PERLOP(1) Perl Programmers Reference Guide PERLOP(1)NAMEperlop - Perl operators and precedence
DESCRIPTION
Operator Precedence and Associativity
Operator precedence and associativity work in Perl more or less like
they do in mathematics.
Operator precedence means some operators are evaluated before others.
For example, in "2 + 4 * 5", the multiplication has higher precedence
so "4 * 5" is evaluated first yielding "2 + 20 == 22" and not "6 * 5 ==
30".
Operator associativity defines what happens if a sequence of the same
operators is used one after another: whether the evaluator will evalu‐
ate the left operations first or the right. For example, in "8 - 4 -
2", subtraction is left associative so Perl evaluates the expression
left to right. "8 - 4" is evaluated first making the expression "4 - 2
== 2" and not "8 - 2 == 6".
Perl operators have the following associativity and precedence, listed
from highest precedence to lowest. Operators borrowed from C keep the
same precedence relationship with each other, even where C's precedence
is slightly screwy. (This makes learning Perl easier for C folks.)
With very few exceptions, these all operate on scalar values only, not
array values.
left terms and list operators (leftward)
left ->
nonassoc ++ --
right **
right ! ~ \ and unary + and -
left =~ !~
left * / % x
left + - .
left << >>
nonassoc named unary operators
nonassoc < > <= >= lt gt le ge
nonassoc == != <=> eq ne cmp
left &
left ⎪ ^
left &&
left ⎪⎪
nonassoc .. ...
right ?:
right = += -= *= etc.
left , =>
nonassoc list operators (rightward)
right not
left and
left or xor
In the following sections, these operators are covered in precedence
order.
Many operators can be overloaded for objects. See overload.
Terms and List Operators (Leftward)
A TERM has the highest precedence in Perl. They include variables,
quote and quote-like operators, any expression in parentheses, and any
function whose arguments are parenthesized. Actually, there aren't
really functions in this sense, just list operators and unary operators
behaving as functions because you put parentheses around the arguments.
These are all documented in perlfunc.
If any list operator (print(), etc.) or any unary operator (chdir(),
etc.) is followed by a left parenthesis as the next token, the opera‐
tor and arguments within parentheses are taken to be of highest prece‐
dence, just like a normal function call.
In the absence of parentheses, the precedence of list operators such as
"print", "sort", or "chmod" is either very high or very low depending
on whether you are looking at the left side or the right side of the
operator. For example, in
@ary = (1, 3, sort 4, 2);
print @ary; # prints 1324
the commas on the right of the sort are evaluated before the sort, but
the commas on the left are evaluated after. In other words, list oper‐
ators tend to gobble up all arguments that follow, and then act like a
simple TERM with regard to the preceding expression. Be careful with
parentheses:
# These evaluate exit before doing the print:
print($foo, exit); # Obviously not what you want.
print $foo, exit; # Nor is this.
# These do the print before evaluating exit:
(print $foo), exit; # This is what you want.
print($foo), exit; # Or this.
print ($foo), exit; # Or even this.
Also note that
print ($foo & 255) + 1, "\n";
probably doesn't do what you expect at first glance. The parentheses
enclose the argument list for "print" which is evaluated (printing the
result of "$foo & 255"). Then one is added to the return value of
"print" (usually 1). The result is something like this:
1 + 1, "\n"; # Obviously not what you meant.
To do what you meant properly, you must write:
print(($foo & 255) + 1, "\n");
See "Named Unary Operators" for more discussion of this.
Also parsed as terms are the "do {}" and "eval {}" constructs, as well
as subroutine and method calls, and the anonymous constructors "[]" and
"{}".
See also "Quote and Quote-like Operators" toward the end of this sec‐
tion, as well as "I/O Operators".
The Arrow Operator
""->"" is an infix dereference operator, just as it is in C and C++.
If the right side is either a "[...]", "{...}", or a "(...)" subscript,
then the left side must be either a hard or symbolic reference to an
array, a hash, or a subroutine respectively. (Or technically speaking,
a location capable of holding a hard reference, if it's an array or
hash reference being used for assignment.) See perlreftut and perlref.
Otherwise, the right side is a method name or a simple scalar variable
containing either the method name or a subroutine reference, and the
left side must be either an object (a blessed reference) or a class
name (that is, a package name). See perlobj.
Auto-increment and Auto-decrement
"++" and "--" work as in C. That is, if placed before a variable, they
increment or decrement the variable by one before returning the value,
and if placed after, increment or decrement after returning the value.
$i = 0; $j = 0;
print $i++; # prints 0
print ++$j; # prints 1
Note that just as in C, Perl doesn't define when the variable is incre‐
mented or decremented. You just know it will be done sometime before or
after the value is returned. This also means that modifying a variable
twice in the same statement will lead to undefined behaviour. Avoid
statements like:
$i = $i ++;
print ++ $i + $i ++;
Perl will not guarantee what the result of the above statements is.
The auto-increment operator has a little extra builtin magic to it. If
you increment a variable that is numeric, or that has ever been used in
a numeric context, you get a normal increment. If, however, the vari‐
able has been used in only string contexts since it was set, and has a
value that is not the empty string and matches the pattern
"/^[a-zA-Z]*[0-9]*\z/", the increment is done as a string, preserving
each character within its range, with carry:
print ++($foo = '99'); # prints '100'
print ++($foo = 'a0'); # prints 'a1'
print ++($foo = 'Az'); # prints 'Ba'
print ++($foo = 'zz'); # prints 'aaa'
"undef" is always treated as numeric, and in particular is changed to 0
before incrementing (so that a post-increment of an undef value will
return 0 rather than "undef").
The auto-decrement operator is not magical.
Exponentiation
Binary "**" is the exponentiation operator. It binds even more tightly
than unary minus, so -2**4 is -(2**4), not (-2)**4. (This is imple‐
mented using C's pow(3) function, which actually works on doubles
internally.)
Symbolic Unary Operators
Unary "!" performs logical negation, i.e., "not". See also "not" for a
lower precedence version of this.
Unary "-" performs arithmetic negation if the operand is numeric. If
the operand is an identifier, a string consisting of a minus sign con‐
catenated with the identifier is returned. Otherwise, if the string
starts with a plus or minus, a string starting with the opposite sign
is returned. One effect of these rules is that -bareword is equivalent
to the string "-bareword". If, however, the string begins with a non-
alphabetic character (excluding "+" or "-"), Perl will attempt to con‐
vert the string to a numeric and the arithmetic negation is performed.
If the string cannot be cleanly converted to a numeric, Perl will give
the warning Argument "the string" isn't numeric in negation (-) at ....
