perlthrtut man page on BSDOS

Man page or keyword search:  
man Server   6284 pages
apropos Keyword Search (all sections)
Output format
BSDOS logo
[printable version]



PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

NAME
       perlthrtut - tutorial on threads in Perl

DESCRIPTION
       One of the most prominent new features of Perl 5.005 is
       the inclusion of threads. Threads make a number of things
       a lot easier, and are a very useful addition to your bag
       of programming tricks.

What Is A Thread Anyway?
       A thread is a flow of control through a program with a
       single execution point.

       Sounds an awful lot like a process, doesn't it? Well, it
       should.	Threads are one of the pieces of a process. Every
       process has at least one thread and, up until now, every
       process running Perl had only one thread. With 5.005,
       though, you can create extra threads. We're going to show
       you how, when, and why.

Threaded Program Models
       There are three basic ways that you can structure a
       threaded program. Which model you choose depends on what
       you need your program to do. For many non-trivial threaded
       programs you'll need to choose different models for
       different pieces of your program.

       Boss/Worker

       The boss/worker model usually has one `boss' thread and
       one or more `worker' threads. The boss thread gathers or
       generates tasks that need to be done, then parcels those
       tasks out to the appropriate worker thread.

       This model is common in GUI and server programs, where a
       main thread waits for some event and then passes that
       event to the appropriate worker threads for processing.
       Once the event has been passed on, the boss thread goes
       back to waiting for another event.

       The boss thread does relatively little work. While tasks
       aren't necessarily performed faster than with any other
       method, it tends to have the best user-response times.

       Work Crew

       In the work crew model, several threads are created that
       do essentially the same thing to different pieces of data.
       It closely mirrors classical parallel processing and
       vector processors, where a large array of processors do
       the exact same thing to many pieces of data.

       This model is particularly useful if the system running
       the program will distribute multiple threads across

16/Sep/1999	       perl 5.005, patch 03			1

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

       different processors. It can also be useful in ray tracing
       or rendering engines, where the individual threads can
       pass on interim results to give the user visual feedback.

       Pipeline

       The pipeline model divides up a task into a series of
       steps, and passes the results of one step on to the thread
       processing the next. Each thread does one thing to each
       piece of data and passes the results to the next thread in
       line.

       This model makes the most sense if you have multiple
       processors so two or more threads will be executing in
       parallel, though it can often make sense in other contexts
       as well. It tends to keep the individual tasks small and
       simple, as well as allowing some parts of the pipeline to
       block (on I/O or system calls, for example) while other
       parts keep going. If you're running different parts of the
       pipeline on different processors you may also take
       advantage of the caches on each processor.

       This model is also handy for a form of recursive
       programming where, rather than having a subroutine call
       itself, it instead creates another thread. Prime and
       Fibonacci generators both map well to this form of the
       pipeline model. (A version of a prime number generator is
       presented later on.)

Native threads
       There are several different ways to implement threads on a
       system. How threads are implemented depends both on the
       vendor and, in some cases, the version of the operating
       system. Often the first implementation will be relatively
       simple, but later versions of the OS will be more
       sophisticated.

       While the information in this section is useful, it's not
       necessary, so you can skip it if you don't feel up to it.

       There are three basic categories of threads-user-mode
       threads, kernel threads, and multiprocessor kernel
       threads.

       User-mode threads are threads that live entirely within a
       program and its libraries. In this model, the OS knows
       nothing about threads. As far as it's concerned, your
       process is just a process.

       This is the easiest way to implement threads, and the way
       most OSes start. The big disadvantage is that, since the
       OS knows nothing about threads, if one thread blocks they
       all do. Typical blocking activities include most system
       calls, most I/O, and things like sleep().

16/Sep/1999	       perl 5.005, patch 03			2

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

       Kernel threads are the next step in thread evolution. The
       OS knows about kernel threads, and makes allowances for
       them.  The main difference between a kernel thread and a
       user-mode thread is blocking. With kernel threads, things
       that block a single thread don't block other threads. This
       is not the case with user-mode threads, where the kernel
       blocks at the process level and not the thread level.

       This is a big step forward, and can give a threaded
       program quite a performance boost over non-threaded
       programs.  Threads that block performing I/O, for example,
       won't block threads that are doing other things. Each
       process still has only one thread running at once, though,
       regardless of how many CPUs a system might have.

       Since kernel threading can interrupt a thread at any time,
       they will uncover some of the implicit locking assumptions
       you may make in your program. For example, something as
       simple as $a = $a + 2 can behave unpredictably with kernel
       threads if $a is visible to other threads, as another
       thread may have changed $a between the time it was fetched
       on the right hand side and the time the new value is
       stored.

       Multiprocessor Kernel Threads are the final step in thread
       support. With multiprocessor kernel threads on a machine
       with multiple CPUs, the OS may schedule two or more
       threads to run simultaneously on different CPUs.

