RACOONCTL(8) BSD System Manager's Manual RACOONCTL(8)NAMEracoonctl — racoon administrative control tool
SYNOPSISracoonctl reload-config
racoonctl show-schedule
racoonctl [-l [-l]] show-sa [isakmp|esp|ah|ipsec]
racoonctl flush-sa [isakmp|esp|ah|ipsec]
racoonctl delete-sa saopts
racoonctl establish-sa [-u identity] saopts
racoonctl vpn-connect [-u -identity] vpn_gateway
racoonctl vpn-disconnect vpn_gateway
racoonctl show-event [-l]
DESCRIPTIONracoonctl is used to control racoon(8) operation, if ipsec-tools was con‐
figured with adminport support. Communication between racoonctl and
racoon(8) is done through a UNIX socket. By changing the default mode
and ownership of the socket, you can allow non-root users to alter
racoon(8) behavior, so do that with caution.
The following commands are available:
reload-config
This should cause racoon(8) to reload its configuration file.
This seems completely broken at the time this man page is writ‐
ten.
show-schedule
Unknown command.
show-sa [isakmp|esp|ah|ipsec]
Dump the SA: All the SAs if no SA class is provided, or either
ISAKMP SAs, IPsec ESP SAs, IPsec AH SAs, or all IPsec SAs. Use
-l to increase verbosity.
flush-sa [isakmp|esp|ah|ipsec]
is used to flush all SAs if no SA class is provided, or a class
of SAs, either ISAKMP SAs, IPsec ESP SAs, IPsec AH SAs, or all
IPsec SAs.
establish-sa [-u username] saopts
Establish an SA, either an ISAKMP SA, IPsec ESP SA, or IPsec AH
SA. The optional -u username can be used when establishing an
ISAKMP SA while hybrid auth is in use. racoonctl will prompt you
for the password associated with username and these credentials
will be used in the Xauth exchange.
saopts has the following format:
isakmp {inet|inet6} src dst
{esp|ah} {inet|inet6} src/prefixlen/port dst/prefixlen/port
{icmp|tcp|udp|any}
vpn-connect [-u username] vpn_gateway
This is a particular case of the previous command. It will
establish an ISAKMP SA with vpn_gateway.
delete-sa saopts
Delete an SA, either an ISAKMP SA, IPsec ESP SA, or IPsec AH SA.
vpn-disconnect vpn_gateway
This is a particular case of the previous command. It will kill
all SAs associated with vpn_gateway.
show-event [-l]
Dump all events reported by racoon(8), then quit. The -l flag
causes racoonctl to not stop once all the events have been read,
but rather to loop awaiting and reporting new events.
Command shortcuts are available:
rc reload-config
ss show-sa
sc show-schedule
fs flush-sa
ds delete-sa
es establish-sa
vc vpn-connect
vd vpn-disconnect
se show-event
RETURN VALUES
The command should exit with 0 on success, and non-zero on errors.
FILES
/var/racoon/racoon.sock or
/var/run/racoon.sock racoon(8) control socket.
SEE ALSOipsec(4), racoon(8)HISTORY
Once was kmpstat in the KAME project. It turned into racoonctl but
remained undocumented for a while. Emmanuel Dreyfus ⟨manu@NetBSD.org⟩
wrote this man page.
BSD November 16, 2004 BSD
