rtc man page on Archlinux

Man page or keyword search:  
man Server   11224 pages
apropos Keyword Search (all sections)
Output format
Archlinux logo
[printable version]

RTC(4)			   Linux Programmer's Manual			RTC(4)

NAME
       rtc - real-time clock

SYNOPSIS
       #include <linux/rtc.h>

       int ioctl(fd, RTC_request, param);

DESCRIPTION
       This is the interface to drivers for real-time clocks (RTCs).

       Most  computers	have one or more hardware clocks which record the cur‐
       rent "wall clock" time.	These are called "Real	Time  Clocks"  (RTCs).
       One  of	these  usually	has battery backup power so that it tracks the
       time even while the computer is turned off.  RTCs often provide	alarms
       and other interrupts.

       All  i386  PCs,	and ACPI-based systems, have an RTC that is compatible
       with the Motorola MC146818 chip on the original PC/AT.  Today  such  an
       RTC  is usually integrated into the mainboard's chipset (south bridge),
       and uses a replaceable coin-sized backup battery.

       Non-PC systems, such as embedded systems	 built	around	system-on-chip
       processors,  use	 other	implementations.  They usually won't offer the
       same functionality as the RTC from a PC/AT.

   RTC vs system clock
       RTCs should not be confused with the system clock, which is a  software
       clock  maintained  by  the kernel and used to implement gettimeofday(2)
       and time(2), as well as setting timestamps on files, and	 so  on.   The
       system  clock  reports  seconds	and  microseconds since a start point,
       defined to be the POSIX Epoch: 1970-01-01 00:00:00 +0000	 (UTC).	  (One
       common  implementation  counts timer interrupts, once per "jiffy", at a
       frequency of 100, 250, or 1000 Hz.)  That is, it is supposed to	report
       wall clock time, which RTCs also do.

       A  key  difference between an RTC and the system clock is that RTCs run
       even when the system is in a low power state (including "off"), and the
       system clock can't.  Until it is initialized, the system clock can only
       report time since system boot ... not since the	POSIX  Epoch.	So  at
       boot time, and after resuming from a system low power state, the system
       clock will often be set to the current wall clock time  using  an  RTC.
       Systems	without	 an  RTC  need	to  set the system clock using another
       clock, maybe across the network or by entering that data manually.

   RTC functionality
       RTCs can be read and written with  hwclock(8),  or  directly  with  the
       ioctl requests listed below.

       Besides	tracking the date and time, many RTCs can also generate inter‐
       rupts

       *  on every clock update (i.e., once per second);

       *  at periodic intervals with a frequency that can be set to any power-
	  of-2 multiple in the range 2 Hz to 8192 Hz;

       *  on reaching a previously specified alarm time.

       Each  of those interrupt sources can be enabled or disabled separately.
       On many systems, the alarm interrupt can	 be  configured	 as  a	system
       wakeup  event,  which can resume the system from a low power state such
       as Suspend-to-RAM (STR, called S3 in ACPI systems), Hibernation (called
       S4  in  ACPI  systems),	or even "off" (called S5 in ACPI systems).  On
       some systems, the  battery  backed  RTC	can't  issue  interrupts,  but
       another one can.

       The /dev/rtc (or /dev/rtc0, /dev/rtc1, etc.)  device can be opened only
       once (until it  is  closed)  and	 it  is	 read-only.   On  read(2)  and
       select(2)  the calling process is blocked until the next interrupt from
       that RTC is received.  Following the interrupt, the process can read  a
       long  integer,  of which the least significant byte contains a bit mask
       encoding the types of interrupt that occurred, while  the  remaining  3
       bytes contain the number of interrupts since the last read(2).

   ioctl(2) interface
       The  following  ioctl(2)	 requests are defined on file descriptors con‐
       nected to RTC devices:

       RTC_RD_TIME
	      Returns this RTC's time in the following structure:

		  struct rtc_time {
		      int tm_sec;
		      int tm_min;
		      int tm_hour;
		      int tm_mday;
		      int tm_mon;
		      int tm_year;
		      int tm_wday;     /* unused */
		      int tm_yday;     /* unused */
		      int tm_isdst;    /* unused */
		  };

	      The fields in this structure have the same meaning and ranges as
	      for  the tm structure described in gmtime(3).  A pointer to this
	      structure should be passed as the third ioctl(2) argument.

       RTC_SET_TIME
	      Sets this RTC's time to  the  time  specified  by	 the  rtc_time
	      structure pointed to by the third ioctl(2) argument.  To set the
	      RTC's time the  process  must  be	 privileged  (i.e.,  have  the
	      CAP_SYS_TIME capability).

       RTC_ALM_READ, RTC_ALM_SET
	      Read  and set the alarm time, for RTCs that support alarms.  The
	      alarm interrupt must be separately enabled or disabled using the
	      RTC_AIE_ON,  RTC_AIE_OFF	requests.  The third ioctl(2) argument
	      is a pointer to an rtc_time structure.  Only the tm_sec, tm_min,
	      and tm_hour fields of this structure are used.

