RADIO(4) BSD Programmer's Manual RADIO(4)NAMEradio - device-independent radio driver layer
SYNOPSIS
radio* at az?
radio* at bktr?
radio* at fms?
radio* at gtp?
radio* at rt?
radio* at rtii?
radio* at sfr?
radio* at sf2r?
radio* at udsbr?
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/radioio.h>
DESCRIPTION
The radio driver provides support for various FM radio cards. It provides
an uniform programming interface layer above different underlying radio
hardware drivers.
For radio tuner controlling there is a single device file available:
/dev/radio.
The following ioctl(2) commands are supported:
RIOCSSRCH (int)
This command assumes that a signal search is required and gives
direction of search to the driver - 0 to search down and any
non-zero value to search up.
RIOCGINFO (struct radio_info)
RIOCSINFO (struct radio_info)
Get or set the current hardware device information into the
struct radio_info structure.
struct radio_info {
int mute;
int volume;
int stereo;
int rfreq; /* reference frequency */
int lock; /* locking field strength */
u_int32_t freq; /* in kHz */
u_int32_t caps; /* card capabilities */
#define RADIO_CAPS_DETECT_STEREO (1<<0)
#define RADIO_CAPS_DETECT_SIGNAL (1<<1)
#define RADIO_CAPS_SET_MONO (1<<2)
#define RADIO_CAPS_HW_SEARCH (1<<3)
#define RADIO_CAPS_HW_AFC (1<<4)
#define RADIO_CAPS_REFERENCE_FREQ (1<<5)
#define RADIO_CAPS_LOCK_SENSITIVITY (1<<6)
#define RADIO_CARD_TYPE (0xFF<<16)
u_int32_t info;
#define RADIO_INFO_STEREO (1<<0)
#define RADIO_INFO_SIGNAL (1<<1)
};
The mute field is a boolean.
The volume field holds the card volume information and can be at
most 255.
The stereo field is a boolean.
The rfreq holds information about the card reference frequency
(not all cards support this feature).
The lock field holds information about the card locking field
strength during an automatic search for cards that support this
feature.
The freq field is the frequency in kHz the card is tuned to.
The caps field is read-only and describes the card capabilities.
The capabilities can have the following values:
RADIO_CAPS_DETECT_STEREO
The device can determine if it is tuned to a stereo sig-
nal.
RADIO_CAPS_DETECT_SIGNAL
The device can determine if it is tuned or not.
RADIO_CAPS_SET_MONO
The device is capable of forcibly setting its output to
mono.
RADIO_CAPS_HW_SEARCH
The device can do hardware search.
RADIO_CAPS_HW_AFC
The device has an internal hardware automatic frequency
control.
RADIO_CAPS_REFERENCE_FREQ
The device allows changing the reference frequency of a
received signal.
RADIO_CAPS_LOCK_SENSITIVITY
The device allows changing the station lock sensitivity
used during search operation.
RADIO_CARD_TYPE
Some cards have several different incarnations. This al-
lows the variant of the card to be determined. Currently
not used.
The info field is read-only and describes the current state of
the card - tuned/not tuned, stereo signal/mono signal.
RADIO_INFO_STEREO
Informs whether the device receives a stereo or mono sig-
nal.
RADIO_INFO_SIGNAL
Informs whether the device receives a valid signal or
noise.
CHIPSETS
LM700x is a frequency synthesizer IC. The LM700x is programmed through a
24-bit write-only shift register. The first 14 bits are frequency data.
The next 2 bits are LSI test bits, and should always be zero. The next 4
bits are band data and time base data. They can be programmed to force a
given reference frequency, or they can be set to zero and the next 3 bits
can be used to set the reference frequency. The final bit selects the di-
vider selection, which is 1 for FM and 0 for AM. The LM700x chips are
used in az(4) and rt(4) cards.
The TEA5757; TEA5759 is a 44-pin integrated AM/FM stereo radio circuit.
The radio part is based on the TEA5712. The TEA5757 is used in FM-
standards in which the local oscillator frequency is above the radio fre-
quency (e.g. European and American standards). The TEA5759 is the version
in which the oscillator frequency is below the radio frequency (e.g.
Japanese standards). To conform with the Japanese standards, it is neces-
sary to set the flags' least significant bit to 1. The TEA5757; TEA5759
has a 25-bit read-write shift register. The TEA5757 chips are used in
gtp(4), rtii(4), sf2r(4) and fms(4) cards.
The TC9216P, TC9217P and TC9217F are high speed PLL-LSI with built-in 2
modulus prescaler. Each function is controlled through 3 serial bus lines
(DATA, CLOCK and PERIOD) by the data setting to a pair of 24-bit regis-
ters, total of 48 bits. Address 8 bits and data 24 bits, total of 32
bits, are transferred in serial at the same time. The TC921x chips are
used in sfr(4) cards.
FILES
/dev/radio
SEE ALSOioctl(2), az(4), bktr(4), fms(4), gtp(4), intro(4), rt(4), rtii(4),
sf2r(4), sfr(4), udsbr(4), radio(9)HISTORY
The radio device driver appeared in OpenBSD 3.0.
AUTHORS
The radio driver was written by Vladimir Popov <jumbo@narod.ru> and
Maxim Tsyplakov <tm@oganer.net>. The man page was written by
Vladimir Popov <jumbo@narod.ru>.
MirOS BSD #10-current October 20, 2001 2