tie(3tcl) Tcl Data Structures tie(3tcl)______________________________________________________________________________NAMEtie - Array persistence
SYNOPSIS
package require Tcl 8.4
package require tie ?1.1?
::tie::tie arrayvarname options... dstype dsname...
::tie::untie arrayvarname ?token?
::tie::info ties arrayvarname
::tie::info types
::tie::info type dstype
::tie::register dsclasscmd as dstype
dsclasscmd objname ?dsname...?
ds destroy
ds names
ds size
ds get
ds set dict
ds unset ?pattern?
ds setv index value
ds unsetv index
ds getv index
_________________________________________________________________DESCRIPTION
The tie package provides a framework for the creation of persistent Tcl
array variables. It should be noted that the provided mechanism is
generic enough to also allow its usage for the distribution of the con‐
tents of Tcl arrays over multiple threads and processes, i.e. communi‐
cation.
This, persistence and communication, is accomplished by tying) a Tcl
array variable to a data source. Examples of data sources are other Tcl
arrays and files.
It should be noted that a single Tcl array variable can be tied to more
than one data source. It is this feature which allows the framework to
be used for communication as well. Just tie several Tcl arrays in many
client processes to a Tcl array in a server and all changes to any of
them will be distributed to all. Less centralized variants of this are
of course possible as well.
USING TIES
TIE API
This section describes the basic API used to establish and remove ties
between Tcl array variables and data sources. This interface is the
only one a casual user has to be concerned about. The following sec‐
tions about the various internal interfaces can be safely skipped.
::tie::tie arrayvarname options... dstype dsname...
This command establishes a tie between the Tcl array whose name
is provided by the argument arrayvarname and the data source
identified by the dstype and its series of dsname arguments. All
changes made to the Tcl array after this command returns will be
saved to the data source for safekeeping (or distribution).
The result of the command is always a token which identifies the
new tie. This token can be used later to destroy this specific
tie.
varname arrayvarname (in)
The name of the Tcl array variable to connect the new tie
to.
name|command dstype (in)
This argument specifies the type of the data source we
wish to access. The dstype can be one of log, array,
remotearray, file, growfile, or dsource; in addition, the
programmer can register additional data source types.
Each dstype is followed by one or more arguments that
identify the data source to which the array is to be
tied.
string dsname (in)
The series of dsname arguments coming after the dstype
identifies the data source we wish to connect to, and has
to be appropriate for the chosen type.
The command understands a number of additional options which guide the
process of setting up the connection between Tcl array and data source.
-open The Tcl array for the new tie is loaded from the data
source, and the previously existing contents of the Tcl
array are erased. Care is taken to not erase the previous
contents should the creation of the tie fail.
This option and the option -save exclude each other. If
neither this nor option -save are specified then this
option is assumed as default.
-save The Tcl array for the new tie is saved to the data
source, and the previously existing contents of the data
source are erased.
This option and the option -open exclude each other. If
neither this nor option -open are specified then option
-open is assumed as default.
-merge Using this option prevents the erasure of any previously
existing content and merges the data instead. It can be
specified in conjunction with either -open or -save. They
determine how data existing in both Tcl array and data
source, i.e duplicates, are dealt with.
When used with -open data in the data source has prece‐
dence. In other words, for duplicates the data in the
data source is loaded into the Tcl array.
When used with -save data in the Tcl array has prece‐
dence. In other words, for duplicates the data in the Tcl
array is saved into the data source.
::tie::untie arrayvarname ?token?
This command dissolves one or more ties associated with the Tcl
array named by arrayvarname. If no token is specified then all
ties to that Tcl array are dissolved. Otherwise only the tie the
token stands for is removed, if it is actually connected to the
array. Trying to remove a specific tie not belonging to the pro‐
vided array will cause an error.
It should be noted that while severing a tie will destroy man‐
agement information internal to the package the data source
which was handled by the tie will not be touched, only closed.
After the command returns none of changes made to the array will
be saved to the data source anymore.