       This can give a serious performance boost to your threaded
       program, since more than one thread will be executing at
       the same time. As a tradeoff, though, any of those nagging
       synchronization issues that might not have shown with
       basic kernel threads will appear with a vengeance.

       In addition to the different levels of OS involvement in
       threads, different OSes (and different thread
       implementations for a particular OS) allocate CPU cycles
       to threads in different ways.

       Cooperative multitasking systems have running threads give
       up control if one of two things happen. If a thread calls
       a yield function, it gives up control. It also gives up
       control if the thread does something that would cause it
       to block, such as perform I/O. In a cooperative
       multitasking implementation, one thread can starve all the
       others for CPU time if it so chooses.

       Preemptive multitasking systems interrupt threads at
       regular intervals while the system decides which thread
       should run next. In a preemptive multitasking system, one
       thread usually won't monopolize the CPU.

       On some systems, there can be cooperative and preemptive

16/Sep/1999	       perl 5.005, patch 03			3

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

       threads running simultaneously. (Threads running with
       realtime priorities often behave cooperatively, for
       example, while threads running at normal priorities behave
       preemptively.)

What kind of threads are perl threads?
       If you have experience with other thread implementations,
       you might find that things aren't quite what you expect.
       It's very important to remember when dealing with Perl
       threads that Perl Threads Are Not X Threads, for all
       values of X.  They aren't POSIX threads, or DecThreads, or
       Java's Green threads, or Win32 threads. There are
       similarities, and the broad concepts are the same, but if
       you start looking for implementation details you're going
       to be either disappointed or confused. Possibly both.

       This is not to say that Perl threads are completely
       different from everything that's ever come before--they're
       not. Perl's threading model owes a lot to other thread
       models, especially POSIX. Just as Perl is not C, though,
       Perl threads are not POSIX threads. So if you find
       yourself looking for mutexes, or thread priorities, it's
       time to step back a bit and think about what you want to
       do and how Perl can do it.

Threadsafe Modules
       The addition of threads has changed Perl's internals
       substantially. There are implications for people who write
       modules--especially modules with XS code or external
       libraries. While most modules won't encounter any
       problems, modules that aren't explicitly tagged as thread-
       safe should be tested before being used in production
       code.

       Not all modules that you might use are thread-safe, and
       you should always assume a module is unsafe unless the
       documentation says otherwise. This includes modules that
       are distributed as part of the core. Threads are a beta
       feature, and even some of the standard modules aren't
       thread-safe.

       If you're using a module that's not thread-safe for some
       reason, you can protect yourself by using semaphores and
       lots of programming discipline to control access to the
       module. Semaphores are covered later in the article.  Perl
       Threads Are Different

Thread Basics
       The core Thread module provides the basic functions you
       need to write threaded programs. In the following sections
       we'll cover the basics, showing you what you need to do to
       create a threaded program. After that, we'll go over some
       of the features of the Thread module that make threaded
       programming easier.

16/Sep/1999	       perl 5.005, patch 03			4

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

       Basic Thread Support

       Thread support is a Perl compile-time option-it's
       something that's turned on or off when Perl is built at
       your site, rather than when your programs are compiled. If
       your Perl wasn't compiled with thread support enabled,
       then any attempt to use threads will fail.

       Remember that the threading support in 5.005 is in beta
       release, and should be treated as such. You should expect
       that it may not function entirely properly, and the thread
       interface may well change some before it is a fully
       supported, production release.  The beta version shouldn't
       be used for mission-critical projects.  Having said that,
       threaded Perl is pretty nifty, and worth a look.

       Your programs can use the Config module to check whether
       threads are enabled. If your program can't run without
       them, you can say something like:

	 $Config{usethreads} or die "Recompile Perl with threads to run this program.";

       A possibly-threaded program using a possibly-threaded
       module might have code like this:

	   use Config;
	   use MyMod;

	   if ($Config{usethreads}) {
	       # We have threads
	       require MyMod_threaded;
	       import MyMod_threaded;
	   } else {
	       require MyMod_unthreaded;
	       import MyMod_unthreaded;
	   }

       Since code that runs both with and without threads is
       usually pretty messy, it's best to isolate the thread-
       specific code in its own module. In our example above,
       that's what MyMod_threaded is, and it's only imported if
       we're running on a threaded Perl.

       Creating Threads

       The Thread package provides the tools you need to create
       new threads. Like any other module, you need to tell Perl
       you want to use it; use Thread imports all the pieces you
       need to create basic threads.

       The simplest, straightforward way to create a thread is
       with new():

	   use Thread;

16/Sep/1999	       perl 5.005, patch 03			5

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   $thr = new Thread \&sub1;

	   sub sub1 {
	       print "In the thread\n";
	   }

       The new() method takes a reference to a subroutine and
       creates a new thread, which starts executing in the
       referenced subroutine. Control then passes both to the
       subroutine and the caller.

