sigtrap man page on OpenServer

Man page or keyword search:  
man Server   5388 pages
apropos Keyword Search (all sections)
Output format
OpenServer logo
[printable version]

sigtrap(3)	       Perl Programmers Reference Guide		    sigtrap(3)

NAME
       sigtrap - Perl pragma to enable simple signal handling

SYNOPSIS
	   use sigtrap;
	   use sigtrap qw(stack-trace old-interface-signals);  # equivalent
	   use sigtrap qw(BUS SEGV PIPE ABRT);
	   use sigtrap qw(die INT QUIT);
	   use sigtrap qw(die normal-signals);
	   use sigtrap qw(die untrapped normal-signals);
	   use sigtrap qw(die untrapped normal-signals
			   stack-trace any error-signals);
	   use sigtrap 'handler' => \&my_handler, 'normal-signals';
	   use sigtrap qw(handler my_handler normal-signals
			   stack-trace error-signals);

DESCRIPTION
       The sigtrap pragma is a simple interface to installing signal handlers.
       You can have it install one of two handlers supplied by sigtrap itself
       (one which provides a Perl stack trace and one which simply "die()"s),
       or alternately you can supply your own handler for it to install.  It
       can be told only to install a handler for signals which are either
       untrapped or ignored.  It has a couple of lists of signals to trap,
       plus you can supply your own list of signals.

       The arguments passed to the "use" statement which invokes sigtrap are
       processed in order.  When a signal name or the name of one of sigtrap's
       signal lists is encountered a handler is immediately installed, when an
       option is encountered it affects subsequently installed handlers.

OPTIONS
       SIGNAL HANDLERS

       These options affect which handler will be used for subsequently
       installed signals.

       stack-trace
	   The handler used for subsequently installed signals outputs a Perl
	   stack trace to STDERR and then tries to dump core.  This is the
	   default signal handler.

       die The handler used for subsequently installed signals calls "die"
	   (actually "croak") with a message indicating which signal was
	   caught.

       handler your-handler
	   your-handler will be used as the handler for subsequently installed
	   signals.  your-handler can be any value which is valid as an
	   assignment to an element of %SIG.

       SIGNAL LISTS

       sigtrap has a few built-in lists of signals to trap.  They are:

       normal-signals
	   These are the signals which a program might normally expect to
	   encounter and which by default cause it to terminate.  They are
	   HUP, INT, PIPE and TERM.

       error-signals
	   These signals usually indicate a serious problem with the Perl
	   interpreter or with your script.  They are ABRT, BUS, EMT, FPE,
	   ILL, QUIT, SEGV, SYS and TRAP.

       old-interface-signals
	   These are the signals which were trapped by default by the old sig-
	   trap interface, they are ABRT, BUS, EMT, FPE, ILL, PIPE, QUIT,
	   SEGV, SYS, TERM, and TRAP.  If no signals or signals lists are
	   passed to sigtrap, this list is used.

       For each of these three lists, the collection of signals set to be
       trapped is checked before trapping; if your architecture does not
       implement a particular signal, it will not be trapped but rather
       silently ignored.

       OTHER

       untrapped
	   This token tells sigtrap to install handlers only for subsequently
	   listed signals which aren't already trapped or ignored.

       any This token tells sigtrap to install handlers for all subsequently
	   listed signals.  This is the default behavior.

       signal
	   Any argument which looks like a signal name (that is,
	   "/^[A-Z][A-Z0-9]*$/") indicates that sigtrap should install a han-
	   dler for that name.

       number
	   Require that at least version number of sigtrap is being used.

EXAMPLES
       Provide a stack trace for the old-interface-signals:

	   use sigtrap;

       Ditto:

	   use sigtrap qw(stack-trace old-interface-signals);

       Provide a stack trace on the 4 listed signals only:

	   use sigtrap qw(BUS SEGV PIPE ABRT);

       Die on INT or QUIT:

	   use sigtrap qw(die INT QUIT);

       Die on HUP, INT, PIPE or TERM:

	   use sigtrap qw(die normal-signals);

       Die on HUP, INT, PIPE or TERM, except don't change the behavior for
       signals which are already trapped or ignored:

	   use sigtrap qw(die untrapped normal-signals);

       Die on receipt one of an of the normal-signals which is currently
       untrapped, provide a stack trace on receipt of any of the error-sig-
       nals:

	   use sigtrap qw(die untrapped normal-signals
			   stack-trace any error-signals);

       Install my_handler() as the handler for the normal-signals:

	   use sigtrap 'handler', \&my_handler, 'normal-signals';

       Install my_handler() as the handler for the normal-signals, provide a
       Perl stack trace on receipt of one of the error-signals:

	   use sigtrap qw(handler my_handler normal-signals
			   stack-trace error-signals);

perl v5.8.8			  2006-06-14			    sigtrap(3)
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server OpenServer

List of man pages available for OpenServer

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net