The result of the command is an empty string.
varname arrayname (in)
The name of a Tcl array variable which may have ties.
handle token (in)
A handle representing a specific tie. This argument is
optional.
::tie::info ties arrayvarname
This command returns a list of ties associated with the Tcl
array variable named by arrayvarname. The result list will be
empty if the variable has no ties associated with it.
::tie::info types
This command returns a dictionary of registered types, and the
class commands they are associated with.
::tie::info type dstype
This command returns the fully resolved class command for a type
name. This means that the command will follow a chain of type
definitions ot its end.
STANDARD DATA SOURCE TYPES
This package provides the six following types as examples and standard
data sources.
log This data source does not maintain any actual data, nor persis‐
tence. It does not accept any identifying arguments. All changes
are simply logged to stdout.
array This data source uses a regular Tcl array as the origin of the
persistent data. It accepts a single identifying argument, the
name of this Tcl array. All changes are mirrored to that array.
remotearray
This data source is similar to array. The difference is that the
Tcl array to which we are mirroring is not directly accessible,
but through a send-like command.
It accepts three identifying arguments, the name of the other
Tcl array, the command prefix for the send-like accessor com‐
mand, and an identifier for the remote entity hosting the array,
in this order. All changes are mirrored to that array, via the
command prefix. All commands will be executed in the context of
the global namespace.
send-like means that the command prefix has to have send syntax
and semantics. I.e. it is a channel over which we can send arbi‐
trary commands to some other entity. The remote array data
source however uses only the commands set, unset, array exists,
array names, array set, and array get to retrieve and set values
in the remote array.
The command prefix and the entity id are separate to allow the
data source to use options like -async when assembling the
actual commands.
Examples of command prefixes, listed with the id of the remote
entity, without options. In reality only the part before the id
is the command prefix:
send tkname
The Tcl array is in a remote interpreter and is accessed
via Tk's X communication.
comm::comm send hostportid
The Tcl array is in a remote interpreter and is accessed
through a socket.
thread::send threadid
The Tcl array is in a remote interpreter in a different
thread of this process.
file This data source uses a single file as origin of the persistent
data. It accepts a single identifying argument, the path to this
file. The file has to be both readable and writable. It may not
exist, the data source will create it in that case. This (and
only this) situation will require that the directory for the
file exists and is writable as well.
All changes are saved in the file, as proper Tcl commands, one
command per operation. In other words, the file will always con‐
tain a proper Tcl script.
If the file exists when the tie using it is set up, then it will
be compacted, i.e. superfluous operations are removed, if the
operations log stored in it contains either at least one opera‐
tion clearing the whole array, or at least 1.5 times more opera‐
tions than entries in the loaded array.
growfile
This data source is like file in terms of the storage medium for
the array data, and how it is configured. In constrast to the
former it however assumes and ensures that the tied array will
never shrink. I.e. the creation of new array entries, and the
modification of existing entries is allowed, but the deletion of
entries is not, and causes the data source to throw errors.
This restriction allows us to simplify both file format and
access to the file radically. For one, the file is read only
once and the internal cache cannot be invalidated. Second, writ‐
ing data is reduced to a simple append, and no compaction step
is necessary. The format of the contents is the string represen‐
tation of a dictionary which can be incrementally extended for‐
ever at the end.
dsource
This data source uses an explicitly specified data source object
as the source for the persistent data. It accepts a single iden‐
tifying argument, the command prefix, i.e. object command.
To use this type it is necessary to know how the framework man‐
ages ties and what data source objects are.
All changes are delegated to the specified object.
CREATING NEW DATA SOURCES
This section is of no interest to the casual user of ties. Only devel‐
opers wishing to create new data sources have to know the information
provided herein.
DATA SOURCE OBJECTS
All ties are represented internally by an in-memory object which medi‐
ates between the tie framework and the specific data source, like an
array, file, etc. This is the data source object.
Its class, the data source class is not generic, but specific to the
type of the data source. Writing a new data source requires us to write
such a class, and then registering it with the framework as a new type.