Unary "~" performs bitwise negation, i.e., 1's complement. For exam‐
ple, "0666 & ~027" is 0640. (See also "Integer Arithmetic" and "Bit‐
wise String Operators".) Note that the width of the result is plat‐
form-dependent: ~0 is 32 bits wide on a 32-bit platform, but 64 bits
wide on a 64-bit platform, so if you are expecting a certain bit width,
remember to use the & operator to mask off the excess bits.
Unary "+" has no effect whatsoever, even on strings. It is useful syn‐
tactically for separating a function name from a parenthesized expres‐
sion that would otherwise be interpreted as the complete list of func‐
tion arguments. (See examples above under "Terms and List Operators
(Leftward)".)
Unary "\" creates a reference to whatever follows it. See perlreftut
and perlref. Do not confuse this behavior with the behavior of back‐
slash within a string, although both forms do convey the notion of pro‐
tecting the next thing from interpolation.
Binding Operators
Binary "=~" binds a scalar expression to a pattern match. Certain
operations search or modify the string $_ by default. This operator
makes that kind of operation work on some other string. The right
argument is a search pattern, substitution, or transliteration. The
left argument is what is supposed to be searched, substituted, or
transliterated instead of the default $_. When used in scalar context,
the return value generally indicates the success of the operation.
Behavior in list context depends on the particular operator. See "Reg‐
exp Quote-Like Operators" for details and perlretut for examples using
these operators.
If the right argument is an expression rather than a search pattern,
substitution, or transliteration, it is interpreted as a search pattern
at run time. Note that this means that its contents will be interpo‐
lated twice, so
'\\' =~ q'\\';
is not ok, as the regex engine will end up trying to compile the pat‐
tern "\", which it will consider a syntax error.
Binary "!~" is just like "=~" except the return value is negated in the
logical sense.
Multiplicative Operators
Binary "*" multiplies two numbers.
Binary "/" divides two numbers.
Binary "%" is the modulo operator, which computes the division remain‐
der of its first argument with respect to its second argument. Given
integer operands $a and $b: If $b is positive, then "$a % $b" is $a
minus the largest multiple of $b less than or equal to $a. If $b is
negative, then "$a % $b" is $a minus the smallest multiple of $b that
is not less than $a (i.e. the result will be less than or equal to
zero). If the operands $a and $b are floating point values and the
absolute value of $b (that is "abs($b)") is less than "(UV_MAX + 1)",
only the integer portion of $a and $b will be used in the operation
(Note: here "UV_MAX" means the maximum of the unsigned integer type).
If the absolute value of the right operand ("abs($b)") is greater than
or equal to "(UV_MAX + 1)", "%" computes the floating-point remainder
$r in the equation "($r = $a - $i*$b)" where $i is a certain integer
that makes $r have the same sign as the right operand $b (not as the
left operand $a like C function "fmod()") and the absolute value less
than that of $b. Note that when "use integer" is in scope, "%" gives
you direct access to the modulo operator as implemented by your C com‐
piler. This operator is not as well defined for negative operands, but
it will execute faster.
Binary "x" is the repetition operator. In scalar context or if the
left operand is not enclosed in parentheses, it returns a string con‐
sisting of the left operand repeated the number of times specified by
the right operand. In list context, if the left operand is enclosed in
parentheses or is a list formed by "qw/STRING/", it repeats the list.
If the right operand is zero or negative, it returns an empty string or
an empty list, depending on the context.
print '-' x 80; # print row of dashes
print "\t" x ($tab/8), ' ' x ($tab%8); # tab over
@ones = (1) x 80; # a list of 80 1's
@ones = (5) x @ones; # set all elements to 5
Additive Operators
Binary "+" returns the sum of two numbers.
Binary "-" returns the difference of two numbers.
Binary "." concatenates two strings.
Shift Operators
Binary "<<" returns the value of its left argument shifted left by the
number of bits specified by the right argument. Arguments should be
integers. (See also "Integer Arithmetic".)
Binary ">>" returns the value of its left argument shifted right by the
number of bits specified by the right argument. Arguments should be
integers. (See also "Integer Arithmetic".)
Note that both "<<" and ">>" in Perl are implemented directly using
"<<" and ">>" in C. If "use integer" (see "Integer Arithmetic") is in
force then signed C integers are used, else unsigned C integers are
used. Either way, the implementation isn't going to generate results
larger than the size of the integer type Perl was built with (32 bits
or 64 bits).
The result of overflowing the range of the integers is undefined
because it is undefined also in C. In other words, using 32-bit inte‐
gers, "1 << 32" is undefined. Shifting by a negative number of bits is
also undefined.
Named Unary Operators
The various named unary operators are treated as functions with one
argument, with optional parentheses.
If any list operator (print(), etc.) or any unary operator (chdir(),
etc.) is followed by a left parenthesis as the next token, the opera‐
tor and arguments within parentheses are taken to be of highest prece‐
dence, just like a normal function call. For example, because named
unary operators are higher precedence than ⎪⎪:
chdir $foo ⎪⎪ die; # (chdir $foo) ⎪⎪ die
chdir($foo) ⎪⎪ die; # (chdir $foo) ⎪⎪ die
chdir ($foo) ⎪⎪ die; # (chdir $foo) ⎪⎪ die
chdir +($foo) ⎪⎪ die; # (chdir $foo) ⎪⎪ die
but, because * is higher precedence than named operators:
chdir $foo * 20; # chdir ($foo * 20)
chdir($foo) * 20; # (chdir $foo) * 20
chdir ($foo) * 20; # (chdir $foo) * 20
chdir +($foo) * 20; # chdir ($foo * 20)
rand 10 * 20; # rand (10 * 20)
rand(10) * 20; # (rand 10) * 20
rand (10) * 20; # (rand 10) * 20
rand +(10) * 20; # rand (10 * 20)
Regarding precedence, the filetest operators, like "-f", "-M", etc. are
treated like named unary operators, but they don't follow this func‐
tional parenthesis rule. That means, for example, that
"-f($file).".bak"" is equivalent to "-f "$file.bak"".
See also "Terms and List Operators (Leftward)".
Relational Operators
Binary "<" returns true if the left argument is numerically less than
the right argument.
Binary ">" returns true if the left argument is numerically greater
than the right argument.
Binary "<=" returns true if the left argument is numerically less than
or equal to the right argument.
Binary ">=" returns true if the left argument is numerically greater
than or equal to the right argument.
Binary "lt" returns true if the left argument is stringwise less than
the right argument.
Binary "gt" returns true if the left argument is stringwise greater
than the right argument.
Binary "le" returns true if the left argument is stringwise less than
or equal to the right argument.
Binary "ge" returns true if the left argument is stringwise greater
than or equal to the right argument.
Equality Operators
Binary "==" returns true if the left argument is numerically equal to
the right argument.
Binary "!=" returns true if the left argument is numerically not equal
to the right argument.
