if the specified
read-write lock object does not currently exist or is not
initialized. This routine destroys the read-write lock object
specified by the rwlock argument and releases any resources that
the object used.
A destroyed read-write lock object can be reinitialized using the
pthread_rwlock_init() routine. The results of otherwise
referencing a destroyed read-write lock object are undefined.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EBUSY] An attempt was made to destroy the object referenced
by rwlock while it is locked or referenced.
4 Associated_Routines
pthread_rwlock_init()
3 pthread_rwlock_getname_np
Obtains the object name from a read-write lock object.
4 C_Binding
#include <pthread.h>
int
pthread_rwlock_getname_np (
pthread_rwlock_t *rwlock,
char *name,
size_t len);
4 Arguments
rwlock
Address of the read-write lock object whose object name is to be
obtained.
name
Location to store the obtained object name.
len
Length in bytes of buffer at the location specified by name.
4 Description
This routine copies the object name from the read-write lock
object specified by rwlock to the buffer at the location name.
Before calling this routine, your program must allocate the
buffer indicated by name.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
If the specified read-write lock object has not been previously
set with an object name, this routine copies a C language null
string into the buffer at location name.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by rwlock is not a valid read-
write lock.
4 Associated_Routines
pthread_rwlock_setname_np()
3 pthread_rwlock_init
Initializes a read-write lock object.
4 C_Binding
#include <pthread.h>
int
pthread_rwlock_init (
pthread_rwlock_t *rwlock,
const pthread_rwlockattr_t *attr);
4 Arguments
rwlock
Read-write lock object to be initialized.
attr
Read-write lock attributes object that defines the
characteristics of the read-write lock to be initialized.
4 Description
This routine initializes a read-write lock object with the
attributes specified by the read-write lock attributes object
specified in attr. A read-write lock is a synchronization object
that serializes access to shared information that needs to be
read frequently and written only occasionally. A thread can
acquire a read-write lock for shared read access or for exclusive
write access.
Upon successful completion of this routine, the read-write lock
is initialized and set to the unlocked state. If attr is set to
NULL, the default read-write lock attributes are used; the effect
is the same as passing the address of a default read-write lock
attributes object. Once initialized, the lock can be used any
number of times without being reinitialized.
Results of calling this routine are undefined if attr specifies
an already initialized read-write lock or if rwlock is used
without first being initialized.
If this routine returns unsuccessfully, rwlock is not initialized
and the contents of rwlock are undefined.
A read-write lock is a resource of the process, not part of any
particular thread. A read-write lock is neither destroyed not
unlocked automatically when any thread exits. Because read-write
locks are shared, they may be allocated in heap or static memory,
but not on a stack.
In cases where default read-write lock attributes are
appropriate, you may use the PTHREAD_RWLOCK_INITIALIZER macro
to statically initialize the lock object without calling this
routine. The effect is equivalent to dynamic initialization by
a call to pthread_rwlock_init() with attr specified as NULL,
except that no error checks are performed. Statically initialized
read-write locks need not be destroyed using pthread_rwlock_
destroy().
Use the PTHREAD_RWLOCK_INITIALIZER macro as follows:
pthread_rwlock_t rwlock= PTHREAD_RWLOCK_INITIALIZER;
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EAGAIN] The system lacks the necessary resources to
initialize the read-write lock.
[EBUSY] The Threads Library has detected an attempt to
reinitialize the read-write lock (a previously
initialized, but not yet destroyed, read-write lock
object).
[EINVAL] The value specified by attr is not a valid attributes
block.
[ENOMEM] Insufficient memory exists to initialize the read-
write lock.
[EPERM] The caller does not have privileges to perform this
operation.
4 Associated_Routines
pthread_rwlock_destroy()
3 pthread_rwlock_rdlock
Acquires a read-write lock object for read access.
4 C_Binding
#include <pthread.h>
int
pthread_rwlock_rdlock (
pthread_rwlock_t *rwlock);
4 Arguments
rwlock
Address of the read-write lock object to acquire for read access.
4 Description
This routine acquires a read-write lock for read access. If no
thread already holds the lock for write access and there are no
writers waiting to acquire the lock, the lock for read access
is granted to the calling thread and this routine returns. If
a thread already holds the lock for read access, the lock is
granted and this routine returns.
A thread can hold multiple, concurrent locks for read access on
the same read-write lock. In a given thread, for each call to
this routine that successfully acquires the same read-write lock
for read access, a corresponding call to pthread_rwlock_unlock
must be issued.
If some thread already holds the lock for write access, the
calling thread will not acquire the read lock. If the read lock
is not acquired, the calling thread blocks until it can acquire
the lock for read access. Results are undefined if the calling
thread has already acquired a lock for write access on rwlock
when this routine is called.
If the read-write lock object referenced by rwlock is not
initialized, the results of calling this routine are undefined.
If a thread is interrupted (via a Tru64 UNIX signal or an OpenVMS
AST) while waiting for a read-write lock for read access, upon
return from the interrupt routine the thread resumes waiting for
the lock as if it had not been interrupted.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion; the read-write lock object was
acquired for read access.
[EINVAL] The value specified by rwlock does not refer to an
initialized read-write lock object.
[EDEADLCK] The calling thread already owns the specified read-
write lock object for write access.
[EAGAIN] The lock for read access could not be acquired
because the maximum number of read lock acquisitions
for rwlock has been exceeded.
4 Associated_Routines
pthread_rwlock_init()
pthread_rwlockattr_init()
pthread_rwlock_tryrdlock()
pthread_rwlock_wrlock()
pthread_rwlock_unlock()
3 pthread_rwlock_setname_np
Changes the object name in a read-write lock object.
4 C_Binding
#include <pthread.h>
int
pthread_rwlock_setname_np (
pthread_rwlock_t *rwlock,
const char *name,
void *mbz);
4 Arguments
rwlock
Address of the read-write lock object whose object name is to be
changed.
name
Object name value to copy into the read-write lock object.
mbz
Reserved for future use. The value must be zero (0).
4 Description
This routine changes the object name in the read-write lock
object specified by rwlock to the value specified by name. To
set a new read-write lock object's object name, call this routine
immediately after initializing the read-write lock object.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion, the read-write lock object was
acquired for read access.
[EINVAL] The value specified by rwlock is invalid, or the
length in characters of name exceeds 31.
[ENOMEM] Insufficient memory to create a copy of the object
name string.
4 Associated_Routines
pthread_rwlock_getname_np()
pthread_rwlock_init()
3 pthread_rwlock_tryrdlock
Attempts to acquire a read-write lock object for read access
without waiting.
4 C_Binding
#include <pthread.h>
int
pthread_rwlock_tryrdlock (
pthread_rwlock_t *rwlock);
4 Arguments
rwlock
Address of the read-write lock object to acquire for read access.
4 Description
This routine attempts to acquire a read-write lock for read
access, but does not wait for the lock if it not immediately
available.
If no thread already holds the lock for write access and there
are no writers waiting to acquire the lock, the lock for read
access is granted to the calling thread and this routine returns.
If a thread already holds the lock for read access, the lock is
granted and this routine returns.
If some thread already holds the lock for write access, the
calling thread will not acquire the read lock. Results are
undefined if the calling thread has already acquired a lock for
write access on rwlock when this routine is called.
A thread can hold multiple, concurrent locks for read access on
the same read-write lock. In a given thread, for each call to
this routine that successfully acquires the same read-write lock
for read access, a corresponding call to pthread_rwlock_unlock()
must be issued.
If the read-write lock object referenced by rwlock is not
initialized, the results of calling this routine are undefined.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion; the read-write lock object was
acquired for read access.
[EAGAIN] The lock for read access could not be acquired
because the maximum number of read lock acquisitions
for rwlock has been exceeded.
[EBUSY] The read-write lock could not be acquired for read
access because another thread already acquired it
for write access or is blocked and waiting for it for
write access.
[EDEADLCK] The current thread already owns the read-write lock
for writing.
[EINVAL] The value specified by rwlock does not refer to an
initialized read-write lock object.
