sane-gt68xx man page on Knoppix

Man page or keyword search:  
man Server   3132 pages
apropos Keyword Search (all sections)
Output format
Knoppix logo
[printable version]

sane-gt68xx(5)		 SANE Scanner Access Now Easy		sane-gt68xx(5)

NAME
       sane-gt68xx - SANE backend for GT-68XX based USB flatbed scanners

DESCRIPTION
       The  sane-gt68xx	 library  implements  a SANE (Scanner Access Now Easy)
       backend that provides access to	USB  flatbed  scanners	based  on  the
       Grandtech  GT-6801 and GT-6816 chips.  A list of supported scanners can
       be      found	  on	  the	   gt68xx      backend	     homepage:
       http://www.meier-geinitz.de/sane/gt68xx-backend/.

       This is BETA software. Especially if you test new or untested scanners,
       keep your hand at the scanner's plug and unplug it, if the  head	 bumps
       at the end of the scan area.

       If  you own a scanner other than the ones listed on the gt68xx homepage
       that works with this backend, please let me know this  by  sending  the
       scanner's exact model name and the USB vendor and device ids (e.g. from
       sane-find-scanner or syslog) to me. Even if the scanner's name is  only
       slightly	 different from the models already listed as supported, please
       let me know.

       If you own a scanner that isn't detected by the gt68xx backend but  has
       a  GT-6801  or  GT-6816	chipset, you can try to add it to the backend.
       Have	a     look	at	the	 following	web	 page:
       http://www.meier-geinitz.de/sane/gt68xx-backend/adding.html

LIBUSB ISSUES
       Please  use  libusb-0.1.8 or later. Without libusb or with older libusb
       versions all kinds of trouble can be expected. The  scanner  should  be
       found by sane-find-scanner without further actions. For setting permis‐
       sions and general USB information looks at sane-usb(5).

FIRMWARE FILE
       You need a firmware file for your scanner. That's a small file contain‐
       ing  software  that will be uploaded to the scanner's memory. It's usu‐
       ally named *.usb, e.g.  PS1fw.usb.  It comes  on	 the  installation  CD
       that  was provided by the manufacturer, but it may be packaged together
       with the installation program in an .exe file. For Mustek scanners, the
       file  can  be  downloaded  from	the gt68xx backend homepage. For other
       scanners, check the CD for .usb files. If you only  find	 *.cab	files,
       try  cabextract	to  unpack. If everything else fails, you must install
       the Windows driver and get the firmware from there (usually in the win‐
       dows/system  or	system32  directories).	 Put  that  firmware file into
       /usr/share/sane/gt68xx/.	 Make sure that it's readable by everyone.

CONFIGURATION
       The contents of the gt68xx.conf file is a list of usb lines  containing
       vendor  and  product  ids that correspond to USB scanners. The file can
       also contain option lines.  Empty lines and lines starting with a  hash
       mark  (#)  are ignored.	The scanners are autodetected by usb vendor_id
       product_id statements which  are	 already  included  into  gt68xx.conf.
       "vendor_id"  and "product_id" are hexadecimal numbers that identify the
       scanner.

       The override, firmware, vendor, model, and afe options must  be	placed
       after the usb line they refer to.

       Option  override	 is  used  to  override	 the default model parameters.
       That's necessary for some scanners that use the same vendor/product ids
       but  are	 different. For these scanners there are already commented out
       override lines in  the  configuration  file.   override	mustek-scanex‐
       press-1200-ub-plus  is  necessary  for  the  Mustek Scanexpress 1200 UB
       Plus, the Medion/Lifetec/Tevion LT 9452, and the Trust Compact Scan USB
       19200.	override  artec-ultima-2000 is used for the Artec Ultima 2000,
       the Boeder SmartScan Slim Edition, the Medion/ Lifetec/ Tevion/	Cytron
       MD/LT  9385,  the  Medion/  Lifetec/ Tevion MD 9458, and the Trust Flat
       Scan USB 19200.	override mustek-bearpaw-2400-cu is necessary  for  the
       Mustek  BearPaw	2400  CU  and the Fujitsu 1200CUS. The override option
       must be the first one after the usb line.

