UCF(1) Debian GNU/Linux manual UCF(1)NAMEucf - Update Configuration File: preserve user changes in configura‐
tion files
SYNOPSISucf [options] <New File> <Destination>
ucf [options] --purge <Destination>
DESCRIPTION
This utility provides a means of asking the user whether or not to
accept new versions of configuration files provided by the package
maintainer, with various heuristics designed to minimize interaction
time. It uses debconf to interact with the user, as per Debian policy.
In the SYNOPSIS above, New file is the configuration file as provided
by the package (either shipped with the package, or generated by the
maintainer scripts on the fly), and Destination is the location (usu‐
ally under /etc) where the real configuration file lives, and is poten‐
tially modified by the end user. Since the files edited would be real
files, and not symbolic links, ucf follows and resolves symbolic links
before acting. As far as possible, ucf attempts to preserve the owner‐
ship and permission of the New file as it is copied to the new loca‐
tion.
This script attempts to provide conffile like handling for files
installed under /etc not shipped in a Debian package, but handled by
the postinst instead. Debian policy states that files under /etc which
are configuration files must preserve user changes, and this applies to
files handled by maintainer scripts as well. Using ucf, one may ship a
bunch of default configuration files somewhere in /usr (
/usr/share/<pkg> is a good location), and maintain files in /etc, pre‐
serving user changes and in general offering the same facilities while
upgrading that dpkg normally provides for “conffiles”
Additionally, this script provides facilities for transitioning a file
that had not been provided conffile like protection to come under this
schema, and attempts to minimize questions asked at install time.
Indeed, the transitioning facility is better than the one offered by
dpkg while transitioning a file from a non-conffile to conffile status.
The second form in the SYNOPSIS above is for purging information about
the configuration file when the package is purged; and is critical for
allowing smooth reinstallations.
During the course of operations, when working with configuration files,
ucf optionally creates copies of versions of the configuration file in
question. For example, a file with the suffix ucf-old holds the old
version of a configuration file replaced by ucf. Also, copies of the
configuration file with the suffixes ucf-new and ucf-dist may be cre‐
ated; and the maintainer scripts should consider purging copies of the
configuration file with these extensions during purge.
OPTIONS-h, --help
Print a short usage message
-n, --no-action
Dry run. Print the actions that would be taken if the script is
invoked, but take no action.
-d[n], --debug=[n]
Set the debug level to the (optional) level n (n defaults to 1).
Please note there must be no spaces before the optional digit n.
This turns on copious debugging information.
-p, --purge
Removes all vestiges of the file from the state hashfile. This
is required to allow a package to be reinstalled after it is
purged; since otherwise, the real configuration file is removed,
but it remains in the hash file; and on reinstall no action is
taken, since the md5sum of the new file matches that in the
hashfile. In short, remember to use this option in the postrm
for every configuration file managed by ucf when the package is
being purged (assuming ucf itself exists). Note: ucf does not
actually touch the file on disk in this operation, so any file
removals are still the responsibility of the calling package.
-v, --verbose
Make the script be very verbose about setting internal vari‐
ables.
-s foo, --src-dir foo
Set the source directory (historical md5sums are expected to
live in files and sub directories of this directory) to foo. By
default, the directory the new_file lives in is assumed to be
the source directory. Setting this option overrides settings in
the environment variable UCF_SOURCE_DIR, and in the configura‐
tion file variable conf_source_dir.
--sum-file foo
Force the historical md5sums to be read from this file, rather
than defaulting to living in the source directory. Setting this
option overrides settings in the environment variable
UCF_OLD_MDSUM_FILE, and in the configuration file variable
conf_old_mdsum_file.
--three-way
This turns on the option, during installation, for the user to
be offered a chance to see a merge of the changes between old
maintainer version and the new maintainer version into the local
copy of the configuration file. If the user likes what they see,
they can ask to have these changes merged in. This allows one to
get new upstream changes merged in even while retaining local
modifications to the configuration file. This is accomplished by
taking the configuration file and stashing it in a cache area
during registration, and using diff3 during the install (the
stashed file name is a munged version of the full path of the
configuration file to avoid name space clashes). Note This
option appeared in Version 0.8 of ucf, which was the first ver‐
sion released into unstable and ultimately Sarge. The version
of ucf in woody does not contain this option.
--debconf-ok
Indicate that it is ok for ucf to use an already running debconf
instance for prompting (it has always been ok to use ucf when
debconf is not running -- it shall invoke debconf as needed).
Since historically maintainer scripts that used debconf and also
ucf had to disable/cripple debconf before running ucf (since ucf
did not prompt with debconf, and needed stdio available), ucf
must be cautious when called from a maintainer script that uses
debconf. This option lets it know that the maintainer script has
not told debconf to stop, or redirected its stdio from debconf,
or anything of the sort -- and thus it is safe to use debconf
even when the script discovers that debconf is running. Pack‐
ages that call ucf with this option should take care to depend
on version 0.28 or higher of ucf (the first to support use this
option).
