rcmgr, rc.config - Gets, sets, or deletes runtime configuration vari‐
ables stored in the files /etc/rc.config, /etc/rc.config.common, and
/usr/sbin/rcmgr [-c | -s] delete variable
/usr/sbin/rcmgr [-c | -s] get variable [value]
/usr/sbin/rcmgr [-c | -s] mget variable [value]
/usr/sbin/rcmgr [-c | -s] set variable value
/usr/sbin/rcmgr [-h | -n] [member_number] get variable [value]
/usr/sbin/rcmgr [-h | -n] [member_number] mget variable [value]
/usr/sbin/rcmgr [-h | -n] [member_number] set variable value
/usr/sbin/rcmgr [-h | -n] [member_number] delete variable
The rcmgr command is used with at most one of the options -c, -s, -h,
or -n. The options -c and -s are called file options and -h is called
the host option. Operations are performed on /etc/rc.config.common,
the clusterwide configuration file. Operations are performed on
/etc/rc.config.site, the sitewide configuration file. Operations are
performed on the /etc/rc.config file for the cluster member whose mem‐
ber ID corresponds to member_number. Operations are performed only on
the node-specific file.
The rcmgr command retrieves, sets, or deletes runtime configuration
variables stored in the hierarchy of configuration files: /etc/rc.con‐
fig, /etc/rc.config.common, and /etc/rc.config.site. These three files
are together referred to as /etc/rc.config*. The runtime variables are
used to configure various subsystems (for example, NFS or NTP) via
scripts in the /sbin/init.d directory.
You should always use rcmgr to make changes to the files. This will
preserve the correct syntax in the files. A lock file, /etc/rcmgr.lock
prevents multiple access to the data files.
These files are used as follows: On a standalone system, configuration
variables in both /etc/rc.config and /etc/rc.config.common are used to
configure the system. In a cluster, configuration variables defined in
the /etc/rc.config.common file are shared by all cluster members.
Because the /etc/rc.config file is defined as a context-dependent sym‐
bolic link (and must be maintained as such), there is a distinct
/etc/rc.config file for each member in a cluster. The configuration
variable settings in any given member's /etc/rc.config file apply only
to that member. You can also create a sitewide configuration file
named /etc/rc.config.site and distribute it among systems in a local
area network or at a particular site. Note that Tru64 UNIX does not
ship with such a file. If you decide to use a sitewide configuration
file, you must create it, copy it to /etc/rc.config.site on each par‐
ticipating system, and edit each participating system's /etc/rc.config
file to include the following command just before the similar line that
# Read in the cluster sitewide attributes before overriding them
# with the clusterwide and member-specific values. #
. /etc/rc.config.site #
The hierarchy of the /etc/rc.config* files allows an administrator to
define configuration variables consistently over all nodes within a
local area network and within a cluster. Variables that are the same
for all machines on a LAN can be defined in a sitewide file. Variables
that are not specific to a given machine and are (or could be) shared
by all members of a cluster should be defined in the clusterwide file.
Finally, variables specific to a given machine's hardware configuration
should be defined in the machine-specific file (or each machine-spe‐
cific file in a cluster).
Command options either search the file hierarchy or operate directly on
the the appropriate file as follows:
Option get mget set delete
-s direct direct direct direct
-c direct direct direct direct
-n direct direct direct direct
-h hierarchy hierarchy direct direct
Null (no option hierarchy hierarchy hierarchy direct
For example, the -h and -n options do exactly the same thing for set
and delete operations. For get and mget operations, the -n option
operates only on the the rc.config file. Consider the following com‐
mand: # rcmgr-h 2 get NUM_TCPD
If the variable NUM_TCPD is not defined in the rc.config file, the
rcmgr command searches the rc.config.common file next. If the value is
found in the rc.config.common file, it is returned. If not, the rcmgr
command searches the rc.config.site file.
In contrast, you can specify the -n option as follows: # rcmgr-n 2 get
In this case, if NUM_TCPD is not defined in the rc.config file, then no
value is returned and no other files in the hierarchy are searched.
The operations are defined in the following section.
The get operation returns one of the following: the value of variable
defined in one of the /etc/rc.config* files, value, or null. If the
-coption is specified, the command looks only in the /etc/rc.con‐
fig.common file. If the -s option is specified, the command looks only
in the /etc/rc.config.site file. If the -h member_number option is
specified, the command returns the value as defined for the cluster
member whose member ID corresponds to member_number. If the -n mem‐
ber_number option is specified, the command looks only in the
The get operation uses a standard search order: it first looks
in /etc/rc.config; it then looks in /etc/rc.config.common;
finally it looks in /etc/rc.config.site.
If no file or host option is specified, the command finds the
first definition of variable, using the standard search order.
If the variable is not found in any of the files, the command
returns value, if specified; otherwise it returns null.
If the value of a variable is set to "" (null), then an rcmgr
get operation on that variable will return an empty string.
With no option specified, the mget operation returns all the
variables defined in any of the /etc/rc.config* files, using the
standard search order. If a variable is defined in more than one
of the files, the first value encountered is returned. If -h
member_number is specified, the operation functions identically,
except it returns the values as defined for the cluster member
whose member ID corresponds to member_number, using the standard
If the -n member_number option is specified, the command looks
only in the /etc/rc.config file.
The values are output one per line in the form variable=value.
If no option is specified, the set operation uses the standard
search order to set variable to value in the first /etc/rc.con‐
fig* file in which it finds a definition of variable. If no def‐
inition is found, the set is done in the local /etc/rc.config
If -c or -s is specified, the set is done in /etc/rc.config.com‐
mon or /etc/rc.config.site, respectively. If -h member_number is
specified, the set is done in the /etc/rc.config file for the
cluster member whose member ID corresponds to member_number. If
no option is specified, the delete operation removes variable
from the /etc/rc.config file. The standard search order is not
used. If -c or -s is specified, the delete is done in the
/etc/rc.config.common or /etc/rc.config.site file, respectively.
If -h member_number or -n member_number is specified, the delete
is done in the /etc/rc.config file for the cluster member whose
member ID corresponds to member_number.
If there is an error in an argument passed to rcmgr, or if a file
option was specified but the file does not exist, rcmgr returns an
error message and aborts execution with the exit value 1.
This example sets the variable HOSTNAME to yukio in the /etc/rc.config
file. rcmgr set HOSTNAME yukio This example sets the variable IFCON‐
FIG_0 to 126.96.36.199 netmask 255.255.252.0 in the /etc/rc.config file.
rcmgr set IFCONFIG_0 188.8.131.52 netmask 255.255.252.0 This example
displays the value of the variable NIS_ARGS in the first definition of
NIS_ARGS it finds using the standard search order. If no value is found
in any of the /etc/rc.config* files, the command returns null. rcmgr
Startup scripts can use the get operation to provide values to vari‐
ables as in the following examples. This example sets the value of
netdevs to the value of MAX_NETDEVS in the /etc/rc.config file on node
barney. If no value is defined, it sets netdevs to 24. netdevs=`rcmgr
-h barney get MAX_NETDEVS 24` This example sets num_nfsd to 4 if
NUM_NFSD is not defined in any of the /etc/rc.config* files. Otherwise,
it sets num_nfsd to the value specified in the first definition of
NUM_NFSD it finds using the standard search order. num_nfsd=`rcmgr get
NUM_NFSD 4` This example deletes the definition of the variable NET‐
DEV_1 from the clusterwide file /etc/rc.config.common. rcmgr-c delete
Prevents applications from accessing the data files concurrently, which
could cause data corruption.