Binary "<=>" returns -1, 0, or 1 depending on whether the left argument
is numerically less than, equal to, or greater than the right argument.
If your platform supports NaNs (not-a-numbers) as numeric values, using
them with "<=>" returns undef. NaN is not "<", "==", ">", "<=" or ">="
anything (even NaN), so those 5 return false. NaN != NaN returns true,
as does NaN != anything else. If your platform doesn't support NaNs
then NaN is just a string with numeric value 0.
perl -le '$a = "NaN"; print "No NaN support here" if $a == $a'
perl -le '$a = "NaN"; print "NaN support here" if $a != $a'
Binary "eq" returns true if the left argument is stringwise equal to
the right argument.
Binary "ne" returns true if the left argument is stringwise not equal
to the right argument.
Binary "cmp" returns -1, 0, or 1 depending on whether the left argument
is stringwise less than, equal to, or greater than the right argument.
"lt", "le", "ge", "gt" and "cmp" use the collation (sort) order speci‐
fied by the current locale if "use locale" is in effect. See perllo‐
cale.
Bitwise And
Binary "&" returns its operands ANDed together bit by bit. (See also
"Integer Arithmetic" and "Bitwise String Operators".)
Note that "&" has lower priority than relational operators, so for
example the brackets are essential in a test like
print "Even\n" if ($x & 1) == 0;
Bitwise Or and Exclusive Or
Binary "⎪" returns its operands ORed together bit by bit. (See also
"Integer Arithmetic" and "Bitwise String Operators".)
Binary "^" returns its operands XORed together bit by bit. (See also
"Integer Arithmetic" and "Bitwise String Operators".)
Note that "⎪" and "^" have lower priority than relational operators, so
for example the brackets are essential in a test like
print "false\n" if (8 ⎪ 2) != 10;
C-style Logical And
Binary "&&" performs a short-circuit logical AND operation. That is,
if the left operand is false, the right operand is not even evaluated.
Scalar or list context propagates down to the right operand if it is
evaluated.
C-style Logical Or
Binary "⎪⎪" performs a short-circuit logical OR operation. That is, if
the left operand is true, the right operand is not even evaluated.
Scalar or list context propagates down to the right operand if it is
evaluated.
The "⎪⎪" and "&&" operators return the last value evaluated (unlike C's
"⎪⎪" and "&&", which return 0 or 1). Thus, a reasonably portable way to
find out the home directory might be:
$home = $ENV{'HOME'} ⎪⎪ $ENV{'LOGDIR'} ⎪⎪
(getpwuid($<))[7] ⎪⎪ die "You're homeless!\n";
In particular, this means that you shouldn't use this for selecting
between two aggregates for assignment:
@a = @b ⎪⎪ @c; # this is wrong
@a = scalar(@b) ⎪⎪ @c; # really meant this
@a = @b ? @b : @c; # this works fine, though
As more readable alternatives to "&&" and "⎪⎪" when used for control
flow, Perl provides "and" and "or" operators (see below). The short-
circuit behavior is identical. The precedence of "and" and "or" is
much lower, however, so that you can safely use them after a list oper‐
ator without the need for parentheses:
unlink "alpha", "beta", "gamma"
or gripe(), next LINE;
With the C-style operators that would have been written like this:
unlink("alpha", "beta", "gamma")
⎪⎪ (gripe(), next LINE);
Using "or" for assignment is unlikely to do what you want; see below.
Range Operators
Binary ".." is the range operator, which is really two different opera‐
tors depending on the context. In list context, it returns a list of
values counting (up by ones) from the left value to the right value.
If the left value is greater than the right value then it returns the
empty list. The range operator is useful for writing "foreach (1..10)"
loops and for doing slice operations on arrays. In the current imple‐
mentation, no temporary array is created when the range operator is
used as the expression in "foreach" loops, but older versions of Perl
might burn a lot of memory when you write something like this:
for (1 .. 1_000_000) {
# code
}
The range operator also works on strings, using the magical auto-incre‐
ment, see below.
In scalar context, ".." returns a boolean value. The operator is
bistable, like a flip-flop, and emulates the line-range (comma) opera‐
tor of sed, awk, and various editors. Each ".." operator maintains its
own boolean state. It is false as long as its left operand is false.
Once the left operand is true, the range operator stays true until the
right operand is true, AFTER which the range operator becomes false
again. It doesn't become false till the next time the range operator
is evaluated. It can test the right operand and become false on the
same evaluation it became true (as in awk), but it still returns true
once. If you don't want it to test the right operand till the next
evaluation, as in sed, just use three dots ("...") instead of two. In
all other regards, "..." behaves just like ".." does.
The right operand is not evaluated while the operator is in the "false"
state, and the left operand is not evaluated while the operator is in
the "true" state. The precedence is a little lower than ⎪⎪ and &&.
The value returned is either the empty string for false, or a sequence
number (beginning with 1) for true. The sequence number is reset for
each range encountered. The final sequence number in a range has the
string "E0" appended to it, which doesn't affect its numeric value, but
gives you something to search for if you want to exclude the endpoint.
You can exclude the beginning point by waiting for the sequence number
to be greater than 1.
If either operand of scalar ".." is a constant expression, that operand
is considered true if it is equal ("==") to the current input line num‐
ber (the $. variable).
To be pedantic, the comparison is actually "int(EXPR) == int(EXPR)",
but that is only an issue if you use a floating point expression; when
implicitly using $. as described in the previous paragraph, the compar‐
ison is "int(EXPR) == int($.)" which is only an issue when $. is set
to a floating point value and you are not reading from a file. Fur‐
thermore, "span" .. "spat" or "2.18 .. 3.14" will not do what you want
in scalar context because each of the operands are evaluated using
their integer representation.
Examples:
As a scalar operator:
if (101 .. 200) { print; } # print 2nd hundred lines, short for
# if ($. == 101 .. $. == 200) ...
next LINE if (1 .. /^$/); # skip header lines, short for
# ... if ($. == 1 .. /^$/);
# (typically in a loop labeled LINE)
s/^/> / if (/^$/ .. eof()); # quote body
# parse mail messages
while (<>) {
$in_header = 1 .. /^$/;
$in_body = /^$/ .. eof;
if ($in_header) {
# ...
} else { # in body
# ...
}
} continue {
close ARGV if eof; # reset $. each file
}
Here's a simple example to illustrate the difference between the two
range operators:
@lines = (" - Foo",
"01 - Bar",
"1 - Baz",
" - Quux");
foreach (@lines) {
if (/0/ .. /1/) {
print "$_\n";
}
}
This program will print only the line containing "Bar". If the range
operator is changed to "...", it will also print the "Baz" line.
