term man page on OpenMandriva

Man page or keyword search:  
man Server   8135 pages
apropos Keyword Search (all sections)
Output format
OpenMandriva logo
[printable version]

term(5)								       term(5)

NAME
       term - format of compiled term file.

SYNOPSIS
       term

DESCRIPTION
   STORAGE LOCATION
       Compiled	  terminfo   descriptions   are	 placed	 under	the  directory
       /usr/share/terminfo.  Two configurations are supported  (when  building
       the ncurses libraries):

       directory tree
	    A two-level scheme is used to avoid a linear search of a huge UNIX
	    system directory: /usr/share/terminfo/c/name  where	 name  is  the
	    name of the terminal, and c is the first character of name.	 Thus,
	    act4 can be found in the  file  /usr/share/terminfo/a/act4.	  Syn‐
	    onyms  for	the same terminal are implemented by multiple links to
	    the same compiled file.

       hashed database
	    Using Berkeley database, two types of records are stored: the ter‐
	    minfo  data	 in the same format as stored in a directory tree with
	    the terminfo's primary name as a key, and records containing  only
	    aliases pointing to the primary name.

	    If	built  to  write hashed databases, ncurses can still read ter‐
	    minfo databases organized as a directory tree,  but	 cannot	 write
	    entries  into  the	directory  tree.   It  can  write (or rewrite)
	    entries in the hashed database.

	    ncurses distinguishes the two  cases  in  the  TERMINFO  and  TER‐
	    MINFO_DIRS	environment  variable by assuming a directory tree for
	    entries that correspond to an existing directory, and hashed data‐
	    base otherwise.

   STORAGE FORMAT
       The format has been chosen so that it will be the same on all hardware.
       An 8 or more bit byte is assumed, but no assumptions about byte	order‐
       ing or sign extension are made.

       The compiled file is created with the tic program, and read by the rou‐
       tine setupterm.	The file is divided into six parts: the header, termi‐
       nal names, boolean flags, numbers, strings, and string table.

       The  header  section  begins the file.  This section contains six short
       integers in the format described below.	These integers are

	    (1) the magic number (octal 0432);

	    (2) the size, in bytes, of the names section;

	    (3) the number of bytes in the boolean section;

	    (4) the number of short integers in the numbers section;

	    (5) the number of offsets (short integers) in the strings section;

	    (6) the size, in bytes, of the string table.

       Short integers are stored in two 8-bit bytes.  The first byte  contains
       the least significant 8 bits of the value, and the second byte contains
       the most significant 8 bits.  (Thus, the value represented is  256*sec‐
       ond+first.)   The  value -1 is represented by the two bytes 0377, 0377;
       other negative values are illegal. This value generally means that  the
       corresponding capability is missing from this terminal.	Note that this
       format corresponds to the hardware of the VAX and PDP-11 (that is, lit‐
       tle-endian  machines).	Machines where this does not correspond to the
       hardware must read the integers as two bytes and	 compute  the  little-
       endian value.

       The  terminal  names section comes next.	 It contains the first line of
       the terminfo description, listing the various names for	the  terminal,
       separated  by  the  `|'	character.   The section is terminated with an
       ASCII NUL character.

       The boolean flags have one byte for each flag.  This byte is  either  0
       or  1  as  the  flag is present or absent.  The capabilities are in the
       same order as the file <term.h>.

       Between the boolean section and the number section, a null byte will be
       inserted,  if necessary, to ensure that the number section begins on an
       even byte (this is a relic of the PDP-11's word-addressed architecture,
       originally  designed in to avoid IOT traps induced by addressing a word
       on an odd byte boundary).  All short integers are aligned  on  a	 short
       word boundary.

       The  numbers  section is similar to the flags section.  Each capability
       takes up two bytes, and is stored as a little-endian short integer.  If
       the value represented is -1, the capability is taken to be missing.

       The  strings  section  is also similar.	Each capability is stored as a
       short integer, in the format above.  A value of -1 means the capability
       is missing.  Otherwise, the value is taken as an offset from the begin‐
       ning of the string table.  Special characters in ^X or \c notation  are
       stored  in  their  interpreted  form,  not the printing representation.
       Padding information $<nn>  and  parameter  information  %x  are	stored
       intact in uninterpreted form.

       The  final  section is the string table.	 It contains all the values of
       string capabilities referenced in the string section.  Each  string  is
       null terminated.