4 Associated_Routines
pthread_rwlockattr_init()
pthread_rwlock_init()
pthread_rwlock_rdlock()
pthread_rwlock_unlock()
pthread_rwlock_wrlock()
3 pthread_rwlock_trywrlock
Attempts to acquire a read-write lock object for write access
without waiting.
4 C_Binding
#include <pthread.h>
int
pthread_rwlock_trywrlock (
pthread_rwlock_t *rwlock);
4 Arguments
rwlock
Address of the read-write lock object to acquire for write
access.
4 Description
This routine attempts to acquire the read-write lock referenced
by rwlock for write access. If any thread already holds that lock
for write access or read access, this routine fails and returns
[EBUSY] and the calling thread does not wait for the lock to
become available.
Results are undefined if the calling thread holds the read-write
lock (whether for read or write access) at the time this routine
is called.
If the read-write lock object referenced by rwlock is not
initialized, the results of calling this routine are undefined.
Realtime applications can encounter priority inversion when using
read-write locks. The problem occurs when a high-priority thread
acquires a read-write lock that is about to be unlocked (that
is, posted) by a low-priority thread, but the low-priority thread
is preempted by a medium-priority thread. This scenario leads to
priority inversion in that a high-priority thread is blocked by
lower-priority threads for an unlimited period of time. During
system design, realtime programmers must take into account the
possibility of priority inversion and can deal with it in a
number of ways, such as by having critical sections that are
guarded by read-write locks execute at a high priority, so that
a thread cannot be preempted while executing in its critical
section.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion, the read-write lock object was
acquired for write access.
[EBUSY] The read-write lock could not be acquired for write
access because it was already locked for write access
or for read access.
[EDEADLCK] The current thread already owns the read-write lock
for write or read access.
[EINVAL] The value specified by rwlock does not refer to an
initialized read-write lock object.
4 Associated_Routines
pthread_rwlockattr_init()
pthread_rwlock_init()
pthread_rwlock_rdlock()
pthread_rwlock_unlock()
pthread_rwlock_wrlock()
3 pthread_rwlock_unlock
Unlocks a read-write lock object.
4 C_Binding
#include <pthread.h>
int
pthread_rwlock_unlock (
pthread_rwlock_t *rwlock);
4 Arguments
rwlock
Address of the read-write lock object to be unlocked.
4 Description
This routine releases a lock acquisition held on the read-write
lock object referenced by rwlock. Results are undefined if rwlock
is not held by the calling thread.
If this routine is called to release a lock for read access on
rwlock and the calling thread also currently holds other locks
for read access on rwlock, the read-write lock object remains
in the read locked state. If this routine releases the calling
thread's last lock for read access on rwlock, the calling thread
is no longer one of the owners of the lock object.
If this routine is called to release a lock for write access
on rwlock, the lock object is put in the unlocked state with no
owners.
If a call to this routine results in the read-write lock object
becoming unlocked and there are multiple threads waiting to
acquire that lock for write access, the Threads Library uses
the scheduling policy of those waiting threads to determine
which thread next acquires the lock object for write access. If
there are multiple threads waiting to acquire the read-write lock
object for read access, the Threads Library uses the scheduling
policy of those waiting threads to determine the order in which
those threads acquire the lock for read access. If there are
multiple threads waiting to acquire the read-write lock object
for both read and write access, it is unspecified whether a
thread waiting for read access or for write access next acquires
the lock object.
If the read-write lock object referenced by rwlock is not
initialized, the results of calling this routine are undefined.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The values specified by rwlock does not refer to an
initialized read-write lock object.
[EPERM] The calling thread does not hold the read-write lock
object.
4 Associated_Routines
pthread_rwlockattr_init()
pthread_rwlock_init()
pthread_rwlock_rdlock()
pthread_rwlock_wrlock()
3 pthread_rwlock_wrlock
Acquires a read-write lock for write access.
4 C_Binding
#include <pthread.h>
int
pthread_rwlock_wrlock (
pthread_rwlock_t *rwlock);
4 Arguments
rwlock
Address of the read-write lock object to acquire for write
access.
4 Description
This routine attempts to acquire a read-write lock for write
access. If any thread already has acquired the lock for write
access or read access, the lock is not granted and the calling
thread blocks until it can acquire the lock. A thread can hold
only one lock for write access on a read-write lock.
Results are undefined if the calling thread holds the read-write
lock (whether for read or write access) at the time this routine
is called.
If the read-write lock object referenced by rwlock is not
initialized, the results of calling this routine are undefined.
If a thread is interrupted (via a Tru64 UNIX signal or an OpenVMS
AST) while waiting for a read-write lock for write access, upon
return from the interrupt routine the thread resumes waiting for
the lock as if it had not been interrupted.
Realtime applications can encounter priority inversion when using
read-write locks. The problem occurs when a high-priority thread
acquires a read-write lock that is about to be unlocked (that
is, posted) by a low-priority thread, but the low-priority thread
is preempted by a medium-priority thread. This scenario leads to
priority inversion in that a high-priority thread is blocked by
lower-priority threads for an unlimited period of time. During
system design, realtime programmers must take into account the
possibility of priority inversion and can deal with it in a
number of ways, such as by having critical sections that are
guarded by read-write locks execute at a high priority, so that
a thread cannot be preempted while executing in its critical
section.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion, the read-write lock object was
acquired for write access.
[EDEADLCK] The calling thread already owns the read-write lock
for write or read access.
[EINVAL] The value specified by rwlock does not refer to an
initialized read-write lock object.
4 Associated_Routines
pthread_rwlockattr_init()
pthread_rwlock_init()
pthread_rwlock_rdlock()
pthread_rwlock_trywrlock()
pthread_rwlock_unlock()
3 pthread_self
Obtains the identifier of the calling thread.
4 C_Binding
#include <pthread.h>
pthread_t
pthread_self (void);
4 Arguments
None
4 Description
This routine returns the address of the calling thread's own
thread identifier. For example, you can use this thread object
to obtain the calling thread's own sequence number. To do so,
pass the return value from this routine in a call to the pthread_
getsequence_np() routine, as follows:
.
.
.
unsigned long this_thread_nbr;
.
.
.
this_thread_nbr = pthread_getsequence_np( pthread_self( ) );
.
.
.
The return value from the pthread_self() routine becomes
meaningless after the calling thread is destroyed.
4 Return_Values
Returns the address of the calling thread's own thread object.
4 Associated_Routines
pthread_cancel()
pthread_create()
pthread_detach()
pthread_exit()
pthread_getsequence_np()
pthread_join()
pthread_kill()
pthread_sigmask()
3 pthread_setcancelstate
Sets the calling thread's cancelability state.
4 C_Binding
#include <pthread.h>
int
pthread_setcancelstate (
int state,
int *oldstate );
4 Arguments
state
State of general cancelability to set for the calling thread. The
following are valid cancel state values:
PTHREAD_CANCEL_ENABLE
PTHREAD_CANCEL_DISABLE
oldstate
Previous cancelability state for the calling thread.
4 Description
This routine sets the calling thread's cancelability state and
returns the calling thread's previous cancelability state in
oldstate.
When cancelability state is set to PTHREAD_CANCEL_DISABLE, a
cancelation request cannot be delivered to the thread, even if a
cancelable routine is called or asynchronous cancelability type
is enabled.
When a thread is created, its default cancelability state is
PTHREAD_CANCEL_ENABLE.
Possible Problems When Disabling Cancelability
The most important use of thread cancelation is to ensure
that indefinite wait operations are terminated. For example, a
thread that waits on some network connection, which can possibly
take days to respond (or might never respond), should be made
cancelable.
When a thread's cancelability is disabled, no routine in that
thread is cancelable. As a result, the user is unable to
cancel the operation performed by that thread. When disabling
cancelability, be sure that no long waits can occur or that it is
necessary for other reasons to defer cancelation requests around
that particular region of code.
4 Return_Values
On successful completion, this routine returns the calling
thread's previous cancelability state in the location specified
by the oldstate argument.
