pmap_getmaps man page on NetBSD

Man page or keyword search:  
man Server   9087 pages
apropos Keyword Search (all sections)
Output format
NetBSD logo
[printable version]

RPC_SOC(3)		 BSD Library Functions Manual		    RPC_SOC(3)

NAME
     rpc_soc, auth_destroy, authnone_create, authunix_create,
     authunix_create_default, callrpc, clnt_broadcast, clnt_call,
     clnt_control, clnt_create, clnt_destroy, clnt_freeres, clnt_geterr,
     clnt_pcreateerror, clnt_perrno, clnt_perror, clnt_spcreateerror,
     clnt_sperrno, clnt_sperror, clntraw_create, clnttcp_create,
     clntudp_bufcreate, clntudp_create, get_myaddress, pmap_getmaps,
     pmap_getport, pmap_rmtcall, pmap_set, pmap_unset, registerrpc,
     rpc_createerr, svc_destroy, svc_fds, svc_fdset, svc_getargs,
     svc_getcaller, svc_getreg, svc_getregset, svc_getrpccaller, svc_register,
     svc_run, svc_sendreply, svc_unregister, svcerr_auth, svcerr_decode,
     svcerr_noproc, svcerr_noprog, svcerr_progvers, svcerr_systemerr,
     svcerr_weakauth, svcfd_create, svcraw_create, xdr_accepted_reply,
     xdr_authunix_parms, xdr_callhdr, xdr_callmsg, xdr_opaque_auth, xdr_pmap,
     xdr_pmaplist, xdr_rejected_reply, xdr_replymsg, xprt_register,
     xprt_unregister — library routines for remote procedure calls

SYNOPSIS
     #include <rpc/rpc.h>

     void
     auth_destroy(AUTH *auth);

     AUTH *
     authnone_create(void);

     AUTH *
     authunix_create(char *host, int uid, int gid, int len, int *aup_gids);

     AUTH *
     authunix_create_default(void);

     int
     callrpc(char *host, u_long prognum, u_long versnum, u_long procnum,
	 xdrproc_t inproc, char *in, xdrproc_t outproc, char *out);

     enum clnt_stat
     clnt_broadcast(u_long prognum, u_long versnum, u_long procnum,
	 xdrproc_t inproc, char *in, xdrproc_t outproc, char *out,
	 resultproc_t eachresult);

     enum clnt_stat
     clnt_call(CLIENT *clnt, u_long procnum, xdrproc_t inproc, char *in,
	 xdrproc_t outproc, char *out, struct timeval tout);

     int
     clnt_destroy(CLIENT *clnt);

     CLIENT *
     clnt_create(char *host, u_long prog, u_long vers, char *proto);

     bool_t
     clnt_control(CLIENT *cl, u_int req, char *info);

     int
     clnt_freeres(CLIENT *clnt, xdrproc_t outproc, char *out);

     void
     clnt_geterr(CLIENT *clnt, struct rpc_err errp);

     void
     clnt_pcreateerror(char *s);

     void
     clnt_perrno(enum clnt_stat stat);

     int
     clnt_perror(CLIENT *clnt, char *s);

     char *
     clnt_spcreateerror(const char *s);

     char *
     clnt_sperrno(enum clnt_stat stat);

     char *
     clnt_sperror(CLIENT *rpch, char *s);

     CLIENT *
     clntraw_create(u_long prognum, u_long versnum);

     CLIENT *
     clnttcp_create(struct sockaddr_in *addr, u_long prognum, u_long versnum,
	 int *sockp, u_int sendsz, u_int recvsz);

     CLIENT *
     clntudp_create(struct sockaddr_in *addr, u_long prognum, u_long versnum,
	 struct timeval wait, int *sockp);

