pg_restore man page on Kali

Man page or keyword search:  
man Server   9211 pages
apropos Keyword Search (all sections)
Output format
Kali logo
[printable version]

PG_RESTORE(1)		 PostgreSQL 10.1 Documentation		 PG_RESTORE(1)

NAME
       pg_restore - restore a PostgreSQL database from an archive file created
       by pg_dump

SYNOPSIS
       pg_restore [connection-option...] [option...] [filename]

DESCRIPTION
       pg_restore is a utility for restoring a PostgreSQL database from an
       archive created by pg_dump(1) in one of the non-plain-text formats. It
       will issue the commands necessary to reconstruct the database to the
       state it was in at the time it was saved. The archive files also allow
       pg_restore to be selective about what is restored, or even to reorder
       the items prior to being restored. The archive files are designed to be
       portable across architectures.

       pg_restore can operate in two modes. If a database name is specified,
       pg_restore connects to that database and restores archive contents
       directly into the database. Otherwise, a script containing the SQL
       commands necessary to rebuild the database is created and written to a
       file or standard output. This script output is equivalent to the plain
       text output format of pg_dump. Some of the options controlling the
       output are therefore analogous to pg_dump options.

       Obviously, pg_restore cannot restore information that is not present in
       the archive file. For instance, if the archive was made using the “dump
       data as INSERT commands” option, pg_restore will not be able to load
       the data using COPY statements.

OPTIONS
       pg_restore accepts the following command line arguments.

       filename
	   Specifies the location of the archive file (or directory, for a
	   directory-format archive) to be restored. If not specified, the
	   standard input is used.

       -a
       --data-only
	   Restore only the data, not the schema (data definitions). Table
	   data, large objects, and sequence values are restored, if present
	   in the archive.

	   This option is similar to, but for historical reasons not identical
	   to, specifying --section=data.

       -c
       --clean
	   Clean (drop) database objects before recreating them. (Unless
	   --if-exists is used, this might generate some harmless error
	   messages, if any objects were not present in the destination
	   database.)

       -C
       --create
	   Create the database before restoring into it. If --clean is also
	   specified, drop and recreate the target database before connecting
	   to it.

	   When this option is used, the database named with -d is used only
	   to issue the initial DROP DATABASE and CREATE DATABASE commands.
	   All data is restored into the database name that appears in the
	   archive.

       -d dbname
       --dbname=dbname
	   Connect to database dbname and restore directly into the database.

       -e
       --exit-on-error
	   Exit if an error is encountered while sending SQL commands to the
	   database. The default is to continue and to display a count of
	   errors at the end of the restoration.

       -f filename
       --file=filename
	   Specify output file for generated script, or for the listing when
	   used with -l. Default is the standard output.

       -F format
       --format=format
	   Specify format of the archive. It is not necessary to specify the
	   format, since pg_restore will determine the format automatically.
	   If specified, it can be one of the following:

	   c
	   custom
	       The archive is in the custom format of pg_dump.

	   d
	   directory
	       The archive is a directory archive.

	   t
	   tar
	       The archive is a tar archive.

       -I index
       --index=index
	   Restore definition of named index only. Multiple indexes may be
	   specified with multiple -I switches.

       -j number-of-jobs
       --jobs=number-of-jobs
	   Run the most time-consuming parts of pg_restore — those which load
	   data, create indexes, or create constraints — using multiple
	   concurrent jobs. This option can dramatically reduce the time to
	   restore a large database to a server running on a multiprocessor
	   machine.

	   Each job is one process or one thread, depending on the operating
	   system, and uses a separate connection to the server.

	   The optimal value for this option depends on the hardware setup of
	   the server, of the client, and of the network. Factors include the
	   number of CPU cores and the disk setup. A good place to start is
	   the number of CPU cores on the server, but values larger than that
	   can also lead to faster restore times in many cases. Of course,
	   values that are too high will lead to decreased performance because
	   of thrashing.

	   Only the custom and directory archive formats are supported with
	   this option. The input must be a regular file or directory (not,
	   for example, a pipe). This option is ignored when emitting a script
	   rather than connecting directly to a database server. Also,
	   multiple jobs cannot be used together with the option
	   --single-transaction.

