socket man page on AIX

Man page or keyword search:  
man Server   4752 pages
apropos Keyword Search (all sections)
Output format
AIX logo
[printable version]

socket(n)		     Tcl Built-In Commands		     socket(n)

______________________________________________________________________________

NAME
       socket - Open a TCP network connection

SYNOPSIS
       socket ?options? host port

       socket -server command ?options? port
_________________________________________________________________

DESCRIPTION
       This  command  opens  a network socket and returns a channel identifier
       that may be used in future invocations of commands like read, puts  and
       flush.	At present only the TCP network protocol is supported;	future
       releases may include support for additional protocols.  The socket com‐
       mand  may be used to open either the client or server side of a connec‐
       tion, depending on whether the -server switch is specified.

       Note that the default encoding for all sockets is the system  encoding,
       as returned by encoding system.	Most of the time, you will need to use
       fconfigure to alter this to something else, such as  utf-8  (ideal  for
       communicating  with  other Tcl processes) or iso8859-1 (useful for many
       network protocols, especially the older ones).

CLIENT SOCKETS
       If the -server option is not specified, then the client side of a  con‐
       nection is opened and the command returns a channel identifier that can
       be used for both reading and writing.  Port and host specify a port  to
       connect to;  there must be a server accepting connections on this port.
       Port is an integer port number (or service name,	 where	supported  and
       understood  by  the host operating system) and host is either a domain-
       style name such as  www.tcl.tk  or  a  numerical	 IP  address  such  as
       127.0.0.1.   Use localhost to refer to the host on which the command is
       invoked.

       The following options may also be present before host to specify	 addi‐
       tional information about the connection:

       -myaddr addr
	      Addr  gives the domain-style name or numerical IP address of the
	      client-side network interface to use for the  connection.	  This
	      option  may be useful if the client machine has multiple network
	      interfaces.  If the  option  is  omitted	then  the  client-side
	      interface will be chosen by the system software.

       -myport port
	      Port  specifies  an  integer port number (or service name, where
	      supported and understood by the host operating  system)  to  use
	      for  the	client's  side	of  the connection.  If this option is
	      omitted, the client's port number will be chosen	at  random  by
	      the system software.

       -async The  -async  option will cause the client socket to be connected
	      asynchronously. This means that the socket will be created imme‐
	      diately  but  may	 not  yet be connected to the server, when the
	      call to socket returns. When a gets or  flush  is	 done  on  the
	      socket  before  the connection attempt succeeds or fails, if the
	      socket is in blocking mode, the operation will  wait  until  the
	      connection  is completed or fails. If the socket is in nonblock‐
	      ing mode and a gets or flush is done on the  socket  before  the
	      connection  attempt  succeeds  or	 fails,	 the operation returns
	      immediately and fblocked on the socket  returns  1.  Synchronous
	      client  sockets  may  be switched (after they have connected) to
	      operating in asynchronous mode using:
		     fconfigure chan -blocking 0

	      See the fconfigure command for more details.

SERVER SOCKETS
       If the -server option is specified then the new socket will be a server
       for  the port given by port (either an integer or a service name, where
       supported and understood by the host operating system; if port is zero,
       the  operating  system  will  allocate a free port to the server socket
       which may be discovered by  using  fconfigure  to  read	the  -sockname
       option).	  Tcl will automatically accept connections to the given port.
       For each connection Tcl will create a new channel that may be  used  to
       communicate with the client.  Tcl then invokes command with three addi‐
       tional arguments: the name of the new channel, the address, in  network
       address notation, of the client's host, and the client's port number.

       The following additional option may also be specified before port:

       -myaddr addr
	      Addr  gives the domain-style name or numerical IP address of the
	      server-side network interface to use for the  connection.	  This
	      option  may be useful if the server machine has multiple network
	      interfaces.  If the option is omitted then the server socket  is
	      bound  to	 the  special address INADDR_ANY so that it can accept
	      connections from any interface.

       Server channels cannot be used for input or output; their sole  use  is
       to  accept new client connections. The channels created for each incom‐
       ing client connection are opened for  input  and	 output.  Closing  the
       server channel shuts down the server so that no new connections will be
       accepted;  however, existing connections will be unaffected.

       Server sockets depend on the Tcl event mechanism to find out  when  new
       connections  are	 opened.   If the application does not enter the event
       loop, for example by invoking the vwait command or calling the C proce‐
       dure Tcl_DoOneEvent, then no connections will be accepted.

       If  port	 is  specified	as zero, the operating system will allocate an
       unused port for use as a server socket.	The port number actually allo‐
       cated  may  be retrieved from the created server socket using the fcon‐
       figure command to retrieve the -sockname option as described below.

CONFIGURATION OPTIONS
       The fconfigure command can be used to query several readonly configura‐
       tion options for socket channels:

       -error This  option  gets the current error status of the given socket.
	      This is useful when you need to  determine  if  an  asynchronous
	      connect  operation  succeeded.  If there was an error, the error
	      message is returned.  If there was no error, an empty string  is
	      returned.

       -sockname
	      This  option  returns a list of three elements, the address, the
	      host name and the port number for the socket. If the  host  name
	      cannot  be  computed,  the  second  element  is identical to the
	      address, the first element of the list.

       -peername
	      This option is not supported by server sockets. For  client  and
	      accepted	sockets, this option returns a list of three elements;
	      these are the address, the host name and the port to  which  the
	      peer  socket  is	connected or bound. If the host name cannot be
	      computed, the second element of the list	is  identical  to  the
	      address, its first element.

EXAMPLES
       Here is a very simple time server:
	      proc Server {channel clientaddr clientport} {
		 puts "Connection from $clientaddr registered"
		 puts $channel [clock format [clock seconds]]
		 close $channel
	      }

	      socket -server Server 9900
	      vwait forever

       And here is the corresponding client to talk to the server:
	      set server localhost
	      set sockChan [socket $server 9900]
	      gets $sockChan line
	      close $sockChan
	      puts "The time on $server is $line"

SEE ALSO
       fconfigure(n), flush(n), open(n), read(n)

KEYWORDS
       bind,  channel, connection, domain name, host, network address, socket,
       tcp

Tcl				      8.0			     socket(n)
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server AIX

List of man pages available for AIX

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net