     CLIENT *
     clntudp_bufcreate(struct sockaddr_in *addr, u_long prognum,
	 u_long versnum, struct timeval wait, int *sockp,
	 unsigned int sendsize, unsigned int recosize);

     int
     get_myaddress(struct sockaddr_in *addr);

     struct pmaplist *
     pmap_getmaps(struct sockaddr_in *addr);

     u_short
     pmap_getport(struct sockaddr_in *addr, u_long prognum, u_long versnum,
	 u_long protocol);

     enum clnt_stat
     pmap_rmtcall(struct sockaddr_in *addr, u_long prognum, u_long versnum,
	 u_long procnum, xdrproc_t inproc, char *in, xdrpoc_t outproc,
	 char *out, struct timeval tout, u_long *portp);

     int
     pmap_set(u_long prognum, u_long versnum, int protocol, int port);

     int
     pmap_unset(u_long prognum, u_long versnum);

     int
     registerrpc(u_long prognum, u_long versnum, u_long procnum,
	 char *(*procname)(), xdrproc_t inproc, xdrproc_t outproc);

     struct rpc_createerr rpc_createerr;

     int
     svc_destroy(SVCXPRT *xprt);

     fd_set svc_fdset;
     int svc_fds;

     int
     svc_freeargs(SVCXPRT *xprt, xdrproc_t inproc, char *in);

     int
     svc_getargs(SVCXPRT *xprt, xdrproc_t inproc, char *in);

     struct sockaddr_in *
     svc_getcaller(SVCXPRT *xprt);

     int
     svc_getreqset(fd_set *rdfds);

     int
     svc_getreq(int rdfds);

     struct netbuf *
     svc_getrpccaller(SVCXPRT *xprt);

     int
     svc_register(SVCXPRT *xprt, u_long prognum, u_long versnum,
	 void (*dispatch)(), u_long protocol);

     int
     svc_run(void);

     int
     svc_sendreply(SVCXPRT *xprt, xdrproc_t outproc, char *out);

     void
     svc_unregister(u_long prognum, u_long versnum);

     void
     svcerr_auth(SVCXPRT *xprt, enum auth_stat why);

     void
     svcerr_decode(SVCXPRT *xprt);

     void
     svcerr_noproc(SVCXPRT *xprt);

     void
     svcerr_noprog(SVCXPRT *xprt);

     void
     svcerr_progvers(SVCXPRT *xprt);

     void
     svcerr_systemerr(SVCXPRT *xprt);

     void
     svcerr_weakauth(SVCXPRT *xprt);

     SVCXPRT *
     svcraw_create(void);

     SVCXPRT *
     svctcp_create(int sock, u_int send_buf_size, u_int recv_buf_size);

     SVCXPRT *
     svcfd_create(int fd, u_int sendsize, u_int recvsize);

     SVCXPRT *
     svcudp_bufcreate(int sock, u_int sendsize, u_int recosize);

     SVCXPRT *
     svcudp_create(int sock);

     int
     xdr_accepted_reply(XDR *xdrs, struct accepted_reply *ar);

     int
     xdr_authunix_parms(XDR *xdrs, struct authunix_parms *aupp);

     void
     xdr_callhdr(XDR *xdrs, struct rpc_msg *chdr);

     int
     xdr_callmsg(XDR *xdrs, struct rpc_msg *cmsg);

     int
     xdr_opaque_auth(XDR *xdrs, struct opaque_auth *ap);

     int
     xdr_pmap(XDR *xdrs, struct pmap *regs);

     int
     xdr_pmaplist(XDR *xdrs, struct pmaplist **rp);

     int
     xdr_rejected_reply(XDR *xdrs, struct rejected_reply *rr);

     int
     xdr_replymsg(XDR *xdrs, struct rpc_msg *rmsg);

     void
     xprt_register(SVCXPRT *xprt);

     void
     xprt_unregister(SVCXPRT *xprt);

DESCRIPTION
     The svc and clnt functions described in this page are the old, TS-RPC
     interface to the XDR and RPC library, and exist for backward
     compatibility. The new interface is described in the pages referenced
     from rpc(3).

