ps man page on Archlinux

Printed from http://www.polarhome.com/service/man/?qf=ps&af=0&tf=2&of=Archlinux

PS(1)				 User Commands				 PS(1)

NAME
       ps - report a snapshot of the current processes.

SYNOPSIS
       ps [options]

DESCRIPTION
       ps displays information about a selection of the active processes.  If
       you want a repetitive update of the selection and the displayed
       information, use top(1) instead.

       This version of ps accepts several kinds of options:

       1   UNIX options, which may be grouped and must be preceded by a dash.
       2   BSD options, which may be grouped and must not be used with a dash.
       3   GNU long options, which are preceded by two dashes.

       Options of different types may be freely mixed, but conflicts can
       appear.	There are some synonymous options, which are functionally
       identical, due to the many standards and ps implementations that this
       ps is compatible with.

       Note that "ps -aux" is distinct from "ps aux".  The POSIX and UNIX
       standards require that "ps -aux" print all processes owned by a user
       named "x", as well as printing all processes that would be selected by
       the -a option.  If the user named "x" does not exist, this ps may
       interpret the command as "ps aux" instead and print a warning.  This
       behavior is intended to aid in transitioning old scripts and habits.
       It is fragile, subject to change, and thus should not be relied upon.

       By default, ps selects all processes with the same effective user ID
       (euid=EUID) as the current user and associated with the same terminal
       as the invoker.	It displays the process ID (pid=PID), the terminal
       associated with the process (tname=TTY), the cumulated CPU time in
       [DD-]hh:mm:ss format (time=TIME), and the executable name (ucmd=CMD).
       Output is unsorted by default.

       The use of BSD-style options will add process state (stat=STAT) to the
       default display and show the command args (args=COMMAND) instead of the
       executable name.	 You can override this with the PS_FORMAT environment
       variable. The use of BSD-style options will also change the process
       selection to include processes on other terminals (TTYs) that are owned
       by you; alternately, this may be described as setting the selection to
       be the set of all processes filtered to exclude processes owned by
       other users or not on a terminal.  These effects are not considered
       when options are described as being "identical" below, so -M will be
       considered identical to Z and so on.

       Except as described below, process selection options are additive.  The
       default selection is discarded, and then the selected processes are
       added to the set of processes to be displayed.  A process will thus be
       shown if it meets any of the given selection criteria.

EXAMPLES
       To see every process on the system using standard syntax:
	  ps -e
	  ps -ef
	  ps -eF
	  ps -ely

       To see every process on the system using BSD syntax:
	  ps ax
	  ps axu

       To print a process tree:
	  ps -ejH
	  ps axjf

       To get info about threads:
	  ps -eLf
	  ps axms

       To get security info:
	  ps -eo euser,ruser,suser,fuser,f,comm,label
	  ps axZ
	  ps -eM

       To see every process running as root (real & effective ID) in user
       format:
	  ps -U root -u root u

       To see every process with a user-defined format:
	  ps -eo pid,tid,class,rtprio,ni,pri,psr,pcpu,stat,wchan:14,comm
	  ps axo stat,euid,ruid,tty,tpgid,sess,pgrp,ppid,pid,pcpu,comm
	  ps -Ao pid,tt,user,fname,tmout,f,wchan

       Print only the process IDs of syslogd:
	  ps -C syslogd -o pid=

       Print only the name of PID 42:
	  ps -p 42 -o comm=

SIMPLE PROCESS SELECTION
       a      Lift the BSD-style "only yourself" restriction, which is imposed
	      upon the set of all processes when some BSD-style (without "-")
	      options are used or when the ps personality setting is BSD-like.
	      The set of processes selected in this manner is in addition to
	      the set of processes selected by other means.  An alternate
	      description is that this option causes ps to list all processes
	      with a terminal (tty), or to list all processes when used
	      together with the x option.

       -A     Select all processes.  Identical to -e.

       -a     Select all processes except both session leaders (see getsid(2))
	      and processes not associated with a terminal.

       -d     Select all processes except session leaders.

       --deselect
	      Select all processes except those that fulfill the specified
	      conditions (negates the selection).  Identical to -N.

       -e     Select all processes.  Identical to -A.

       g      Really all, even session leaders.	 This flag is obsolete and may
	      be discontinued in a future release.  It is normally implied by
	      the a flag, and is only useful when operating in the sunos4
	      personality.

       -N     Select all processes except those that fulfill the specified
	      conditions (negates the selection).  Identical to --deselect.

       T      Select all processes associated with this terminal.  Identical
	      to the t option without any argument.

       r      Restrict the selection to only running processes.

       x      Lift the BSD-style "must have a tty" restriction, which is
	      imposed upon the set of all processes when some BSD-style
	      (without "-") options are used or when the ps personality
	      setting is BSD-like.  The set of processes selected in this
	      manner is in addition to the set of processes selected by other
	      means.  An alternate description is that this option causes ps
	      to list all processes owned by you (same EUID as ps), or to list
	      all processes when used together with the a option.