       If you need to, your program can pass parameters to the
       subroutine as part of the thread startup. Just include the
       list of parameters as part of the Thread::new call, like
       this:

	   use Thread;
	   $Param3 = "foo";
	   $thr = new Thread \&sub1, "Param 1", "Param 2", $Param3;
	   $thr = new Thread \&sub1, @ParamList;
	   $thr = new Thread \&sub1, qw(Param1 Param2 $Param3);

	   sub sub1 {
	       my @InboundParameters = @_;
	       print "In the thread\n";
	       print "got parameters >", join("<>", @InboundParameters), "<\n";
	   }

       The subroutine runs like a normal Perl subroutine, and the
       call to new Thread returns whatever the subroutine
       returns.

       The last example illustrates another feature of threads.
       You can spawn off several threads using the same
       subroutine. Each thread executes the same subroutine, but
       in a separate thread with a separate environment and
       potentially separate arguments.

       The other way to spawn a new thread is with async(), which
       is a way to spin off a chunk of code like eval(), but into
       its own thread:

	   use Thread qw(async);

	   $LineCount = 0;

	   $thr = async {
	       while(<>) {$LineCount++}
	       print "Got $LineCount lines\n";
	   };

	   print "Waiting for the linecount to end\n";
	   $thr->join;
	   print "All done\n";

16/Sep/1999	       perl 5.005, patch 03			6

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

       You'll notice we did a use Thread qw(async) in that
       example.	 async is not exported by default, so if you want
       it, you'll either need to import it before you use it or
       fully qualify it as Thread::async. You'll also note that
       there's a semicolon after the closing brace. That's
       because async() treats the following block as an anonymous
       subroutine, so the semicolon is necessary.

       Like eval(), the code executes in the same context as it
       would if it weren't spun off. Since both the code inside
       and after the async start executing, you need to be
       careful with any shared resources. Locking and other
       synchronization techniques are covered later.

       Giving up control

       There are times when you may find it useful to have a
       thread explicitly give up the CPU to another thread. Your
       threading package might not support preemptive
       multitasking for threads, for example, or you may be doing
       something compute-intensive and want to make sure that the
       user-interface thread gets called frequently. Regardless,
       there are times that you might want a thread to give up
       the processor.

       Perl's threading package provides the yield() function
       that does this. yield() is pretty straightforward, and
       works like this:

	   use Thread qw(yield async);
	   async {
	       my $foo = 50;
	       while ($foo--) { print "first async\n" }
	       yield;
	       $foo = 50;
	       while ($foo--) { print "first async\n" }
	   };
	   async {
	       my $foo = 50;
	       while ($foo--) { print "second async\n" }
	       yield;
	       $foo = 50;
	       while ($foo--) { print "second async\n" }
	   };

       Waiting For A Thread To Exit

       Since threads are also subroutines, they can return
       values. To wait for a thread to exit and extract any
       scalars it might return, you can use the join() method.

	   use Thread;
	   $thr = new Thread \&sub1;

16/Sep/1999	       perl 5.005, patch 03			7

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   @ReturnData = $thr->join;
	   print "Thread returned @ReturnData";

	   sub sub1 { return "Fifty-six", "foo", 2; }

       In the example above, the join() method returns as soon as
       the thread ends. In addition to waiting for a thread to
       finish and gathering up any values that the thread might
       have returned, join() also performs any OS cleanup
       necessary for the thread.  That cleanup might be
       important, especially for long-running programs that spawn
       lots of threads. If you don't want the return values and
       don't want to wait for the thread to finish, you should
       call the detach() method instead. detach() is covered
       later in the article.

       Errors In Threads

       So what happens when an error occurs in a thread? Any
       errors that could be caught with eval() are postponed
       until the thread is joined. If your program never joins,
       the errors appear when your program exits.

       Errors deferred until a join() can be caught with eval():

	   use Thread qw(async);
	   $thr = async {$b = 3/0};   # Divide by zero error
	   $foo = eval {$thr->join};
	   if ($@) {
	       print "died with error $@\n";
	   } else {
	       print "Hey, why aren't you dead?\n";
	   }

       eval() passes any results from the joined thread back
       unmodified, so if you want the return value of the thread,
       this is your only chance to get them.

       Ignoring A Thread

       join() does three things:it waits for a thread to exit,
       cleans up after it, and returns any data the thread may
       have produced. But what if you're not interested in the
       thread's return values, and you don't really care when the
       thread finishes? All you want is for the thread to get
       cleaned up after when it's done.

