timer_settime man page on Scientific

Man page or keyword search:  
man Server   26626 pages
apropos Keyword Search (all sections)
Output format
Scientific logo
[printable version]

TIMER_SETTIME(2)	   Linux Programmer's Manual	      TIMER_SETTIME(2)

NAME
       timer_settime, timer_gettime - arm/disarm and fetch state of POSIX per-
       process timer

SYNOPSIS
       #include <time.h>

       int timer_settime(timer_t timerid, int flags,
			 const struct itimerspec *new_value,
			 struct itimerspec * old_value);
       int timer_gettime(timer_t timerid, struct itimerspec *curr_value);

       Link with -lrt.

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       timer_settime(), timer_gettime(): _POSIX_C_SOURCE >= 199309

DESCRIPTION
       timer_settime() arms or disarms the timer identified by	timerid.   The
       new_value  argument  is	an itimerspec structure that specifies the new
       initial value and the new  interval  for	 the  timer.   The  itimerspec
       structure is defined as follows:

	   struct timespec {
	       time_t tv_sec;		     /* Seconds */
	       long   tv_nsec;		     /* Nanoseconds */
	   };

	   struct itimerspec {
	       struct timespec it_interval;  /* Timer interval */
	       struct timespec it_value;     /* Initial expiration */
	   };

       Each  of	 the  substructures  of the itimerspec structure is a timespec
       structure that allows a time value  to  be  specified  in  seconds  and
       nanoseconds.   These  time  values  are measured according to the clock
       that was specified when the timer was created by timer_create()

       If new_value->it_value specifies a non-zero value  (i.e.,  either  sub‐
       field  is non-zero), then timer_settime() arms (starts) the timer, set‐
       ting it to initially expire at the  given  time.	  (If  the  timer  was
       already	armed,	then  the  previous  settings  are  overwritten.)   If
       new_value->it_value specifies a zero value (i.e.,  both	subfields  are
       zero), then the timer is disarmed.

       The  new_value->it_interval field specifies the period of the timer, in
       seconds and nanoseconds.	 If this field is  non-zero,  then  each  time
       that an armed timer expires, the timer is reloaded from the value spec‐
       ified in new_value->it_interval.	 If new_value->it_interval specifies a
       zero  value  then the timer expires just once, at the time specified by
       it_value.

       By   default,   the    initial	 expiration    time    specified    in
       new_value->it_value  is interpreted relative to the current time on the
       timer's clock at the time of the call.  This can be modified by	speci‐
       fying  TIMER_ABSTIME  in	 flags,	 in  which case new_value->it_value is
       interpreted as an absolute value as measured on the timer's clock; that
       is, the timer will expire when the clock value reaches the value speci‐
       fied by	new_value->it_value.   If  the	specified  absolute  time  has
       already	passed,	 then  the  timer expires immediately, and the overrun
       count (see timer_getoverrun(2)) will be set correctly.

       If the value of the CLOCK_REALTIME clock is adjusted while an  absolute
       timer  based  on	 that clock is armed, then the expiration of the timer
       will be appropriately  adjusted.	  Adjustments  to  the	CLOCK_REALTIME
       clock have no effect on relative timers based on that clock.

       If  old_value is not NULL, then it returns the previous interval of the
       timer (in old_value->it_interval) and the  amount  of  time  until  the
       timer would previously have next expired (in old_value->it_value).

       timer_gettime()	returns	 the  time  until next expiration, and the the
       interval, for the timer specified by timerid, in the buffer pointed  to
       by  curr_value.	 The time remaining until the next timer expiration is
       returned in curr_value.it_value;	 this  is  always  a  relative	value,
       regardless  of  whether the TIMER_ABSTIME flag was used when arming the
       timer.  If the value returned in curr_value.it_value is zero, then  the
       timer  is  currently  disarmed.	 The  timer  interval  is  returned in
       curr_value.it_interval.	If the value returned in  curr_value.it_inter‐
       val is zero, then this is a "one-shot" timer.

RETURN VALUE
       On success, timer_settime() and timer_gettime() return 0.  On error, -1
       is returned, and errno is set to indicate the error.

ERRORS
       These functions may fail with the following errors:

       EFAULT new_value, old_value, or curr_value is not valid a pointer.

       EINVAL timerid is invalid.

       timer_settime() may fail with the following errors:

       EINVAL new_value.it_value is negative; or new_value.it_value.tv_nsec is
	      negative or greater than 999,999,999.

VERSIONS
       These system calls are available since Linux 2.6.

CONFORMING TO
       POSIX.1-2001

EXAMPLE
       See timer_create(2).

SEE ALSO
       timer_create(2), timer_settime(2), timer_getoverrun(2), time(7)

COLOPHON
       This  page  is  part of release 3.22 of the Linux man-pages project.  A
       description of the project, and information about reporting  bugs,  can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2009-02-20		      TIMER_SETTIME(2)
[top]

List of man pages available for Scientific

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net