PROCESS SELECTION BY LIST
       These options accept a single argument in the form of a blank-separated
       or comma-separated list.	 They can be used multiple times.  For
       example: ps -p "1 2" -p 3,4

       -123   Identical to --pid 123.

       123    Identical to --pid 123.

       -C cmdlist
	      Select by command name.  This selects the processes whose
	      executable name is given in cmdlist.

       -G grplist
	      Select by real group ID (RGID) or name.  This selects the
	      processes whose real group name or ID is in the grplist list.
	      The real group ID identifies the group of the user who created
	      the process, see getgid(2).

       -g grplist
	      Select by session OR by effective group name.  Selection by
	      session is specified by many standards, but selection by
	      effective group is the logical behavior that several other
	      operating systems use.  This ps will select by session when the
	      list is completely numeric (as sessionsare).  Group ID numbers
	      will work only when some group names are also specified.	See
	      the -s and --group options.

       --Group grplist
	      Select by real group ID (RGID) or name.  Identical to -G.

       --group grplist
	      Select by effective group ID (EGID) or name.  This selects the
	      processes whose effective group name or ID is in grplist.	 The
	      effective group ID describes the group whose file access
	      permissions are used by the process (see getegid(2)).  The -g
	      option is often an alternative to --group.

       p pidlist
	      Select by process ID.  Identical to -p and --pid.

       -p pidlist
	      Select by PID.  This selects the processes whose process ID
	      numbers appear in pidlist.  Identical to p and --pid.

       --pid pidlist
	      Select by process ID.  Identical to -p and p.

       --ppid pidlist
	      Select by parent process ID.  This selects the processes with a
	      parent process ID in pidlist.  That is, it selects processes
	      that are children of those listed in pidlist.

       -s sesslist
	      Select by session ID.  This selects the processes with a session
	      ID specified in sesslist.

       --sid sesslist
	      Select by session ID.  Identical to -s.

       t ttylist
	      Select by tty.  Nearly identical to -t and --tty, but can also
	      be used with an empty ttylist to indicate the terminal
	      associated with ps.  Using the T option is considered cleaner
	      than using t with an empty ttylist.

       -t ttylist
	      Select by tty.  This selects the processes associated with the
	      terminals given in ttylist.  Terminals (ttys, or screens for
	      text output) can be specified in several forms: /dev/ttyS1,
	      ttyS1, S1.  A plain "-" may be used to select processes not
	      attached to any terminal.

       --tty ttylist
	      Select by terminal.  Identical to -t and t.

       U userlist
	      Select by effective user ID (EUID) or name.  This selects the
	      processes whose effective user name or ID is in userlist.	 The
	      effective user ID describes the user whose file access
	      permissions are used by the process (see geteuid(2)).  Identical
	      to -u and --user.

       -U userlist
	      Select by real user ID (RUID) or name.  It selects the processes
	      whose real user name or ID is in the userlist list.  The real
	      user ID identifies the user who created the process, see
	      getuid(2).

       -u userlist
	      Select by effective user ID (EUID) or name.  This selects the
	      processes whose effective user name or ID is in userlist.

	      The effective user ID describes the user whose file access
	      permissions are used by the process (see geteuid(2)).  Identical
	      to U and --user.

       --User userlist
	      Select by real user ID (RUID) or name.  Identical to -U.

       --user userlist
	      Select by effective user ID (EUID) or name.  Identical to -u and
	      U.

OUTPUT FORMAT CONTROL
       These options are used to choose the information displayed by ps.  The
       output may differ by personality.

       -c     Show different scheduler information for the -l option.

       --context
	      Display security context format (for SELinux).

       -f     Do full-format listing. This option can be combined with many
	      other UNIX-style options to add additional columns.  It also
	      causes the command arguments to be printed.  When used with -L,
	      the NLWP (number of threads) and LWP (thread ID) columns will be
	      added.  See the c option, the format keyword args, and the
	      format keyword comm.

       -F     Extra full format.  See the -f option, which -F implies.

       --format format
	      user-defined format.  Identical to -o and o.

       j      BSD job control format.

       -j     Jobs format.

       l      Display BSD long format.

       -l     Long format.  The -y option is often useful with this.

       -M     Add a column of security data.  Identical to Z (for SELinux).

       O format
	      is preloaded o (overloaded).  The BSD O option can act like -O
	      (user-defined output format with some common fields predefined)
	      or can be used to specify sort order.  Heuristics are used to
	      determine the behavior of this option.  To ensure that the
	      desired behavior is obtained (sorting or formatting), specify
	      the option in some other way (e.g.  with -O or --sort).  When
	      used as a formatting option, it is identical to -O, with the BSD
	      personality.

       -O format
	      Like -o, but preloaded with some default columns.	 Identical to
	      -o pid,format,state,tname,time,command or -o pid,format,tname,
	      time,cmd, see -o below.

       o format
	      Specify user-defined format.  Identical to -o and --format.