       In this case, you use the detach() method. Once a thread
       is detached, it'll run until it's finished, then Perl will
       clean up after it automatically.

	   use Thread;
	   $thr = new Thread \&sub1; # Spawn the thread

16/Sep/1999	       perl 5.005, patch 03			8

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   $thr->detach; # Now we officially don't care any more

	   sub sub1 {
	       $a = 0;
	       while (1) {
		   $a++;
		   print "\$a is $a\n";
		   sleep 1;
	       }
	   }

       Once a thread is detached, it may not be joined, and any
       output that it might have produced (if it was done and
       waiting for a join) is lost.

Threads And Data
       Now that we've covered the basics of threads, it's time
       for our next topic: data. Threading introduces a couple of
       complications to data access that non-threaded programs
       never need to worry about.

       Shared And Unshared Data

       The single most important thing to remember when using
       threads is that all threads potentially have access to all
       the data anywhere in your program. While this is true with
       a nonthreaded Perl program as well, it's especially
       important to remember with a threaded program, since more
       than one thread can be accessing this data at once.

       Perl's scoping rules don't change because you're using
       threads.	 If a subroutine (or block, in the case of
       async()) could see a variable if you weren't running with
       threads, it can see it if you are. This is especially
       important for the subroutines that create, and makes my
       variables even more important. Remember--if your variables
       aren't lexically scoped (declared with my) you're probably
       sharing it between threads.

       Thread Pitfall: Races

       While threads bring a new set of useful tools, they also
       bring a number of pitfalls. One pitfall is the race
       condition:

	   use Thread;
	   $a = 1;
	   $thr1 = Thread->new(\&sub1);
	   $thr2 = Thread->new(\&sub2);

	   sleep 10;
	   print "$a\n";

16/Sep/1999	       perl 5.005, patch 03			9

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   sub sub1 { $foo = $a; $a = $foo + 1; }
	   sub sub2 { $bar = $a; $a = $bar + 1; }

       What do you think $a will be? The answer, unfortunately,
       is "it depends." Both sub1() and sub2() access the global
       variable $a, once to read and once to write. Depending on
       factors ranging from your thread implementation's
       scheduling algorithm to the phase of the moon, $a can be 2
       or 3.

       Race conditions are caused by unsynchronized access to
       shared data. Without explicit synchronization, there's no
       way to be sure that nothing has happened to the shared
       data between the time you access it and the time you
       update it. Even this simple code fragment has the
       possibility of error:

	   use Thread qw(async);
	   $a = 2;
	   async{ $b = $a; $a = $b + 1; };
	   async{ $c = $a; $a = $c + 1; };

       Two threads both access $a. Each thread can potentially be
       interrupted at any point, or be executed in any order. At
       the end, $a could be 3 or 4, and both $b and $c could be 2
       or 3.

       Whenever your program accesses data or resources that can
       be accessed by other threads, you must take steps to
       coordinate access or risk data corruption and race
       conditions.

       Controlling access: lock()

       The lock() function takes a variable (or subroutine, but
       we'll get to that later) and puts a lock on it. No other
       thread may lock the variable until the locking thread
       exits the innermost block containing the lock. Using
       lock() is straightforward:

16/Sep/1999	       perl 5.005, patch 03		       10

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   use Thread qw(async);
	   $a = 4;
	   $thr1 = async {
	       $foo = 12;
	       {
		   lock ($a); # Block until we get access to $a
		   $b = $a;
		   $a = $b * $foo;
	       }
	       print "\$foo was $foo\n";
	   };
	   $thr2 = async {
	       $bar = 7;
	       {
		   lock ($a); # Block until we can get access to $a
		   $c = $a;
		   $a = $c * $bar;
	       }
	       print "\$bar was $bar\n";
	   };
	   $thr1->join;
	   $thr2->join;
	   print "\$a is $a\n";

       lock() blocks the thread until the variable being locked
       is available. When lock() returns, your thread can be sure
       that no other thread can lock that variable until the
       innermost block containing the lock exits.

       It's important to note that locks don't prevent access to
       the variable in question, only lock attempts. This is in
       keeping with Perl's longstanding tradition of courteous
       programming, and the advisory file locking that flock()
       gives you. Locked subroutines behave differently, however.
       We'll cover that later in the article.

       You may lock arrays and hashes as well as scalars. Locking
       an array, though, will not block subsequent locks on array
       elements, just lock attempts on the array itself.

       Finally, locks are recursive, which means it's okay for a
       thread to lock a variable more than once. The lock will
       last until the outermost lock() on the variable goes out
       of scope.

       Thread Pitfall: Deadlocks

       Locks are a handy tool to synchronize access to data.
       Using them properly is the key to safe shared data.
       Unfortunately, locks aren't without their dangers.
       Consider the following code:

16/Sep/1999	       perl 5.005, patch 03		       11

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   use Thread qw(async yield);
	   $a = 4;
	   $b = "foo";
	   async {
	       lock($a);
	       yield;
	       sleep 20;
	       lock ($b);
	   };
	   async {
	       lock($b);
	       yield;
	       sleep 20;
	       lock ($a);
	   };

       This program will probably hang until you kill it. The
       only way it won't hang is if one of the two async()
       routines acquires both locks first. A guaranteed-to-hang
       version is more complicated, but the principle is the
       same.

