systemd-journald.socket man page on Kali

Man page or keyword search:  
man Server   9211 pages
apropos Keyword Search (all sections)
Output format
Kali logo
[printable version]

SYSTEMD-JOURNALD.SERVICE(8)systemd-journald.serviceSYSTEMD-JOURNALD.SERVICE(8)

NAME
       systemd-journald.service, systemd-journald.socket, systemd-journald-
       dev-log.socket, systemd-journald-audit.socket, systemd-journald -
       Journal service

SYNOPSIS
       systemd-journald.service

       systemd-journald.socket

       systemd-journald-dev-log.socket

       systemd-journald-audit.socket

       /lib/systemd/systemd-journald

DESCRIPTION
       systemd-journald is a system service that collects and stores logging
       data. It creates and maintains structured, indexed journals based on
       logging information that is received from a variety of sources:

       ·   Kernel log messages, via kmsg

       ·   Simple system log messages, via the libc syslog(3) call

       ·   Structured system log messages via the native Journal API, see
	   sd_journal_print(4)

       ·   Standard output and standard error of service units. For further
	   details see below.

       ·   Audit records, originating from the kernel audit subsystem

       The daemon will implicitly collect numerous metadata fields for each
       log messages in a secure and unfakeable way. See systemd.journal-
       fields(7) for more information about the collected metadata.

       Log data collected by the journal is primarily text-based but can also
       include binary data where necessary. Individual fields making up a log
       record stored in the journal may be up to 2^64-1 bytes in size.

       The journal service stores log data either persistently below
       /var/log/journal or in a volatile way below /run/log/journal/ (in the
       latter case it is lost at reboot). By default, log data is stored
       persistently if /var/log/journal/ exists during boot, with an implicit
       fallback to volatile storage otherwise. Use Storage= in
       journald.conf(5) to configure where log data is placed, independently
       of the existence of /var/log/journal/.

       On systems where /var/log/journal/ does not exist yet but where
       persistent logging is desired (and the default journald.conf is used),
       it is sufficient to create the directory, and ensure it has the correct
       access modes and ownership:

	   mkdir -p /var/log/journal
	   systemd-tmpfiles --create --prefix /var/log/journal

       See journald.conf(5) for information about the configuration of this
       service.

STREAM LOGGING
       The systemd service manager invokes all service processes with standard
       output and standard error connected to the journal by default. This
       behaviour may be altered via the StandardOutput=/StandardError= unit
       file settings, see systemd.exec(5) for details. The journal converts
       the log byte stream received this way into individual log records,
       splitting the stream at newline ("\n", ASCII 10) and NUL bytes.

       If systemd-journald.service is stopped, the stream connections
       associated with all services are terminated. Further writes to those
       streams by the service will result in EPIPE errors. In order to react
       gracefully in this case it is recommended that programs logging to
       standard output/error ignore such errors. If the SIGPIPE UNIX signal
       handler is not blocked or turned off, such write attempts will also
       result in such process signals being generated, see signal(7). To
       mitigate this issue, systemd service manager explicitly turns off the
       SIGPIPE signal for all invoked processes by default (this may be
       changed for each unit individually via the IgnoreSIGPIPE= option, see
       systemd.exec(5) for details). After the standard output/standard error
       streams have been terminated they may not be recovered until the
       services they are associated with are restarted. Note that during
       normal operation, systemd-journald.service stores copies of the file
       descriptors for those streams in the service manager. If
       systemd-journald.service is restarted using systemctl restart or
       equivalent operation instead of a pair of separate systemctl stop and
       systemctl start commands (or equivalent operations), these stream
       connections are not terminated and survive the restart. It is thus safe
       to restart systemd-journald.service, but stopping it is not
       recommended.

       Note that the log record metadata for records transferred via such
       standard output/error streams reflect the metadata of the peer the
       stream was originally created for. If the stream connection is passed
       on to other processes (such as further child processes forked off the
       main service process), the log records will not reflect their metadata,
       but will continue to describe the original process. This is different
       from the other logging transports listed above, which are inherently
       record based and where the metadata is always associated with the
       individual record.