       -o format
	      User-defined format.  format is a single argument in the form of
	      a blank-separated or comma-separated list, which offers a way to
	      specify individual output columns.  The recognized keywords are
	      described in the STANDARD FORMAT SPECIFIERS section below.
	      Headers may be renamed (ps -o pid,ruser=RealUser -o
	      comm=Command) as desired.	 If all column headers are empty (ps
	      -o pid= -o comm=) then the header line will not be output.
	      Column width will increase as needed for wide headers; this may
	      be used to widen up columns such as WCHAN (ps -o pid,wchan=WIDE-
	      WCHAN-COLUMN -o comm).  Explicit width control (ps opid,
	      wchan:42,cmd) is offered too.  The behavior of ps -o pid=X,
	      comm=Y varies with personality; output may be one column named
	      "X,comm=Y" or two columns named "X" and "Y".  Use multiple -o
	      options when in doubt.  Use the PS_FORMAT environment variable
	      to specify a default as desired; DefSysV and DefBSD are macros
	      that may be used to choose the default UNIX or BSD columns.

       s      Display signal format.

       u      Display user-oriented format.

       v      Display virtual memory format.

       X      Register format.

       -y     Do not show flags; show rss in place of addr.  This option can
	      only be used with -l.

       Z      Add a column of security data.  Identical to -M (for SELinux).

OUTPUT MODIFIERS
       c      Show the true command name.  This is derived from the name of
	      the executable file, rather than from the argv value.  Command
	      arguments and any modifications to them are thus not shown.
	      This option effectively turns the args format keyword into the
	      comm format keyword; it is useful with the -f format option and
	      with the various BSD-style format options, which all normally
	      display the command arguments.  See the -f option, the format
	      keyword args, and the format keyword comm.

       --cols n
	      Set screen width.

       --columns n
	      Set screen width.

       --cumulative
	      Include some dead child process data (as a sum with the parent).

       e      Show the environment after the command.

       f      ASCII art process hierarchy (forest).

       --forest
	      ASCII art process tree.

       h      No header.  (or, one header per screen in the BSD personality).
	      The h option is problematic.  Standard BSD ps uses this option
	      to print a header on each page of output, but older Linux ps
	      uses this option to totally disable the header.  This version of
	      ps follows the Linux usage of not printing the header unless the
	      BSD personality has been selected, in which case it prints a
	      header on each page of output.  Regardless of the current
	      personality, you can use the long options --headers and
	      --no-headers to enable printing headers each page or disable
	      headers entirely, respectively.

       -H     Show process hierarchy (forest).

       --headers
	      Repeat header lines, one per page of output.

       k spec Specify sorting order.  Sorting syntax is
	      [+|-]key[,[+|-]key[,...]].  Choose a multi-letter key from the
	      STANDARD FORMAT SPECIFIERS section.  The "+" is optional since
	      default direction is increasing numerical or lexicographic
	      order.  Identical to --sort.

		      Examples:
		      ps jaxkuid,-ppid,+pid
		      ps axk comm o comm,args
		      ps kstart_time -ef

       --lines n
	      Set screen height.

       -n namelist
	      Set namelist file.  Identical to N.  The namelist file is needed
	      for a proper WCHAN display, and must match the current Linux
	      kernel exactly for correct output.  Without this option, the
	      default search path for the namelist is:

		      $PS_SYSMAP
		      $PS_SYSTEM_MAP
		      /proc/*/wchan
		      /boot/System.map-$(uname -r)
		      /boot/System.map
		      /lib/modules/$(uname -r)/System.map
		      /usr/src/linux/System.map
		      /System.map

       n      Numeric output for WCHAN and USER (including all types of UID
	      and GID).

       N namelist
	      Specify namelist file.  Identical to -n, see -n above.

       --no-headers
	      Print no header line at all.  --no-heading is an alias for this
	      option.

       O order
	      Sorting order (overloaded).  The BSD O option can act like -O
	      (user-defined output format with some common fields predefined)
	      or can be used to specify sort order.  Heuristics are used to
	      determine the behavior of this option.  To ensure that the
	      desired behavior is obtained (sorting or formatting), specify
	      the option in some other way (e.g.  with -O or --sort).

	      For sorting, obsolete BSD O option syntax is
	      O[+|-]k1[,[+|-]k2[,...]].	 It orders the processes listing
	      according to the multilevel sort specified by the sequence of
	      one-letter short keys k1,k2, ...	described in the OBSOLETE SORT
	      KEYS section below.  The "+" is currently optional, merely
	      re-iterating the default direction on a key, but may help to
	      distinguish an O sort from an O format.  The "-" reverses
	      direction only on the key it precedes.

       --rows n
	      Set screen height.

       S      Sum up some information, such as CPU usage, from dead child
	      processes into their parent.  This is useful for examining a
	      system where a parent process repeatedly forks off short-lived
	      children to do work.

       --sort spec
	      Specify sorting order.  Sorting syntax is
	      [+|-]key[,[+|-]key[,...]].  Choose a multi-letter key from the
	      STANDARD FORMAT SPECIFIERS section.  The "+" is optional since
	      default direction is increasing numerical or lexicographic
	      order.  Identical to k.  For example: ps jax --sort=uid,-ppid,
	      +pid

       w      Wide output.  Use this option twice for unlimited width.