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The specified state is not PTHREAD_CANCEL_ENABLE or
PTHREAD_CANCEL_DISABLE.
4 Associated_Routines
pthread_cancel()
pthread_setcanceltype()
pthread_testcancel()
3 pthread_setcanceltype
Sets the calling thread's cancelability type.
4 C_Binding
#include <pthread.h>
int
pthread_setcanceltype (
int type,
int *oldtype);
4 Arguments
type
The cancelability type to set for the calling thread. The
following are valid values:
PTHREAD_CANCEL_DEFERRED
PTHREAD_CANCEL_ASYNCHRONOUS
oldtype
Returns the previous cancelability type.
4 Description
This routine sets the cancelability type and returns the previous
type in location oldtype.
When a thread's cancelability state is set to PTHREAD_CANCEL_
DISABLE, (see pthread_setcancelstate()), a cancelation request
cannot be delivered to that thread, even if a cancelable routine
is called or asynchronous cancelability type is enabled.
When the cancelability state is set to PTHREAD_CANCEL_ENABLE,
cancelability depends on the thread's cancelability type, as
follows:
o If the thread's cancelability type is PTHREAD_CANCEL_DEFERRED,
the thread can only receive a cancelation request at a
cancelation point (including condition waits, thread joins,
and calls to pthread_testcancel()).
o If the thread's cancelability type is PTHREAD_CANCEL_
ASYNCHRONOUS, the thread can be canceled at any point in its
execution.
When a thread is created, the default cancelability type is
PTHREAD_CANCEL_DEFERRED.
CAUTION
If the asynchronous cancelability type is set, do not call
any routine unless it is explicitly documented as "safe for
asynchronous cancelation." Note that none of the general
run-time libraries and none of the POSIX Threads libraries
are safe for asynchronous cancelation except for pthread_
setcanceltype() and pthread_setcancelstate().
Use asynchronous cancelability only when you have a compute-
bound section of code that carries no state and makes no
routine calls.
4 Return_Values
On successful completion, this routine returns the previous
cancelability type in oldtype.
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The specified type is not PTHREAD_CANCEL_DEFERRED or
PTHREAD_CANCEL_AYNCHRONOUS.
4 Associated_Routines
pthread_cancel()
pthread_setcancelstate()
pthread_testcancel()
3 pthread_setconcurrency
Changes the value of the concurrency level global variable for
this process.
4 C_Binding
#include <pthread.h>
int
pthread_setconcurrency (
int level);
4 Arguments
level
New value for the concurrency level for this process.
4 Description
This routine stores the value specified in the level argument in
the "concurrency level" global setting for the calling thread's
process. Because the Threads Library automatically manages the
concurrency of all threads in a multithreaded process, it ignores
this concurrency level value.
"Concurrency level" is a parameter used to coerce "simple" 2-
level schedulers into allowing application concurrency. The
Threads Library supplies the maximum concurrency at all times,
automatically. It has no need for coercion, and calls pthread_
setconcurrency() merely to determine the value returned by the
next call to pthread_getconcurrency().
The concurrency level value has no effect on the behavior of a
multithreaded program that uses the Threads Library. This routine
is provided for Single UNIX Specification, Version 2 source code
compatibility and has no other effect when called.
After calling this routine, subsequent calls to the pthread_
getconcurrency() routine return the same value, until another
call to pthread_setconcurrency() changes that value.
The initial concurrency level is zero (0), indicating that the
Threads Library manages the concurrency level. To indicate in a
portable manner that the implementation is to resume control of
concurrency level, call this routine with a level argument of
zero (0).
The concurrency level value can be obtained using the pthread_
getconcurrency() routine.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EAGAIN] The value specified by new_level would cause a system
resource to be exceeded.
[EINVAL] The value specified by new_level is negative.
4 Associated_Routines
pthread_getconcurrency()
3 pthread_setname_np
Changes the object name in the thread object for an existing
thread.
4 C_Binding
#include <pthread.h>
int
pthread_setname_np (
pthread_thread_t thread,
const char *name,
void *mbz);
4 Arguments
thread
Thread object whose object name is to be changed.
name
Object name value to copy into the thread object.
mbz
Reserved for future use. The value must be zero (0).
4 Description
This routine changes the object name in the thread object for the
thread specified by the thread argument to the value specified
by the name argument. To set an existing thread's object name,
call this routine after creating the thread. However, with this
approach your program must account for the possibility that the
target thread either has already exited or has been canceled
before this routine is called.
The object name is a C language string and provides an identifier
that is meaningful to a person debugging a multithreaded
application. The maximum number of characters in the object name
is 31.
This routine contrasts with pthread_attr_setname_np(), which
changes the object name attribute in a thread attributes object
that is used to create a new thread.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The length in characters of name exceeds 31.
[ENOMEM] Insufficient memory to create a copy of the object
name string.
[ESRCH] The thread specified by thread does not exist.
4 Associated_Routines
pthread_attr_getname_np()
pthread_attr_setname_np()
pthread_getname_np()
3 pthread_setschedparam
Changes a thread's scheduling policy and scheduling parameters.
4 C_Binding
#include <pthread.h>
int
pthread_setschedparam (
pthread_t thread,
int policy,
const struct sched_param *param);
4 Arguments
thread
Thread whose scheduling policy and parameters are to be changed.
policy
New scheduling policy value for the thread specified in thread.
The following are valid values:
SCHED_BG_NP
SCHED_FG_NP
SCHED_FIFO
SCHED_OTHER
SCHED_RR
param
New values of the scheduling parameters associated with the
scheduling policy for the thread specified in thread. Valid
values for the sched_priority field of a sched_param structure
depend on the chosen scheduling policy. Use the POSIX routines
sched_get_priority_min() or sched_get_priority_max() to
determine the low and high limits of each policy.
Additionally, the Threads Librray provides nonportable priority
range constants, as follows:
Low High
PRI_FIFO_MIN PRI_FIFO_MAX
PRI_RR_MIN PRI_RR_MAX
PRI_OTHER_MIN PRI_OTHER_MAX
PRI_FG_MIN_NP PRI_FG_MAX_NP
PRI_BG_MIN_NP PRI_BG_MAX_NP
The default priority varies by platform. On Tru64 UNIX, the
default is 19 (that is, the POSIX priority of a normal timeshare
process). On other platforms the default priority is the midpoint
between PRI_FG_MIN_NP and PRI_FG_MAX_NP.
4 Description
This routine changes both the current scheduling policy and
associated scheduling parameters of the thread specified by
thread to the policy and associated parameters provided in policy
and param, respectively.
All currently implemented scheduling policies have one scheduling
parameter called sched_priority. For the policy you choose, you
must specify an appropriate value in the sched_priority field of
the sched_param structure.
Changing the scheduling policy or priority, or both, of a thread
can cause it either to start executing or to be preempted by
another thread. A thread changes its own scheduling policy and
priority by using the handle returned by the pthread_self()
routine.
This routine differs from pthread_attr_setschedpolicy() and
pthread_attr_setschedparam(), in that those routines set the
scheduling policy and parameter attributes that are used to
establish the scheduling priority and scheduling policy of a
new thread when it is created. However, this routine changes the
scheduling policy and parameters of an existing thread.
4 Return_Values
If an error condition occurs, no scheduling policy or parameters
are changed for the target thread, and this routine returns
an integer value indicating the type of error. Possible return
values are as follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by policy or param is invalid.
[ENOTSUP] An attempt was made to set the scheduling policy or a
parameter to an unsupported value.
[EPERM] The caller does not have the appropriate privileges
to set the scheduling policy or parameters of the
specified thread.
[ESRCH] The value specified by thread does not refer to an
existing thread.
4 Associated_Routines
pthread_attr_setschedparam()
pthread_attr_setschedpolicy()
pthread_create()
pthread_self()
sched_yield()
3 pthread_setspecific
Sets the thread-specific data value associated with the specified
key for the calling thread.
