pod2man man page on Gentoo

Man page or keyword search:  
man Server   6889 pages
apropos Keyword Search (all sections)
Output format
Gentoo logo
[printable version]

POD2MAN(1)	       Perl Programmers Reference Guide		    POD2MAN(1)

NAME
       pod2man - Convert POD data to formatted *roff input

SYNOPSIS
       pod2man [--center=string] [--date=string]
	   [--fixed=font] [--fixedbold=font] [--fixeditalic=font]
	   [--fixedbolditalic=font] [--name=name] [--official]
	   [--quotes=quotes] [--release[=version]]
	   [--section=manext] [--stderr] [--utf8] [--verbose]
	   [input [output] ...]

       pod2man --help

DESCRIPTION
       pod2man is a front-end for Pod::Man, using it to generate *roff input
       from POD source.	 The resulting *roff code is suitable for display on a
       terminal using nroff(1), normally via man(1), or printing using
       troff(1).

       input is the file to read for POD source (the POD can be embedded in
       code).  If input isn't given, it defaults to "STDIN".  output, if
       given, is the file to which to write the formatted output.  If output
       isn't given, the formatted output is written to "STDOUT".  Several POD
       files can be processed in the same pod2man invocation (saving module
       load and compile times) by providing multiple pairs of input and output
       files on the command line.

       --section, --release, --center, --date, and --official can be used to
       set the headers and footers to use; if not given, Pod::Man will assume
       various defaults.  See below or Pod::Man for details.

       pod2man assumes that your *roff formatters have a fixed-width font
       named "CW".  If yours is called something else (like "CR"), use --fixed
       to specify it.  This generally only matters for troff output for
       printing.  Similarly, you can set the fonts used for bold, italic, and
       bold italic fixed-width output.

       Besides the obvious pod conversions, Pod::Man, and therefore pod2man
       also takes care of formatting func(), func(n), and simple variable
       references like $foo or @bar so you don't have to use code escapes for
       them; complex expressions like $fred{'stuff'} will still need to be
       escaped, though.	 It also translates dashes that aren't used as hyphens
       into en dashes, makes long dashes--like this--into proper em dashes,
       fixes "paired quotes," and takes care of several other troff-specific
       tweaks.	See Pod::Man for complete information.

OPTIONS
       -c string, --center=string
	   Sets the centered page header to string.  The default is "User
	   Contributed Perl Documentation", but also see --official below.

       -d string, --date=string
	   Set the left-hand footer string to this value.  By default, the
	   modification date of the input file will be used, or the current
	   date if input comes from "STDIN".

       --fixed=font
	   The fixed-width font to use for verbatim text and code.  Defaults
	   to "CW".  Some systems may want "CR" instead.  Only matters for
	   troff(1) output.

       --fixedbold=font
	   Bold version of the fixed-width font.  Defaults to "CB".  Only
	   matters for troff(1) output.

       --fixeditalic=font
	   Italic version of the fixed-width font (actually, something of a
	   misnomer, since most fixed-width fonts only have an oblique
	   version, not an italic version).  Defaults to "CI".	Only matters
	   for troff(1) output.

       --fixedbolditalic=font
	   Bold italic (probably actually oblique) version of the fixed-width
	   font.  Pod::Man doesn't assume you have this, and defaults to "CB".
	   Some systems (such as Solaris) have this font available as "CX".
	   Only matters for troff(1) output.

       -h, --help
	   Print out usage information.

       -l, --lax
	   No longer used.  pod2man used to check its input for validity as a
	   manual page, but this should now be done by podchecker(1) instead.
	   Accepted for backward compatibility; this option no longer does
	   anything.

       -n name, --name=name
	   Set the name of the manual page to name.  Without this option, the
	   manual name is set to the uppercased base name of the file being
	   converted unless the manual section is 3, in which case the path is
	   parsed to see if it is a Perl module path.  If it is, a path like
	   ".../lib/Pod/Man.pm" is converted into a name like "Pod::Man".
	   This option, if given, overrides any automatic determination of the
	   name.

	   Note that this option is probably not useful when converting
	   multiple POD files at once.	The convention for Unix man pages for
	   commands is for the man page title to be in all-uppercase even if
	   the command isn't.

       -o, --official
	   Set the default header to indicate that this page is part of the
	   standard Perl release, if --center is not also given.