     These routines allow C programs to make procedure calls on other machines
     across the network.  First, the client calls a procedure to send a data
     packet to the server.  Upon receipt of the packet, the server calls a
     dispatch routine to perform the requested service, and then sends back a
     reply.  Finally, the procedure call returns to the client.

     auth_destroy()
	  A macro that destroys the authentication information associated with
	  auth.	 Destruction usually involves deallocation of private data
	  structures.  The use of auth is undefined after calling
	  auth_destroy().

     authnone_create()
	  Create and returns an RPC authentication handle that passes nonus‐
	  able authentication information with each remote procedure call.
	  This is the default authentication used by RPC.

     authunix_create()
	  Create and return an RPC authentication handle that contains authen‐
	  tication information.	 The parameter host is the name of the machine
	  on which the information was created; uid is the user's user ID; gid
	  is the user's current group id; len and aup_gids refer to a counted
	  array of groups to which the user belongs.  It is easy to imperson‐
	  ate a user.

     authunix_create_default()
	  Calls authunix_create() with the appropriate parameters.

     callrpc()
	  Call the remote procedure associated with prognum, versnum, and
	  procnum on the machine, host.	 The parameter in is the address of
	  the procedure's argument(s), and out is the address of where to
	  place the result(s); inproc is used to encode the procedure's param‐
	  eters, and outproc is used to decode the procedure's results.	 This
	  routine returns zero if it succeeds, or the value of enum clnt_stat
	  cast to an integer if it fails.  The routine clnt_perrno() is handy
	  for translating failure statuses into messages.

	  Warning: calling remote procedures with this routine uses UDP/IP as
	  a transport; see clntudp_create() for restrictions.  You do not have
	  control of timeouts or authentication using this routine.

     clnt_broadcast()
	  Like callrpc(), except the call message is broadcast to all locally
	  connected broadcast nets.  Each time it receives a response, this
	  routine calls eachresult(), whose form is int eachresult(char *out,
	  struct sockaddr_in *addr) where out is the same as out passed to
	  clnt_broadcast(), except that the remote procedure's output is
	  decoded there; addr points to the address of the machine that sent
	  the results.	If eachresult() returns zero, clnt_broadcast() waits
	  for more replies; otherwise it returns with appropriate status.

	  Warning: broadcast sockets are limited in size to the maximum trans‐
	  fer unit of the data link.  For ethernet, this value is 1500 bytes.

     clnt_call()
	  A macro that calls the remote procedure procnum associated with the
	  client handle, clnt, which is obtained with an RPC client creation
	  routine such as clnt_create().  The parameter in is the address of
	  the procedure's argument(s), and out is the address of where to
	  place the result(s); inproc is used to encode the procedure's param‐
	  eters, and outproc is used to decode the procedure's results; tout
	  is the time allowed for results to come back.

     clnt_destroy()
	  A macro that destroys the client's RPC handle.  Destruction usually
	  involves deallocation of private data structures, including clnt
	  itself.  Use of clnt is undefined after calling clnt_destroy().  If
	  the RPC library opened the associated socket, it will close it also.
	  Otherwise, the socket remains open.

     clnt_create()
	  Generic client creation routine.  host identifies the name of the
	  remote host where the server is located.  proto indicates which kind
	  of transport protocol to use.	 The currently supported values for
	  this field are “udp” and “tcp”.  Default timeouts are set, but can
	  be modified using clnt_control().

	  Warning: Using UDP has its shortcomings.  Since UDP-based RPC mes‐
	  sages can only hold up to 8 Kbytes of encoded data, this transport
	  cannot be used for procedures that take large arguments or return
	  huge results.

     clnt_control()
	  A macro used to change or retrieve various information about a
	  client object.  req indicates the type of operation, and info is a
	  pointer to the information.  For both UDP and TCP the supported val‐
	  ues of req and their argument types and what they do are:

	  CLSET_TIMEOUT		struct timeval; set total timeout.

	  CLGET_TIMEOUT		struct timeval; get total timeout.

				Note: if you set the timeout using
				clnt_control(), the timeout parameter passed
				to clnt_call() will be ignored in all future
				calls.

	  CLGET_SERVER_ADDR	struct sockaddr_in; get server's address.

	  The following operations are valid for UDP only:

	  CLSET_RETRY_TIMEOUT  struct timeval; set the retry timeout.

	  CLGET_RETRY_TIMEOUT  struct timeval; get the retry timeout.