       -w     Wide output.  Use this option twice for unlimited width.

       --width n
	      Set screen width.

THREAD DISPLAY
       H      Show threads as if they were processes.

       -L     Show threads, possibly with LWP and NLWP columns.

       m      Show threads after processes.

       -m     Show threads after processes.

       -T     Show threads, possibly with SPID column.

OTHER INFORMATION
       --help section
	      Print a help message.  The section argument can be one of
	      simple, list, output, threads, misc or all.  The argument can be
	      shortened to one of the underlined letters as in: s|l|o|t|m|a.

       --info Print debugging info.

       L      List all format specifiers.

       V      Print the procps-ng version.

       -V     Print the procps-ng version.

       --version
	      Print the procps-ng version.

NOTES
       This ps works by reading the virtual files in /proc.  This ps does not
       need to be setuid kmem or have any privileges to run.  Do not give this
       ps any special permissions.

       This ps needs access to namelist data for proper WCHAN display.	For
       kernels prior to 2.6, the System.map file must be installed.

       CPU usage is currently expressed as the percentage of time spent
       running during the entire lifetime of a process.	 This is not ideal,
       and it does not conform to the standards that ps otherwise conforms to.
       CPU usage is unlikely to add up to exactly 100%.

       The SIZE and RSS fields don't count some parts of a process including
       the page tables, kernel stack, struct thread_info, and struct
       task_struct.  This is usually at least 20 KiB of memory that is always
       resident.  SIZE is the virtual size of the process (code+data+stack).

       Processes marked <defunct> are dead processes (so-called "zombies")
       that remain because their parent has not destroyed them properly.
       These processes will be destroyed by init(8) if the parent process
       exits.

       If the length of the username is greater than the length of the display
       column, the numeric user ID is displayed instead.

       Commands options such as ps -aux are not recommended as it is a
       confusion of two different standards.  According to the POSIX and UNIX
       standards, the above command asks to display all processes with a TTY
       (generally the commands users are running) plus all processes owned by
       a user named "x".  If that user doesn't exist, then ps will assume you
       really meant "ps aux".

PROCESS FLAGS
       The sum of these values is displayed in the "F" column, which is
       provided by the flags output specifier:

	       1    forked but didn't exec
	       4    used super-user privileges

PROCESS STATE CODES
       Here are the different values that the s, stat and state output
       specifiers (header "STAT" or "S") will display to describe the state of
       a process:

	       D    uninterruptible sleep (usually IO)
	       R    running or runnable (on run queue)
	       S    interruptible sleep (waiting for an event to complete)
	       T    stopped, either by a job control signal or because it is
		    being traced
	       W    paging (not valid since the 2.6.xx kernel)
	       X    dead (should never be seen)
	       Z    defunct ("zombie") process, terminated but not reaped by
		    its parent

       For BSD formats and when the stat keyword is used, additional
       characters may be displayed:

	       <    high-priority (not nice to other users)
	       N    low-priority (nice to other users)
	       L    has pages locked into memory (for real-time and custom IO)
	       s    is a session leader
	       l    is multi-threaded (using CLONE_THREAD, like NPTL pthreads
		    do)
	       +    is in the foreground process group

OBSOLETE SORT KEYS
       These keys are used by the BSD O option (when it is used for sorting).
       The GNU --sort option doesn't use these keys, but the specifiers
       described below in the STANDARD FORMAT SPECIFIERS section.  Note that
       the values used in sorting are the internal values ps uses and not the
       "cooked" values used in some of the output format fields (e.g.  sorting
       on tty will sort into device number, not according to the terminal name
       displayed).  Pipe ps output into the sort(1) command if you want to
       sort the cooked values.

       KEY   LONG	  DESCRIPTION
       c     cmd	  simple name of executable
       C     pcpu	  cpu utilization
       f     flags	  flags as in long format F field
       g     pgrp	  process group ID
       G     tpgid	  controlling tty process group ID
       j     cutime	  cumulative user time
       J     cstime	  cumulative system time
       k     utime	  user time
       m     min_flt	  number of minor page faults
       M     maj_flt	  number of major page faults
       n     cmin_flt	  cumulative minor page faults
       N     cmaj_flt	  cumulative major page faults
       o     session	  session ID
       p     pid	  process ID
       P     ppid	  parent process ID
       r     rss	  resident set size
       R     resident	  resident pages
       s     size	  memory size in kilobytes
       S     share	  amount of shared pages
       t     tty	  the device number of the controlling tty
       T     start_time	  time process was started
       U     uid	  user ID number
       u     user	  user name
       v     vsize	  total VM size in KiB
       y     priority	  kernel scheduling priority

AIX FORMAT DESCRIPTORS
       This ps supports AIX format descriptors, which work somewhat like the
       formatting codes of printf(1) and printf(3).  For example, the normal
       default output can be produced with this: ps -eo "%p %y %x %c".	The
       NORMAL codes are described in the next section.