And now some examples as a list operator:
for (101 .. 200) { print; } # print $_ 100 times
@foo = @foo[0 .. $#foo]; # an expensive no-op
@foo = @foo[$#foo-4 .. $#foo]; # slice last 5 items
The range operator (in list context) makes use of the magical auto-
increment algorithm if the operands are strings. You can say
@alphabet = ('A' .. 'Z');
to get all normal letters of the English alphabet, or
$hexdigit = (0 .. 9, 'a' .. 'f')[$num & 15];
to get a hexadecimal digit, or
@z2 = ('01' .. '31'); print $z2[$mday];
to get dates with leading zeros.
If the final value specified is not in the sequence that the magical
increment would produce, the sequence goes until the next value would
be longer than the final value specified.
If the initial value specified isn't part of a magical increment
sequence (that is, a non-empty string matching "/^[a-zA-Z]*[0-9]*\z/"),
only the initial value will be returned. So the following will only
return an alpha:
use charnames 'greek';
my @greek_small = ("\N{alpha}" .. "\N{omega}");
To get lower-case greek letters, use this instead:
my @greek_small = map { chr } ( ord("\N{alpha}") .. ord("\N{omega}") );
Because each operand is evaluated in integer form, "2.18 .. 3.14" will
return two elements in list context.
@list = (2.18 .. 3.14); # same as @list = (2 .. 3);
Conditional Operator
Ternary "?:" is the conditional operator, just as in C. It works much
like an if-then-else. If the argument before the ? is true, the argu‐
ment before the : is returned, otherwise the argument after the : is
returned. For example:
printf "I have %d dog%s.\n", $n,
($n == 1) ? '' : "s";
Scalar or list context propagates downward into the 2nd or 3rd argu‐
ment, whichever is selected.
$a = $ok ? $b : $c; # get a scalar
@a = $ok ? @b : @c; # get an array
$a = $ok ? @b : @c; # oops, that's just a count!
The operator may be assigned to if both the 2nd and 3rd arguments are
legal lvalues (meaning that you can assign to them):
($a_or_b ? $a : $b) = $c;
Because this operator produces an assignable result, using assignments
without parentheses will get you in trouble. For example, this:
$a % 2 ? $a += 10 : $a += 2
Really means this:
(($a % 2) ? ($a += 10) : $a) += 2
Rather than this:
($a % 2) ? ($a += 10) : ($a += 2)
That should probably be written more simply as:
$a += ($a % 2) ? 10 : 2;
Assignment Operators
"=" is the ordinary assignment operator.
Assignment operators work as in C. That is,
$a += 2;
is equivalent to
$a = $a + 2;
although without duplicating any side effects that dereferencing the
lvalue might trigger, such as from tie(). Other assignment operators
work similarly. The following are recognized:
**= += *= &= <<= &&=
-= /= ⎪= >>= ⎪⎪=
.= %= ^=
x=
Although these are grouped by family, they all have the precedence of
assignment.
Unlike in C, the scalar assignment operator produces a valid lvalue.
Modifying an assignment is equivalent to doing the assignment and then
modifying the variable that was assigned to. This is useful for modi‐
fying a copy of something, like this:
($tmp = $global) =~ tr [A-Z] [a-z];
Likewise,
($a += 2) *= 3;
is equivalent to
$a += 2;
$a *= 3;
Similarly, a list assignment in list context produces the list of lval‐
ues assigned to, and a list assignment in scalar context returns the
number of elements produced by the expression on the right hand side of
the assignment.
Comma Operator
Binary "," is the comma operator. In scalar context it evaluates its
left argument, throws that value away, then evaluates its right argu‐
ment and returns that value. This is just like C's comma operator.
In list context, it's just the list argument separator, and inserts
both its arguments into the list. These arguments are also evaluated
from left to right.
The "=>" operator is a synonym for the comma, but forces any word (con‐
sisting entirely of word characters) to its left to be interpreted as a
string (as of 5.001). This includes words that might otherwise be con‐
sidered a constant or function call.
use constant FOO => "something";
my %h = ( FOO => 23 );
is equivalent to:
my %h = ("FOO", 23);
It is NOT:
my %h = ("something", 23);
If the argument on the left is not a word, it is first interpreted as
an expression, and then the string value of that is used.
The "=>" operator is helpful in documenting the correspondence between
keys and values in hashes, and other paired elements in lists.
%hash = ( $key => $value );
login( $username => $password );
List Operators (Rightward)
On the right side of a list operator, it has very low precedence, such
that it controls all comma-separated expressions found there. The only
operators with lower precedence are the logical operators "and", "or",
and "not", which may be used to evaluate calls to list operators with‐
out the need for extra parentheses:
open HANDLE, "filename"
or die "Can't open: $!\n";
See also discussion of list operators in "Terms and List Operators
(Leftward)".
Logical Not
Unary "not" returns the logical negation of the expression to its
right. It's the equivalent of "!" except for the very low precedence.
Logical And
Binary "and" returns the logical conjunction of the two surrounding
expressions. It's equivalent to && except for the very low precedence.
This means that it short-circuits: i.e., the right expression is evalu‐
ated only if the left expression is true.
Logical or and Exclusive Or
Binary "or" returns the logical disjunction of the two surrounding
expressions. It's equivalent to ⎪⎪ except for the very low precedence.
This makes it useful for control flow
print FH $data or die "Can't write to FH: $!";
This means that it short-circuits: i.e., the right expression is evalu‐
ated only if the left expression is false. Due to its precedence, you
should probably avoid using this for assignment, only for control flow.
$a = $b or $c; # bug: this is wrong
($a = $b) or $c; # really means this
$a = $b ⎪⎪ $c; # better written this way
However, when it's a list-context assignment and you're trying to use
"⎪⎪" for control flow, you probably need "or" so that the assignment
takes higher precedence.
@info = stat($file) ⎪⎪ die; # oops, scalar sense of stat!
@info = stat($file) or die; # better, now @info gets its due
Then again, you could always use parentheses.
Binary "xor" returns the exclusive-OR of the two surrounding expres‐
sions. It cannot short circuit, of course.
C Operators Missing From Perl
Here is what C has that Perl doesn't:
unary & Address-of operator. (But see the "\" operator for taking a
reference.)
unary * Dereference-address operator. (Perl's prefix dereferencing
operators are typed: $, @, %, and &.)
(TYPE) Type-casting operator.
Quote and Quote-like Operators
While we usually think of quotes as literal values, in Perl they func‐
tion as operators, providing various kinds of interpolating and pattern
matching capabilities. Perl provides customary quote characters for
these behaviors, but also provides a way for you to choose your quote
character for any of them. In the following table, a "{}" represents
any pair of delimiters you choose.
Customary Generic Meaning Interpolates
'' q{} Literal no
"" qq{} Literal yes
`` qx{} Command yes*
qw{} Word list no
// m{} Pattern match yes*
qr{} Pattern yes*
s{}{} Substitution yes*
tr{}{} Transliteration no (but see below)
<<EOF here-doc yes*
* unless the delimiter is ''.