4 C_Binding
#include <pthread.h>
int
pthread_setspecific (
pthread_key_t key,
const void *value);
4 Arguments
key
Thread-specific key that identifies the thread-specific data to
receive value. This key value must be obtained from pthread_key_
create().
value
New thread-specific data value to associate with the specified
key for the calling thread.
4 Description
This routine sets the thread-specific data value associated with
the specified key for the current thread. If a value is defined
for the key in this thread (the current value is not NULL),
the new value is substituted for it. The key is obtained by a
previous call to pthread_key_create().
Different threads can bind different values to the same key.
These values are typically pointers to blocks of dynamically
allocated memory that are reserved for use by the calling thread.
Do not call this routine from a thread-specific data destructor
function.
Note that although the type for value (void *) implies that it
represents an address, the type is being used as a "universal
scalar type." The Threads Library simply stores value for later
retrieval.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The specified key is invalid.
[ENOMEM] Insufficient memory to associate the value with the
key.
4 Associated_Routines
pthread_getspecific()
pthread_key_create()
pthread_key_delete()
3 pthread_testcancel
Requests delivery of a pending cancelation request to the calling
thread.
4 C_Binding
#include <pthread.h>
void
pthread_testcancel (void);
4 Arguments
None
4 Description
This routine requests delivery of a pending cancelation request
to the calling thread. Thus, calling this routine creates a
cancelation point within the calling thread.
The cancelation request is delivered only if a request is pending
for the calling thread and the calling thread's cancelability
state is enabled. (A thread disables delivery of cancelation
requests to itself by calling pthread_setcancelstate().)
When called within very long loops, this routine ensures that
a pending cancelation request is noticed by the calling thread
within a reasonable amount of time.
4 Return_Values
None
4 Associated_Routines
pthread_setcancelstate()
3 pthread_unlock_global_np
Unlocks the Threads Library global mutex.
4 C_Binding
#include <pthread.h>
int
pthread_unlock_global_np (void);
4 Arguments
None
4 Description
This routine unlocks the Threads Library global mutex. Because
the global mutex is recursive, the unlock occurs when each call
to pthread_lock_global_np() has been matched by a call to this
routine. For example, if you called pthread_lock_global_np()
three times, pthread_unlock_global_np() unlocks the global mutex
when you call it the third time.
If no threads are waiting for the global mutex, it becomes
unlocked with no current owner. If one or more threads are
waiting to lock the global mutex, this routine causes one thread
to unblock and to try to acquire the global mutex. The scheduling
policy is used by this routine to determine which thread is
awakened. For the policies SCHED_FIFO and SCHED_RR, a blocked
thread is chosen in priority order, using first-in/first-out
(FIFO) within priorities.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EPERM] The mutex is unlocked or owned by another thread.
4 Associated_Routines
pthread_lock_global_np()
3 pthread_yield_np
Notifies the scheduler that the current thread is willing to
release its processor to other threads of the same or higher
priority.
Syntax
pthread_yield_np();
4 C_Binding
int
pthread_yield_np (void);
4 Arguments
None
4 Description
This routine notifies the thread scheduler that the current
thread is willing to release its processor to other threads of
equivalent or greater scheduling precedence. (A thread generally
will release its processor to a thread of a greater scheduling
precedence without calling this routine.) If no other threads of
equivalent or greater scheduling precedence are ready to execute,
the thread continues.
This routine can allow knowledge of the details of an application
to be used to improve its performance. If a thread does not call
pthread_yield_np(), other threads may be given the opportunity
to run at arbitrary points (possibly even when the interrupted
thread holds a required resource). By making strategic calls to
pthread_yield_np(), other threads can be given the opportunity
to run when the resources are free. This improves performance by
reducing contention for the resource.
As a general guideline, consider calling this routine after a
thread has released a resource (such as a mutex) which is heavily
contended for by other threads. This can be especially important
either if the program is running on a uniprocessor machine, or
if the thread acquires and releases the resource inside a tight
loop.
Use this routine carefully and sparingly, because misuse can
cause unnecessary context switching which will increase overhead
and actually degrade performance. For example, it is counter-
productive for a thread to yield while it holds a resource that
the threads to which it is yielding will need. Likewise, it is
pointless to yield unless there is likely to be another thread
that is ready to run.
NOTE
pthread_yield_np() is equivalent to sched_yield(). Use
sched_yield() since it is part of the standard portable
POSIX Threads Library.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[ENOSYS] The routine pthread_yield_np() is not supported by
this implementation.
4 Associated_Routines
pthread_attr_setschedparam()
pthread_getschedparam()
pthread_setschedparam()
2 TIS_routines
The Compaq proprietary TIS interface provides routines that
you use to build thread-safe libraries whose own routines
do not create threads, but which can safely be called from
a multithreaded environment. TIS routines are functionally
identical to their corresponding routines in the PTHREAD
interface. See the Guide to the POSIX Threads Library
documentation for more information.
In a program that creates threads, TIS routines provide full
thread synchronization and memory coherence. But, when run in
a program that does not use threads, the same TIS calls provide
low-overhead "stub" implementations of PTHREAD features. That
is, the objects created using the TIS interface are the same as
PTHREAD objects. When threads are present, the guidelines for
using PTHREAD routines apply also to the use of the corresponding
TIS routine.
3 tis_cond_broadcast
Wakes all threads that are waiting on a condition variable.
4 C_Binding
#include <tis.h>
int
tis_cond_broadcast (
pthread_cond_t *cond);
4 Arguments
cond
Address of the condition variable (passed by reference) on which
to broadcast.
4 Description
When threads are not present, this routine has no effect.
When threads are present, this routine unblocks all threads
waiting on the specified condition variable cond.
For further information about actions when threads are present,
refer to the pthread_cond_broadcast() description.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond is not a valid condition
variable.
4 Associated_Routines
tis_cond_destroy()
tis_cond_init()
tis_cond_signal()
tis_cond_wait()
3 tis_cond_destroy
Destroys the specified condition variable.
4 C_Binding
#include <tis.h>
int
tis_cond_destroy (
pthread_cond_t *cond);
4 Arguments
cond
Address of the condition variable (passed by reference) to be
destroyed.
4 Description
This routine destroys the condition variable specified by cond.
After this routine is called, the Threads Library may reclaim
internal storage used by the condition variable object. Call this
routine when a condition variable will no longer be referenced.
The results of this routine are unpredictable if the condition
variable specified in cond does not exist or is not initialized.
For more information about actions when threads are present,
refer to the pthread_cond_destroy() description.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EBUSY] The object being referenced by cond is being
referenced by another thread that is currently
executing a
tis_cond_wait() on the condition variable specified
in cond. (This error can only occur when threads are
present.)
[EINVAL] The value specified by cond is not a valid condition
variable.
4 Associated_Routines
tis_cond_broadcast()
tis_cond_init()
tis_cond_signal()
tis_cond_wait()
3 tis_cond_init
Initializes a condition variable.
4 C_Binding
#include <tis.h>
int
tis_cond_init (
pthread_cond_t *cond);
4 Arguments
cond
Address of the condition variable (passed by reference) to be
initialized.
4 Description
This routine initializes a condition variable (cond) with the
Threads Library default condition variable attributes.
A condition variable is a synchronization object used with a
mutex. A mutex controls access to shared data. When threads are
present, a condition variable allows threads to wait for data to
enter a defined state.
For more information about actions taken when threads are
present, refer to the pthread_cond_init() description.
Your program can use the macro PTHREAD_COND_INITIALIZER to
initialize statically allocated condition variables to the
default condition variable attributes. Static initialization
can be used only for a condition variable with storage class
"extern" or "static" - "automatic" (stack local) objects must
be initialized by calling tis_cond_init(). Use this macro as
follows:
pthread_cond_t condition = PTHREAD_COND_INITIALIZER;
When statically initialized, a condition variable should not also
be initialized using tis_cond_init().
4 Return_Values
If there is an error condition, the following occurs:
o The routine returns an integer value indicating the type of
error.
o The condition variable is not initialized.
o The contents of condition variable cond are undefined.