       Option firmware selects the name and path of the	 firmware  file.  It's
       only  necessary	if the default (or override) doesn't work. The default
       firmware directory is /usr/share/sane/gt68xx/.  You may need to	create
       this  directory. If you want to place the firmware files at a different
       path, use a firmware line.

       The vendor and model options are not absolutely necessary but for  con‐
       venience.  Quite	 a  lot of scanners from different manufacturers share
       the same vendor/product ids so you can set the "correct" name here.

       The afe option allows to set custom offset and gain values for the Ana‐
       log  FrontEnd  of the scanner. This option can be either used to select
       the AFE values if automatic coarse calibration is disabled, or to  make
       automatic coarse calibration faster. For the latter usage, enable debug
       level 3 (see below), scan an image and look for debug line string  with
       "afe".  Copy  this line to gt68xx.conf.	The option has six parameters:
       red offset, red gain, green offset, green gain, blue offset,  and  blue
       gain.

       A sample configuration file is shown below:

	      usb 0x05d8 0x4002
	      override "mustek-scanexpress-1200-ub-plus"
	      firmware "/opt/gt68xx/SBfw.usb"
	      vendor "Trust"
	      model "Compact Scan USB 19200"
	      afe 0x20 0x02 0x22 0x03 0x1f 0x04

FILES
       /etc/sane.d/gt68xx.conf
	      The   backend   configuration  file  (see	 also  description  of
	      SANE_CONFIG_DIR below).

       /usr/lib/arch_triplet/sane/libsane-gt68xx.a
	      The static library implementing this backend.

       /usr/lib/arch_triplet/sane/libsane-gt68xx.so
	      The shared library implementing this backend (present on systems
	      that support dynamic loading).

ENVIRONMENT
       SANE_CONFIG_DIR
	      This environment variable specifies the list of directories that
	      may contain the configuration file.  Under UNIX, the directories
	      are  separated  by a colon (`:'), under OS/2, they are separated
	      by a semi-colon (`;').  If this variable is not set, the config‐
	      uration  file is searched in two default directories: first, the
	      current working directory (".") and then in /etc/sane.d.	If the
	      value  of the environment variable ends with the directory sepa‐
	      rator character, then the default directories are searched after
	      the  explicitly  specified  directories.	 For  example, setting
	      SANE_CONFIG_DIR to "/tmp/config:" would  result  in  directories
	      "tmp/config",  ".",  and	"/etc/sane.d"  being searched (in this
	      order).

       SANE_DEBUG_GT68XX
	      If the library was compiled with	debug  support	enabled,  this
	      environment  variable controls the debug level for this backend.
	      Higher debug levels increase the verbosity of the output. If the
	      debug  level  is	set  to 1 or higher, some debug options become
	      available that are normally hidden. Handle them with care.

	      Example: export SANE_DEBUG_GT68XX=4

SEE ALSO
       sane(7),	   sane-usb(5),	   sane-artec_eplus48u(5)     sane-plustek(5),
       sane-ma1509(5), sane-mustek_usb(5), sane-mustek(5), sane-mustek_pp(5)
       /usr/share/doc/libsane/gt68xx/gt68xx.CHANGES
       http://www.meier-geinitz.de/sane/gt68xx

AUTHOR
       Henning Meier-Geinitz <henning@meier-geinitz.de>
       The  original  gt68xx  driver  was  written  by	Sergey Vlasov, Andreas
       Nowack, and David Stevenson. Thanks for sending patches	and  answering
       questions to them and all the other contributors.

BUGS
       The first few lines of the image are garbage for the 2400 TA Plus.

       Interpolation  should be used instead of just copying data, when the X-
       and Y-resolution differ.

       Support for buttons is missing.

       More detailed bug information is available at the gt68xx backend	 home‐
       page  http://www.meier-geinitz.de/sane/gt68xx-backend/.	Please contact
       us    if	    you	    find     a	   bug	   or	  missing     feature:
       <sane-devel@lists.alioth.debian.org>.  Please  send a debug log if your
       scanner isn't detected correctly (see SANE_DEBUG_GT68XX above).

				  13 Jul 2008			sane-gt68xx(5)
[top]

List of man pages available for Knoppix

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net