       The first thread spawned by async() will grab a lock on $a
       then, a second or two later, try to grab a lock on $b.
       Meanwhile, the second thread grabs a lock on $b, then
       later tries to grab a lock on $a. The second lock attempt
       for both threads will block, each waiting for the other to
       release its lock.

       This condition is called a deadlock, and it occurs
       whenever two or more threads are trying to get locks on
       resources that the others own. Each thread will block,
       waiting for the other to release a lock on a resource.
       That never happens, though, since the thread with the
       resource is itself waiting for a lock to be released.

       There are a number of ways to handle this sort of problem.
       The best way is to always have all threads acquire locks
       in the exact same order. If, for example, you lock
       variables $a, $b, and $c, always lock $a before $b, and $b
       before $c. It's also best to hold on to locks for as short
       a period of time to minimize the risks of deadlock.

       Queues: Passing Data Around

       A queue is a special thread-safe object that lets you put
       data in one end and take it out the other without having
       to worry about synchronization issues. They're pretty
       straightforward, and look like this:

	   use Thread qw(async);
	   use Thread::Queue;

16/Sep/1999	       perl 5.005, patch 03		       12

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   my $DataQueue = new Thread::Queue;
	   $thr = async {
	       while ($DataElement = $DataQueue->dequeue) {
		   print "Popped $DataElement off the queue\n";
	       }
	   };

	   $DataQueue->enqueue(12);
	   $DataQueue->enqueue("A", "B", "C");
	   $DataQueue->enqueue(\$thr);
	   sleep 10;
	   $DataQueue->enqueue(undef);

       You create the queue with new Thread::Queue. Then you can
       add lists of scalars onto the end with enqueue(), and pop
       scalars off the front of it with dequeue(). A queue has no
       fixed size, and can grow as needed to hold everything
       pushed on to it.

       If a queue is empty, dequeue() blocks until another thread
       enqueues something. This makes queues ideal for event
       loops and other communications between threads.

Threads And Code
       In addition to providing thread-safe access to data via
       locks and queues, threaded Perl also provides general-
       purpose semaphores for coarser synchronization than locks
       provide and thread-safe access to entire subroutines.

       Semaphores: Synchronizing Data Access

       Semaphores are a kind of generic locking mechanism. Unlike
       lock, which gets a lock on a particular scalar, Perl
       doesn't associate any particular thing with a semaphore so
       you can use them to control access to anything you like.
       In addition, semaphores can allow more than one thread to
       access a resource at once, though by default semaphores
       only allow one thread access at a time.

       Basic semaphores
	   Semaphores have two methods, down and up. down
	   decrements the resource count, while up increments it.
	   down calls will block if the semaphore's current count
	   would decrement below zero. This program gives a quick
	   demonstration:

	       use Thread qw(yield);
	       use Thread::Semaphore;
	       my $semaphore = new Thread::Semaphore;
	       $GlobalVariable = 0;

	       $thr1 = new Thread \&sample_sub, 1;
	       $thr2 = new Thread \&sample_sub, 2;
	       $thr3 = new Thread \&sample_sub, 3;

16/Sep/1999	       perl 5.005, patch 03		       13

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	       sub sample_sub {
		   my $SubNumber = shift @_;
		   my $TryCount = 10;
		   my $LocalCopy;
		   sleep 1;
		   while ($TryCount--) {
		       $semaphore->down;
		       $LocalCopy = $GlobalVariable;
		       print "$TryCount tries left for sub $SubNumber (\$GlobalVariable is $GlobalVariable)\n";
		       yield;
		       sleep 2;
		       $LocalCopy++;
		       $GlobalVariable = $LocalCopy;
		       $semaphore->up;
		   }
	       }

	   The three invocations of the subroutine all operate in
	   sync. The semaphore, though, makes sure that only one
	   thread is accessing the global variable at once.

       Advanced Semaphores
	   By default, semaphores behave like locks, letting only
	   one thread down() them at a time. However, there are
	   other uses for semaphores.

	   Each semaphore has a counter attached to it. down()
	   decrements the counter and up() increments the
	   counter. By default, semaphores are created with the
	   counter set to one, down() decrements by one, and up()
	   increments by one. If down() attempts to decrement the
	   counter below zero, it blocks until the counter is
	   large enough. Note that while a semaphore can be
	   created with a starting count of zero, any up() or
	   down() always changes the counter by at least one.
	   $semaphore->down(0) is the same as
	   $semaphore->down(1).

	   The question, of course, is why would you do something
	   like this? Why create a semaphore with a starting
	   count that's not one, or why decrement/increment it by
	   more than one? The answer is resource availability.
	   Many resources that you want to manage access for can
	   be safely used by more than one thread at once.