       In addition to the implicit standard output/error logging of services,
       stream logging is also available via the systemd-cat(1) command line
       tool.

       Currently, the number of parallel log streams systemd-journald will
       accept is limited to 4096. When this limit is reached further log
       streams may be established but will receive EPIPE right from the
       beginning.

SIGNALS
       SIGUSR1
	   Request that journal data from /run/ is flushed to /var/ in order
	   to make it persistent (if this is enabled). This must be used after
	   /var/ is mounted, as otherwise log data from /run is never flushed
	   to /var regardless of the configuration. The journalctl --flush
	   command uses this signal to request flushing of the journal files,
	   and then waits for the operation to complete. See journalctl(1) for
	   details.

       SIGUSR2
	   Request immediate rotation of the journal files. The journalctl
	   --rotate command uses this signal to request journal file rotation.

       SIGRTMIN+1
	   Request that all unwritten log data is written to disk. The
	   journalctl --sync command uses this signal to trigger journal
	   synchronization, and then waits for the operation to complete.

KERNEL COMMAND LINE
       A few configuration parameters from journald.conf may be overridden on
       the kernel command line:

       systemd.journald.forward_to_syslog=, systemd.journald.forward_to_kmsg=,
       systemd.journald.forward_to_console=, systemd.journald.forward_to_wall=
	   Enables/disables forwarding of collected log messages to syslog,
	   the kernel log buffer, the system console or wall.

	   See journald.conf(5) for information about these settings.

ACCESS CONTROL
       Journal files are, by default, owned and readable by the
       "systemd-journal" system group but are not writable. Adding a user to
       this group thus enables her/him to read the journal files.

       By default, each logged in user will get her/his own set of journal
       files in /var/log/journal/. These files will not be owned by the user,
       however, in order to avoid that the user can write to them directly.
       Instead, file system ACLs are used to ensure the user gets read access
       only.

       Additional users and groups may be granted access to journal files via
       file system access control lists (ACL). Distributions and
       administrators may choose to grant read access to all members of the
       "wheel" and "adm" system groups with a command such as the following:

	   # setfacl -Rnm g:wheel:rx,d:g:wheel:rx,g:adm:rx,d:g:adm:rx /var/log/journal/

       Note that this command will update the ACLs both for existing journal
       files and for future journal files created in the /var/log/journal/
       directory.

FILES
       /etc/systemd/journald.conf
	   Configure systemd-journald behavior. See journald.conf(5).

       /run/log/journal/machine-id/*.journal,
       /run/log/journal/machine-id/*.journal~,
       /var/log/journal/machine-id/*.journal,
       /var/log/journal/machine-id/*.journal~
	   systemd-journald writes entries to files in
	   /run/log/journal/machine-id/ or /var/log/journal/machine-id/ with
	   the ".journal" suffix. If the daemon is stopped uncleanly, or if
	   the files are found to be corrupted, they are renamed using the
	   ".journal~" suffix, and systemd-journald starts writing to a new
	   file.  /run is used when /var/log/journal is not available, or when
	   Storage=volatile is set in the journald.conf(5) configuration file.

       /dev/kmsg, /dev/log, /run/systemd/journal/dev-log,
       /run/systemd/journal/socket, /run/systemd/journal/stdout
	   Sockets and other paths that systemd-journald will listen on that
	   are visible in the file system. In addition to these, journald can
	   listen for audit events using netlink.

SEE ALSO
       systemd(1), journalctl(1), journald.conf(5), systemd.journal-fields(7),
       sd-journal(3), systemd-coredump(8), setfacl(1), sd_journal_print(4),
       pydoc systemd.journal

systemd 236					   SYSTEMD-JOURNALD.SERVICE(8)
[top]

List of man pages available for Kali

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net