   EXTENDED STORAGE FORMAT
       The previous section describes the conventional terminfo binary format.
       With some minor variations of the offsets (see PORTABILITY),  the  same
       binary  format  is used in all modern UNIX systems.  Each system uses a
       predefined set of boolean, number or string capabilities.

       The ncurses libraries and applications support extended terminfo binary
       format,	allowing users to define capabilities which are loaded at run‐
       time.  This extension is made possible by using the fact that the other
       implementations	stop  reading the terminfo data when they have reached
       the end of the size given in the header.	 ncurses checks the size,  and
       if  it  exceeds	that  due  to  the predefined data, continues to parse
       according to its own scheme.

       First, it reads the extended header (5 short integers):

	    (1)	 count of extended boolean capabilities

	    (2)	 count of extended numeric capabilities

	    (3)	 count of extended string capabilities

	    (4)	 size of the extended string table in bytes.

	    (5)	 last offset of the extended string table in bytes.

       Using the counts and sizes, ncurses allocates arrays and reads data for
       the extended capabilties in the same order as the header information.

       The  extended  string  table  contains  values for string capabilities.
       After the end of these values, it contains the names for	 each  of  the
       extended	 capabilities  in  order,  e.g.,  booleans,  then  numbers and
       finally strings.

PORTABILITY
       Note that it is possible for setupterm to expect	 a  different  set  of
       capabilities  than  are actually present in the file.  Either the data‐
       base may have been updated since setupterm has been recompiled (result‐
       ing  in extra unrecognized entries in the file) or the program may have
       been recompiled more recently than the database was updated  (resulting
       in  missing  entries).  The routine setupterm must be prepared for both
       possibilities - this is why the numbers and sizes are included.	 Also,
       new  capabilities must always be added at the end of the lists of bool‐
       ean, number, and string capabilities.

       Despite the consistent use of little-endian for numbers and the	other‐
       wise  self-describing format, it is not wise to count on portability of
       binary terminfo entries between commercial UNIX versions.  The  problem
       is  that	 there	are  at least three versions of terminfo (under HP-UX,
       AIX, and OSF/1) which diverged from System V terminfo after  SVr1,  and
       have  added  extension  capabilities  to	 the string table that (in the
       binary format) collide with System V and XSI  Curses  extensions.   See
       terminfo(5)  for	 detailed  discussion of terminfo source compatibility
       issues.

EXAMPLE
       As an example, here is a hex dump of  the  description  for  the	 Lear-
       Siegler ADM-3, a popular though rather stupid early terminal:

       adm3a|lsi adm3a,
	       am,
	       cols#80, lines#24,
	       bel=^G, clear= 32$<1>, cr=^M, cub1=^H, cud1=^J,
	       cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
	       home=^^, ind=^J,

       0000  1a 01 10 00 02 00 03 00  82 00 31 00 61 64 6d 33  ........ ..1.adm3
       0010  61 7c 6c 73 69 20 61 64  6d 33 61 00 00 01 50 00  a|lsi ad m3a...P.
       0020  ff ff 18 00 ff ff 00 00  02 00 ff ff ff ff 04 00  ........ ........
       0030  ff ff ff ff ff ff ff ff  0a 00 25 00 27 00 ff ff  ........ ..%.'...
       0040  29 00 ff ff ff ff 2b 00  ff ff 2d 00 ff ff ff ff  ).....+. ..-.....
       0050  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       0060  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       0070  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       0080  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       0090  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       00a0  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       00b0  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       00c0  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       00d0  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       00e0  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       00f0  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       0100  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       0110  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  ........ ........
       0120  ff ff ff ff ff ff 2f 00  07 00 0d 00 1a 24 3c 31  ....../. .....$<1
       0130  3e 00 1b 3d 25 70 31 25  7b 33 32 7d 25 2b 25 63  >..=%p1% {32}%+%c
       0140  25 70 32 25 7b 33 32 7d  25 2b 25 63 00 0a 00 1e  %p2%{32} %+%c....
       0150  00 08 00 0c 00 0b 00 0a  00		       ........ .

LIMITS
       Some limitations: total compiled entries cannot exceed 4096 bytes.  The
       name field cannot exceed 128 bytes.

FILES
       /usr/share/terminfo/*/*	compiled terminal capability data base

SEE ALSO
       curses(3X), terminfo(5).

AUTHORS
       Thomas E. Dickey
       extended terminfo format for ncurses 5.0
       hashed database support for ncurses 5.6

       Eric S. Raymond

								       term(5)
[top]

List of man pages available for OpenMandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net