			       The retry timeout is the time that UDP RPC
			       waits for the server to reply before retrans‐
			       mitting the request.

     clnt_freeres()
	  A macro that frees any data allocated by the RPC/XDR system when it
	  decoded the results of an RPC call.  The parameter out is the
	  address of the results, and outproc is the XDR routine describing
	  the results.	This routine returns one if the results were success‐
	  fully freed, and zero otherwise.

     clnt_geterr()
	  A macro that copies the error structure out of the client handle to
	  the structure at address errp.

     clnt_pcreateerror()
	  Print a message to standard error indicating why a client RPC handle
	  could not be created.	 The message is prepended with string s and a
	  colon.  A newline character is appended at the end of the message.
	  Used when a clnt_create(), clntraw_create(), clnttcp_create(), or
	  clntudp_create() call fails.

     clnt_perrno()
	  Print a message to standard error corresponding to the condition
	  indicated by stat.  A newline character is appended at the end of
	  the message.	Used after callrpc().

     clnt_perror()
	  Print a message to standard error indicating why an RPC call failed;
	  clnt is the handle used to do the call.  The message is prepended
	  with string s and a colon.  A newline character is appended at the
	  end of the message.  Used after clnt_call().

     clnt_spcreateerror()
	  Like clnt_pcreateerror(), except that it returns a string instead of
	  printing to the standard error.

	  Bugs: returns pointer to static data that is overwritten on each
	  call.

     clnt_sperrno()
	  Take the same arguments as clnt_perrno(), but instead of sending a
	  message to the standard error indicating why an RPC call failed,
	  return a pointer to a string which contains the message.

	  clnt_sperrno() is used instead of clnt_perrno() if the program does
	  not have a standard error (as a program running as a server quite
	  likely does not), or if the programmer does not want the message to
	  be output with printf(3), or if a message format different than that
	  supported by clnt_perrno() is to be used.  Note: unlike
	  clnt_sperror() and clnt_spcreateerror(), clnt_sperrno() returns a
	  pointer to static data, but the result will not get overwritten on
	  each call.

     clnt_sperror()
	  Like clnt_perror(), except that (like clnt_sperrno()) it returns a
	  string instead of printing to standard error.

	  Bugs: returns pointer to static data that is overwritten on each
	  call.

     clntraw_create()
	  This routine creates a toy RPC client for the remote program
	  prognum, version versnum.  The transport used to pass messages to
	  the service is actually a buffer within the process's address space,
	  so the corresponding RPC server should live in the same address
	  space; see svcraw_create().  This allows simulation of RPC and
	  acquisition of RPC overheads, such as round trip times, without any
	  kernel interference.	This routine returns NULL if it fails.

     clnttcp_create()
	  This routine creates an RPC client for the remote program prognum,
	  version versnum; the client uses TCP/IP as a transport.  The remote
	  program is located at Internet address *addr.	 If addr->sin_port is
	  zero, then it is set to the actual port that the remote program is
	  listening on (the remote rpcbind(8) or portmap service is consulted
	  for this information).  The parameter sockp is a socket; if it is
	  RPC_ANYSOCK, then this routine opens a new one and sets sockp.
	  Since TCP-based RPC uses buffered I/O , the user may specify the
	  size of the send and receive buffers with the parameters sendsz and
	  recvsz; values of zero choose suitable defaults.  This routine
	  returns NULL if it fails.

     clntudp_create()
	  This routine creates an RPC client for the remote program prognum,
	  version versnum; the client uses UDP/IP as a transport.  The remote
	  program is located at Internet address addr.	If addr->sin_port is
	  zero, then it is set to actual port that the remote program is lis‐
	  tening on (the remote rpcbind(8) or portmap service is consulted for
	  this information).  The parameter sockp is a socket; if it is
	  RPC_ANYSOCK, then this routine opens a new one and sets sockp.  The
	  UDP transport resends the call message in intervals of wait time
	  until a response is received or until the call times out.  The total
	  time for the call to time out is specified by clnt_call.