Non-bracketing delimiters use the same character fore and aft, but the
four sorts of brackets (round, angle, square, curly) will all nest,
which means that
q{foo{bar}baz}
is the same as
'foo{bar}baz'
Note, however, that this does not always work for quoting Perl code:
$s = q{ if($a eq "}") ... }; # WRONG
is a syntax error. The "Text::Balanced" module (from CPAN, and starting
from Perl 5.8 part of the standard distribution) is able to do this
properly.
There can be whitespace between the operator and the quoting charac‐
ters, except when "#" is being used as the quoting character. "q#foo#"
is parsed as the string "foo", while "q #foo#" is the operator "q" fol‐
lowed by a comment. Its argument will be taken from the next line.
This allows you to write:
s {foo} # Replace foo
{bar} # with bar.
The following escape sequences are available in constructs that inter‐
polate and in transliterations.
\t tab (HT, TAB)
\n newline (NL)
\r return (CR)
\f form feed (FF)
\b backspace (BS)
\a alarm (bell) (BEL)
\e escape (ESC)
\033 octal char (example: ESC)
\x1b hex char (example: ESC)
\x{263a} wide hex char (example: SMILEY)
\c[ control char (example: ESC)
\N{name} named Unicode character
The character following "\c" is mapped to some other character by con‐
verting letters to upper case and then (on ASCII systems) by inverting
the 7th bit (0x40). The most interesting range is from '@' to '_' (0x40
through 0x5F), resulting in a control character from 0x00 through 0x1F.
A '?' maps to the DEL character. On EBCDIC systems only '@', the let‐
ters, '[', '\', ']', '^', '_' and '?' will work, resulting in 0x00
through 0x1F and 0x7F.
NOTE: Unlike C and other languages, Perl has no \v escape sequence for
the vertical tab (VT - ASCII 11), but you may use "\ck" or "\x0b".
The following escape sequences are available in constructs that inter‐
polate but not in transliterations.
\l lowercase next char
\u uppercase next char
\L lowercase till \E
\U uppercase till \E
\E end case modification
\Q quote non-word characters till \E
If "use locale" is in effect, the case map used by "\l", "\L", "\u" and
"\U" is taken from the current locale. See perllocale. If Unicode
(for example, "\N{}" or wide hex characters of 0x100 or beyond) is
being used, the case map used by "\l", "\L", "\u" and "\U" is as
defined by Unicode. For documentation of "\N{name}", see charnames.
All systems use the virtual "\n" to represent a line terminator, called
a "newline". There is no such thing as an unvarying, physical newline
character. It is only an illusion that the operating system, device
drivers, C libraries, and Perl all conspire to preserve. Not all sys‐
tems read "\r" as ASCII CR and "\n" as ASCII LF. For example, on a
Mac, these are reversed, and on systems without line terminator, print‐
ing "\n" may emit no actual data. In general, use "\n" when you mean a
"newline" for your system, but use the literal ASCII when you need an
exact character. For example, most networking protocols expect and
prefer a CR+LF ("\015\012" or "\cM\cJ") for line terminators, and
although they often accept just "\012", they seldom tolerate just
"\015". If you get in the habit of using "\n" for networking, you may
be burned some day.
For constructs that do interpolate, variables beginning with ""$"" or
""@"" are interpolated. Subscripted variables such as $a[3] or
"$href->{key}[0]" are also interpolated, as are array and hash slices.
But method calls such as "$obj->meth" are not.
Interpolating an array or slice interpolates the elements in order,
separated by the value of $", so is equivalent to interpolating "join
$", @array". "Punctuation" arrays such as "@*" are only interpolated
if the name is enclosed in braces "@{*}", but special arrays @_, "@+",
and "@-" are interpolated, even without braces.
You cannot include a literal "$" or "@" within a "\Q" sequence. An
unescaped "$" or "@" interpolates the corresponding variable, while
escaping will cause the literal string "\$" to be inserted. You'll
need to write something like "m/\Quser\E\@\Qhost/".
Patterns are subject to an additional level of interpretation as a reg‐
ular expression. This is done as a second pass, after variables are
interpolated, so that regular expressions may be incorporated into the
pattern from the variables. If this is not what you want, use "\Q" to
interpolate a variable literally.
Apart from the behavior described above, Perl does not expand multiple
levels of interpolation. In particular, contrary to the expectations
of shell programmers, back-quotes do NOT interpolate within double
quotes, nor do single quotes impede evaluation of variables when used
within double quotes.
Regexp Quote-Like Operators
Here are the quote-like operators that apply to pattern matching and
related activities.
qr/STRING/msixo
This operator quotes (and possibly compiles) its STRING as a
regular expression. STRING is interpolated the same way as
PATTERN in "m/PATTERN/". If "'" is used as the delimiter, no
interpolation is done. Returns a Perl value which may be used
instead of the corresponding "/STRING/imosx" expression. The
returned value is a normalized version of the original pattern.
It magically differs from a string containing the same charac‐
ters: ref(qr/x/) returns "Regexp", even though dereferencing
the result returns undef.
For example,
$rex = qr/my.STRING/is;
print $rex; # prints (?si-xm:my.STRING)
s/$rex/foo/;
is equivalent to
s/my.STRING/foo/is;
The result may be used as a subpattern in a match:
$re = qr/$pattern/;
$string =~ /foo${re}bar/; # can be interpolated in other patterns
$string =~ $re; # or used standalone
$string =~ /$re/; # or this way
Since Perl may compile the pattern at the moment of execution
of qr() operator, using qr() may have speed advantages in some
situations, notably if the result of qr() is used standalone:
sub match {
my $patterns = shift;
my @compiled = map qr/$_/i, @$patterns;
grep {
my $success = 0;
foreach my $pat (@compiled) {
$success = 1, last if /$pat/;
}
$success;
} @_;
}
Precompilation of the pattern into an internal representation
at the moment of qr() avoids a need to recompile the pattern
every time a match "/$pat/" is attempted. (Perl has many other
internal optimizations, but none would be triggered in the
above example if we did not use qr() operator.)
Options are:
m Treat string as multiple lines.
s Treat string as single line. (Make . match a newline)
i Do case-insensitive pattern matching.
x Use extended regular expressions.
p When matching preserve a copy of the matched string so
that ${^PREMATCH}, ${^MATCH}, ${^POSTMATCH} will be defined.
o Compile pattern only once.
If a precompiled pattern is embedded in a larger pattern then
the effect of 'msix' will be propagated appropriately. The
effect of the 'o' modifier has is not propagated, being
restricted to those patterns explicitly using it.