	   For example, let's take a GUI driven program. It has a
	   semaphore that it uses to synchronize access to the
	   display, so only one thread is ever drawing at once.
	   Handy, but of course you don't want any thread to
	   start drawing until things are properly set up. In
	   this case, you can create a semaphore with a counter
	   set to zero, and up it when things are ready for
	   drawing.

16/Sep/1999	       perl 5.005, patch 03		       14

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   Semaphores with counters greater than one are also
	   useful for establishing quotas. Say, for example, that
	   you have a number of threads that can do I/O at once.
	   You don't want all the threads reading or writing at
	   once though, since that can potentially swamp your I/O
	   channels, or deplete your process' quota of
	   filehandles. You can use a semaphore initialized to
	   the number of concurrent I/O requests (or open files)
	   that you want at any one time, and have your threads
	   quietly block and unblock themselves.

	   Larger increments or decrements are handy in those
	   cases where a thread needs to check out or return a
	   number of resources at once.

       Attributes: Restricting Access To Subroutines

       In addition to synchronizing access to data or resources,
       you might find it useful to synchronize access to
       subroutines. You may be accessing a singular machine
       resource (perhaps a vector processor), or find it easier
       to serialize calls to a particular subroutine than to have
       a set of locks and sempahores.

       One of the additions to Perl 5.005 is subroutine
       attributes. The Thread package uses these to provide
       several flavors of serialization. It's important to
       remember that these attributes are used in the compilation
       phase of your program so you can't change a subroutine's
       behavior while your program is actually running.

       Subroutine Locks

       The basic subroutine lock looks like this:

	   sub test_sub {
	       use attrs qw(locked);
	   }

       This ensures that only one thread will be executing this
       subroutine at any one time. Once a thread calls this
       subroutine, any other thread that calls it will block
       until the thread in the subroutine exits it. A more
       elaborate example looks like this:

	   use Thread qw(yield);

	   new Thread \&thread_sub, 1;
	   new Thread \&thread_sub, 2;
	   new Thread \&thread_sub, 3;
	   new Thread \&thread_sub, 4;

16/Sep/1999	       perl 5.005, patch 03		       15

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   sub sync_sub {
	       use attrs qw(locked);
	       my $CallingThread = shift @_;
	       print "In sync_sub for thread $CallingThread\n";
	       yield;
	       sleep 3;
	       print "Leaving sync_sub for thread $CallingThread\n";
	   }

	   sub thread_sub {
	       my $ThreadID = shift @_;
	       print "Thread $ThreadID calling sync_sub\n";
	       sync_sub($ThreadID);
	       print "$ThreadID is done with sync_sub\n";
	   }

       The use attrs qw(locked) locks sync_sub(), and if you run
       this, you can see that only one thread is in it at any one
       time.

       Methods

       Locking an entire subroutine can sometimes be overkill,
       especially when dealing with Perl objects. When calling a
       method for an object, for example, you want to serialize
       calls to a method, so that only one thread will be in the
       subroutine for a particular object, but threads calling
       that subroutine for a different object aren't blocked. The
       method attribute indicates whether the subroutine is
       really a method.

	   use Thread;

	   sub tester {
	       my $thrnum = shift @_;
	       my $bar = new Foo;
	       foreach (1..10) {
		   print "$thrnum calling per_object\n";
		   $bar->per_object($thrnum);
		   print "$thrnum out of per_object\n";
		   yield;
		   print "$thrnum calling one_at_a_time\n";
		   $bar->one_at_a_time($thrnum);
		   print "$thrnum out of one_at_a_time\n";
		   yield;
	       }
	   }

	   foreach my $thrnum (1..10) {
	       new Thread \&tester, $thrnum;
	   }

16/Sep/1999	       perl 5.005, patch 03		       16

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   package Foo;
	   sub new {
	       my $class = shift @_;
	       return bless [@_], $class;
	   }

	   sub per_object {
	       use attrs qw(locked method);
	       my ($class, $thrnum) = @_;
	       print "In per_object for thread $thrnum\n";
	       yield;
	       sleep 2;
	       print "Exiting per_object for thread $thrnum\n";
	   }

	   sub one_at_a_time {
	       use attrs qw(locked);
	       my ($class, $thrnum) = @_;
	       print "In one_at_a_time for thread $thrnum\n";
	       yield;
	       sleep 2;
	       print "Exiting one_at_a_time for thread $thrnum\n";
	   }

       As you can see from the output (omitted for brevity; it's
       800 lines) all the threads can be in per_object()
       simultaneously, but only one thread is ever in
       one_at_a_time() at once.