--debconf-template foo
Instruct ucf to use the named multiselect debconf template
instead of the normal ucf-provided debconf template. The caller
is responsible for ensuring that the named template exists and
has a list of choices matching those for the default ucf tem‐
plate, and should set Choices-C: ${CHOICES} to ensure the
returned values match those from the default template. Note
that the choices must be different according to whether the
--three-way option is also set.
--state-dir /path/to/dir
Set the state directory to /path/to/dir instead of the default
/var/lib/ucf. Used mostly for testing.
USAGE
The most common case usage is pretty simple: a single line invocation
in the postinst on configure, and another single line in the postrm to
tell ucf to forget about the configuration file on purge (using the
--purge option) is all that is needed (assuming ucf is still on the
system).
It is recommended that you also register any file being managed by ucf
with the ucf registry; this associates the configuration file with the
package it belongs to. This is done with a simple call to ucfr. Users
may then query the association between a configuration file and the
package using the tool ucfq. Please see the appropriate manual pages
for details.
If a file maintained by maintainer scripts is being transitioned from
an unprotected status to the protection afforded by the script, the
maintainer can help ease the transition by reducing the questions that
may be asked at installation time. Specifically, questions should not
be asked if the file in question is an unmodified version that was one
shipped in a previous version of this package; and the maintainer can
help by telling the script about the historical md5sums that published
versions of this file contained.
The way to do this is to either create a file called <New file>.md5sum,
with one md5sum on each line, (the file names you use are ignored,
except for the entry named default), or create a directory, called <New
file>.md5sum.d, which should contain any number of files, each contain‐
ing a single line, namely, the md5sum of a previous version of <New
file>. The names of these files are not important, with one exception:
The file called default is treated specially. For example, the author
personally uses either package version numbers or release code names,
like 7.6.3, or potato. If none of the historical md5sums match, we are
almost certain that either the historical record of md5sums is not com‐
plete, or the user has changed the configuration file.
The default historical md5sum
The exception to the rule about names mentioned earlier is that if no
md5sums match, and if the file <New file>.md5sum.d/default exists, or
if there is a line corresponding to a default file in <New
file>.md5sum, it shall be used as the default md5sum of the previous
version of the package assumed to have been installed on this machine.
As you can see, unless there are limited number of previously released
packages (like just one), the maintainer is also making an informed
guess, but the option is provided to the maintainer.
If the file <New file>.md5sum, or the directory <New file>.md5sum.d
does not exist, or none of the md5sums match, we test the installed
<Destination> file to see whether it is the same as the <New file>. If
not, we ask the user whether they want us to replace the file.
An additional facility is also offered: optionally, ucf can store one
old version of the maintainers copy of the configuration file, and, on
upgrade, calculate the changes made in the maintainers version of the
configuration file, and apply that patch to the local version of the
file (on user request, of course). There is also a preview facility
where the user can inspect the results of such a merge, before asking
the action to be taken.
ENVIRONMENT VARIABLES
The variable UCF_FORCE_CONFFNEW, if set, forces the new file to always
overwrite the installed destination file, while the variable
UCF_FORCE_CONFFOLD, if set silently retains the installed file.
UCF_FORCE_CONFFMISS is only applicable when the installed destination
file does not exist (perhaps due to user removal),and forces ucf to
recreate the missing file (the default behaviour is to honor the users
wishes and not recreate the locally deleted file).
FILES
This script creates the file new_file.md5sum, and it may copy the file
(presumably shipped with the package) <New file> to its destination,
<Destination>.
/var/lib/ucf/hashfile, and /var/lib/ucf/hashfile.X, where X is a small
integer, where previous versions of the hashfile are stored.
/etc/ucf.conf
EXAMPLES
If the package foo wants to use ucf to handle user interaction for con‐
figuration file foo.conf, a version of which is provided in the package
as /usr/share/foo/configuration, a simple invocation of ucf in the post
inst file is all that is needed:
ucf /usr/share/foo/configuration /etc/foo.conf
On purge, one should tell ucf to forget about the file (see detailed
examples in /usr/share/doc/ucf/examples):
ucf--purge /etc/foo.conf Please note that purge can also be used to
make ucf forget the previous state of the files, and when the package
is next installed or updated, ucf will ask the user to replace the cur‐
rent cofiguration file. Do this if you want to change your decision to
not update to a maintainer provided version of the configuration file.
The motivation for this script was to provide conffile like handling
for start files for emacs lisp packages (for example,
/etc/emacs21/site-start.d/50psgml-init.el ) These start files are not
shipped with the package, instead, they are installed during the post
installation configuration phase by the script /usr/lib/emacsen-com‐
mon/emacs-package-install $package_name.
This script is meant to be invoked by the packages install script at
/usr/lib/emacsen-common/packages/install/$package_name for each flavour
of installed emacsen by calling it with the proper values of new file (
/usr/share/emacs/site-lisp/<pkg>/<pkg-init.el ), and dest file (
/etc/emacs21/site-start.d/50<pkg-init.el ), and it should do the rest.
SEE ALSOucf.conf(5), ucfr(1), ucfq(1), and diff3(1). The Debian Emacs policy,
shipped with the package emacsen-common.
AUTHOR
This manual page was written Manoj Srivastava <srivasta@debian.org>,
for the Debian GNU/Linux system.
Debian May 30 2008 UCF(1)