       -q quotes, --quotes=quotes
	   Sets the quote marks used to surround C<> text to quotes.  If
	   quotes is a single character, it is used as both the left and right
	   quote; if quotes is two characters, the first character is used as
	   the left quote and the second as the right quoted; and if quotes is
	   four characters, the first two are used as the left quote and the
	   second two as the right quote.

	   quotes may also be set to the special value "none", in which case
	   no quote marks are added around C<> text (but the font is still
	   changed for troff output).

       -r, --release
	   Set the centered footer.  By default, this is the version of Perl
	   you run pod2man under.  Note that some system an macro sets assume
	   that the centered footer will be a modification date and will
	   prepend something like "Last modified: "; if this is the case, you
	   may want to set --release to the last modified date and --date to
	   the version number.

       -s, --section
	   Set the section for the ".TH" macro.	 The standard section
	   numbering convention is to use 1 for user commands, 2 for system
	   calls, 3 for functions, 4 for devices, 5 for file formats, 6 for
	   games, 7 for miscellaneous information, and 8 for administrator
	   commands.  There is a lot of variation here, however; some systems
	   (like Solaris) use 4 for file formats, 5 for miscellaneous
	   information, and 7 for devices.  Still others use 1m instead of 8,
	   or some mix of both.	 About the only section numbers that are
	   reliably consistent are 1, 2, and 3.

	   By default, section 1 will be used unless the file ends in ".pm",
	   in which case section 3 will be selected.

       --stderr
	   By default, pod2man puts any errors detected in the POD input in a
	   POD ERRORS section in the output manual page.  If --stderr is
	   given, errors are sent to standard error instead and the POD ERRORS
	   section is suppressed.

       -u, --utf8
	   By default, pod2man produces the most conservative possible *roff
	   output to try to ensure that it will work with as many different
	   *roff implementations as possible.  Many *roff implementations
	   cannot handle non-ASCII characters, so this means all non-ASCII
	   characters are converted either to a *roff escape sequence that
	   tries to create a properly accented character (at least for troff
	   output) or to "X".

	   This option says to instead output literal UTF-8 characters.	 If
	   your *roff implementation can handle it, this is the best output
	   format to use and avoids corruption of documents containing non-
	   ASCII characters.  However, be warned that *roff source with
	   literal UTF-8 characters is not supported by many implementations
	   and may even result in segfaults and other bad behavior.

	   Be aware that, when using this option, the input encoding of your
	   POD source must be properly declared unless it is US-ASCII or
	   Latin-1.  POD input without an "=encoding" command will be assumed
	   to be in Latin-1, and if it's actually in UTF-8, the output will be
	   double-encoded.  See perlpod(1) for more information on the
	   "=encoding" command.

       -v, --verbose
	   Print out the name of each output file as it is being generated.

DIAGNOSTICS
       If pod2man fails with errors, see Pod::Man and Pod::Simple for
       information about what those errors might mean.

EXAMPLES
	   pod2man program > program.1
	   pod2man SomeModule.pm /usr/perl/man/man3/SomeModule.3
	   pod2man --section=7 note.pod > note.7

       If you would like to print out a lot of man page continuously, you
       probably want to set the C and D registers to set contiguous page
       numbering and even/odd paging, at least on some versions of man(7).

	   troff -man -rC1 -rD1 perl.1 perldata.1 perlsyn.1 ...

       To get index entries on "STDERR", turn on the F register, as in:

	   troff -man -rF1 perl.1

       The indexing merely outputs messages via ".tm" for each major page,
       section, subsection, item, and any "X<>" directives.  See Pod::Man for
       more details.

BUGS
       Lots of this documentation is duplicated from Pod::Man.

SEE ALSO
       Pod::Man, Pod::Simple, man(1), nroff(1), perlpod(1), podchecker(1),
       perlpodstyle(1), troff(1), man(7)

       The man page documenting the an macro set may be man(5) instead of
       man(7) on your system.

       The current version of this script is always available from its web
       site at <http://www.eyrie.org/~eagle/software/podlators/>.  It is also
       part of the Perl core distribution as of 5.6.0.

AUTHOR
       Russ Allbery <rra@stanford.edu>, based very heavily on the original
       pod2man by Larry Wall and Tom Christiansen.

COPYRIGHT AND LICENSE
       Copyright 1999, 2000, 2001, 2004, 2006, 2008, 2010 Russ Allbery
       <rra@stanford.edu>.

       This program is free software; you may redistribute it and/or modify it
       under the same terms as Perl itself.

perl v5.16.3			  2014-05-01			    POD2MAN(1)
[top]

List of man pages available for Gentoo

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net