	  Warning: since UDP-based RPC messages can only hold up to 8 Kbytes
	  of encoded data, this transport cannot be used for procedures that
	  take large arguments or return huge results.

     clntudp_bufcreate()
	  This routine creates an RPC client for the remote program prognum,
	  on versnum; the client uses UDP/IP as a transport.  The remote pro‐
	  gram is located at Internet address addr.  If addr->sin_port is
	  zero, then it is set to actual port that the remote program is lis‐
	  tening on (the remote rpcbind(8) or portmap service is consulted for
	  this information).  The parameter sockp is a socket; if it is
	  RPC_ANYSOCK, then this routine opens a new one and sets sockp.  The
	  UDP transport resends the call message in intervals of wait time
	  until a response is received or until the call times out.  The total
	  time for the call to time out is specified by clnt_call.

	  This allows the user to specify the maximum packet size for sending
	  and receiving UDP-based RPC messages.

     get_myaddress()
	  Stuff the machine's IP address into *addr, without consulting the
	  library routines that deal with /etc/hosts.  The port number is
	  always set to htons(PMAPPORT).  Returns zero on success, non-zero on
	  failure.

     pmap_getmaps()
	  A user interface to the rpcbind(8) service, which returns a list of
	  the current RPC program-to-port mappings on the host located at IP
	  address *addr.  This routine can return NULL.	 The command
		rpcinfo -p
	  uses this routine.

     pmap_getport()
	  A user interface to the rpcbind(8) service, which returns the port
	  number on which waits a service that supports program number
	  prognum, version versnum, and speaks the transport protocol associ‐
	  ated with protocol.  The value of protocol is most likely
	  IPPROTO_UDP or IPPROTO_TCP.  A return value of zero means that the
	  mapping does not exist or that the RPC system failured to contact
	  the remote rpcbind(8) service.  In the latter case, the global vari‐
	  able rpc_createerr() contains the RPC status.

     pmap_rmtcall()
	  A user interface to the rpcbind(8) service, which instructs
	  rpcbind(8) on the host at IP address *addr to make an RPC call on
	  your behalf to a procedure on that host.  The parameter *portp will
	  be modified to the program's port number if the procedure succeeds.
	  The definitions of other parameters are discussed in callrpc() and
	  clnt_call().	This procedure should be used for a “ping” and nothing
	  else.	 See also clnt_broadcast().

     pmap_set()
	  A user interface to the rpcbind(8) service, which establishes a map‐
	  ping between the triple [prognum, versnum, protocol] and port on the
	  machine's rpcbind(8) service.	 The value of protocol is most likely
	  IPPROTO_UDP or IPPROTO_TCP.  This routine returns one if it suc‐
	  ceeds, zero otherwise.  Automatically done by svc_register().

     pmap_unset()
	  A user interface to the rpcbind(8) service, which destroys all map‐
	  ping between the triple [prognum, versnum, *] and ports on the
	  machine's rpcbind(8) service.	 This routine returns one if it suc‐
	  ceeds, zero otherwise.

     registerrpc()
	  Register procedure procname with the RPC service package.  If a
	  request arrives for program prognum, version versnum, and procedure
	  procnum, procname is called with a pointer to its parameter(s);
	  progname should return a pointer to its static result(s); inproc is
	  used to decode the parameters while outproc is used to encode the
	  results.  This routine returns zero if the registration succeeded,
	  -1 otherwise.

	  Warning: remote procedures registered in this form are accessed
	  using the UDP/IP transport; see svcudp_bufcreate() for restrictions.

     struct rpc_createerr rpc_createerr;
	  A global variable whose value is set by any RPC client creation rou‐
	  tine that does not succeed.  Use the routine clnt_pcreateerror() to
	  print the reason why.

     svc_destroy()
	  A macro that destroys the RPC service transport handle, xprt.
	  Destruction usually involves deallocation of private data struc‐
	  tures, including xprt itself.	 Use of xprt is undefined after call‐
	  ing this routine.

     fd_set svc_fdset;
	  A global variable reflecting the RPC service side's read file
	  descriptor bit mask; it is suitable as a parameter to the select(2)
	  system call.	This is only of interest if a service implementor does
	  not call svc_run(), but rather does his own asynchronous event pro‐
	  cessing.  This variable is read-only (do not pass its address to
	  select(2)!), yet it may change after calls to svc_getreqset() or any
	  creation routines.

     int svc_fds;
	  Similar to svc_fedset(), but limited to 32 descriptors.  This inter‐
	  face is obsoleted by svc_fdset().

