x25 man page on Scientific

Man page or keyword search:  
man Server   26626 pages
apropos Keyword Search (all sections)
Output format
Scientific logo
[printable version]

X25(7)			   Linux Programmer's Manual			X25(7)

NAME
       x25, AF_X25 - ITU-T X.25 / ISO-8208 protocol interface.

SYNOPSIS
       #include <sys/socket.h>
       #include <linux/x25.h>

       x25_socket = socket(AF_X25, SOCK_SEQPACKET, 0);

DESCRIPTION
       X25  sockets  provide  an  interface to the X.25 packet layer protocol.
       This allows applications to communicate over a public X.25 data network
       as  standardized by International Telecommunication Union's recommenda‐
       tion X.25 (X.25 DTE-DCE mode).  X25 sockets can also be used for commu‐
       nication	 without  an  intermediate X.25 network (X.25 DTE-DTE mode) as
       described in ISO-8208.

       Message boundaries are  preserved  —  a	read(2)	 from  a  socket  will
       retrieve	 the  same  chunk  of  data  as	 output with the corresponding
       write(2) to the peer socket.  When necessary, the kernel takes care  of
       segmenting  and re-assembling long messages by means of the X.25 M-bit.
       There is no hard-coded upper limit for the message size.	 However,  re-
       assembling of a long message might fail if there is a temporary lack of
       system resources or when other constraints (such as  socket  memory  or
       buffer size limits) become effective.  If that occurs, the X.25 connec‐
       tion will be reset.

   Socket Addresses
       The AF_X25 socket address family uses the struct sockaddr_x25 for  rep‐
       resenting network addresses as defined in ITU-T recommendation X.121.

	   struct sockaddr_x25 {
	       sa_family_t sx25_family;	   /* must be AF_X25 */
	       x25_address sx25_addr;	   /* X.121 Address */
	   };

       sx25_addr contains a char array x25_addr[] to be interpreted as a null-
       terminated string.  sx25_addr.x25_addr[] consists  of  up  to  15  (not
       counting the terminating 0) ASCII characters forming the X.121 address.
       Only the decimal digit characters from '0' to '9' are allowed.

   Socket Options
       The following X.25-specific socket options can be set by using setsock‐
       opt(2)  and  read  with	getsockopt(2)  with  the level argument set to
       SOL_X25.

       X25_QBITINCL
	      Controls whether the X.25 Q-bit (Qualified Data Bit) is accessi‐
	      ble  by  the user.  It expects an integer argument.  If set to 0
	      (default), the Q-bit is never set for outgoing packets  and  the
	      Q-bit  of	 incoming  packets  is ignored.	 If set to 1, an addi‐
	      tional first byte is prepended to	 each  message	read  from  or
	      written to the socket.  For data read from the socket, a 0 first
	      byte indicates that the Q-bits  of  the  corresponding  incoming
	      data  packets were not set.  A first byte with value 1 indicates
	      that the Q-bit of the corresponding incoming  data  packets  was
	      set.   If	 the first byte of the data written to the socket is 1
	      the Q-bit of the corresponding outgoing  data  packets  will  be
	      set.  If the first byte is 0 the Q-bit will not be set.

VERSIONS
       The AF_X25 protocol family is a new feature of Linux 2.2.

BUGS
       Plenty, as the X.25 PLP implementation is CONFIG_EXPERIMENTAL.

       This man page is incomplete.

       There  is  no  dedicated	 application programmer's header file yet; you
       need to include the kernel header file  <linux/x25.h>.	CONFIG_EXPERI‐
       MENTAL  might  also imply that future versions of the interface are not
       binary compatible.

       X.25 N-Reset events are not propagated to the user process yet.	 Thus,
       if a reset occurred, data might be lost without notice.

SEE ALSO
       socket(2), socket(7)

       Jonathan Simon Naylor: “The Re-Analysis and Re-Implementation of X.25.”
       The URL is
	      ftp://ftp.pspt.fi/pub/ham/linux/ax25/x25doc.tgz

COLOPHON
       This page is part of release 3.22 of the Linux  man-pages  project.   A
       description  of	the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2008-08-08				X25(7)
[top]

List of man pages available for Scientific

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net