The possible return values are as follows:
Return Description
0 Successful completion.
[EAGAIN] The system lacks the necessary resources to
initialize another condition variable, or
The system-imposed limit on the total number of
condition variables under execution by a single user
is exceeded.
[EBUSY] The implementation has detected an attempt to
reinitialize the object referenced by cond, a
previously initialized, but not yet destroyed
condition variable.
[EINVAL] The value specified by cond is not a valid condition
variable.
[ENOMEM] Insufficient memory to initialize the condition
variable.
4 Associated_Routines
tis_cond_broadcast()
tis_cond_destroy()
tis_cond_signal()
tis_cond_wait()
3 tis_cond_signal
Wakes at least one thread that is waiting on the specified
condition variable.
4 C_Binding
#include <tis.h>
int
tis_cond_signal (
pthread_cond_t *cond);
4 Arguments
cond
Address of the condition variable (passed by reference) on which
to signal.
4 Description
When threads are present, this routine unblocks at least one
thread that is waiting on the specified condition variable cond.
When threads are not present, this routine has no effect.
For more information about actions taken when threads are
present, refer to the pthread_cond_signal() description.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond is not a valid condition
variable.
4 Associated_Routines
tis_cond_broadcast()
tis_cond_destroy()
tis_cond_init()
tis_cond_wait()
3 tis_cond_timedwait
Causes a thread to wait for the specified condition variable
to be signaled or broadcast, such that it will awake after a
specified period of time.
4 C_Binding
#include <tis.h>
int
tis_cond_timedwait (
pthread_cond_t *cond,
pthread_mutex_t *mutex,
const struct timespec *abstime);
4 Arguments
cond
Condition variable that the calling thread waits on.
mutex
Mutex associated with the condition variable specified in cond.
abstime
Absolute time at which the wait expires, if the condition has not
been signaled or broadcast. See the tis_get_expiration() routine,
which is used to obtain a value for this argument.
The abstime argument is specified in Universal Coordinated Time
(UTC). In the UTC-based model, time is represented as seconds
since the Epoch. The Epoch is defined as the time 0 hours, 0
minutes, 0 seconds, January 1st, 1970 UTC.
4 Description
If threads are not present, this function is equivalent to
sleep().
This routine causes a thread to wait until one of the following
occurs:
o The specified condition variable is signaled or broadcast.
o The current system clock time is greater than or equal to the
time specified by the abstime argument.
This routine is identical to tis_cond_wait(), except that this
routine can return before a condition variable is signaled or
broadcast, specifically, when the specified time expires. For
more information, see the tis_cond_wait() description.
This routine atomically releases the mutex and causes the calling
thread to wait on the condition. When the thread regains control
after calling tis_cond_timedwait(), the mutex is locked and the
thread is the owner. This is true regardless of why the wait
ended. If general cancelability is enabled, the thread reacquires
the mutex (blocking for it if necessary) before the cleanup
handlers are run (or before the exception is raised).
If the current time equals or exceeds the expiration time, this
routine returns immediately, releasing and reacquiring the mutex.
It might cause the calling thread to yield (see the sched_yield()
description). Your code should check the return status whenever
this routine returns and take the appropriate action. Otherwise,
waiting on the condition variable can become a nonblocking loop.
Call this routine after you have locked the mutex specified
in mutex. The results of this routine are unpredictable if
this routine is called without first locking the mutex. The
only routines that are supported for use with asynchronous
cancelability enabled are those that disable asynchronous
cancelability.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond, mutex, or abstime is
invalid, or
Different mutexes are supplied for concurrent
tis_cond_timedwait() operations or
tis_cond_wait() operations on the same condition
variable, or
The mutex was not owned by the calling thread at the
time of the call.
[ETIMEDOUT] The time specified by abstime expired.
[ENOMEM] The Threads Library cannot acquire memory needed
to block using a statically initialized condition
variable.
4 Associated_Routines
tis_cond_broadcast()
tis_cond_destroy()
tis_cond_init()
tis_cond_signal()
tis_cond_wait()
tis_get_expiration()
3 tis_cond_wait
Causes a thread to wait for the specified condition variable to
be signaled or broadcast.
4 C_Binding
#include <tis.h>
int
tis_cond_wait (
pthread_cond_t *cond,
pthread_mutex_t *mutex);
4 Arguments
cond
Address of the condition variable (passed by reference) on which
to wait.
mutex
Address of the mutex (passed by reference) that is associated
with the condition variable specified in cond.
4 Description
When threads are present, this routine causes a thread to wait
for the specified condition variable cond to be signaled or
broadcast.
Calling this routine in a single-threaded environment is a coding
error. Because no other thread exists to issue a call to tis_
cond_signal() or tis_cond_broadcast(), using this routine in a
single-threaded environment forces the program to exit.
For further information about actions taken when threads are
present, refer to the pthread_cond_wait() description.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by cond is not a valid condition
variable or the value specified by mutex is not a
valid mutex, or
Different mutexes are supplied for concurrent
tis_cond_wait() operations on the same condition
variable, or
The mutex was not owned by the calling thread at the
time of the call.
4 Associated_Routines
tis_cond_broadcast()
tis_cond_destroy()
tis_cond_init()
tis_cond_signal()
3 tis_getspecific
Obtains the data associated with the specified thread-specific
data key.
4 C_Binding
#include <tis.h>
void *
tis_getspecific (
pthread_key_t key);
4 Arguments
key
Identifies a value returned by a call to tis_key_create().
This routine returns the data value associated with the thread-
specific data key.
4 Description
This routine returns the value currently bound to the specified
thread-specific data key.
This routine can be called from a data destructor function.
When threads are present, the data and keys are thread specific;
they enable a library to maintain context on a per-thread basis.
4 Return_Values
No errors are returned. This routine returns the data value
associated with the specified thread-specific data key key. If
no data value is associated with key, or if key is not defined,
then a NULL value is returned.
4 Associated_Routines
tis_key_create()
tis_key_delete()
tis_setspecific()
3 tis_get_expiration
Obtains a value representing a desired expiration time.
4 C_Binding
#include <tis.h>
int
tis_get_expiration (
const struct timespec *delta,
struct timespec *abstime);
4 Arguments
delta
Number of seconds and nanoseconds to add to the current system
time. (The result is the time in the future.) This result will be
placed in abstime.
abstime
Value representing the absolute expiration time. The absolute
expiration time is obtained by adding delta to the current system
time. The resulting abstime is in Universal Coordinated Time
(UTC).
4 Description
If threads are not present, this routine has no effect.
This routine adds a specified interval to the current absolute
system time and returns a new absolute time. This new absolute
time is used as the expiration time in a call to tis_cond_
timedwait().
The timespec structure contains the following two fields:
o tv_sec is an integral number of seconds.
o tv_nsec is an integral number of nanoseconds.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by delta is invalid.
4 Associated_Routines
tis_cond_timedwait()
3 tis_io_complete
AST completion routine to VMS I/O system services.
This routine is for OpenVMS systems only.
4 C_Binding
#include <tis.h>
int
tis_io_complete (void);
4 Description
When you are performing thread-synchronous "wait-form" system
service calls on OpenVMS such as $QIOW, $ENQW, $GETJPIW, and
so on, you should use this routine and tis_sync() with the
asynchronous form of the service (in other words, without the
"W"), and specify the address of tis_io_complete() as the
completion AST routine (the AST argument if any is ignored).
That must also specify an IOSB (or equivalent, such as an LKSB)
and if possible a unique event flag (see lib$get_ef). Once the
library code is ready to wait for the I/O, it simply calls tis_
sync() (just as if it were calling $SYNC).
4 Return_Values
None.
4 Associated_Routines
tis_sync()
3 tis_key_create
Generates a unique thread-specific data key.
4 C_Binding
#include <tis.h>
int
tis_key_create (
pthread_key_t *key,
void (*destructor)(void *));
4 Arguments
key
Address of a variable that receives the key value. This value
is used in calls to tis_getspecific() and tis_setspecific() to
obtain and set the value associated with this key.
destructor
Address of a routine that is called to destroy the context value
when a thread terminates with a non-NULL value for the key. Note
that this argument is used only when threads are present.