The following subsections describe the various APIs a data source class
and the objects it generates will have to follow to be compatible with
the tie framework.
Data source objects are normally automatically created and destroyed by
the framework when a tie is created, or removed. This management can be
explicitly bypassed through the usage of the "dsource" type. The data
source for this type is a data source object itself, and this object is
outside of the scope of the tie framework and not managed by it. In
other words, this type allows the creation of ties which talk to pre-
existing data source objects, and these objects will survive the
removal of the ties using them as well.
REGISTERING A NEW DATA SOURCE CLASS
After a data source class has been written it is necessary to register
it as a new type with the framework.
::tie::register dsclasscmd as dstype
Using this command causes the tie framework to remember the
class command dsclasscmd of a data source class under the type
name dstype.
After the call the argument dstype of the basic user command
::tie::tie will accept dstype as a type name and translate it
internally to the appropriate class command for the creation of
data source objects for the new data source.
DATA SOURCE CLASS
Each data source class is represented by a single command, also called
the class command, or object creation command. Its syntax is
dsclasscmd objname ?dsname...?
The first argument of the class command is the name of the data
source object to create. The framework itself will always sup‐
ply the string %AUTO%, to signal that the class command has to
generate not only the object, but the object name as well.
This is followed by a series of arguments identifying the data
source the new object is for. These are the same dsname argu‐
ments which are given to the basic user command ::tie::tie.
Their actual meaning is dependent on the data source class.
The result of the class command has to be the fully-qualified
name of the new data source object, i.e. the name of the object
command. The interface this command has to follow is described
in the section DATA SOURCE OBJECT API
DATA SOURCE OBJECT API
Please read the section DATA SOURCE CLASS first, to know how to gener‐
ate new object commands.
Each object command for a data source object has to provide at least
the methods listed below for proper inter-operation with the tie frame‐
work. Note that the names of most of the methods match the subcommands
of the builtin array command.
ds destroy
This method is called when the object ds is destroyed. It now
has to release all its internal resources associated with the
external data source.
ds names
This command has to return a list containing the names of all
keys found in the data source the object talks to. This is
equivalent to array names.
ds size
This command has to return an integer number specifying the num‐
ber of keys found in the data source the object talks to. This
is equivalent to array size.
ds get This command has to return a dictionary containing the data
found in the data source the object talks to. This is equivalent
to array get.
ds set dict
This command takes a dictionary and adds its contents to the
data source the object talks to. This is equivalent to array
set.
ds unset ?pattern?
This command takes a pattern and removes all elements whose keys
matching it from the data source. If no pattern is specified it
defaults to *, causing the removal of all elements. This is
nearly equivalent to array unset.
ds setv index value
This command has to save the value in the data source the object
talks to, under the key index.
The result of the command is ignored. If an error is thrown then
this error will show up as error of the set operation which
caused the method call.
ds unsetv index
This command has to remove the value under the key index from
the data source the object talks to.
The result of the command is ignored. If an error is thrown then
this error will show up as error of the unset operation which
caused the method call.
ds getv index
This command has to return the value for the key index in the
data source the object talks to.
And here a small table comparing the data source methods to the regular
Tcl commands for accessing an array.
Regular Tcl Data source
----------------------
array names a ds names
array size a ds size
array get a ds get
array set a dict ds set dict
array unset a pattern ds unset ?pattern?
----------------------
set a($idx) $val ds setv idx val
unset a($idx) ds unsetv idx
$a($idx) ds getv idx
----------------------
BUGS, IDEAS, FEEDBACK
This document, and the package it describes, will undoubtedly contain
bugs and other problems. Please report such in the category tie of the
Tcllib SF Trackers [http://sourceforge.net/tracker/?group_id=12883].
Please also report any ideas for enhancements you may have for either
package and/or documentation.
KEYWORDS
array, database, file, metakit, persistence, tie, untie
CATEGORY
Programming tools
COPYRIGHT
Copyright (c) 2004-2008 Andreas Kupries <andreas_kupries@users.sourceforge.net>
tie 1.1 tie(3tcl)