     svc_freeargs()
	  A macro that frees any data allocated by the RPC/XDR system when it
	  decoded the arguments to a service procedure using svc_getargs().
	  This routine returns 1 if the results were successfully freed, and
	  zero otherwise.

     svc_getargs()
	  A macro that decodes the arguments of an RPC request associated with
	  the RPC service transport handle, xprt.  The parameter in is the
	  address where the arguments will be placed; inproc is the XDR rou‐
	  tine used to decode the arguments.  This routine returns one if
	  decoding succeeds, and zero otherwise.

     svc_getcaller()
	  The obsolete way of getting the network address of the caller of a
	  procedure associated with the RPC service transport handle, xprt,
	  use svc_getrpccaller().

     svc_getreqset()
	  This routine is only of interest if a service implementor does not
	  call svc_run(), but instead implements custom asynchronous event
	  processing.  It is called when the select(2) system call has deter‐
	  mined that an RPC request has arrived on some RPC socket(s) ; rdfds
	  is the resultant read file descriptor bit mask.  The routine returns
	  when all sockets associated with the value of rdfds have been ser‐
	  viced.

     svc_getreq()
	  Similar to svc_getreqset(), but limited to 32 descriptors.  This
	  interface is obsoleted by svc_getreqset().

     svc_getrpccaller()
	  The approved way of getting the network address of the caller of a
	  procedure associated with the RPC service transport handle, xprt.

     svc_register()
	  Associates prognum and versnum with the service dispatch procedure,
	  dispatch.  If protocol is zero, the service is not registered with
	  the rpcbind(8) service.  If protocol is non-zero, then a mapping of
	  the triple [prognum, versnum, protocol] to xprt->xp_port is estab‐
	  lished with the local rpcbind(8) service (generally protocol is
	  zero, IPPROTO_UDP or IPPROTO_TCP).  The procedure dispatch has the
	  following form: int dispatch(struct svc_req *request, SVCXPRT
	  *xprt).

	  The svc_register() routine returns one if it succeeds, and zero oth‐
	  erwise.

     svc_run()
	  This routine never returns.  It waits for RPC requests to arrive,
	  and calls the appropriate service procedure using svc_getreq() when
	  one arrives.	This procedure is usually waiting for a select(2) sys‐
	  tem call to return.

     svc_sendreply()
	  Called by an RPC service's dispatch routine to send the results of a
	  remote procedure call.  The parameter xprt is the request's associ‐
	  ated transport handle; outproc is the XDR routine which is used to
	  encode the results; and out is the address of the results.  This
	  routine returns one if it succeeds, zero otherwise.

     svc_unregister()
	  Remove all mapping of the double [prognum, versnum] to dispatch rou‐
	  tines, and of the triple [prognum, versnum, *] to port number.

     svcerr_auth()
	  Called by a service dispatch routine that refuses to perform a
	  remote procedure call due to an authentication error.

     svcerr_decode()
	  Called by a service dispatch routine that cannot successfully decode
	  its parameters.  See also svc_getargs().

     svcerr_noproc()
	  Called by a service dispatch routine that does not implement the
	  procedure number that the caller requests.

     svcerr_noprog()
	  Called when the desired program is not registered with the RPC pack‐
	  age.	Service implementors usually do not need this routine.

     svcerr_progvers()
	  Called when the desired version of a program is not registered with
	  the RPC package.  Service implementors usually do not need this rou‐
	  tine.

     svcerr_systemerr()
	  Called by a service dispatch routine when it detects a system error
	  not covered by any particular protocol.  For example, if a service
	  can no longer allocate storage, it may call this routine.

     svcerr_weakauth()
	  Called by a service dispatch routine that refuses to perform a
	  remote procedure call due to insufficient authentication parameters.
	  The routine calls svcerr_auth(xprt, AUTH_TOOWEAK).

     svcraw_create()
	  This routine creates a toy RPC service transport, to which it
	  returns a pointer.  The transport is really a buffer within the
	  process's address space, so the corresponding RPC client should live
	  in the same address space; see clntraw_create().  This routine
	  allows simulation of RPC and acquisition of RPC overheads (such as
	  round trip times), without any kernel interference.  This routine
	  returns NULL if it fails.