4 Description
This routine generates a unique thread-specific data key. The key
argument points to an opaque object used to locate data.
This routine generates and returns a new key value. The key
reserves a cell. Each call to this routine creates a new cell
that is unique within an application invocation. Keys must
be generated from initialization code that is guaranteed to
be called only once within each process. (See the tis_once()
description for more information.)
Your program can associate an optional destructor function with
each key. At thread exit, if a key has a non-NULL destructor
function pointer, and the thread has a non-NULL value associated
with that key, the function pointed to is called with the current
associated value as its sole argument. The order in which data
destructors are called at thread termination is undefined.
When threads are present, keys and any corresponding data are
thread specific; they enable the context to be maintained on a
per-thread basis. For more information about the use of tis_key_
create() in a threaded environment, refer to the pthread_key_
create() description.
The Threads Library imposes a maximum number of thread-specific
data keys, equal to the symbolic constant PTHREAD_KEYS_MAX.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EAGAIN] The system lacked the necessary resources to create
another thread-specific data key, or the limit on the
total number of keys per process (PTHREAD_KEYS_MAX)
has been exceeded.
[EINVAL] The value specified by key is invalid.
[ENOMEM] Insufficient memory to create the key.
4 Associated_Routines
tis_getspecific()
tis_key_delete()
tis_setspecific()
tis_once()
3 tis_key_delete
Deletes the specified thread-specific data key.
4 C_Binding
#include <tis.h>
int
tis_key_delete (
pthread_key_t key);
4 Arguments
key
Thread-specific data key to be deleted.
4 Description
This routine deletes a thread-specific data key key previously
returned by a call to the tis_key_create() routine. The data
values associated with key need not be NULL at the time this
routine is called. The application must free any application
storage or perform any cleanup actions for data structures
related to the deleted key or associated data. This cleanup can
be done before or after this routine is called. If the cleanup
is done after this routine is called, the application must have a
private mechanism to access any and all thread-specific values,
contexts, and so on.
Attempting to use the thread-specific data key key after calling
this routine results in unpredictable behavior.
No destructor functions are invoked by this routine. Any
destructor functions that may have been associated with key will
no longer be called upon thread exit.
This routine can be called from destructor functions.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value for key is invalid.
4 Associated_Routines
tis_getspecific()
tis_key_create()
tis_setspecific()
3 tis_lock_global
Locks the Threads Library global mutex.
4 C_Binding
#include <tis.h>
int
tis_lock_global (void);
4 Arguments
None
4 Description
This routine locks the global mutex. The global mutex is
recursive. For example, if you called tis_lock_global() three
times, tis_unlock_global() unlocks the global mutex when you call
it the third time.
For more information about actions taken when threads are
present, refer to the pthread_lock_global_np() description.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
4 Associated_Routines
tis_unlock_global()
3 tis_mutex_destroy
Destroys the specified mutex object.
4 C_Binding
#include <tis.h>
int
tis_mutex_destroy (
pthread_mutex_t *mutex);
4 Arguments
mutex
Address of the mutex object (passed by reference) to be
destroyed.
4 Description
This routine destroys a mutex object by uninitializing it, and
should be called when a mutex object is no longer referenced.
After this routine is called, the Threads Library can reclaim
internal storage used by the mutex object.
It is safe to destroy an initialized mutex object that is
unlocked. However, it is illegal to destroy a locked mutex
object.
The results of this routine are unpredictable if the mutex object
specified in the mutex argument either does not currently exist
or is not initialized.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EBUSY] An attempt was made to destroy the object referenced
by mutex while it is locked or referenced.
[EINVAL] The value specified by mutex is not a valid mutex.
[EPERM] The caller does not have privileges to perform the
operation.
4 Associated_Routines
tis_mutex_init()
tis_mutex_lock()
tis_mutex_trylock()
tis_mutex_unlock()
3 tis_mutex_init
Initializes the specified mutex object.
4 C_Binding
#include <tis.h>
int
tis_mutex_init (
pthread_mutex_t *mutex );
4 Arguments
mutex
Pointer to a mutex object (passed by reference) to be
initialized.
4 Description
This routine initializes a mutex object with the Threads Library
default mutex attributes. A mutex is a synchronization object
that allows multiple threads to serialize their access to shared
data.
The mutex object is initialized and set to the unlocked state.
Your program can use the PTHREAD_MUTEX_INITIALIZER macro to
statically initialize a mutex object without calling this
routine. Static initialization can be used only for a condition
variable with storage class "extern" or "static" - "automatic"
(stack local) objects must be initialized by calling tis_mutex_
init(). Use this macro as follows:
pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EAGAIN] The system lacks the necessary resources to
initialize a mutex.
[EBUSY] The implementation has detected an attempt to
reinitialize mutex (a previously initialized, but
not yet destroyed, mutex).
[EINVAL] The value specified by mutex is not a valid mutex.
[ENOMEM] Insufficient memory to initialize the mutex.
[EPERM] The caller does not have privileges to perform this
operation.
4 Associated_Routines
tis_mutex_destroy()
tis_mutex_lock()
tis_mutex_trylock()
tis_mutex_unlock()
3 tis_mutex_lock
Locks an unlocked mutex.
4 C_Binding
#include <tis.h>
int
tis_mutex_lock (
pthread_mutex_t *mutex);
4 Arguments
mutex
Address of the mutex (passed by reference) to be locked.
4 Description
This routine locks the specified mutex mutex. A deadlock can
result if the owner of a mutex calls this routine in an attempt
to lock the same mutex a second time. (The Threads Library may
not detect or report the deadlock.)
In a threaded environment, the thread that has locked a mutex
becomes its current owner and remains the owner until the same
thread has unlocked it. This routine returns with the mutex
in the locked state and with the current thread as the mutex's
current owner.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EDEADLK] A deadlock condition is detected.
[EINVAL] The value specified by mutex is not a valid mutex.
4 Associated_Routines
tis_mutex_destroy()
tis_mutex_init()
tis_mutex_trylock()
tis_mutex_unlock()
3 tis_mutex_trylock
Attempts to lock the specified mutex.
4 C_Binding
#include <tis.h>
int
tis_mutex_trylock (
pthread_mutex_t *mutex);
4 Arguments
mutex
Address of the mutex (passed by reference) to be locked.
4 Description
This routine attempts to lock the specified mutex mutex. When
this routine is called, an attempt is made immediately to lock
the mutex. If the mutex is successfully locked, zero (0) is
returned.
If the specified mutex is already locked when this routine
is called, the caller does not wait for the mutex to become
available. [EBUSY] is returned, and the thread does not wait
to acquire the lock.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EBUSY] The mutex is already locked; therefore, it was not
acquired.
[EINVAL] The value specified by mutex is not a valid mutex.
4 Associated_Routines
tis_mutex_destroy()
tis_mutex_init()
tis_mutex_lock()
tis_mutex_unlock()
3 tis_mutex_unlock
Unlocks the specified mutex.
4 C_Binding
#include <tis.h>
int
tis_mutex_unlock (
pthread_mutex_t *mutex);
4 Arguments
mutex
Address of the mutex (passed by reference) to be unlocked.
4 Description
This routine unlocks the specified mutex mutex.
For more information about actions taken when threads are
present, refer to the pthread_mutex_unlock() description.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by mutex is not a valid mutex.
[EPERM] The caller does not own the mutex.
4 Associated_Routines
tis_mutex_destroy()
tis_mutex_init()
tis_mutex_lock()
tis_mutex_trylock()
3 tis_once
Calls a one-time initialization routine that can be executed by
only one thread, once.
4 C_Binding
#include <tis.h>
int
tis_once (
pthread_once_t *once_control,
void (*init_routine) (void));
4 Arguments
once_control
Address of a record (control block) that defines the one-time
initialization code. Any one-time initialization routine in
static storage specified by once_control must have its own unique
pthread_once_t record.
init_routine
Address of a procedure that performs the initialization. This
routine is called only once, regardless of the number of times it
and its associated once_control are passed to tis_once().