       CODE   NORMAL   HEADER
       %C     pcpu     %CPU
       %G     group    GROUP
       %P     ppid     PPID
       %U     user     USER
       %a     args     COMMAND
       %c     comm     COMMAND
       %g     rgroup   RGROUP
       %n     nice     NI
       %p     pid      PID
       %r     pgid     PGID
       %t     etime    ELAPSED
       %u     ruser    RUSER
       %x     time     TIME
       %y     tty      TTY
       %z     vsz      VSZ

STANDARD FORMAT SPECIFIERS
       Here are the different keywords that may be used to control the output
       format (e.g. with option -o) or to sort the selected processes with the
       GNU-style --sort option.

       For example: ps -eo pid,user,args --sort user

       This version of ps tries to recognize most of the keywords used in
       other implementations of ps.

       The following user-defined format specifiers may contain spaces:
       args, cmd, comm, command, fname, ucmd, ucomm, lstart, bsdstart, start.

       Some keywords may not be available for sorting.

       CODE	   HEADER    DESCRIPTION

       %cpu	   %CPU	     cpu utilization of the process in "##.#" format.
			     Currently, it is the CPU time used divided by the
			     time the process has been running
			     (cputime/realtime ratio), expressed as a
			     percentage.  It will not add up to 100% unless
			     you are lucky.  (alias pcpu).

       %mem	   %MEM	     ratio of the process's resident set size  to the
			     physical memory on the machine, expressed as a
			     percentage.  (alias pmem).

       args	   COMMAND   command with all its arguments as a string.
			     Modifications to the arguments may be shown.  The
			     output in this column may contain spaces.	A
			     process marked <defunct> is partly dead, waiting
			     to be fully destroyed by its parent.  Sometimes
			     the process args will be unavailable; when this
			     happens, ps will instead print the executable
			     name in brackets.	(alias cmd, command).  See
			     also the comm format keyword, the -f option, and
			     the c option.
			     When specified last, this column will extend to
			     the edge of the display.  If ps can not determine
			     display width, as when output is redirected
			     (piped) into a file or another command, the
			     output width is undefined (it may be 80,
			     unlimited, determined by the TERM variable, and
			     so on).  The COLUMNS environment variable or
			     --cols option may be used to exactly determine
			     the width in this case.  The w or -w option may
			     be also be used to adjust width.

       blocked	   BLOCKED   mask of the blocked signals, see signal(7).
			     According to the width of the field, a 32 or
			     64-bit mask in hexadecimal format is displayed.
			     (alias sig_block, sigmask).

       bsdstart	   START     time the command started.	If the process was
			     started less than 24 hours ago, the output format
			     is " HH:MM", else it is " Mmm:SS" (where Mmm is
			     the three letters of the month).  See also
			     lstart, start, start_time, and stime.

       bsdtime	   TIME	     accumulated cpu time, user + system.  The display
			     format is usually "MMM:SS", but can be shifted to
			     the right if the process used more than 999
			     minutes of cpu time.

       c	   C	     processor utilization. Currently, this is the
			     integer value of the percent usage over the
			     lifetime of the process.  (see %cpu).

       caught	   CAUGHT    mask of the caught signals, see signal(7).
			     According to the width of the field, a 32 or 64
			     bits mask in hexadecimal format is displayed.
			     (alias sig_catch, sigcatch).

       cgroup	   CGROUP    display control groups to which the process
			     belongs.

       class	   CLS	     scheduling class of the process.  (alias
			     policy, cls).  Field's possible values are:

				      -	  not reported
				      TS  SCHED_OTHER
				      FF  SCHED_FIFO
				      RR  SCHED_RR
				      B	  SCHED_BATCH
				      ISO SCHED_ISO
				      IDL SCHED_IDLE
				      ?	  unknown value

       cls	   CLS	     scheduling class of the process.  (alias
			     policy, cls).  Field's possible values are:

				      -	  not reported
				      TS  SCHED_OTHER
				      FF  SCHED_FIFO
				      RR  SCHED_RR
				      B	  SCHED_BATCH
				      ISO SCHED_ISO
				      IDL SCHED_IDLE
				      ?	  unknown value

       cmd	   CMD	     see args.	(alias args, command).

       comm	   COMMAND   command name (only the executable name).
			     Modifications to the command name will not be
			     shown.  A process marked <defunct> is partly
			     dead, waiting to be fully destroyed by its
			     parent.  The output in this column may contain
			     spaces.  (alias ucmd, ucomm).  See also the args
			     format keyword, the -f option, and the c option.
			     When specified last, this column will extend to
			     the edge of the display.  If ps can not determine
			     display width, as when output is redirected
			     (piped) into a file or another command, the
			     output width is undefined (it may be 80,
			     unlimited, determined by the TERM variable, and
			     so on).  The COLUMNS environment variable or
			     --cols option may be used to exactly determine
			     the width in this case.  The w or -w option may
			     be also be used to adjust width.

       command	   COMMAND   See args.	(alias args, command).

       cp	   CP	     per-mill (tenths of a percent) CPU usage.	(see
			     %cpu).

