wildmidi.cfg man page on Knoppix

Man page or keyword search:  
man Server   3132 pages
apropos Keyword Search (all sections)
Output format
Knoppix logo
[printable version]

wildmidi.cfg(5)		     WildMidi Config File	       wildmidi.cfg(5)

NAME
       wildmidi.cfg - Config file for libWildMidi

LIBRARY
       libWildMidi

DESCRIPTION
       Contains the patch configuration for libWildMidi and location of Gravis
       Ultrasound compatible patch files.

       dir ~/guspats/

       source /etc/wildmidi.cfg

       bank 0
       0 acpiano.pat amp=110 env_time4=300
       1 brpiano.pat amp=100

       drumset 0
       25 snarerol keep=env amp=225 note=60
       26 snap	 note=65

SYNTAX
       guspat_editor_author_cant_read_so_fix_release_time_for_me
	      Some patch file editors switch the 4th and 5th envelopes	around
	      making  the sould play much longer than intended in players that
	      stuck to the Gravis Ultrasound patch  standard.  Including  this
	      option  in the config enables a fix that detects this oversight,
	      playing the sound samples as if they were correct.

	      NOTE: This is a global setting. If it is found  to  affect  good
	      patch  samples  it  will	be  moved  to a per patch setting in a
	      future version.

       auto_amp
	      Forces WildMIDI to amplify samples to their maximum level ignor‐
	      ing the amp=% in the patch lines of the config.

       auto_amp_with_amp
	      Forces  WildMIDI	to amplify samples to their maximum level then
	      apply the amp=% in the patch lines of the config.

       dir dir-name
	      Change the search path for config and patch files	 to  dir-name.
	      This  is	specific to the current config file and carried to any
	      included config file unless they have their own dir setting. Any
	      included	file  that has its own dir setting does not effect the
	      dir setting of the current config file.

       source include-confg
	      Include the settings from include-config. Any patch already  set
	      will be over-ridden by the included config file.

       bank N The  patches  following  this  setting belong to MIDI instrument
	      bank N.

       drumset N
	      The patches following this setting belong to MIDI drum bank N.

       patchno patchfile [amp=volume] [note=miodinte]  [keep=loop]  [keep=env]
       [remove=sustain]		[remove=clamped]	[env_level[0-5]=level]
       [env_time[0-5]=time]

       Example: 0 acpiano.pat amp=110

	      patchno
		     This is the MIDI patch number the instrument belongs to.

	      patchfile
		     The filename of the Gravis Ulstrasound  compatible	 patch
		     file. If the filename is missing the .pat extension, lib‐
		     WildMidi will add .pat when attempting to load the file.

	      amp=volume
		     Force the volume of the samples in this patch  to	volume
		     prior to using it.

	      note=midinote
		     Use note midinote when playing the samples in this patch.
		     NOTE: this is for instruments listed under drumset.

	      keep=loop
		     Play the samples in this patch with the loop,  when  nor‐
		     mally we would not for this instrument.

	      keep=env
		     Use  the  envelope	 data  in this patch, when normally we
		     wouldn't for this instrument.

	      remove=sustain
		     Do note hold the note after the 3rd envelope  until  note
		     off,  which  is what happens if the sustain bit is set in
		     the patch file.

	      remove=clamped
		     Do not jump to 6th envelope on note off,  which  is  what
		     happens if the clamped bit is set in the patch file.

	      env_level[0-5]=level
		     Set  the  envelope level to level with 1.0 being maximum,
		     and 0.0 being minimum.

		     Example:	set   5th   envelope   level	to    10%    -
		     env_level[0-5]=0.1

	      env_time[0-5]=time
		     Set  the  envelope	 time  to  time	 with  a resolution of
		     1/1000th of a second. This setting is the time it	should
		     take for the envelope to reach maximum level.

		     Example: set 1st enevelope time to 1sec - env_time0=1000

		     Example: set 3rd enevelope time to 0.5secs- env_time2=500

       reverb_room_width fval
	      Set  the	room  width for the reverb engine in meters. fval is a
	      float value in meters. Minimum setting is	 1.0  meters,  maximum
	      setting is 100.0 meters, and default is 15.0 meters.

	      Example: set room width to 30 meters - reverb_room_width 30

       reverb_room_length fval
	      Set  the	room length for the reverb engine in meters. fval is a
	      float value in meters. . Minimum setting is 1.0 meters,  maximum
	      setting is 100.0 meters, and default is 20.0 meters.

	      Example: set room length to 40 meters - reverb_room_length 40

SEE ALSO
       WildMidi_GetString(3),	 WildMidi_Init(3),   WildMidi_MasterVolume(3),
       WildMidi_Open(3), WildMidi_OpenBuffer(3), WildMidi_SetOption(3),	 Wild‐
       Midi_GetOutput(3),   WildMidi_GetInfo(3),  WildMidi_FastSeek(3),	 Wild‐
       Midi_Close(3), WildMidi_Shutdown(3), wildmidi(1)

AUTHOR
       Chris Ison <wildcode@users.sourceforge.net>

COPYRIGHT
       Copyright (C) Chris Ison 2001-2010

       This file is part of WildMIDI.

       WildMIDI is free software:  you	can  redistribute  and/or  modify  the
       player  under  the  terms of the GNU General Public License and you can
       redistribute and/or modify the library  under  the  terms  of  the  GNU
       Lesser General Public License as published by the Free Software Founda‐
       tion, either version 3 of the licenses, or(at your  option)  any	 later
       version.

       WildMIDI is distributed in the hope that it will be useful, but WITHOUT
       ANY WARRANTY; without even the implied warranty of  MERCHANTABILITY  or
       FITNESS	FOR  A	PARTICULAR PURPOSE. See the GNU General Public License
       and the GNU Lesser General Public License for more details.

       You should have received a copy of the GNU General Public  License  and
       the  GNU Lesser General Public License along with WildMIDI. If not, see
       <http://www.gnu.org/licenses/>.

       This manpage is licensed under the Creative  Commons  Attribution-Share
       Alike  3.0  Unported  License.  To  view	 a copy of this license, visit
       http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Cre‐
       ative Commons, 171 Second Street, Suite 300, San Francisco, California,
       94105, USA.

				 09 July 2010		       wildmidi.cfg(5)
[top]

List of man pages available for Knoppix

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net