       -l
       --list
	   List the table of contents of the archive. The output of this
	   operation can be used as input to the -L option. Note that if
	   filtering switches such as -n or -t are used with -l, they will
	   restrict the items listed.

       -L list-file
       --use-list=list-file
	   Restore only those archive elements that are listed in list-file,
	   and restore them in the order they appear in the file. Note that if
	   filtering switches such as -n or -t are used with -L, they will
	   further restrict the items restored.

	   list-file is normally created by editing the output of a previous
	   -l operation. Lines can be moved or removed, and can also be
	   commented out by placing a semicolon (;) at the start of the line.
	   See below for examples.

       -n schema
       --schema=schema
	   Restore only objects that are in the named schema. Multiple schemas
	   may be specified with multiple -n switches. This can be combined
	   with the -t option to restore just a specific table.

       -N schema
       --exclude-schema=schema
	   Do not restore objects that are in the named schema. Multiple
	   schemas to be excluded may be specified with multiple -N switches.

	   When both -n and -N are given for the same schema name, the -N
	   switch wins and the schema is excluded.

       -O
       --no-owner
	   Do not output commands to set ownership of objects to match the
	   original database. By default, pg_restore issues ALTER OWNER or SET
	   SESSION AUTHORIZATION statements to set ownership of created schema
	   elements. These statements will fail unless the initial connection
	   to the database is made by a superuser (or the same user that owns
	   all of the objects in the script). With -O, any user name can be
	   used for the initial connection, and this user will own all the
	   created objects.

       -P function-name(argtype [, ...])
       --function=function-name(argtype [, ...])
	   Restore the named function only. Be careful to spell the function
	   name and arguments exactly as they appear in the dump file's table
	   of contents. Multiple functions may be specified with multiple -P
	   switches.

       -R
       --no-reconnect
	   This option is obsolete but still accepted for backwards
	   compatibility.

       -s
       --schema-only
	   Restore only the schema (data definitions), not data, to the extent
	   that schema entries are present in the archive.

	   This option is the inverse of --data-only. It is similar to, but
	   for historical reasons not identical to, specifying
	   --section=pre-data --section=post-data.

	   (Do not confuse this with the --schema option, which uses the word
	   “schema” in a different meaning.)

       -S username
       --superuser=username
	   Specify the superuser user name to use when disabling triggers.
	   This is relevant only if --disable-triggers is used.

       -t table
       --table=table
	   Restore definition and/or data of only the named table. For this
	   purpose, “table” includes views, materialized views, sequences, and
	   foreign tables. Multiple tables can be selected by writing multiple
	   -t switches. This option can be combined with the -n option to
	   specify table(s) in a particular schema.

	       Note
	       When -t is specified, pg_restore makes no attempt to restore
	       any other database objects that the selected table(s) might
	       depend upon. Therefore, there is no guarantee that a
	       specific-table restore into a clean database will succeed.

	       Note
	       This flag does not behave identically to the -t flag of
	       pg_dump. There is not currently any provision for wild-card
	       matching in pg_restore, nor can you include a schema name
	       within its -t.

	       Note
	       In versions prior to PostgreSQL 9.6, this flag matched only
	       tables, not any other type of relation.

       -T trigger
       --trigger=trigger
	   Restore named trigger only. Multiple triggers may be specified with
	   multiple -T switches.

       -v
       --verbose
	   Specifies verbose mode.

       -V
       --version
	   Print the pg_restore version and exit.

       -x
       --no-privileges
       --no-acl
	   Prevent restoration of access privileges (grant/revoke commands).

       -1
       --single-transaction
	   Execute the restore as a single transaction (that is, wrap the
	   emitted commands in BEGIN/COMMIT). This ensures that either all the
	   commands complete successfully, or no changes are applied. This
	   option implies --exit-on-error.

       --disable-triggers
	   This option is relevant only when performing a data-only restore.
	   It instructs pg_restore to execute commands to temporarily disable
	   triggers on the target tables while the data is reloaded. Use this
	   if you have referential integrity checks or other triggers on the
	   tables that you do not want to invoke during data reload.

	   Presently, the commands emitted for --disable-triggers must be done
	   as superuser. So you should also specify a superuser name with -S
	   or, preferably, run pg_restore as a PostgreSQL superuser.