       cputime	   TIME	     cumulative CPU time, "[DD-]hh:mm:ss" format.
			     (alias time).

       egid	   EGID	     effective group ID number of the process as a
			     decimal integer.  (alias gid).

       egroup	   EGROUP    effective group ID of the process.	 This will be
			     the textual group ID, if it can be obtained and
			     the field width permits, or a decimal
			     representation otherwise.	(alias group).

       eip	   EIP	     instruction pointer.

       esp	   ESP	     stack pointer.

       etime	   ELAPSED   elapsed time since the process was started, in
			     the form [[DD-]hh:]mm:ss.

       etimes	   ELAPSED   elapsed time since the process was started, in
			     seconds.

       euid	   EUID	     effective user ID (alias uid).

       euser	   EUSER     effective user name.  This will be the textual
			     user ID, if it can be obtained and the field
			     width permits, or a decimal representation
			     otherwise.	 The n option can be used to force the
			     decimal representation.  (alias uname, user).

       f	   F	     flags associated with the process, see the
			     PROCESS FLAGS section.  (alias flag, flags).

       fgid	   FGID	     filesystem access group ID.  (alias fsgid).

       fgroup	   FGROUP    filesystem access group ID.  This will be the
			     textual group ID, if it can be obtained and the
			     field width permits, or a decimal representation
			     otherwise.	 (alias fsgroup).

       flag	   F	     see f.  (alias f, flags).

       flags	   F	     see f.  (alias f, flag).

       fname	   COMMAND   first 8 bytes of the base name of the process's
			     executable file.  The output in this column may
			     contain spaces.

       fuid	   FUID	     filesystem access user ID.	 (alias fsuid).

       fuser	   FUSER     filesystem access user ID.	 This will be the
			     textual user ID, if it can be obtained and the
			     field width permits, or a decimal representation
			     otherwise.

       gid	   GID	     see egid.	(alias egid).

       group	   GROUP     see egroup.  (alias egroup).

       ignored	   IGNORED   mask of the ignored signals, see signal(7).
			     According to the width of the field, a 32 or 64
			     bits mask in hexadecimal format is displayed.
			     (alias sig_ignore, sigignore).

       ipcns	   IPCNS     Unique inode number describing the namespace the
			     process belongs to. See namespaces(7).

       label	   LABEL     security label, most commonly used for SELinux
			     context data.  This is for the Mandatory Access
			     Control ("MAC") found on high-security systems.

       lstart	   STARTED   time the command started.	See also
			     bsdstart, start, start_time, and stime.

       lsession	   SESSION   displays login session identifier of a process.

       lwp	   LWP	     light weight process (thread) ID of the
			     dispatchable entity (alias spid, tid).  See tid
			     for additional information.

       machine	   MACHINE   displays machine name for processes assigned to
			     VM or container.

       maj_flt	   MAJFLT    The number of major page faults that have
			     occurred with this process.

       min_flt	   MINFLT    The number of minor page faults that have
			     occurred with this process.

       mntns	   MNTNS     Unique inode number describing the namespace the
			     process belongs to. See namespaces(7).

       netns	   NETNS     Unique inode number describing the namespace the
			     process belongs to. See namespaces(7).

       ni	   NI	     nice value. This ranges from 19 (nicest) to -20
			     (not nice to others), see nice(1).	 (alias nice).

       nice	   NI	     see ni.(alias ni).

       nlwp	   NLWP	     number of lwps (threads) in the process.  (alias
			     thcount).

       nwchan	   WCHAN     address of the kernel function where the process
			     is sleeping (use wchan if you want the kernel
			     function name).  Running tasks will display a
			     dash ('-') in this column.

       ouid	   OWNER     displays the Unix user identifier of the owner of
			     the session of a process.

       pcpu	   %CPU	     see %cpu.	(alias %cpu).

       pending	   PENDING   mask of the pending signals. See signal(7).
			     Signals pending on the process are distinct from
			     signals pending on individual threads.  Use the m
			     option or the -m option to see both.  According
			     to the width of the field, a 32 or 64 bits mask
			     in hexadecimal format is displayed.  (alias sig).

       pgid	   PGID	     process group ID or, equivalently, the process ID
			     of the process group leader.  (alias pgrp).

       pgrp	   PGRP	     see pgid.	(alias pgid).

       pid	   PID	     a number representing the process ID (alias
			     tgid).

       pidns	   PIDNS     Unique inode number describing the namespace the
			     process belongs to. See namespaces(7).

       pmem	   %MEM	     see %mem.	(alias %mem).

       policy	   POL	     scheduling class of the process.  (alias
			     class, cls).  Possible values are:

				      -	  not reported
				      TS  SCHED_OTHER
				      FF  SCHED_FIFO
				      RR  SCHED_RR
				      B	  SCHED_BATCH
				      ISO SCHED_ISO
				      IDL SCHED_IDLE
				      ?	  unknown value

       ppid	   PPID	     parent process ID.

       pri	   PRI	     priority of the process.  Higher number means
			     lower priority.

       psr	   PSR	     processor that process is currently assigned to.

