uncompress man page on MirBSD

Man page or keyword search:  
man Server   6113 pages
apropos Keyword Search (all sections)
Output format
MirBSD logo
[printable version]

COMPRESS(1)		     BSD Reference Manual		   COMPRESS(1)

NAME
     compress, uncompress, zcat - compress and expand data (compress mode)

SYNOPSIS
     compress [-123456789cdfghLlNnOqrtVv] [-b bits] [-o filename] [-S suffix]
	      [file ...]
     uncompress [-cfhlNnqrtv] [-o filename] [file ...]
     zcat [-fghqr] [file ...]

DESCRIPTION
     The compress utility reduces the size of the named files using adaptive
     Lempel-Ziv coding, in compress mode. If invoked as compress -g, the de-
     flate mode of compression is chosen; see gzip(1) for more information.
     Each file is renamed to the same name plus the extension ".Z". As many of
     the modification time, access time, file flags, file mode, user ID, and
     group ID as allowed by permissions are retained in the new file. If
     compression would not reduce the size of a file, the file is ignored (un-
     less -f is used).

     The uncompress utility restores compressed files to their original form,
     renaming the files by removing the extension (or by using the stored name
     if the -N flag is specified). It has the ability to restore files
     compressed by both compress and gzip(1), recognising the following exten-
     sions: ".Z", "-Z", "_Z", ".gz", "-gz", "_gz", ".cgz", "-cgz", "_cgz",
     ".ngz", "-ngz", "_ngz", ".tgz", "-tgz", "_tgz", ".taz", "-taz", and
     "_taz". Extensions ending in "tgz" and "taz" are not removed when
     decompressing, instead they are converted to "tar". The same goes for
     "cgz" and "ngz" files, which are converted to "cpio".

     The zcat command is equivalent in functionality to uncompress -c.

     If renaming the files would cause files to be overwritten and the stan-
     dard input device is a terminal, the user is prompted (on the standard
     error output) for confirmation. If prompting is not possible or confirma-
     tion is not received, the files are not overwritten.

     If no files are specified, the standard input is compressed or un-
     compressed to the standard output. If either the input or output files
     are not regular files, the checks for reduction in size and file
     overwriting are not performed, the input file is not removed, and the at-
     tributes of the input file are not retained.

     By default, when compressing using the deflate scheme (-g), the original
     file name and time stamp are stored in the compressed file. When un-
     compressing, this information is not used. Instead, the uncompressed file
     inherits the time stamp of the compressed version and the uncompressed
     file name is generated from the name of the compressed file as described
     above. These defaults may be overridden by the -N and -n flags, described
     below.

     The options are as follows:

     -1...9  Use the deflate scheme, with compression factor of -1 to -9.
	     Compression factor -1 is the fastest, but provides a poorer level
	     of compression. Compression factor -9 provides the best level of
	     compression, but is relatively slow. The default is -6. This op-
	     tion implies -g.

     -b bits
	     Specify the bits code limit (see below).

     -c	     Compressed or uncompressed output is written to the standard out-
	     put. No files are modified (force zcat mode).

     -d	     Decompress the source files instead of compressing them (force
	     uncompress mode).

     -f	     Force compression of file, even if it is not actually reduced in
	     size. Additionally, files are overwritten without prompting for
	     confirmation. If the input data is not in a format recognised by
	     compress and if the options -cd are also given, copy the input
	     data without change to the standard output: let zcat behave as
	     cat(1).

	     This option also turns off ignoring files based on their suffix.

     -g	     Use the deflate scheme, which reportedly provides better compres-
	     sion rates (force gzip(1) mode).

     -h	     Print a short help message.

     -L	     Print the licence.

     -l	     List information for the specified compressed files. The follow-
	     ing information is listed:

	     compressed size	Size of the compressed file.

	     uncompressed size	Size of the file when uncompressed.

	     compression ratio	Ratio of the difference between the compressed
				and uncompressed sizes to the uncompressed
				size.

	     uncompressed name	Name the file will be saved as when un-
				compressing.

	     If the -v option is specified, the following additional informa-
	     tion is printed:

	     compression method	 Name of the method used to compress the file.

	     crc		 32-bit CRC (cyclic redundancy code) of the
				 uncompressed file.

	     time stamp		 Date and time corresponding to the last data
				 modification time (mtime) of the compressed
				 file (if the -n option is specified, the time
				 stamp stored in the compressed file is print-
				 ed instead).

     -N	     When uncompressing or listing, use the time stamp and file name
	     stored in the compressed file, if any, for the uncompressed ver-
	     sion. This information is only available when the deflate scheme
	     (-g) is used.

     -n	     When compressing, do not store the original file name and time
	     stamp in the header of the compressed file.

     -O	     Use compress mode (the default).

     -o filename
	     Set the output file name.

     -q	     Be quiet: suppress all messages.

     -r	     Recursive mode: compress will descend into specified directories.

     -S suffix
	     Set the suffix for compressed files.

     -t	     Test the integrity of each file leaving any files intact.

     -V	     Display the programme version and exit.

     -v	     Print the percentage reduction of each file and other informa-
	     tion.

     compress uses a modified Lempel-Ziv algorithm (LZW). Common substrings in
     the file are first replaced by 9-bit codes 257 and up. When code 512 is
     reached, the algorithm switches to 10-bit codes and continues to use more
     bits until the limit specified by the -b flag is reached. bits must be
     between 9 and 16 (the default is 16).

     After the bits limit is reached, compress periodically checks the
     compression ratio. If it is increasing, compress continues to use the ex-
     isting code dictionary. However, if the compression ratio decreases,
     compress discards the table of substrings and rebuilds it from scratch.
     This allows the algorithm to adapt to the next "block" of the file.

     The -b flag is omitted for uncompress since the bits parameter specified
     during compression is encoded within the output, along with a magic
     number to ensure that neither decompression of random data nor recompres-
     sion of compressed data is attempted.

     The amount of compression obtained depends on the size of the input, the
     number of bits per code, and the distribution of common substrings. Typi-
     cally, text such as source code or English is reduced by 50 - 60% using
     compress. Compression is generally much better than that achieved by
     Huffman coding (as used in the historical command pack), or adaptive
     Huffman coding (as used in the historical command compact), and takes
     less time to compute.

     The compress, uncompress, and zcat utilities exit with 0 on success; 1 if
     an error occurred; or 2 if a warning occurred.

SEE ALSO
     cpio(1), gzexe(1), gzip(1), zdiff(1), zforce(1), zmore(1), znew(1),
     compress(3)

     Welch, Terry A., "A Technique for High Performance Data Compression",
     IEEE Computer, 17:6, pp. 8-19, June, 1984.

STANDARDS
     The compress utility is compliant with the IEEE Std 1003.2-1992 ("PO-
     SIX.2") specification.

HISTORY
     The compress command appeared in 4.3BSD. Deflate compression support was
     added in OpenBSD 2.1. The cpio handling was added in MirOS #8.

MirOS BSD #10-current		April 29, 2007				     2
[top]

List of man pages available for MirBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net