See perlre for additional information on valid syntax for
STRING, and for a detailed look at the semantics of regular
expressions.
m/PATTERN/msixogc
/PATTERN/msixogc
Searches a string for a pattern match, and in scalar context
returns true if it succeeds, false if it fails. If no string
is specified via the "=~" or "!~" operator, the $_ string is
searched. (The string specified with "=~" need not be an
lvalue--it may be the result of an expression evaluation, but
remember the "=~" binds rather tightly.) See also perlre. See
perllocale for discussion of additional considerations that
apply when "use locale" is in effect.
Options are as described in "qr//"; in addition, the following
match process modifiers are available:
g Match globally, i.e., find all occurrences.
c Do not reset search position on a failed match when /g is in effect.
If "/" is the delimiter then the initial "m" is optional. With
the "m" you can use any pair of non-alphanumeric, non-white‐
space characters as delimiters. This is particularly useful
for matching path names that contain "/", to avoid LTS (leaning
toothpick syndrome). If "?" is the delimiter, then the match-
only-once rule of "?PATTERN?" applies. If "'" is the delim‐
iter, no interpolation is performed on the PATTERN.
PATTERN may contain variables, which will be interpolated (and
the pattern recompiled) every time the pattern search is evalu‐
ated, except for when the delimiter is a single quote. (Note
that $(, $), and $⎪ are not interpolated because they look like
end-of-string tests.) If you want such a pattern to be com‐
piled only once, add a "/o" after the trailing delimiter. This
avoids expensive run-time recompilations, and is useful when
the value you are interpolating won't change over the life of
the script. However, mentioning "/o" constitutes a promise
that you won't change the variables in the pattern. If you
change them, Perl won't even notice. See also
"qr/STRING/msixo".
The empty pattern //
If the PATTERN evaluates to the empty string, the last success‐
fully matched regular expression is used instead. In this case,
only the "g" and "c" flags on the empty pattern is honoured -
the other flags are taken from the original pattern. If no
match has previously succeeded, this will (silently) act
instead as a genuine empty pattern (which will always match).
Matching in list context
If the "/g" option is not used, "m//" in list context returns a
list consisting of the subexpressions matched by the parenthe‐
ses in the pattern, i.e., ($1, $2, $3...). (Note that here $1
etc. are also set, and that this differs from Perl 4's behav‐
ior.) When there are no parentheses in the pattern, the return
value is the list "(1)" for success. With or without parenthe‐
ses, an empty list is returned upon failure.
Examples:
open(TTY, '/dev/tty');
<TTY> =~ /^y/i && foo(); # do foo if desired
if (/Version: *([0-9.]*)/) { $version = $1; }
next if m#^/usr/spool/uucp#;
# poor man's grep
$arg = shift;
while (<>) {
print if /$arg/o; # compile only once
}
if (($F1, $F2, $Etc) = ($foo =~ /^(\S+)\s+(\S+)\s*(.*)/))
This last example splits $foo into the first two words and the
remainder of the line, and assigns those three fields to $F1,
$F2, and $Etc. The conditional is true if any variables were
assigned, i.e., if the pattern matched.
The "/g" modifier specifies global pattern matching--that is,
matching as many times as possible within the string. How it
behaves depends on the context. In list context, it returns a
list of the substrings matched by any capturing parentheses in
the regular expression. If there are no parentheses, it
returns a list of all the matched strings, as if there were
parentheses around the whole pattern.
In scalar context, each execution of "m//g" finds the next
match, returning true if it matches, and false if there is no
further match. The position after the last match can be read
or set using the pos() function; see "pos" in perlfunc. A
failed match normally resets the search position to the begin‐
ning of the string, but you can avoid that by adding the "/c"
modifier (e.g. "m//gc"). Modifying the target string also
resets the search position.
\G assertion
You can intermix "m//g" matches with "m/\G.../g", where "\G" is
a zero-width assertion that matches the exact position where
the previous "m//g", if any, left off. Without the "/g" modi‐
fier, the "\G" assertion still anchors at pos(), but the match
is of course only attempted once. Using "\G" without "/g" on a
target string that has not previously had a "/g" match applied
to it is the same as using the "\A" assertion to match the
beginning of the string. Note also that, currently, "\G" is
only properly supported when anchored at the very beginning of
the pattern.
Examples:
# list context
($one,$five,$fifteen) = (`uptime` =~ /(\d+\.\d+)/g);
# scalar context
$/ = "";
while (defined($paragraph = <>)) {
while ($paragraph =~ /[a-z]['")]*[.!?]+['")]*\s/g) {
$sentences++;
}
}
print "$sentences\n";
# using m//gc with \G
$_ = "ppooqppqq";
while ($i++ < 2) {
print "1: '";
print $1 while /(o)/gc; print "', pos=", pos, "\n";
print "2: '";
print $1 if /\G(q)/gc; print "', pos=", pos, "\n";
print "3: '";
print $1 while /(p)/gc; print "', pos=", pos, "\n";
}
print "Final: '$1', pos=",pos,"\n" if /\G(.)/;
The last example should print:
1: 'oo', pos=4
2: 'q', pos=5
3: 'pp', pos=7
1: '', pos=7
2: 'q', pos=8
3: '', pos=8
Final: 'q', pos=8
Notice that the final match matched "q" instead of "p", which a
match without the "\G" anchor would have done. Also note that
the final match did not update "pos" -- "pos" is only updated
on a "/g" match. If the final match did indeed match "p", it's
a good bet that you're running an older (pre-5.6.0) Perl.
A useful idiom for "lex"-like scanners is "/\G.../gc". You can
combine several regexps like this to process a string
part-by-part, doing different actions depending on which regexp
matched. Each regexp tries to match where the previous one
leaves off.
$_ = <<'EOL';
$url = URI::URL->new( "http://www/" ); die if $url eq "xXx";
EOL
LOOP:
{
print(" digits"), redo LOOP if /\G\d+\b[,.;]?\s*/gc;
print(" lowercase"), redo LOOP if /\G[a-z]+\b[,.;]?\s*/gc;
print(" UPPERCASE"), redo LOOP if /\G[A-Z]+\b[,.;]?\s*/gc;
print(" Capitalized"), redo LOOP if /\G[A-Z][a-z]+\b[,.;]?\s*/gc;
print(" MiXeD"), redo LOOP if /\G[A-Za-z]+\b[,.;]?\s*/gc;
print(" alphanumeric"), redo LOOP if /\G[A-Za-z0-9]+\b[,.;]?\s*/gc;
print(" line-noise"), redo LOOP if /\G[^A-Za-z0-9]+/gc;
print ". That's all!\n";
}
Here is the output (split into several lines):
line-noise lowercase line-noise lowercase UPPERCASE line-noise
UPPERCASE line-noise lowercase line-noise lowercase line-noise
lowercase lowercase line-noise lowercase lowercase line-noise
MiXeD line-noise. That's all!
