SOCKS.CONF(5)SOCKS.CONF(5)NAMEsocks.conf - SOCKS clients configuration file
SYNOPSIS
/etc/socks.conf
DESCRIPTION
All SOCKS client programs use this file to determine whether to use
direct or proxy connection to a given destination host, and to exert
access control based on the destination host, the requested service
(port number on the destination host), and the effective user-id of the
requesting local user. If this file is absent, SOCKS clients will only
try direct connections, making them behave like their regular counter‐
parts.
Each line in the file may be up to 1024 characters long. Lines start‐
ing with a # are comments. Non-comment lines must be of one of the
three forms:
deny [*=userlist] dst_addr dst_mask [op dst_port] [: shell_cmd]
direct [*=userlist] dst_addr dst_mask [op dst_port] [: shell_cmd]
sockd [@=serverlist] [*=userlist] dst_addr dst_mask [op dst_port] [: shell_cmd]
A deny line tells the SOCKS clients when to reject a request. A direct
lines tells when to use a direct connection. A sockd line indicates
when to use a proxy connection and, optionally, which SOCKS proxy
server or servers it should try.
Spaces and tabs separate the fields. Fields enclosed in square brackets
are optional.
The userlist field, when present, consists of one or more user-ids or
filenames, with comma as separator. No spaces or tabs are allowed in
the list. The user-ids should be ids of users on the local host, not
those on the destination host or the SOCKS server host. The filenames
must be full pathnames with the leading /. Inside the specified files,
user-ids may be listed one or several per line, with any combination of
blanks, tabs, and commas as separators. The appearance of # marks the
remainder of the line as comment. Each line in the files may be up to
1023 characters long. If the *=userlist field is omitted, the line
applies to all user-ids.
The dst_addr field specifies either the IP address of a host, a net‐
work, or a subnet in the usual dotted form, e.g., 129.201.4.0, or a
doamin name, e.g., internic.net. dst_mask specifies mask for the IP
address used in dst_addr. Bits in dst_mask that are set to 0 indicate
the bit positions to be ignored during comparison of IP addresses. So,
specifying 255.255.255.255 in dst_mask demands an exact match with
dst_addr, whereas 0.0.0.0 in dst_mask causes a matching with any given
destination address regardless of what is specified for dst_addr. If a
domain name is used for dst_addr, the contents of dst_mask are ignored,
though it must still be supplied (simply use 0.0.0.0). If the domain
name starts with a period, it specifies a zone and matches all domain
names within that zone, otherwise it matches only the domain name
itself. For example, xyz.com matches only xyz.comP, while .xyz.com mac‐
thes not only xyz.com, but also abc.xyz.com and this.and.that.xyz.com,
among others. The special symbol ALL (which must be entirely in upper‐
case) matches everything. Domain names are otherwise case-insentive.
When using a domain name in dst_addr, you have be very careful in main‐
taining your DNS setup. See the last few paragraphs in sockd.conf(5).
The op field must be eq, neq, lt, gt, le, or ge, for the condition of
equal, not equal, less than, greater than, less than or equal, and
greater than or equal, respectively. The dst_port field can be either
a port number, e.g., 23, or the equivalent service name as specified in
file /etc/services, e.g., telnet for port number 23. If this pair is
omitted, the line applies to all services.
The serverlist, which may only be used in a sockd line, consists of one
or more SOCKS proxy servers, which the client program should try to use
(in the indicated order) for establishing a proxy connection. Only
commas can be used as separator, no spaces or tabs are allowed in the
list. Domain names of the servers may be used in the list, though it is
probably more prudent to specify IP addresses. If this field is omit‐
ted, the client program will use the default SOCKS proxy server, which
is determined by the environment variable SOCKS_SERVER if it exists, or
the name compiled into the SOCKS client program otherwise.
Consider
sockd @=1.2.3.4 *=boss,root 11.12.13.14 255.255.255.255 eq telnet
To match the condition indicated in this line, a request must come from
a local user whose effective id is either boss or root, the destination
IP address must be 11.12.13.14 exactly, and the service requested must
be telnet. In that case, connection to host 11.12.13.14 should be done
via a SOCKS proxy server on host 1.2.3.4.
Every time a SOCKS client has to make a network connection, it checks
the pending request against the file /etc/socks.conf, one line at a
time. Once it finds a line with conditions that are matched by the
request, the action specified on that line is taken. The remaining
lines of file /etc/socks.conf are skipped. So the order of the lines in
the file is extremely important; switch two lines and you may have
entirely different results. If no matching line is found throughout
the file, the request is denied.
The shell_cmd field specifies a command string that is executed when
the conditions on that line are satisfied. The following substitutions
occur before the string is presented to the Borne shell for execution:
%A -- replaced by the client host's domainname if known, by its IP address otherwise
%a -- replaced by the client host's IP address
%c -- replaced by "connect" or "bind"
%p -- replaced by the process id of the client program
%S -- replaced by the service name (e.g., ftp) if known, by the destination port number otherwise
%s -- replaced by the destination port number
%U -- replaced by the user-id at login
%u -- replaced by the effective user-id
%Z -- replaced by the destination host's domainname if known, by its IP address otherwise
%z -- replaced by the destination host's IP address
%% -- replaced by a single %
Several shell commands can be strung together in the usual way with
`|', `;', etc.
Although there is an implied 'deny all' at the end of the control file,
you may supply one explicitly so as to take some specific action when
requests are so rejected, e.g.,
deny 0.0.0.0 0.0.0.0 : /usr/ucb/mail -s 'SOCKS: rejected %S from %u to %Z' root
Unlike the previous version, connection to address 127.0.0.1 or 0.0.0.0
is always done directly to localhost, so there is no need to specify
either of them in /etc/socks.conf.
You have the option of using the frozen file /etc/socks.fc instead of
/etc/socks.conf. The frozen file is produced by make_socksfc and is
essentially the memory image of the parsed configuration file. using it
can reduced the start-up delay of SOCKS client applications since no
parsing is needed. Because SOCKS client applications always look for
/etc/socks.fc first, be sure that you always run make_socksfc every
time after you modify /etc/socks.conf.
ENVIRONMENT
SOCKS_SERVER, if defined, specifies the name or IP address of the SOCKS
proxy server host to use, overriding the default server compiled into
the programs.
SEE ALSOdump_socksfc(8), make_socksfc(8), sockd(8), sockd.conf(5),
socks_clients(1), socks.fc(5)
May 6, 1996 SOCKS.CONF(5)
