PERLPOD(1) Perl Programmers Reference Guide PERLPOD(1)NAMEperlpod - plain old documentation
DESCRIPTION
A pod-to-whatever translator reads a pod file paragraph by
paragraph, and translates it to the appropriate output
format. There are three kinds of paragraphs: verbatim,
command, and ordinary text.
Verbatim Paragraph
A verbatim paragraph, distinguished by being indented
(that is, it starts with space or tab). It should be
reproduced exactly, with tabs assumed to be on 8-column
boundaries. There are no special formatting escapes, so
you can't italicize or anything like that. A \ means \,
and nothing else.
Command Paragraph
All command paragraphs start with "=", followed by an
identifier, followed by arbitrary text that the command
can use however it pleases. Currently recognized commands
are
=head1 heading
=head2 heading
=item text
=over N
=back
=cut
=pod
=for X
=begin X
=end X
=pod
=cut
The "=pod" directive does nothing beyond telling the
compiler to lay off parsing code through the next
"=cut". It's useful for adding another paragraph to
the doc if you're mixing up code and pod a lot.
=head1
=head2
Head1 and head2 produce first and second level
headings, with the text in the same paragraph as the
"=headn" directive forming the heading description.
=over
16/Sep/1999 perl 5.005, patch 03 1
PERLPOD(1) Perl Programmers Reference Guide PERLPOD(1)
=back
=item
Item, over, and back require a little more
explanation: "=over" starts a section specifically for
the generation of a list using "=item" commands. At
the end of your list, use "=back" to end it. You will
probably want to give "4" as the number to "=over", as
some formatters will use this for indentation. This
should probably be a default. Note also that there are
some basic rules to using =item: don't use them
outside of an =over/=back block, use at least one
inside an =over/=back block, you don't _have_ to
include the =back if the list just runs off the
document, and perhaps most importantly, keep the items
consistent: either use "=item *" for all of them, to
produce bullets, or use "=item 1.", "=item 2.", etc.,
to produce numbered lists, or use "=item foo", "=item
bar", etc., i.e., things that looks nothing like
bullets or numbers. If you start with bullets or
numbers, stick with them, as many formatters use the
first "=item" type to decide how to format the list.
=for
=begin
=end
For, begin, and end let you include sections that are
not interpreted as pod text, but passed directly to
particular formatters. A formatter that can utilize
that format will use the section, otherwise it will be
completely ignored. The directive "=for" specifies
that the entire next paragraph is in the format
indicated by the first word after "=for", like this:
=for html <br>
<p> This is a raw HTML paragraph </p>
The paired commands "=begin" and "=end" work very
similarly to "=for", but instead of only accepting a
single paragraph, all text from "=begin" to a
paragraph with a matching "=end" are treated as a
particular format.
Here are some examples of how to use these:
=begin html
<br>Figure 1.<IMG SRC="figure1.png"><br>
=end html
=begin text
16/Sep/1999 perl 5.005, patch 03 2
PERLPOD(1) Perl Programmers Reference Guide PERLPOD(1)---------------
| foo |
| bar |
---------------
^^^^ Figure 1. ^^^^
=end text
Some format names that formatters currently are known
to accept include "roff", "man", "latex", "tex",
"text", and "html". (Some formatters will treat some
of these as synonyms.)
And don't forget, when using any command, that the
command lasts up until the end of the paragraph, not
the line. Hence in the examples below, you can see the
empty lines after each command to end its paragraph.
Some examples of lists include:
=over 4
=item *
First item
=item *
Second item
=back
=over 4
=item Foo()
Description of Foo function
=item Bar()
Description of Bar function
=back
Ordinary Block of Text
It will be filled, and maybe even justified. Certain
interior sequences are recognized both here and in
commands:
16/Sep/1999 perl 5.005, patch 03 3
PERLPOD(1) Perl Programmers Reference Guide PERLPOD(1)
I<text> italicize text, used for emphasis or variables
B<text> embolden text, used for switches and programs
S<text> text contains non-breaking spaces
C<code> literal code
L<name> A link (cross reference) to name
L<name> manual page
L<name/ident> item in manual page
L<name/"sec"> section in other manual page
L<"sec"> section in this manual page
(the quotes are optional)
L</"sec"> ditto
same as above but only 'text' is used for output.