?PATTERN?
This is just like the "/pattern/" search, except that it
matches only once between calls to the reset() operator. This
is a useful optimization when you want to see only the first
occurrence of something in each file of a set of files, for
instance. Only "??" patterns local to the current package are
reset.
while (<>) {
if (?^$?) {
# blank line between header and body
}
} continue {
reset if eof; # clear ?? status for next file
}
This usage is vaguely deprecated, which means it just might
possibly be removed in some distant future version of Perl,
perhaps somewhere around the year 2168.
s/PATTERN/REPLACEMENT/msixogce
Searches a string for a pattern, and if found, replaces that
pattern with the replacement text and returns the number of
substitutions made. Otherwise it returns false (specifically,
the empty string).
If no string is specified via the "=~" or "!~" operator, the $_
variable is searched and modified. (The string specified with
"=~" must be scalar variable, an array element, a hash element,
or an assignment to one of those, i.e., an lvalue.)
If the delimiter chosen is a single quote, no interpolation is
done on either the PATTERN or the REPLACEMENT. Otherwise, if
the PATTERN contains a $ that looks like a variable rather than
an end-of-string test, the variable will be interpolated into
the pattern at run-time. If you want the pattern compiled only
once the first time the variable is interpolated, use the "/o"
option. If the pattern evaluates to the empty string, the last
successfully executed regular expression is used instead. See
perlre for further explanation on these. See perllocale for
discussion of additional considerations that apply when "use
locale" is in effect.
Options are as with m// with the addition of the following
replacement specific options:
e Evaluate the right side as an expression.
ee Evaluate the right side as a string then eval the result
Any non-alphanumeric, non-whitespace delimiter may replace the
slashes. If single quotes are used, no interpretation is done
on the replacement string (the "/e" modifier overrides this,
however). Unlike Perl 4, Perl 5 treats backticks as normal
delimiters; the replacement text is not evaluated as a command.
If the PATTERN is delimited by bracketing quotes, the REPLACE‐
MENT has its own pair of quotes, which may or may not be brack‐
eting quotes, e.g., "s(foo)(bar)" or "s<foo>/bar/". A "/e"
will cause the replacement portion to be treated as a full-
fledged Perl expression and evaluated right then and there. It
is, however, syntax checked at compile-time. A second "e" modi‐
fier will cause the replacement portion to be "eval"ed before
being run as a Perl expression.
Examples:
s/\bgreen\b/mauve/g; # don't change wintergreen
$path =~ s⎪/usr/bin⎪/usr/local/bin⎪;
s/Login: $foo/Login: $bar/; # run-time pattern
($foo = $bar) =~ s/this/that/; # copy first, then change
$count = ($paragraph =~ s/Mister\b/Mr./g); # get change-count
$_ = 'abc123xyz';
s/\d+/$&*2/e; # yields 'abc246xyz'
s/\d+/sprintf("%5d",$&)/e; # yields 'abc 246xyz'
s/\w/$& x 2/eg; # yields 'aabbcc 224466xxyyzz'
s/%(.)/$percent{$1}/g; # change percent escapes; no /e
s/%(.)/$percent{$1} ⎪⎪ $&/ge; # expr now, so /e
s/^=(\w+)/pod($1)/ge; # use function call
# expand variables in $_, but dynamics only, using
# symbolic dereferencing
s/\$(\w+)/${$1}/g;
# Add one to the value of any numbers in the string
s/(\d+)/1 + $1/eg;
# This will expand any embedded scalar variable
# (including lexicals) in $_ : First $1 is interpolated
# to the variable name, and then evaluated
s/(\$\w+)/$1/eeg;
# Delete (most) C comments.
$program =~ s {
/\* # Match the opening delimiter.
.*? # Match a minimal number of characters.
\*/ # Match the closing delimiter.
} []gsx;
s/^\s*(.*?)\s*$/$1/; # trim whitespace in $_, expensively
for ($variable) { # trim whitespace in $variable, cheap
s/^\s+//;
s/\s+$//;
}
s/([^ ]*) *([^ ]*)/$2 $1/; # reverse 1st two fields
Note the use of $ instead of \ in the last example. Unlike
sed, we use the \<digit> form in only the left hand side. Any‐
where else it's $<digit>.
Occasionally, you can't use just a "/g" to get all the changes
to occur that you might want. Here are two common cases:
# put commas in the right places in an integer
1 while s/(\d)(\d\d\d)(?!\d)/$1,$2/g;
# expand tabs to 8-column spacing
1 while s/\t+/' ' x (length($&)*8 - length($`)%8)/e;
Quote-Like Operators
q/STRING/
'STRING'
A single-quoted, literal string. A backslash represents a back‐
slash unless followed by the delimiter or another backslash, in
which case the delimiter or backslash is interpolated.
$foo = q!I said, "You said, 'She said it.'"!;
$bar = q('This is it.');
$baz = '\n'; # a two-character string
qq/STRING/
"STRING"
A double-quoted, interpolated string.
$_ .= qq
(*** The previous line contains the naughty word "$1".\n)
if /\b(tcl⎪java⎪python)\b/i; # :-)
$baz = "\n"; # a one-character string
qx/STRING/
`STRING`
A string which is (possibly) interpolated and then executed as a
system command with "/bin/sh" or its equivalent. Shell wildcards,
pipes, and redirections will be honored. The collected standard
output of the command is returned; standard error is unaffected.
In scalar context, it comes back as a single (potentially
multi-line) string, or undef if the command failed. In list con‐
text, returns a list of lines (however you've defined lines with $/
or $INPUT_RECORD_SEPARATOR), or an empty list if the command
failed.
Because backticks do not affect standard error, use shell file
descriptor syntax (assuming the shell supports this) if you care to
address this. To capture a command's STDERR and STDOUT together:
$output = `cmd 2>&1`;
To capture a command's STDOUT but discard its STDERR:
$output = `cmd 2>/dev/null`;
To capture a command's STDERR but discard its STDOUT (ordering is
important here):
$output = `cmd 2>&1 1>/dev/null`;
To exchange a command's STDOUT and STDERR in order to capture the
STDERR but leave its STDOUT to come out the old STDERR:
$output = `cmd 3>&1 1>&2 2>&3 3>&-`;
To read both a command's STDOUT and its STDERR separately, it's
easiest to redirect them separately to files, and then read from
those files when the program is done:
system("program args 1>program.stdout 2>program.stderr");
The STDIN filehandle used by the command is inherited from Perl's
STDIN. For example:
open BLAM, "blam" ⎪⎪ die "Can't open: $!";
open STDIN, "<&BLAM";
print `sort`;
will print the sorted contents of the file "blam".
