slabinfo man page on Raspbian

Man page or keyword search:  
man Server   8174 pages
apropos Keyword Search (all sections)
Output format
Raspbian logo
[printable version]

SLABINFO(5)		   Linux Programmer's Manual		   SLABINFO(5)

NAME
       /proc/slabinfo - Kernel slab allocator statistics

SYNOPSIS
       cat /proc/slabinfo

DESCRIPTION
       Frequently used objects in the Linux kernel (buffer heads, inodes, den‐
       tries, etc.)  have their own cache.  The file /proc/slabinfo gives sta‐
       tistics.	 For example:

	   % cat /proc/slabinfo
	   slabinfo - version: 1.1
	   kmem_cache		 60	78    100    2	  2    1
	   blkdev_requests     5120   5120     96  128	128    1
	   mnt_cache		 20	40     96    1	  1    1
	   inode_cache	       7005  14792    480 1598 1849    1
	   dentry_cache	       5469   5880    128  183	196    1
	   filp			726    760     96   19	 19    1
	   buffer_head	      67131  71240     96 1776 1781    1
	   vm_area_struct      1204   1652     64   23	 28    1
	   ...
	   size-8192		  1	17   8192    1	 17    2
	   size-4096		 41	73   4096   41	 73    1
	   ...

       For  each  slab	cache,	the cache name, the number of currently active
       objects, the total number of available objects, the size of each object
       in  bytes,  the	number	of  pages with at least one active object, the
       total number of allocated pages, and the number of pages per  slab  are
       given.

       Note  that because of object alignment and slab cache overhead, objects
       are not normally packed tightly into pages.  Pages with even one in-use
       object are considered in-use and cannot be freed.

       Kernels	compiled  with	slab cache statistics will also have "(statis‐
       tics)" in the first line of output, and will have 5 additional columns,
       namely:	the  high  water  mark	of active objects; the number of times
       objects have been allocated; the number of times the  cache  has	 grown
       (new pages added to this cache); the number of times the cache has been
       reaped (unused pages removed from this cache); and the number of	 times
       there  was  an error allocating new pages to this cache.	 If slab cache
       statistics are not enabled for this kernel, these columns will  not  be
       shown.

       SMP  systems  will  also	 have "(SMP)" in the first line of output, and
       will have two additional columns for  each  slab,  reporting  the  slab
       allocation  policy  for	the  CPU-local	cache  (to reduce the need for
       inter-CPU synchronization when allocating objects from the cache).  The
       first  column  is the per-CPU limit: the maximum number of objects that
       will be cached for each CPU.  The second column is the batchcount:  the
       maximum	number of free objects in the global cache that will be trans‐
       ferred to the per-CPU cache if it is empty, or the number of objects to
       be returned to the global cache if the per-CPU cache is full.

       If  both	 slab cache statistics and SMP are defined, there will be four
       additional columns, reporting the per-CPU cache statistics.  The	 first
       two are the per-CPU cache allocation hit and miss counts: the number of
       times an object was or was not available in the per-CPU cache for allo‐
       cation.	 The  next two are the per-CPU cache free hit and miss counts:
       the number of times a freed object could or could not  fit  within  the
       per-CPU cache limit, before flushing objects to the global cache.

       It  is possible to tune the SMP per-CPU slab cache limit and batchcount
       via:

	   echo "cache_name limit batchcount" > /proc/slabinfo

FILES
       <linux/slab.h>

VERSIONS
       /proc/slabinfo exists since Linux 2.1.23.   SMP	per-CPU	 caches	 exist
       since Linux 2.4.0-test3.

NOTES
       Since  Linux 2.6.16 the file /proc/slabinfo is only present if the CON‐
       FIG_SLAB kernel configuration option is enabled.

COLOPHON
       This page is part of release 3.27 of the Linux  man-pages  project.   A
       description  of	the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

				  2007-09-30			   SLABINFO(5)
[top]

List of man pages available for Raspbian

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net