tbl man page on FreeBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
FreeBSD logo
[printable version]

TBL(1)									TBL(1)

NAME
       tbl - format tables for troff

SYNOPSIS
       tbl [ -Cv ] [ files... ]

DESCRIPTION
       This manual page describes the GNU version of tbl, which is part of the
       groff document formatting system.  tbl compiles descriptions of	tables
       embedded	 within troff input files into commands that are understood by
       troff.  Normally, it should be invoked using the -t  option  of	groff.
       It is highly compatible with Unix tbl.  The output generated by GNU tbl
       cannot be processed with Unix troff; it	must  be  processed  with  GNU
       troff.	If  no files are given on the command line, the standard input
       will be read.  A filename of - will cause  the  standard	 input	to  be
       read.

OPTIONS
       -C     Enable  compatibility  mode  to  recognize .TS and .TE even when
	      followed by a character other than  space	 or  newline.	Leader
	      characters (\a) are handled as interpreted.

       -v     Print the version number.

USAGE
       tbl expects to find table descriptions wrapped in the .TS (table start)
       and .TE (table end) macros.  The line  immediately  following  the  .TS
       macro  may  contain  any	 of the following global options (ignoring the
       case of characters -- Unix tbl only accepts options with all characters
       lowercase or all characters uppercase):

       center Centers  the table (default is left-justified).  The alternative
	      keyword name centre is also recognized (this is a GNU tbl exten‐
	      sion).

       delim(xy)
	      Use x and y as start and end delimiters for eqn(1).

       expand Makes the table as wide as the current line length.

       box    Encloses the table in a box.

       doublebox
	      Encloses the table in a double box.

       allbox Encloses each item of the table in a box.

       frame  Same as box (GNU tbl only).

       doubleframe
	      Same as doublebox (GNU tbl only).

       tab(x) Uses  the	 character  x  instead of a tab to separate items in a
	      line of input data.

       linesize(n)
	      Sets lines or rules (e.g. from box) in n-point type.

       nokeep Don't use diversions to prevent  page  breaks  (GNU  tbl	only).
	      Normally tbl attempts to prevent undesirable breaks in the table
	      by using diversions.  This can  sometimes	 interact  badly  with
	      macro packages' own use of diversions, when footnotes, for exam‐
	      ple, are used.

       decimalpoint(c)
	      Set the character to be  recognized  as  the  decimal  point  in
	      numeric columns (GNU tbl only).

       nospaces
	      Ignore leading and trailing spaces in data items (GNU tbl only).

       The  global  options  must end with a semicolon.	 There might be white‐
       space after an option and its argument in parentheses.

       After global options come lines describing the format of each  line  of
       the  table.   Each  such	 format	 line  describes one line of the table
       itself, except that the last format line (which you  must  end  with  a
       period) describes all remaining lines of the table.  A single key char‐
       acter describes each column of each line of the	table.	 You  may  run
       format specs for multiple lines together on the same line by separating
       them with commas.

       You may follow each key character with specifiers  that	determine  the
       font  and  point	 size of the corresponding item, that determine column
       width, inter-column spacing, etc.

       The longest format line defines the number of  columns  in  the	table;
       missing format descriptors at the end of format lines are assumed to be
       `L'.  Extra columns in the data (which  have  no	 corresponding	format
       entry) are ignored.

       The available key characters are:

       c,C    Centers item within the column.

       r,R    Right-justifies item within the column.

       l,L    Left-justifies item within the column.

       n,N    Numerically  justifies  item  in	the column: Units positions of
	      numbers are aligned vertically.

       s,S    Spans previous item on the left into this column.

       a,A    Centers longest line in this column and then left-justifies  all
	      other lines in this column with respect to that centered line.

       ^      Spans down entry from previous row in this column.

       _,-    Replaces this entry with a horizontal line.

       =      Replaces this entry with a double horizontal line.

       |      The  corresponding  column  becomes  a  vertical rule (if two of
	      these are adjacent, a double vertical rule).

       A vertical bar to the left of the first key-letter or to the  right  of
       the last one produces a line at the edge of the table.

       Here  are the specifiers that can appear in suffixes to column key let‐
       ters:

       b,B    Short form of fB (make affected entries bold).

       i,I    Short form of fI (make affected entries italic).

       t,T    Start an item vertically spanning rows at the top of  its	 range
	      rather than vertically centering it.

       d,D    Start  an	 item  vertically  spanning  rows at the bottom of its
	      range rather than vertically centering it (GNU tbl only).

       v,V    Followed by a number, this indicates the vertical	 line  spacing
	      to  be used in a multi-line table entry.	If signed, the current
	      vertical line spacing is incremented  or	decremented  (using  a
	      signed number instead of a signed digit is a GNU tbl extension).
	      A vertical line spacing specifier followed by a  column  separa‐
	      tion  number must be separated by one or more blanks.  No effect
	      if the corresponding table entry isn't a text block.

       f,F    Either of these specifiers  may  be  followed  by	 a  font  name
	      (either  one  or	two  characters	 long),	 font number (a single
	      digit), or long name in parentheses (the last form is a GNU  tbl
	      extension).   A one-letter font name must be separated by one or
	      more blanks from whatever follows.

