term man page on GhostBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
GhostBSD logo
[printable version]

term(7)								       term(7)

NAME
       term - conventions for naming terminal types

DESCRIPTION
       The  environment variable TERM should normally contain the type name of
       the terminal, console or	 display-device	 type  you  are	 using.	  This
       information  is	critical  for  all screen-oriented programs, including
       your editor and mailer.

       A default TERM value  will  be  set  on	a  per-line  basis  by	either
       /etc/inittab   (Linux  and  System-V-like  UNIXes)  or  /etc/ttys  (BSD
       UNIXes).	 This will nearly always suffice for workstation and microcom‐
       puter consoles.

       If  you	use a dialup line, the type of device attached to it may vary.
       Older UNIX systems pre-set a very dumb terminal	type  like  `dumb'  or
       `dialup'	 on  dialup lines.  Newer ones may pre-set `vt100', reflecting
       the prevalence of DEC VT100-compatible terminals and  personal-computer
       emulators.

       Modern  telnets pass your TERM environment variable from the local side
       to the remote one.  There can be problems if  the  remote  terminfo  or
       termcap entry for your type is not compatible with yours, but this sit‐
       uation is rare and can almost always be avoided by explicitly exporting
       `vt100'	(assuming you are in fact using a VT100-superset console, ter‐
       minal, or terminal emulator.)

       In any case, you are free to override the system TERM setting  to  your
       taste in your shell profile.  The tset(1) utility may be of assistance;
       you can give it a set of rules for deducing or  requesting  a  terminal
       type based on the tty device and baud rate.

       Setting	your  own  TERM value may also be useful if you have created a
       custom entry incorporating options (such as  visual  bell  or  reverse-
       video)  which  you  wish	 to  override the system default type for your
       line.

       Terminal type descriptions are  stored  as  files  of  capability  data
       underneath  /usr/share/misc/terminfo.  To browse a list of all terminal
       names recognized by the system, do

	    @TOE@ | more

       from your shell.	 These capability files are in a binary	 format	 opti‐
       mized  for  retrieval  speed  (unlike the old text-based termcap format
       they replace); to examine an entry, you must use the  infocmp(1M)  com‐
       mand.  Invoke it as follows:

	    infocmp entry-name

       where  entry-name  is the name of the type you wish to examine (and the
       name of its capability file the	subdirectory  of  /usr/share/misc/ter‐
       minfo  named  for  its  first letter).  This command dumps a capability
       file in the text format described by terminfo(5).

       The first line of a terminfo(5) description gives the  names  by	 which
       terminfo	 knows a terminal, separated by `|' (pipe-bar) characters with
       the last name field terminated by a comma.  The first name field is the
       type's primary name, and is the one to use when setting TERM.  The last
       name field (if distinct from the first) is actually  a  description  of
       the  terminal  type  (it	 may contain blanks; the others must be single
       words).	Name fields between  the  first	 and  last  (if	 present)  are
       aliases for the terminal, usually historical names retained for compat‐
       ibility.

       There are some conventions for how to  choose  terminal	primary	 names
       that  help  keep	 them  informative and unique.	Here is a step-by-step
       guide to naming terminals that also explains how to parse them:

       First, choose a root name.  The root will consist of a lower-case  let‐
       ter  followed by up to seven lower-case letters or digits.  You need to
       avoid using punctuation characters in root names, because they are used
       and  interpreted	 as filenames and shell meta-characters (such as !, $,
       *, ?, etc.) embedded in them may cause odd and unhelpful behavior.  The
       slash  (/),  or any other character that may be interpreted by anyone's
       file system (\, $, [, ]), is especially dangerous  (terminfo  is	 plat‐
       form-independent,  and  choosing	 names	with  special characters could
       someday make life difficult for users of a future port).	 The  dot  (.)
       character  is  relatively safe as long as there is at most one per root
       name; some historical terminfo names use it.

       The root name for a terminal or workstation console type should	almost
       always  begin  with a vendor prefix (such as hp for Hewlett-Packard, wy
       for Wyse, or att for AT&T terminals), or a common name of the  terminal
       line  (vt  for  the  VT	series	of  terminals from DEC, or sun for Sun
       Microsystems workstation	 consoles,  or	regent	for  the  ADDS	Regent
       series.	 You  can  list	 the  terminfo	tree  to see what prefixes are
       already in common use.  The root name prefix should  be	followed  when
       appropriate by a model number; thus vt100, hp2621, wy50.

       The  root  name	for a PC-Unix console type should be the OS name, i.e.
       linux, bsdos, freebsd, netbsd.  It should not be console or  any	 other
       generic that might cause confusion in a multi-platform environment!  If
       a model number follows, it should indicate either the OS release	 level
       or the console driver release level.

       The  root name for a terminal emulator (assuming it does not fit one of
       the standard ANSI or vt100 types) should be the program name or a read‐
       ily recognizable abbreviation of it (i.e. versaterm, ctrm).

       Following  the  root name, you may add any reasonable number of hyphen-
       separated feature suffixes.

       2p   Has two pages of memory.  Likewise 4p, 8p, etc.

       mc   Magic-cookie.  Some terminals (notably older Wyses) can only  sup‐
	    port one attribute without magic-cookie lossage.  Their base entry
	    is usually paired with another that has this suffix and uses magic
	    cookies to support multiple attributes.

       -am  Enable auto-margin (right-margin wraparound).

       -m   Mono mode - suppress color support.

       -na  No	arrow  keys  -	termcap	 ignores arrow keys which are actually
	    there on the terminal, so the user can use the arrow keys locally.

       -nam No auto-margin - suppress am capability.

       -nl  No labels - suppress soft labels.

       -nsl No status line - suppress status line.

       -pp  Has a printer port which is used.

       -rv  Terminal in reverse video mode (black on white).

       -s   Enable status line.

       -vb  Use visible bell (flash) rather than beep.

       -w   Wide; terminal is in 132 column mode.

       Conventionally, if your terminal type is a variant intended to  specify
       a  line	height,	 that  suffix should go first.	So, for a hypothetical
       FuBarCo model 2317 terminal in 30-line mode with	 reverse  video,  best
       form would be fubar-30-rv (rather than, say, `fubar-rv-30').

       Terminal	 types	that are written not as standalone entries, but rather
       as components to be plugged into other entries  via  use	 capabilities,
       are distinguished by using embedded plus signs rather than dashes.

       Commands which use a terminal type to control display often accept a -T
       option that accepts a terminal name  argument.	Such  programs	should
       fall  back on the TERM environment variable when no -T option is speci‐
       fied.

PORTABILITY
       For maximum compatibility with older System V UNIXes, names and aliases
       should be unique within the first 14 characters.

FILES
       /usr/share/misc/terminfo/?/*
	    compiled terminal capability data base

       /etc/inittab
	    tty line initialization (AT&T-like UNIXes)

       /etc/ttys
	    tty line initialization (BSD-like UNIXes)

SEE ALSO
       curses(3X), terminfo(5), term(5).

								       term(7)
[top]

List of man pages available for GhostBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net