RTFPS(4) BSD Programmer's Manual RTFPS(4)NAMErtfps - multiplexing serial communications interface
SYNOPSIS
rtfps0 at isa? port 0x1230 irq 10
com* at rtfps? slave ?
or
pccom* at rtfps? slave ?
DESCRIPTION
The rtfps driver provides support for IBM RT PC boards that multiplex to-
gether up to four RS-232C (CCITT V.28) or RS-422A communications inter-
faces.
Each rtfps device is the master device for up to four com devices. The
kernel configuration specifies these com devices as slave devices of the
rtfps device, as shown in SYNOPSIS. The port specification for the rtfps
device is used to compute the base addresses for the com subdevices.
FILES
/dev/tty0?
SEE ALSOcom(4), intro(4), isa(4)HISTORY
The rtfps driver was written by Charles Hannum, based on the ast driver.
BUGS
The rtfps driver is unlikely to work on non-PCI machines. The ISA bus
only asserts 10 I/O address lines, and this is not enough.
Even on PCI machines, some address conflicts have been observed. On one
machine, the second port always conflicted with something (though it's
not clear what) and caused strange results. Disabling the second port in
the kernel config allowed the other three ports to function correctly.
MirOS BSD #10-current August 7, 1994 1