       --enable-row-security
	   This option is relevant only when restoring the contents of a table
	   which has row security. By default, pg_restore will set
	   row_security to off, to ensure that all data is restored in to the
	   table. If the user does not have sufficient privileges to bypass
	   row security, then an error is thrown. This parameter instructs
	   pg_restore to set row_security to on instead, allowing the user to
	   attempt to restore the contents of the table with row security
	   enabled. This might still fail if the user does not have the right
	   to insert the rows from the dump into the table.

	   Note that this option currently also requires the dump be in INSERT
	   format, as COPY FROM does not support row security.

       --if-exists
	   Use conditional commands (i.e. add an IF EXISTS clause) when
	   cleaning database objects. This option is not valid unless --clean
	   is also specified.

       --no-data-for-failed-tables
	   By default, table data is restored even if the creation command for
	   the table failed (e.g., because it already exists). With this
	   option, data for such a table is skipped. This behavior is useful
	   if the target database already contains the desired table contents.
	   For example, auxiliary tables for PostgreSQL extensions such as
	   PostGIS might already be loaded in the target database; specifying
	   this option prevents duplicate or obsolete data from being loaded
	   into them.

	   This option is effective only when restoring directly into a
	   database, not when producing SQL script output.

       --no-publications
	   Do not output commands to restore publications, even if the archive
	   contains them.

       --no-security-labels
	   Do not output commands to restore security labels, even if the
	   archive contains them.

       --no-subscriptions
	   Do not output commands to restore subscriptions, even if the
	   archive contains them.

       --no-tablespaces
	   Do not output commands to select tablespaces. With this option, all
	   objects will be created in whichever tablespace is the default
	   during restore.

       --section=sectionname
	   Only restore the named section. The section name can be pre-data,
	   data, or post-data. This option can be specified more than once to
	   select multiple sections. The default is to restore all sections.

	   The data section contains actual table data as well as large-object
	   definitions. Post-data items consist of definitions of indexes,
	   triggers, rules and constraints other than validated check
	   constraints. Pre-data items consist of all other data definition
	   items.

       --strict-names
	   Require that each schema (-n/--schema) and table (-t/--table)
	   qualifier match at least one schema/table in the backup file.

       --use-set-session-authorization
	   Output SQL-standard SET SESSION AUTHORIZATION commands instead of
	   ALTER OWNER commands to determine object ownership. This makes the
	   dump more standards-compatible, but depending on the history of the
	   objects in the dump, might not restore properly.

       -?
       --help
	   Show help about pg_restore command line arguments, and exit.

       pg_restore also accepts the following command line arguments for
       connection parameters:

       -h host
       --host=host
	   Specifies the host name of the machine on which the server is
	   running. If the value begins with a slash, it is used as the
	   directory for the Unix domain socket. The default is taken from the
	   PGHOST environment variable, if set, else a Unix domain socket
	   connection is attempted.

       -p port
       --port=port
	   Specifies the TCP port or local Unix domain socket file extension
	   on which the server is listening for connections. Defaults to the
	   PGPORT environment variable, if set, or a compiled-in default.

       -U username
       --username=username
	   User name to connect as.

       -w
       --no-password
	   Never issue a password prompt. If the server requires password
	   authentication and a password is not available by other means such
	   as a .pgpass file, the connection attempt will fail. This option
	   can be useful in batch jobs and scripts where no user is present to
	   enter a password.

       -W
       --password
	   Force pg_restore to prompt for a password before connecting to a
	   database.

	   This option is never essential, since pg_restore will automatically
	   prompt for a password if the server demands password
	   authentication. However, pg_restore will waste a connection attempt
	   finding out that the server wants a password. In some cases it is
	   worth typing -W to avoid the extra connection attempt.

       --role=rolename
	   Specifies a role name to be used to perform the restore. This
	   option causes pg_restore to issue a SET ROLE rolename command after
	   connecting to the database. It is useful when the authenticated
	   user (specified by -U) lacks privileges needed by pg_restore, but
	   can switch to a role with the required rights. Some installations
	   have a policy against logging in directly as a superuser, and use
	   of this option allows restores to be performed without violating
	   the policy.