       RTC_IRQP_READ, RTC_IRQP_SET
	      Read  and	 set  the  frequency for periodic interrupts, for RTCs
	      that support periodic interrupts.	 The periodic  interrupt  must
	      be   separately	enabled	 or  disabled  using  the  RTC_PIE_ON,
	      RTC_PIE_OFF  requests.   The  third  ioctl(2)  argument  is   an
	      unsigned long * or an unsigned long, respectively.  The value is
	      the frequency in interrupts per second.  The  set	 of  allowable
	      frequencies  is  the  multiples  of  two in the range 2 to 8192.
	      Only a privileged process (i.e., one having the CAP_SYS_RESOURCE
	      capability)  can	set  frequencies  above the value specified in
	      /proc/sys/dev/rtc/max-user-freq.	(This file contains the	 value
	      64 by default.)

       RTC_AIE_ON, RTC_AIE_OFF
	      Enable  or  disable  the	alarm interrupt, for RTCs that support
	      alarms.  The third ioctl(2) argument is ignored.

       RTC_UIE_ON, RTC_UIE_OFF
	      Enable or disable the interrupt on every clock update, for  RTCs
	      that support this once-per-second interrupt.  The third ioctl(2)
	      argument is ignored.

       RTC_PIE_ON, RTC_PIE_OFF
	      Enable or disable the periodic interrupt, for RTCs that  support
	      these  periodic  interrupts.   The  third	 ioctl(2)  argument is
	      ignored.	Only  a	 privileged  process  (i.e.,  one  having  the
	      CAP_SYS_RESOURCE	capability)  can enable the periodic interrupt
	      if the frequency is currently set above the value	 specified  in
	      /proc/sys/dev/rtc/max-user-freq.

       RTC_EPOCH_READ, RTC_EPOCH_SET
	      Many  RTCs  encode the year in an 8-bit register which is either
	      interpreted as an 8-bit binary number or as a  BCD  number.   In
	      both  cases,  the	 number	 is interpreted relative to this RTC's
	      Epoch.  The RTC's Epoch is initialized to 1900 on	 most  systems
	      but  on  Alpha  and  MIPS	 it might also be initialized to 1952,
	      1980, or 2000, depending on the value of an RTC register for the
	      year.   With  some RTCs, these operations can be used to read or
	      to set the RTC's Epoch, respectively.  The third ioctl(2)	 argu‐
	      ment  is a unsigned long * or a unsigned long, respectively, and
	      the value returned (or assigned) is the Epoch.  To set the RTC's
	      Epoch   the   process   must   be	 privileged  (i.e.,  have  the
	      CAP_SYS_TIME capability).

       RTC_WKALM_RD, RTC_WKALM_SET
	      Some RTCs support a more powerful alarm interface,  using	 these
	      ioctls to read or write the RTC's alarm time (respectively) with
	      this structure:

		  struct rtc_wkalrm {
		      unsigned char enabled;
		      unsigned char pending;
		      struct rtc_time time;
		  };

	      The enabled flag is used to enable or disable the	 alarm	inter‐
	      rupt,  or	 to  read  its current status; when using these calls,
	      RTC_AIE_ON and RTC_AIE_OFF are not used.	The  pending  flag  is
	      used  by	RTC_WKALM_RD  to  report  a pending interrupt (so it's
	      mostly useless on Linux, except when talking to the RTC  managed
	      by  EFI  firmware).  The time field is as used with RTC_ALM_READ
	      and RTC_ALM_SET except that the  tm_mday,	 tm_mon,  and  tm_year
	      fields  are  also	 valid.	 A pointer to this structure should be
	      passed as the third ioctl(2) argument.

FILES
       /dev/rtc, /dev/rtc0,  /dev/rtc1,	 etc:  RTC  special  character	device
       files.

       /proc/driver/rtc: status of the (first) RTC.

NOTES
       When  the  kernel's system time is synchronized with an external refer‐
       ence using adjtimex(2) it will update  a	 designated  RTC  periodically
       every  11  minutes.  To do so, the kernel has to briefly turn off peri‐
       odic interrupts; this might affect programs using that RTC.

       An RTC's Epoch has nothing to do with the POSIX	Epoch  which  is  used
       only for the system clock.

       If  the year according to the RTC's Epoch and the year register is less
       than 1970 it is assumed to be 100 years later, that  is,	 between  2000
       and 2069.

       Some RTCs support "wildcard" values in alarm fields, to support scenar‐
       ios like periodic alarms at fifteen minutes after every hour, or on the
       first  day  of  each  month.  Such usage is nonportable; portable user-
       space code only expects a single alarm interrupt, and will either  dis‐
       able or reinitialize the alarm after receiving it.

       Some  RTCs  support periodic interrupts with periods that are multiples
       of a second rather than fractions of a second;  multiple	 alarms;  pro‐
       grammable  output clock signals; nonvolatile memory; and other hardware
       capabilities that are not currently exposed by this API.

SEE ALSO
       date(1),	 adjtimex(2),  gettimeofday(2),	  settimeofday(2),   stime(2),
       time(2), gmtime(3), time(7), hwclock(8)

       Documentation/rtc.txt in the Linux kernel source tree

COLOPHON
       This  page  is  part of release 3.65 of the Linux man-pages project.  A
       description of the project, and information about reporting  bugs,  can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2010-02-25				RTC(4)
[top]

List of man pages available for Archlinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net