       rgid	   RGID	     real group ID.

       rgroup	   RGROUP    real group name.  This will be the textual group
			     ID, if it can be obtained and the field width
			     permits, or a decimal representation otherwise.

       rss	   RSS	     resident set size, the non-swapped physical
			     memory that a task has used (inkiloBytes).
			     (alias rssize, rsz).

       rssize	   RSS	     see rss.  (alias rss, rsz).

       rsz	   RSZ	     see rss.  (alias rss, rssize).

       rtprio	   RTPRIO    realtime priority.

       ruid	   RUID	     real user ID.

       ruser	   RUSER     real user ID.  This will be the textual user ID,
			     if it can be obtained and the field width
			     permits, or a decimal representation otherwise.

       s	   S	     minimal state display (one character).  See
			     section PROCESS STATE CODES for the different
			     values.  See also stat if you want additional
			     information displayed.  (alias state).

       sched	   SCH	     scheduling policy of the process.	The policies
			     SCHED_OTHER (SCHED_NORMAL), SCHED_FIFO, SCHED_RR,
			     SCHED_BATCH, SCHED_ISO, and SCHED_IDLE are
			     respectively displayed as 0, 1, 2, 3, 4, and 5.

       seat	   SEAT	     displays login session identifier of a process.

       sess	   SESS	     session ID or, equivalently, the process ID of
			     the session leader.  (alias session, sid).

       sgi_p	   P	     processor that the process is currently executing
			     on.  Displays "*" if the process is not currently
			     running or runnable.

       sgid	   SGID	     saved group ID.  (alias svgid).

       sgroup	   SGROUP    saved group name.	This will be the textual group
			     ID, if it can be obtained and the field width
			     permits, or a decimal representation otherwise.

       sid	   SID	     see sess.	(alias sess, session).

       sig	   PENDING   see pending.  (alias pending, sig_pend).

       sigcatch	   CAUGHT    see caught.  (alias caught, sig_catch).

       sigignore   IGNORED   see ignored.  (alias ignored, sig_ignore).

       sigmask	   BLOCKED   see blocked.  (alias blocked, sig_block).

       size	   SIZE	     approximate amount of swap space that would be
			     required if the process were to dirty all
			     writable pages and then be swapped out.  This
			     number is very rough!

       slice	   SLICE     displays slice unit which a process belongs to.

       spid	   SPID	     see lwp.  (alias lwp, tid).

       stackp	   STACKP    address of the bottom (start) of stack for the
			     process.

       start	   STARTED   time the command started.	If the process was
			     started less than 24 hours ago, the output format
			     is "HH:MM:SS", else it is "  Mmm dd" (where Mmm
			     is a three-letter month name).  See also
			     lstart, bsdstart, start_time, and stime.

       start_time  START     starting time or date of the process.  Only the
			     year will be displayed if the process was not
			     started the same year ps was invoked, or "MmmDD"
			     if it was not started the same day, or "HH:MM"
			     otherwise.	 See also bsdstart, start, lstart,
			     and stime.

       stat	   STAT	     multi-character process state.  See section
			     PROCESS STATE CODES for the different values
			     meaning.  See also s and state if you just want
			     the first character displayed.

       state	   S	     see s. (alias s).

       suid	   SUID	     saved user ID.  (alias svuid).

       supgid	   SUPGID    group ids of supplementary groups, if any.	 See
			     getgroups(2).

       supgrp	   SUPGRP    group names of supplementary groups, if any.  See
			     getgroups(2).

       suser	   SUSER     saved user name.  This will be the textual user
			     ID, if it can be obtained and the field width
			     permits, or a decimal representation otherwise.
			     (alias svuser).

       svgid	   SVGID     see sgid.	(alias sgid).

       svuid	   SVUID     see suid.	(alias suid).

       sz	   SZ	     size in physical pages of the core image of the
			     process.  This includes text, data, and stack
			     space.  Device mappings are currently excluded;
			     this is subject to change.	 See vsz and rss.

       tgid	   TGID	     a number representing the thread group to which a
			     task belongs (alias pid).	It is the process ID
			     of the thread group leader.

       thcount	   THCNT     see nlwp.	(alias nlwp).  number of kernel
			     threads owned by the process.

       tid	   TID	     the unique number representing a dispatacable
			     entity (alias lwp, spid).	This value may also
			     appear as: a process ID (pid); a process group ID
			     (pgrp); a session ID for the session leader
			     (sid); a thread group ID for the thread group
			     leader (tgid); and a tty process group ID for the
			     process group leader (tpgid).

       time	   TIME	     cumulative CPU time, "[DD-]HH:MM:SS" format.
			     (alias cputime).

       tname	   TTY	     controlling tty (terminal).  (alias tt, tty).

       tpgid	   TPGID     ID of the foreground process group on the tty
			     (terminal) that the process is connected to, or
			     -1 if the process is not connected to a tty.

       tt	   TT	     controlling tty (terminal).  (alias tname, tty).

       tty	   TT	     controlling tty (terminal).  (alias tname, tt).