       Locking A Subroutine

       You can lock a subroutine as you would lock a variable.
       Subroutine locks work the same as a use attrs qw(locked)
       in the subroutine, and block all access to the subroutine
       for other threads until the lock goes out of scope. When
       the subroutine isn't locked, any number of threads can be
       in it at once, and getting a lock on a subroutine doesn't
       affect threads already in the subroutine. Getting a lock
       on a subroutine looks like this:

	   lock(\&sub_to_lock);

       Simple enough. Unlike use attrs, which is a compile time
       option, locking and unlocking a subroutine can be done at
       runtime at your discretion. There is some runtime penalty
       to using lock(\&sub) instead of use attrs qw(locked), so
       make sure you're choosing the proper method to do the
       locking.

       You'd choose lock(\&sub) when writing modules and code to
       run on both threaded and unthreaded Perl, especially for
       code that will run on 5.004 or earlier Perls. In that
       case, it's useful to have subroutines that should be
       serialized lock themselves if they're running threaded,

16/Sep/1999	       perl 5.005, patch 03		       17

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

       like so:

	   package Foo;
	   use Config;
	   $Running_Threaded = 0;

	   BEGIN { $Running_Threaded = $Config{'usethreads'} }

	   sub sub1 { lock(\&sub1) if $Running_Threaded }

       This way you can ensure single-threadedness regardless of
       which version of Perl you're running.

General Thread Utility Routines
       We've covered the workhorse parts of Perl's threading
       package, and with these tools you should be well on your
       way to writing threaded code and packages. There are a few
       useful little pieces that didn't really fit in anyplace
       else.

       What Thread Am I In?

       The Thread->self method provides your program with a way
       to get an object representing the thread it's currently
       in. You can use this object in the same way as the ones
       returned from the thread creation.

       Thread IDs

       tid() is a thread object method that returns the thread ID
       of the thread the object represents. Thread IDs are
       integers, with the main thread in a program being 0.
       Currently Perl assigns a unique tid to every thread ever
       created in your program, assigning the first thread to be
       created a tid of 1, and increasing the tid by 1 for each
       new thread that's created.

       Are These Threads The Same?

       The equal() method takes two thread objects and returns
       true if the objects represent the same thread, and false
       if they don't.

       What Threads Are Running?

       Thread->list returns a list of thread objects, one for
       each thread that's currently running. Handy for a number
       of things, including cleaning up at the end of your
       program:

16/Sep/1999	       perl 5.005, patch 03		       18

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

	   # Loop through all the threads
	   foreach $thr (Thread->list) {
	       # Don't join the main thread or ourselves
	       if ($thr->tid && !Thread::equal($thr, Thread->self)) {
		   $thr->join;
	       }
	   }

       The example above is just for illustration. It isn't
       strictly necessary to join all the threads you create,
       since Perl detaches all the threads before it exits.

A Complete Example
       Confused yet? It's time for an example program to show
       some of the things we've covered. This program finds prime
       numbers using threads.

	   1  #!/usr/bin/perl -w
	   2  # prime-pthread, courtesy of Tom Christiansen
	   3
	   4  use strict;
	   5
	   6  use Thread;
	   7  use Thread::Queue;
	   8
	   9  my $stream = new Thread::Queue;
	   10 my $kid	 = new Thread(\&check_num, $stream, 2);
	   11
	   12 for my $i ( 3 .. 1000 ) {
	   13	  $stream->enqueue($i);
	   14 }
	   15
	   16 $stream->enqueue(undef);
	   17 $kid->join();
	   18
	   19 sub check_num {
	   20	  my ($upstream, $cur_prime) = @_;
	   21	  my $kid;
	   22	  my $downstream = new Thread::Queue;
	   23	  while (my $num = $upstream->dequeue) {
	   24	      next unless $num % $cur_prime;
	   25	      if ($kid) {
	   26		 $downstream->enqueue($num);
	   27		       } else {
	   28		 print "Found prime $num\n";
	   29		     $kid = new Thread(\&check_num, $downstream, $num);
	   30	      }
	   31	  }
	   32	  $downstream->enqueue(undef) if $kid;
	   33	  $kid->join()	       if $kid;
	   34 }

       This program uses the pipeline model to generate prime
       numbers. Each thread in the pipeline has an input queue

16/Sep/1999	       perl 5.005, patch 03		       19

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

       that feeds numbers to be checked, a prime number that it's
       responsible for, and an output queue that it funnels
       numbers that have failed the check into. If the thread has
       a number that's failed its check and there's no child
       thread, then the thread must have found a new prime
       number. In that case, a new child thread is created for
       that prime and stuck on the end of the pipeline.

       This probably sounds a bit more confusing than it really
       is, so lets go through this program piece by piece and see
       what it does.  (For those of you who might be trying to
       remember exactly what a prime number is, it's a number
       that's only evenly divisible by itself and 1)

       The bulk of the work is done by the check_num()
       subroutine, which takes a reference to its input queue and
       a prime number that it's responsible for. After pulling in
       the input queue and the prime that the subroutine's
       checking (line 20), we create a new queue (line 22) and
       reserve a scalar for the thread that we're likely to
       create later (line 21).