4 Description
The first call to this routine by a process with a given once_
control calls the init_routine with no arguments. Thereafter,
subsequent calls to tis_once() with the same once_control do
not call the init_routine. On return from tis_once(), it is
guaranteed that the initialization routine has completed.
For example, a mutex or a thread-specific data key must be
created exactly once. In a threaded environment, calling tis_
once() ensures that the initialization is serialized across
multiple threads.
NOTE
If you specify an init_routine that directly or indirectly
results in a recursive call to tis_once() and that specifies
the same init_block argument, the recursive call results in
a deadlock.
The PTHREAD_ONCE_INIT macro, defined in the pthread.h header
file, must be used to initialize a once_control record. Thus,
your program must declare a once_control record as follows:
pthread_once_t once_control = PTHREAD_ONCE_INIT;
Note that it is often easier to simply lock a statically
initialized mutex, check a control flag, and perform necessary
initialization (in-line) rather than using tis_once(). For
example, you can code an "init" routine that begins with the
following basic logic:
init()
{
static pthread_mutex_t mutex = PTHREAD_MUTEX_INIT;
static int flag = FALSE;
tis_mutex_lock(&mutex);
if(!flag)
{
flag = TRUE;
/* initialize code */
}
tis_mutex_unlock(&mutex);
}
4 Return_Values
If an error occurs, this routine returns an integer indicating
the type of error. Possible return values are as follows:
Return Description
0 Successful completion.
[EINVAL] Invalid argument.
3 tis_read_lock
Acquires a read-write lock for read access.
4 C_Binding
#include <tis.h>
int
tis_read_lock (
tis_rwlock_t *lock);
4 Arguments
lock
Address of the read-write lock.
4 Description
This routine acquires a read-write lock for read access. This
routine waits for any existing lock holder for write access to
relinquish its lock before granting the lock for read access.
This routine returns when the lock is acquired. If the lock is
already held simply for read access, the lock is granted.
For each call to tis_read_lock() that successfully acquires the
lock for read access, a corresponding call to tis_read_unlock()
must be issued.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by lock is not a valid read-write
lock.
4 Associated_Routines
tis_read_trylock()
tis_read_unlock()
tis_rwlock_destroy()
tis_rwlock_init()
tis_write_lock()
tis_write_trylock()
tis_write_unlock()
3 tis_read_trylock
Attempts to acquire a read-write lock for read access. Does not
wait if the lock cannot be immediately granted.
4 C_Binding
#include <tis.h>
int
tis_read_trylock (
tis_rwlock_t *lock);
4 Arguments
lock
Address of the read-write lock to be acquired.
4 Description
This routine attempts to acquire a read-write lock for read
access. If the lock cannot be granted, the routine returns
without waiting.
When a thread calls this routine, an attempt is made to
immediately acquire the lock for read access. If the lock is
acquired, zero (0) is returned. If a holder of the lock for write
access exists, [EBUSY] is returned.
If the lock cannot be acquired for read access immediately, the
calling program does not wait for the lock to be released.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion; the lock was acquired.
[EBUSY] The lock is being held for write access. The lock for
read access was not acquired.
[EINVAL] The value specified by lock is not a valid read-write
lock.
4 Associated_Routines
tis_read_lock()
tis_read_unlock()
tis_rwlock_destroy()
tis_rwlock_init()
tis_write_lock()
tis_write_trylock()
tis_write_unlock()
3 tis_read_unlock
Unlocks a read-write lock that was acquired for read access.
4 C_Binding
#include <tis.h>
int
tis_read_unlock (
tis_rwlock_t *lock);
4 Arguments
lock
Address of the read-write lock to be unlocked.
4 Description
This routine unlocks a read-write lock that was acquired for
read access. If there are no other holders of the lock for read
access and another thread is waiting to acquire the lock for
write access, that lock acquisition is granted.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by lock is not a valid read-write
lock.
4 Associated_Routines
tis_read_lock()
tis_read_trylock()
tis_rwlock_destroy()
tis_rwlock_init()
tis_write_lock()
tis_write_trylock()
tis_write_unlock()
3 tis_rwlock_destroy
Destroys the specified read-write lock object.
4 C_Binding
#include <tis.h>
int
tis_rwlock_destroy (
tis_rwlock_t *lock);
4 Arguments
lock
Address of the read-write lock object to be destroyed.
4 Description
This routine destroys the specified read-write lock object. Prior
to calling this routine, ensure that there are no locks granted
to the specified read-write lock and that there are no threads
waiting for pending lock acquisitions on the specified read-write
lock.
This routine should be called only after all reader threads (and
perhaps one writer thread) have finished using the specified
read-write lock.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EBUSY] The lock is in use.
[EINVAL] The value specified by lock is not a valid read-write
lock.
4 Associated_Routines
tis_read_lock()
tis_read_trylock()
tis_read_unlock()
tis_rwlock_init()
tis_write_lock()
tis_write_trylock()
tis_write_unlock()
3 tis_rwlock_init
Initializes a read-write lock object.
4 C_Binding
#include <tis.h>
int
tis_rwlock_init (
tis_rwlock_t *lock);
4 Arguments
lock
Address of a read-write lock object.
4 Description
This routine initializes a read-write lock object. The routine
initializes the tis_rwlock_t structure that holds the object's
lock states.
To destroy a read-write lock object, call the tis_rwlock_
destroy() routine.
NOTE
The tis read-write lock has no relationship to the Single
UNIX Specification, Version 2 (SUSV2, or UNIX98) read-
write lock routines (such as pthread_rwlock_init()). The
tis_rwlock_t type, in particular, cannot be used with the
pthread read-write lock functions, nor can a pthread_rwlock_
t type be used with the tis read-write lock functions.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by lock is not a valid read-write
lock.
[ENOMEM] Insufficient memory to initialize lock.
4 Associated_Routines
tis_read_lock()
tis_read_trylock()
tis_read_unlock()
tis_rwlock_destroy()
tis_write_lock()
tis_write_trylock()
tis_write_unlock()
3 tis_self
Returns the identifier of the calling thread.
4 C_Binding
#include <tis.h>
pthread_t
tis_self (void);
4 Arguments
None
4 Description
This routine allows a thread to obtain its own thread identifier.
This value becomes meaningless when the thread is destroyed.
Note that the initial thread in a process can "change identity"
when thread system initialization completes-that is, when the
multithreading run-time environment is loaded.
4 Return_Values
Returns the thread identifier of the calling thread.
4 Associated_Routines
pthread_create()
3 tis_setcancelstate
Changes the calling thread's cancelability state.
4 C_Binding
#include <tis.h>
int
tis_setcancelstate (
int state,
int *oldstate );
4 Arguments
state
State of general cancelability to set for the calling thread.
Valid state values are as follows:
PTHREAD_CANCEL_ENABLE
PTHREAD_CANCEL_DISABLE
oldstate
Receives the value of the calling thread's previous cancelability
state.
4 Description
This routine sets the calling thread's cancelability state to
the value specified in the state argument and returns the calling
thread's previous cancelability state in the location referenced
by the oldstate argument.
When a thread's cancelability state is set to PTHREAD_CANCEL_
DISABLE, a cancelation request cannot be delivered to the
thread, even if a cancelable routine is called or asynchronous
cancelability is enabled.
When a thread is created, its default cancelability state is
PTHREAD_CANCEL_ENABLE. When this routine is called prior to
loading threads, the cancelability state propagates to the
initial thread in the executing program.
Possible Problems When Disabling Cancelability
The most important use of a cancelation request is to ensure that
indefinite wait operations are terminated. For example, a thread
waiting on some network connection, which might take days to
respond (or might never respond), should be made cancelable.
When a thread's cancelability state is disabled, no routine
called within that thread is cancelable. As a result, the user
is unable to cancel the operation. When disabling cancelability,
be sure that no long waits can occur or that it is necessary
for other reasons to defer cancelation requests around that
particular region of code.