ENVIRONMENT
       PGHOST
       PGOPTIONS
       PGPORT
       PGUSER
	   Default connection parameters

       This utility, like most other PostgreSQL utilities, also uses the
       environment variables supported by libpq (see Section 33.14). However,
       it does not read PGDATABASE when a database name is not supplied.

DIAGNOSTICS
       When a direct database connection is specified using the -d option,
       pg_restore internally executes SQL statements. If you have problems
       running pg_restore, make sure you are able to select information from
       the database using, for example, psql(1). Also, any default connection
       settings and environment variables used by the libpq front-end library
       will apply.

NOTES
       If your installation has any local additions to the template1 database,
       be careful to load the output of pg_restore into a truly empty
       database; otherwise you are likely to get errors due to duplicate
       definitions of the added objects. To make an empty database without any
       local additions, copy from template0 not template1, for example:

	   CREATE DATABASE foo WITH TEMPLATE template0;

       The limitations of pg_restore are detailed below.

       ·   When restoring data to a pre-existing table and the option
	   --disable-triggers is used, pg_restore emits commands to disable
	   triggers on user tables before inserting the data, then emits
	   commands to re-enable them after the data has been inserted. If the
	   restore is stopped in the middle, the system catalogs might be left
	   in the wrong state.

       ·   pg_restore cannot restore large objects selectively; for instance,
	   only those for a specific table. If an archive contains large
	   objects, then all large objects will be restored, or none of them
	   if they are excluded via -L, -t, or other options.

       See also the pg_dump(1) documentation for details on limitations of
       pg_dump.

       Once restored, it is wise to run ANALYZE on each restored table so the
       optimizer has useful statistics; see Section 24.1.3 and Section 24.1.6
       for more information.

EXAMPLES
       Assume we have dumped a database called mydb into a custom-format dump
       file:

	   $ pg_dump -Fc mydb > db.dump

       To drop the database and recreate it from the dump:

	   $ dropdb mydb
	   $ pg_restore -C -d postgres db.dump

       The database named in the -d switch can be any database existing in the
       cluster; pg_restore only uses it to issue the CREATE DATABASE command
       for mydb. With -C, data is always restored into the database name that
       appears in the dump file.

       To reload the dump into a new database called newdb:

	   $ createdb -T template0 newdb
	   $ pg_restore -d newdb db.dump

       Notice we don't use -C, and instead connect directly to the database to
       be restored into. Also note that we clone the new database from
       template0 not template1, to ensure it is initially empty.

       To reorder database items, it is first necessary to dump the table of
       contents of the archive:

	   $ pg_restore -l db.dump > db.list

       The listing file consists of a header and one line for each item, e.g.:

	   ;
	   ; Archive created at Mon Sep 14 13:55:39 2009
	   ;	 dbname: DBDEMOS
	   ;	 TOC Entries: 81
	   ;	 Compression: 9
	   ;	 Dump Version: 1.10-0
	   ;	 Format: CUSTOM
	   ;	 Integer: 4 bytes
	   ;	 Offset: 8 bytes
	   ;	 Dumped from database version: 8.3.5
	   ;	 Dumped by pg_dump version: 8.3.8
	   ;
	   ;
	   ; Selected TOC Entries:
	   ;
	   3; 2615 2200 SCHEMA - public pasha
	   1861; 0 0 COMMENT - SCHEMA public pasha
	   1862; 0 0 ACL - public pasha
	   317; 1247 17715 TYPE public composite pasha
	   319; 1247 25899 DOMAIN public domain0 pasha

       Semicolons start a comment, and the numbers at the start of lines refer
       to the internal archive ID assigned to each item.

       Lines in the file can be commented out, deleted, and reordered. For
       example:

	   10; 145433 TABLE map_resolutions postgres
	   ;2; 145344 TABLE species postgres
	   ;4; 145359 TABLE nt_header postgres
	   6; 145402 TABLE species_records postgres
	   ;8; 145416 TABLE ss_old postgres

       could be used as input to pg_restore and would only restore items 10
       and 6, in that order:

	   $ pg_restore -L db.list db.dump

SEE ALSO
       pg_dump(1), pg_dumpall(1), psql(1)

PostgreSQL 10.1			     2017			 PG_RESTORE(1)
[top]

List of man pages available for Kali

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net