       ucmd	   CMD	     see comm.	(alias comm, ucomm).

       ucomm	   COMMAND   see comm.	(alias comm, ucmd).

       uid	   UID	     see euid.	(alias euid).

       uname	   USER	     see euser.	 (alias euser, user).

       unit	   UNIT	     displays systemd unit which a process belongs to.

       user	   USER	     see euser.	 (alias euser, uname).

       userns	   USERNS    Unique inode number describing the namespace the
			     process belongs to. See namespaces(7).

       utsns	   UTSNS     Unique inode number describing the namespace the
			     process belongs to. See namespaces(7).

       uunit	   UUNIT     displays systemd user unit which a process
			     belongs to.

       vsize	   VSZ	     see vsz.  (alias vsz).

       vsz	   VSZ	     virtual memory size of the process in KiB
			     (1024-byte units).	 Device mappings are currently
			     excluded; this is subject to change.  (alias
			     vsize).

       wchan	   WCHAN     name of the kernel function in which the process
			     is sleeping, a "-" if the process is running, or
			     a "*" if the process is multi-threaded and ps is
			     not displaying threads.

ENVIRONMENT VARIABLES
       The following environment variables could affect ps:

       COLUMNS
	  Override default display width.

       LINES
	  Override default display height.

       PS_PERSONALITY
	  Set to one of posix, old, linux, bsd, sun, digital...	 (see section
	  PERSONALITY below).

       CMD_ENV
	  Set to one of posix, old, linux, bsd, sun, digital...	 (see section
	  PERSONALITY below).

       I_WANT_A_BROKEN_PS
	  Force obsolete command line interpretation.

       LC_TIME
	  Date format.

       PS_COLORS
	  Not currently supported.

       PS_FORMAT
	  Default output format override. You may set this to a format string
	  of the type used for the -o option.  The DefSysV and DefBSD values
	  are particularly useful.

       PS_SYSMAP
	  Default namelist (System.map) location.

       PS_SYSTEM_MAP
	  Default namelist (System.map) location.

       POSIXLY_CORRECT
	  Don't find excuses to ignore bad "features".

       POSIX2
	  When set to "on", acts as POSIXLY_CORRECT.

       UNIX95
	  Don't find excuses to ignore bad "features".

       _XPG
	  Cancel CMD_ENV=irix non-standard behavior.

       In general, it is a bad idea to set these variables.  The one exception
       is CMD_ENV or PS_PERSONALITY, which could be set to Linux for normal
       systems.	 Without that setting, ps follows the useless and bad parts of
       the Unix98 standard.

PERSONALITY
       390	  like the OS/390 OpenEdition ps
       aix	  like AIX ps
       bsd	  like FreeBSD ps (totally non-standard)
       compaq	  like Digital Unix ps
       debian	  like the old Debian ps
       digital	  like Tru64 (was Digital Unix, was OSF/1) ps
       gnu	  like the old Debian ps
       hp	  like HP-UX ps
       hpux	  like HP-UX ps
       irix	  like Irix ps
       linux	  ***** recommended *****
       old	  like the original Linux ps (totally non-standard)
       os390	  like OS/390 Open Edition ps
       posix	  standard
       s390	  like OS/390 Open Edition ps
       sco	  like SCO ps
       sgi	  like Irix ps
       solaris2	  like Solaris 2+ (SunOS 5) ps
       sunos4	  like SunOS 4 (Solaris 1) ps (totally non-standard)
       svr4	  standard
       sysv	  standard
       tru64	  like Tru64 (was Digital Unix, was OSF/1) ps
       unix	  standard
       unix95	  standard
       unix98	  standard

SEE ALSO
       pgrep(1), pstree(1), top(1), proc(5).

STANDARDS
       This ps conforms to:

       1   Version 2 of the Single Unix Specification
       2   The Open Group Technical Standard Base Specifications, Issue 6
       3   IEEE Std 1003.1, 2004 Edition
       4   X/Open System Interfaces Extension [UP XSI]
       5   ISO/IEC 9945:2003

AUTHOR
       ps was originally written by Branko Lankester ⟨lankeste@fwi.uva.nl⟩.
       Michael K. Johnson ⟨johnsonm@redhat.com⟩ re-wrote it significantly to
       use the proc filesystem, changing a few things in the process.  Michael
       Shields ⟨mjshield@nyx.cs.du.edu⟩ added the pid-list feature.  Charles
       Blake ⟨cblake@bbn.com⟩ added multi-level sorting, the dirent-style
       library, the device name-to-number mmaped database, the approximate
       binary search directly on System.map, and many code and documentation
       cleanups.  David Mossberger-Tang wrote the generic BFD support for
       psupdate.  Albert Cahalan ⟨albert@users.sf.net⟩ rewrote ps for full
       Unix98 and BSD support, along with some ugly hacks for obsolete and
       foreign syntax.

       Please send bug reports to ⟨procps@freelists.org⟩.  No subscription is
       required or suggested.

procps-ng			 December 2011				 PS(1)
[top]

List of man pages available for Archlinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net