tar man page on NetBSD

Man page or keyword search:  
man Server   9087 pages
apropos Keyword Search (all sections)
Output format
NetBSD logo
[printable version]

TAR(1)			  BSD General Commands Manual			TAR(1)

NAME
     tar — tape archiver

SYNOPSIS
     tar [-]{crtux}[-014578befHhjklmOoPpqSvwXZz] [archive] [blocksize]
	 [-C directory] [-s replstr] [-T file] [file ...]

DESCRIPTION
     The tar command creates, adds files to, or extracts files from an archive
     file in “tar” format.  A tar archive is often stored on a magnetic tape,
     but can be stored equally well on a floppy, CD-ROM, or in a regular disk
     file.

     One of the following flags must be present:

     -c, --create  Create new archive, or overwrite an existing archive,
		   adding the specified files to it.

     -r, --append  Append the named new files to existing archive.  Note that
		   this will only work on media on which an end-of-file mark
		   can be overwritten.

     -t, --list	   List contents of archive.  If any files are named on the
		   command line, only those files will be listed.

     -u, --update  Alias for -r.

     -x, --extract, --get
		   Extract files from archive.	If any files are named on the
		   command line, only those files will be extracted from the
		   archive.  If more than one copy of a file exists in the ar‐
		   chive, later copies will overwrite earlier copies during
		   extraction.	The file mode and modification time are pre‐
		   served if possible.	The file mode is subject to modifica‐
		   tion by the umask(2).

     In addition to the flags mentioned above, any of the following flags may
     be used:

     -b blocking factor, --block-size blocking factor
		   Set blocking factor to use for the archive.	tar uses 512
		   byte blocks.	 The default is 20, the maximum is 126.	 Ar‐
		   chives with a blocking factor larger 63 violate the POSIX
		   standard and will not be portable to all systems.

     -e		   Stop after first error.

     -f archive, --file archive
		   Filename where the archive is stored.  Defaults to
		   /dev/rst0.  If the archive is of the form:
		   [[user@]host:]file then the archive will be processed using
		   rmt(8).

     -h, --dereference
		   Follow symbolic links as if they were normal files or
		   directories.

     -j, --bzip2, --bunzip2
		   Use bzip2(1) for compression of the archive.	 This option
		   is a GNU extension.

     -k, --keep-old-files
		   Keep existing files; don't overwrite them from archive.

     -l, --one-file-system
		   Do not descend across mount points.

     -m, --modification-time
		   Do not preserve modification time.

     -O		   When creating and appending to an archive, write old-style
		   (non-POSIX) archives.  When extracting from an archive,
		   extract to standard output.

     -o, --portability, --old-archive
		   Don't write directory information that the older (V7) style
		   tar is unable to decode.  This implies the -O flag.

     -p, --preserve-permissions, --preserve
		   Preserve user and group ID as well as file mode regardless
		   of the current umask(2).  The setuid and setgid bits are
		   only preserved if the user is the superuser.	 Only meaning‐
		   ful in conjunction with the -x flag.

     -q, --fast-read
		   Select the first archive member that matches each pattern
		   operand.  No more than one archive member is matched for
		   each pattern.  When members of type directory are matched,
		   the file hierarchy rooted at that directory is also
		   matched.

     -S, --sparse  This flag has no effect as tar always generates sparse
		   files.

     -s replstr	   Modify the file or archive member names specified by the
		   pattern or file operands according to the substitution
		   expression replstr, using the syntax of the ed(1) utility
		   regular expressions.	 The format of these regular expres‐
		   sions are:
			 /old/new/[gps]
		   As in ed(1), old is a basic regular expression and new can
		   contain an ampersand (&), \n (where n is a digit) back-ref‐
		   erences, or subexpression matching.	The old string may
		   also contain ⟨newline⟩ characters.  Any non-null character
		   can be used as a delimiter (/ is shown here).  Multiple -s
		   expressions can be specified.  The expressions are applied
		   in the order they are specified on the command line, termi‐
		   nating with the first successful substitution.  The
		   optional trailing g continues to apply the substitution
		   expression to the pathname substring which starts with the
		   first character following the end of the last successful
		   substitution.  The first unsuccessful substitution stops
		   the operation of the g option.  The optional trailing p
		   will cause the final result of a successful substitution to
		   be written to standard error in the following format:
			 <original pathname> >> <new pathname>
		   File or archive member names that substitute to the empty
		   string are not selected and will be skipped.	 The substitu‐
		   tions are applied by default to the destination hard and
		   symbolic links.  The optional trailing s prevents the sub‐
		   stitutions from being performed on symbolic link destina‐
		   tions.