     svctcp_create()
	  This routine creates a TCP/IP-based RPC service transport, to which
	  it returns a pointer.	 The transport is associated with the socket
	  sock, which may be RPC_ANYSOCK, in which case a new socket is cre‐
	  ated.	 If the socket is not bound to a local TCP port, then this
	  routine binds it to an arbitrary port.  Upon completion,
	  xprt->xp_sock is the transport's socket descriptor, and
	  xprt->xp_port is the transport's port number.	 This routine returns
	  NULL if it fails.  Since TCP-based RPC uses buffered I/O , users may
	  specify the size of buffers; values of zero choose suitable
	  defaults.

     svcfd_create()
	  Create a service on top of any open descriptor.  Typically, this
	  descriptor is a connected socket for a stream protocol such as TCP.
	  sendsize and recvsize indicate sizes for the send and receive buf‐
	  fers.	 If they are zero, a reasonable default is chosen.

     svcudp_bufcreate()
	  This routine creates a UDP/IP-based RPC service transport, to which
	  it returns a pointer.	 The transport is associated with the socket
	  sock, which may be RPC_ANYSOCK, in which case a new socket is cre‐
	  ated.	 If the socket is not bound to a local UDP port, then this
	  routine binds it to an arbitrary port.  Upon completion,
	  xprt->xp_sock is the transport's socket descriptor, and
	  xprt->xp_port is the transport's port number.	 This routine returns
	  NULL if it fails.

	  This allows the user to specify the maximum packet size for sending
	  and receiving UDP-based RPC messages.

     svcudp_create()
	  This acts as svcudp_bufcreate(with) predefined sizes for the maximum
	  packet sizes.

     xdr_accepted_reply()
	  Used for encoding RPC reply messages.	 This routine is useful for
	  users who wish to generate RPC-style messages without using the RPC
	  package.

     xdr_authunix_parms()
	  Used for describing UNIX credentials.	 This routine is useful for
	  users who wish to generate these credentials without using the RPC
	  authentication package.

     xdr_callhdr()
	  Used for describing RPC call header messages.	 This routine is use‐
	  ful for users who wish to generate RPC-style messages without using
	  the RPC package.

     xdr_callmsg()
	  Used for describing RPC call messages.  This routine is useful for
	  users who wish to generate RPC-style messages without using the RPC
	  package.

     xdr_opaque_auth()
	  Used for describing RPC authentication information messages.	This
	  routine is useful for users who wish to generate RPC-style messages
	  without using the RPC package.

     xdr_pmap()
	  Used for describing parameters to various rpcbind(8) procedures,
	  externally.  This routine is useful for users who wish to generate
	  these parameters without using the pmap interface.

     xdr_pmaplist()
	  Used for describing a list of port mappings, externally.  This rou‐
	  tine is useful for users who wish to generate these parameters with‐
	  out using the pmap interface.

     xdr_rejected_reply()
	  Used for describing RPC reply messages.  This routine is useful for
	  users who wish to generate RPC-style messages without using the RPC
	  package.

     xdr_replymsg()
	  Used for describing RPC reply messages.  This routine is useful for
	  users who wish to generate RPC-style messages without using the RPC
	  package.

     xprt_register()
	  After RPC service transport handles are created, they should regis‐
	  ter themselves with the RPC service package.	This routine modifies
	  the global variable svc_fds.	Service implementors usually do not
	  need this routine.

     xprt_unregister()
	  Before an RPC service transport handle is destroyed, it should
	  unregister itself with the RPC service package.  This routine modi‐
	  fies the global variable svc_fds.  Service implementors usually do
	  not need this routine.

SEE ALSO
     xdr(3)

     The following manuals:

     Remote Procedure Calls: Protocol Specification.

     Remote Procedure Call Programming Guide.

     rpcgen Programming Guide.

     Sun Microsystems, Inc., USC-ISI, "RPC: Remote Procedure Call Protocol
     Specification", RFC, 1050.

BSD			       December 12, 2008			   BSD
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server NetBSD

List of man pages available for NetBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net