4 Return_Values
On successful completion, this routine returns the calling
thread's previous cancelability state in the oldstate argument.
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The specified state is not PTHREAD_CANCEL_ENABLE or
PTHREAD_CANCEL_DISABLE.
4 Associated_Routines
tis_testcancel()
3 tis_setspecific
Changes the value associated with the specified thread-specific
data key.
4 C_Binding
#include <tis.h>
int
tis_setspecific (
pthread_key_t key,
const void *value);
4 Arguments
key
Thread-specific data key that identifies the data to receive
value. Must be obtained from a call to tis_key_create().
value
New value to associate with the specified key. Once set, this
value can be retrieved using the same key in a call to tis_
getspecific().
4 Description
This routine sets the value associated with the specified thread-
specific data key. If a value is defined for the key (that is,
the current value is not NULL), the new value is substituted for
it. The key is obtained by a previous call to tis_key_create().
Do not call this routine from a data destructor function. Doing
so could lead to a memory leak or an infinite loop.
4 Return_Values
If an error condition occurs, this routine returns an integer
indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by key is not a valid key.
[ENOMEM] Insufficient memory to associate the value with the
key.
4 Associated_Routines
tis_getspecific()
tis_key_create()
tis_key_delete()
3 tis_sync
Used as the synchronization point for asynchronous I/O system
services. This routine is for OpenVMS systems only.
4 C_Binding
#include <tis.h>
int
tis_sync (
unsigned long efn,
void *iosb);
4 Arguments
efn
The event flag specified with the OpenVMS system service routine.
iosb
The IOSB specified with the OpenVMS system service routine.
4 Description
When you are performing thread-synchronous "wait-form" system
service calls on OpenVMS such as $QIOW, $ENQW, $GETJPIW, and so
on, you should use this routine and tis_io_complete() with the
asynchronous form of the service (that is, without the "W") and
specify the address of tis_io_complete() as the completion AST
routine (the AST argument, if any, is ignored). The call must
also specify an IOSB (or equivalent, such as an LKSB) and if
possible a unique event flag (see lib$get_ef). Once the library
code is ready to wait for the I/O, it simply calls tis_sync()
(just as if it were calling $SYNC).
4 Return_Values
This routine has the same return values as the OpenVMS $SYNC()
routine.
4 Associated_Routines
tis_io_complete()
3 tis_testcancel
Creates a cancelation point in the calling thread.
4 C_Binding
#include <tis.h>
void
tis_testcancel (void);
4 Arguments
None
4 Description
This routine requests delivery of a pending cancelation request
to the calling thread. Thus, this routine creates a cancelation
point in the calling thread. The cancelation request is delivered
only if a request is pending for the calling thread and the
calling thread's cancelability state is enabled. (A thread
disables delivery of cancelation requests to itself by calling
tis_setcancelstate().)
This routine, when called within very long loops, ensures that a
pending cancelation request is noticed within a reasonable amount
of time.
4 Return_Values
None
4 Associated_Routines
tis_setcancelstate()
3 tis_unlock_global
Unlocks the Threads Library global mutex.
4 C_Binding
#include <tis.h>
int
tis_unlock_global (void);
4 Arguments
None
4 Description
This routine unlocks the global mutex. Because the global mutex
is recursive, the unlock occurs when each call to tis_lock_
global() has been matched by a call to this routine. For example,
if your program called tis_lock_global() three times, tis_unlock_
global() unlocks the global mutex when you call it the third
time.
For more information about actions taken when threads are
present, refer to the pthread_unlock_global_np() description.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EPERM] The global mutex is unlocked or locked by another
thread.
4 Associated_Routines
tis_lock_global()
3 tis_write_lock
Acquires a read-write lock for write access.
4 C_Binding
#include <tis.h>
int
tis_write_lock (
tis_rwlock_t *lock);
4 Arguments
lock
Address of the read-write lock to be acquired for write access.
4 Description
This routine acquires a read-write lock for write access. This
routine waits for any other active locks (for either read or
write access) to be unlocked before this acquisition request is
granted.
This routine returns when the specified read-write lock is
acquired for write access.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by lock is not a valid read-write
lock.
4 Associated_Routines
tis_read_lock()
tis_read_trylock()
tis_read_unlock()
tis_rwlock_destroy()
tis_rwlock_init()
tis_write_trylock()
tis_write_unlock()
3 tis_write_trylock
Attempts to acquire a read-write lock for write access.
4 C_Binding
#include <tis.h>
int
tis_write_trylock (
tis_rwlock_t *lock);
4 Arguments
lock
Address of the read-write lock to be acquired for write access.
4 Description
This routine attempts to acquire a read-write lock for write
access. The routine attempts to immediately acquire the lock.
If the lock is acquired, zero (0) is returned. If the lock is
held by another thread (for either read or write access), [EBUSY]
is returned and the calling thread does not wait for the write-
access lock to be acquired.
Note that it is a coding error to attempt to acquire the lock
for write access if the lock is already held by the calling
thread. (However, this routine returns [EBUSY] anyway, because
no ownership error-checking takes place.)
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion, the lock is acquired for write
access.
[EBUSY] The lock was not acquired for write access, as it is
already held by another thread.
[EINVAL] The value specified by lock is not a valid read-write
lock.
4 Associated_Routines
tis_read_lock()
tis_read_trylock()
tis_read_unlock()
tis_rwlock_destroy()
tis_rwlock_init()
tis_write_lock()
tis_write_unlock()
3 tis_write_unlock
Unlocks a read-write lock that was acquired for write access.
4 C_Binding
#include <tis.h>
int
tis_write_unlock (
tis_rwlock_t *lock);
4 Arguments
lock
Address of the read-write lock to be unlocked.
4 Description
This routine unlocks a read-write lock that was acquired for
write access.
Upon completion of this routine, any thread waiting to acquire
the lock for read access will have those acquisitions granted. If
no threads are waiting to acquire the lock for read access, then
a thread waiting to acquire it for write access will have that
acquisition granted.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type error. Possible return values are as
follows:
Return Description
0 Successful completion.
[EINVAL] The value specified by lock is not a valid read-write
lock.
4 Associated_Routines
tis_read_lock()
tis_read_trylock()
tis_read_unlock()
tis_rwlock_init()
tis_rwlock_destroy()
tis_write_lock()
tis_write_trylock()
3 tis_yield
Notifies the scheduler that the current thread is willing to
release its processor to other threads of the same or higher
priority.
Syntax
tis_yield();
4 C_Binding
int
tis_yield (void);
4 Arguments
None
4 Description
When threads are not present, this routine has no effect.
This routine notifies the thread scheduler that the current
thread is willing to release its processor to other threads of
equivalent or greater scheduling precedence. (A thread generally
will release its processor to a thread of a greater scheduling
precedence without calling this routine.) If no other threads of
equivalent or greater scheduling precedence are ready to execute,
the thread continues.
This routine can allow knowledge of the details of an application
to be used to improve its performance. If a thread does not call
tis_yield(), other threads may be given the opportunity to run
at arbitrary points (possibly even when the interrupted thread
holds a required resource). By making strategic calls to tis_
yield(), other threads can be given the opportunity to run when
the resources are free. This improves performance by reducing
contention for the resource.
As a general guideline, consider calling this routine after a
thread has released a resource (such as a mutex) which is heavily
contended for by other threads. This can be especially important
if the program is running on a uniprocessor machine, or if the
thread acquires and releases the resource inside a tight loop.
Use this routine carefully and sparingly, because misuse can
cause unnecessary context switching that will increase overhead
and actually degrade performance. For example, it is counter-
productive for a thread to yield while it holds a resource that
the threads to which it is yielding will need. Likewise, it is
pointless to yield unless there is likely to be another thread
that is ready to run.
4 Return_Values
If an error condition occurs, this routine returns an integer
value indicating the type of error. Possible return values are as
follows:
Return Description
0 Successful completion.
[ENOSYS] The routine tis_yield() is not supported by this
implementation.