       The while loop from lines 23 to line 31 grabs a scalar off
       the input queue and checks against the prime this thread
       is responsible for. Line 24 checks to see if there's a
       remainder when we modulo the number to be checked against
       our prime. If there is one, the number must not be evenly
       divisible by our prime, so we need to either pass it on to
       the next thread if we've created one (line 26) or create a
       new thread if we haven't.

       The new thread creation is line 29. We pass on to it a
       reference to the queue we've created, and the prime number
       we've found.

       Finally, once the loop terminates (because we got a 0 or
       undef in the queue, which serves as a note to die), we
       pass on the notice to our child and wait for it to exit if
       we've created a child (Lines 32 and 37).

       Meanwhile, back in the main thread, we create a queue
       (line 9) and the initial child thread (line 10), and pre-
       seed it with the first prime: 2. Then we queue all the
       numbers from 3 to 1000 for checking (lines 12-14), then
       queue a die notice (line 16) and wait for the first child
       thread to terminate (line 17). Because a child won't die
       until its child has died, we know that we're done once we
       return from the join.

       That's how it works. It's pretty simple; as with many Perl
       programs, the explanation is much longer than the program.

Conclusion
       A complete thread tutorial could fill a book (and has,

16/Sep/1999	       perl 5.005, patch 03		       20

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

       many times), but this should get you well on your way. The
       final authority on how Perl's threads behave is the
       documention bundled with the Perl distribution, but with
       what we've covered in this article, you should be well on
       your way to becoming a threaded Perl expert.

Bibliography
       Here's a short bibliography courtesy of Jurgen
       Christoffel:

       Introductory Texts

       Birrell, Andrew D. An Introduction to Programming with
       Threads. Digital Equipment Corporation, 1989, DEC-SRC
       Research Report #35 online as
       http://www.research.digital.com/SRC/staff/birrell/bib.html
       (highly recommended)

       Robbins, Kay. A., and Steven Robbins. Practical Unix
       Programming: A Guide to Concurrency, Communication, and
       Multithreading. Prentice-Hall, 1996.

       Lewis, Bill, and Daniel J. Berg. Multithreaded Programming
       with Pthreads. Prentice Hall, 1997, ISBN 0-13-443698-9 (a
       well-written introduction to threads).

       Nelson, Greg (editor). Systems Programming with Modula-3.
       Prentice Hall, 1991, ISBN 0-13-590464-1.

       Nichols, Bradford, Dick Buttlar, and Jacqueline Proulx
       Farrell.	 Pthreads Programming. O'Reilly & Associates,
       1996, ISBN 156592-115-1 (covers POSIX threads).

       OS-Related References

       Boykin, Joseph, David Kirschen, Alan Langerman, and Susan
       LoVerso. Programming under Mach. Addison-Wesley, 1994,
       ISBN 0-201-52739-1.

       Tanenbaum, Andrew S. Distributed Operating Systems.
       Prentice Hall, 1995, ISBN 0-13-143934-0 (great textbook).

       Silberschatz, Abraham, and Peter B. Galvin. Operating
       System Concepts, 4th ed. Addison-Wesley, 1995, ISBN
       0-201-59292-4

       Other References

       Arnold, Ken and James Gosling. The Java Programming
       Language, 2nd ed. Addison-Wesley, 1998, ISBN
       0-201-31006-6.

       Le Sergent, T. and B. Berthomieu. "Incremental
       MultiThreaded Garbage Collection on Virtually Shared

16/Sep/1999	       perl 5.005, patch 03		       21

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

       Memory Architectures" in Memory Management: Proc. of the
       International Workshop IWMM 92, St. Malo, France,
       September 1992, Yves Bekkers and Jacques Cohen, eds.
       Springer, 1992, ISBN 3540-55940-X (real-life thread
       applications).

Acknowledgements
       Thanks (in no particular order) to Chaim Frenkel, Steve
       Fink, Gurusamy Sarathy, Ilya Zakharevich, Benjamin Sugars,
       Jurgen Christoffel, Joshua Pritikin, and Alan Burlison,
       for their help in reality-checking and polishing this
       article. Big thanks to Tom Christiansen for his rewrite of
       the prime number generator.

AUTHOR
       Dan Sugalski <sugalskd@ous.edu>

Copyrights
       This article originally appeared in The Perl Journal #10,
       and is copyright 1998 The Perl Journal. It appears
       courtesy of Jon Orwant and The Perl Journal.  This
       document may be distributed under the same terms as Perl
       itself.

16/Sep/1999	       perl 5.005, patch 03		       22

PERLTHRTUT(1)	 Perl Programmers Reference Guide   PERLTHRTUT(1)

16/Sep/1999	       perl 5.005, patch 03		       23

[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server BSDOS

List of man pages available for BSDOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net