     -v		   Verbose operation mode.

     -w, --interactive, --confirmation
		   Interactively rename files.	This option causes tar to
		   prompt the user for the filename to use when storing or
		   extracting files in an archive.

     --xz	   Compress/decompress archive using xz(1).

     -z, --gzip, --gunzip
		   Compress/decompress archive using gzip(1).

     -B, --read-full-blocks
		   Reassemble small reads into full blocks (For reading from
		   4.2BSD pipes).

     -C directory, --directory directory
		   This is a positional argument which sets the working direc‐
		   tory for the following files.  When extracting, files will
		   be extracted into the specified directory; when creating,
		   the specified files will be matched from the directory.
		   This argument and its parameter may also appear in a file
		   list specified by -T.

     -H		   Only follow symlinks given on command line.

		   Note SysVr3/i386 picked up ISC/SCO UNIX compatibility which
		   implemented “-F file” which was defined as obtaining a list
		   of command line switches and files on which to operate from
		   the specified file, but SunOS-5 uses “-I file” because they
		   use ‘-F’ to mean something else.  We might someday provide
		   SunOS-5 compatibility but it makes little sense to confuse
		   things with ISC/SCO compatibility.

     -P, --absolute-paths
		   Do not strip leading slashes (‘/’) from pathnames.  The
		   default is to strip leading slashes.

     -T file, --files-from file
		   Read the names of files to archive or extract from the
		   given file, one per line.  A line may also specify the
		   positional argument “-C directory”.

     -X file, --exclude-from file
		   Exclude files matching the shell glob patterns listed in
		   the given file.

		   Note that it would be more standard to use this option to
		   mean ``do not cross filesystem mount points.''

     -Z, --compress, --uncompress
		   Compress archive using compress.

     --strict	   Do not enable GNU tar extensions such as long filenames and
		   long link names.

     --atime-preserve
		   Preserve file access times.

     --chroot	   chroot() to the current directory before extracting files.
		   Use with -x and -h to make absolute symlinks relative to
		   the current directory.

     --unlink	   Ignored, only accepted for compatibility with other tar
		   implementations.  tar always unlinks files before creating
		   them.

     --use-compress-program program
		   Use the named program as the program to decompress the
		   input.

     --force-local
		   Do not interpret filenames that contain a ‘:’ as remote
		   files.

     --insecure	   Normally tar ignores filenames that contain “..” as a path
		   component.  With this option, files that contain “..” can
		   be processed.

     --no-recursion
		   Cause files of type directory being copied or archived, or
		   archive members of type directory being extracted, to match
		   only the directory file or archive member and not the file
		   hierarchy rooted at the directory.

     The options [-014578] can be used to select one of the compiled-in backup
     devices, /dev/rstN.

FILES
     /dev/rst0	default archive name

DIAGNOSTICS
     tar will exit with one of the following values:

     0	 All files were processed successfully.

     1	 An error occurred.

     Whenever tar cannot create a file or a link when extracting an archive or
     cannot find a file while writing an archive, or cannot preserve the user
     ID, group ID, file mode, or access and modification times when the -p
     option is specified, a diagnostic message is written to standard error
     and a non-zero exit value will be returned, but processing will continue.
     In the case where tar cannot create a link to a file, tar will not create
     a second copy of the file.

     If the extraction of a file from an archive is prematurely terminated by
     a signal or error, tar may have only partially extracted the file the
     user wanted.  Additionally, the file modes of extracted files and direc‐
     tories may have incorrect file bits, and the modification and access
     times may be wrong.

     If the creation of an archive is prematurely terminated by a signal or
     error, tar may have only partially created the archive which may violate
     the specific archive format specification.

SEE ALSO
     cpio(1), pax(1)

HISTORY
     A tar command first appeared in Version 7 AT&T UNIX.

AUTHORS
     Keith Muller at the University of California, San Diego.

BSD				 June 18, 2011				   BSD
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server NetBSD

List of man pages available for NetBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net