(Text can not contain the characters '/' and '|',
and should contain matched '<' or '>')
L<text|name>
L<text|name/ident>
L<text|name/"sec">
L<text|"sec">
L<text|/"sec">
F<file> Used for filenames
X<index> An index entry
Z<> A zero-width character
E<escape> A named character (very similar to HTML escapes)
E<lt> A literal <
E<gt> A literal >
E<sol> A literal /
E<verbar> A literal |
(these are optional except in other interior
sequences and when preceded by a capital letter)
E<n> Character number n (probably in ASCII)
E<html> Some non-numeric HTML entity, such
as E<Agrave>
The Intent
That's it. The intent is simplicity, not power. I wanted
paragraphs to look like paragraphs (block format), so that
they stand out visually, and so that I could run them
through fmt easily to reformat them (that's F7 in my
version of vi). I wanted the translator (and not me) to
worry about whether " or ' is a left quote or a right
quote within filled text, and I wanted it to leave the
quotes alone, dammit, in verbatim mode, so I could slurp
in a working program, shift it over 4 spaces, and have it
print out, er, verbatim. And presumably in a constant
width font.
In particular, you can leave things like this verbatim in
your text:
16/Sep/1999 perl 5.005, patch 03 4
PERLPOD(1) Perl Programmers Reference Guide PERLPOD(1)
Perl
FILEHANDLE
$variable
function()manpage(3r)
Doubtless a few other commands or sequences will need to
be added along the way, but I've gotten along surprisingly
well with just these.
Note that I'm not at all claiming this to be sufficient
for producing a book. I'm just trying to make an idiot-
proof common source for nroff, TeX, and other markup
languages, as used for online documentation. Translators
exist for pod2man (that's for nroff(1) and troff(1)),
pod2text, pod2html, pod2latex, and pod2fm.
Embedding Pods in Perl Modules
You can embed pod documentation in your Perl scripts.
Start your documentation with a "=head1" command at the
beginning, and end it with a "=cut" command. Perl will
ignore the pod text. See any of the supplied library
modules for examples. If you're going to put your pods at
the end of the file, and you're using an __END__ or
__DATA__ cut mark, make sure to put an empty line there
before the first pod directive.
__END__
=head1 NAME
modern - I am a modern module
If you had not had that empty line there, then the
translators wouldn't have seen it.
Common Pod Pitfalls
o Pod translators usually will require paragraphs to be
separated by completely empty lines. If you have an
apparently empty line with some spaces on it, this can
cause odd formatting.
o Translators will mostly add wording around a L<> link,
so that L<foo(1)> becomes "the foo(1) manpage", for
example (see pod2man for details). Thus, you
shouldn't write things like the L<foo> manpage, if you
want the translated document to read sensibly.
If you don need or want total control of the text used
for a link in the output use the form L<show this
text|foo> instead.
16/Sep/1999 perl 5.005, patch 03 5
PERLPOD(1) Perl Programmers Reference Guide PERLPOD(1)
o The script pod/checkpods.PL in the Perl source
distribution provides skeletal checking for lines that
look empty but aren't only, but is there as a
placeholder until someone writes Pod::Checker. The
best way to check your pod is to pass it through one
or more translators and proofread the result, or print
out the result and proofread that. Some of the
problems found may be bugs in the translators, which
you may or may not wish to work around.
SEE ALSO
the pod2man manpage and the section on PODs: Embedded
Documentation in the perlsyn manpage
AUTHOR
Larry Wall
16/Sep/1999 perl 5.005, patch 03 6