       p,P    Followed by a number, this does a	 point	size  change  for  the
	      affected	fields.	  If  signed, the current point size is incre‐
	      mented or decremented (using a signed number instead of a signed
	      digit  is a GNU tbl extension).  A point size specifier followed
	      by a column separation number must be separated by one  or  more
	      blanks.

       w,W    Minimal  column  width  value.   Must  be	 followed  either by a
	      troff(1) width expression in parentheses or a unitless  integer.
	      If  no  unit  is	given,	en  units  are used.  Also used as the
	      default line length for included text blocks.  If used  multiple
	      times  to	 specify  the  width for a particular column, the last
	      entry takes effect.

       x,X    This is a GNU tbl extension.  Either of these specifiers may  be
	      followed by a macro name (either one or two characters long), or
	      long name in parentheses.	 A one-letter macro name must be sepa‐
	      rated  by	 one  or more blanks from whatever follows.  The macro
	      which name can be specified here must be defined before creating
	      the  table.   It	is called just before the table's cell text is
	      output.  As implemented currently, this macro is only called  if
	      block  input  is used, that is, text between `T{' and `T}'.  The
	      macro should contain only simple troff requests  to  change  the
	      text  block formatting, like text adjustment, hyphenation, size,
	      or font.	The macro is called  after  other  cell	 modifications
	      like  b,	f or v are output.  Thus the macro can overwrite other
	      modification specifiers.

       e,E    Make equally-spaced columns.

       u,U    Move the corresponding column up one half-line.

       z,Z    Ignore the corresponding column for width-calculation purposes.

       A number suffix on a key character is interpreted as a  column  separa‐
       tion  in	 ens  (multiplied  in  proportion if the expand option is on).
       Default separation is 3n.

       The format lines are followed by lines containing the actual  data  for
       the  table, followed finally by .TE.  Within such data lines, items are
       normally separated by tab characters (or the character  specified  with
       the  tab option).  Long input lines can be broken across multiple lines
       if the last character on the line is `\' (which vanishes after concate‐
       nation).

       A dot starting a line, followed by anything but a digit is handled as a
       troff command, passed through without changes.  The table  position  is
       unchanged in this case.

       If  a  data  line consists of only `_' or `=', a single or double line,
       respectively, is drawn across the table at that point; if a single item
       in  a data line consists of only `_' or `=', then that item is replaced
       by a single or double line, joining its neighbours.   If	 a  data  item
       consists	 only  of `\_' or `\=', a single or double line, respectively,
       is drawn across the field at that point which does not join its	neigh‐
       bours.

       A data item consisting only of `\Rx' (`x' any character) is replaced by
       repetitions of character `x' as wide as the  column  (not  joining  its
       neighbours).

       A  data	item  consisting only of `\^' indicates that the field immedi‐
       ately above spans downward over this row.

       A text block can be used to enter data as a single entry which would be
       too  long as a simple string between tabs.  It is started with `T{' and
       closed with `T}'.  The former must end a	 line,	and  the  latter  must
       start  a	 line, probably followed by other data columns (separated with
       tabs).  By default, the text block is formatted with the settings which
       were active before entering the table, possibly overridden by the v and
       w tbl specifiers.  For example, to make all text	 blocks	 ragged-right,
       insert .na right before the starting .TS (and .ad after the table).

       To  change  the data format within a table, use the .T& command (at the
       start of a line).  It is followed by format  and	 data  lines  (but  no
       global options) similar to the .TS request.

INTERACTION WITH EQN
       tbl(1)  should  always  be called before eqn(1) (groff(1) automatically
       takes care of the correct order of preprocessors).

GNU TBL ENHANCEMENTS
       There is no limit on the number of columns in a table, nor any limit on
       the  number of text blocks.  All the lines of a table are considered in
       deciding column widths, not just the  first  200.   Table  continuation
       (.T&) lines are not restricted to the first 200 lines.

       Numeric and alphabetic items may appear in the same column.

       Numeric and alphabetic items may span horizontally.

       tbl uses register, string, macro and diversion names beginning with the
       digit 3.	 When using tbl you should avoid  using	 any  names  beginning
       with a 3.

BUGS
       You should use .TS H/.TH in conjunction with a supporting macro package
       for all multi-page boxed tables.	 If there is no header that  you  wish
       to  appear  at  the  top	 of each page of the table, place the .TH line
       immediately after the format section.  Do not enclose a multi-page  ta‐
       ble within keep/release macros, or divert it in any other way.

       A text block within a table must be able to fit on one page.

       The bp request cannot be used to force a page-break in a multi-page ta‐
       ble.  Instead, define BP as follows

	      .de BP
	      .ie '\\n(.z'' .bp \\$1
	      .el \!.BP \\$1
	      ..

       and use BP instead of bp.

       Using \a directly in a table to get leaders will not  work  (except  in
       compatibility mode).  This is correct behaviour: \a is an uninterpreted
       leader.	To get leaders use a real leader, either by using a control  A
       or like this:

	      .ds a \a
	      .TS
	      tab(;);
	      lw(1i) l.
	      A\*a;B
	      .TE

REFERENCE
       Lesk, M.E.: "TBL -- A Program to Format Tables".	 For copyright reasons
       it cannot be included in the groff  distribution,  but  copies  can  be
       found with a title search on the World Wide Web.

SEE ALSO
       groff(1), troff(1)

Groff Version 1.19.2		20 October 2005				TBL(1)
[top]

List of man pages available for FreeBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net