Using single-quote as a delimiter protects the command from Perl's
double-quote interpolation, passing it on to the shell instead:
$perl_info = qx(ps $$); # that's Perl's $$
$shell_info = qx'ps $$'; # that's the new shell's $$
How that string gets evaluated is entirely subject to the command
interpreter on your system. On most platforms, you will have to
protect shell metacharacters if you want them treated literally.
This is in practice difficult to do, as it's unclear how to escape
which characters. See perlsec for a clean and safe example of a
manual fork() and exec() to emulate backticks safely.
On some platforms (notably DOS-like ones), the shell may not be
capable of dealing with multiline commands, so putting newlines in
the string may not get you what you want. You may be able to eval‐
uate multiple commands in a single line by separating them with the
command separator character, if your shell supports that (e.g. ";"
on many Unix shells; "&" on the Windows NT "cmd" shell).
Beginning with v5.6.0, Perl will attempt to flush all files opened
for output before starting the child process, but this may not be
supported on some platforms (see perlport). To be safe, you may
need to set $⎪ ($AUTOFLUSH in English) or call the "autoflush()"
method of "IO::Handle" on any open handles.
Beware that some command shells may place restrictions on the
length of the command line. You must ensure your strings don't
exceed this limit after any necessary interpolations. See the
platform-specific release notes for more details about your partic‐
ular environment.
Using this operator can lead to programs that are difficult to
port, because the shell commands called vary between systems, and
may in fact not be present at all. As one example, the "type" com‐
mand under the POSIX shell is very different from the "type" com‐
mand under DOS. That doesn't mean you should go out of your way to
avoid backticks when they're the right way to get something done.
Perl was made to be a glue language, and one of the things it glues
together is commands. Just understand what you're getting yourself
into.
See "I/O Operators" for more discussion.
qw/STRING/
Evaluates to a list of the words extracted out of STRING, using
embedded whitespace as the word delimiters. It can be understood
as being roughly equivalent to:
split(' ', q/STRING/);
the differences being that it generates a real list at compile
time, and in scalar context it returns the last element in the
list. So this expression:
qw(foo bar baz)
is semantically equivalent to the list:
'foo', 'bar', 'baz'
Some frequently seen examples:
use POSIX qw( setlocale localeconv )
@EXPORT = qw( foo bar baz );
A common mistake is to try to separate the words with comma or to
put comments into a multi-line "qw"-string. For this reason, the
"use warnings" pragma and the -w switch (that is, the $^W variable)
produces warnings if the STRING contains the "," or the "#" charac‐
ter.
tr/SEARCHLIST/REPLACEMENTLIST/cds
y/SEARCHLIST/REPLACEMENTLIST/cds
Transliterates all occurrences of the characters found in the
search list with the corresponding character in the replacement
list. It returns the number of characters replaced or deleted. If
no string is specified via the =~ or !~ operator, the $_ string is
transliterated. (The string specified with =~ must be a scalar
variable, an array element, a hash element, or an assignment to one
of those, i.e., an lvalue.)
A character range may be specified with a hyphen, so "tr/A-J/0-9/"
does the same replacement as "tr/ACEGIBDFHJ/0246813579/". For sed
devotees, "y" is provided as a synonym for "tr". If the SEARCHLIST
is delimited by bracketing quotes, the REPLACEMENTLIST has its own
pair of quotes, which may or may not be bracketing quotes, e.g.,
"tr[A-Z][a-z]" or "tr(+\-*/)/ABCD/".
Note that "tr" does not do regular expression character classes
such as "\d" or "[:lower:]". The "tr" operator is not equivalent
to the tr(1) utility. If you want to map strings between
lower/upper cases, see "lc" in perlfunc and "uc" in perlfunc, and
in general consider using the "s" operator if you need regular
expressions.
Note also that the whole range idea is rather unportable between
character sets--and even within character sets they may cause
results you probably didn't expect. A sound principle is to use
only ranges that begin from and end at either alphabets of equal
case (a-e, A-E), or digits (0-4). Anything else is unsafe. If in
doubt, spell out the character sets in full.
Options:
c Complement the SEARCHLIST.
d Delete found but unreplaced characters.
s Squash duplicate replaced characters.
If the "/c" modifier is specified, the SEARCHLIST character set is
complemented. If the "/d" modifier is specified, any characters
specified by SEARCHLIST not found in REPLACEMENTLIST are deleted.
(Note that this is slightly more flexible than the behavior of some
tr programs, which delete anything they find in the SEARCHLIST,
period.) If the "/s" modifier is specified, sequences of characters
that were transliterated to the same character are squashed down to
a single instance of the character.
If the "/d" modifier is used, the REPLACEMENTLIST is always inter‐
preted exactly as specified. Otherwise, if the REPLACEMENTLIST is
shorter than the SEARCHLIST, the final character is replicated till
it is long enough. If the REPLACEMENTLIST is empty, the SEARCHLIST
is replicated. This latter is useful for counting characters in a
class or for squashing character sequences in a class.
Examples:
$ARGV[1] =~ tr/A-Z/a-z/; # canonicalize to lower case
$cnt = tr/*/*/; # count the stars in $_
$cnt = $sky =~ tr/*/*/; # count the stars in $sky
$cnt = tr/0-9//; # count the digits in $_
tr/a-zA-Z//s; # bookkeeper -> bokeper
($HOST = $host) =~ tr/a-z/A-Z/;
tr/a-zA-Z/ /cs; # change non-alphas to single space
tr [\200-\377]
[\000-\177]; # delete 8th bit
If multiple transliterations are given for a character, only the
first one is used:
tr/AAA/XYZ/
will transliterate any A to X.
Because the transliteration table is built at compile time, neither
the SEARCHLIST nor the REPLACEMENTLIST are subjected to double
quote interpolation. That means that if you want to use variables,
you must use an eval():
eval "tr/$oldlist/$newlist/";
die $@ if $@;
eval "tr/$oldlist/$newlist/, 1" or die $@;
<<EOF
A line-oriented form of quoting is based on the shell "here-docu‐
ment" syntax. Following a "<<" you specify a string to terminate
the quoted material, and all lines following the current line down
to the terminating string are the value of the item.
The terminating string may be either an identifier (a word), or
some quoted text. An unquoted identifier works like double quotes.
There may not be a space between the "<<" and the identifier,
unless the identifier is explicitly quoted. (If you put a space it
will be treated as a null identifier, which is valid, and matches
the first empty line.) The terminating string must appear by
itself (unquoted and with no surrounding whitespace) on the termi‐
nating line.
If the terminating string is quoted, the type of quotes used deter‐
mine the treatment of the text.
Double Quotes
Double quotes indicate that the text will be interpolated using
exactly the same rules as normal double quoted strings.
print <<EOF;
The price is $Price.
EOF
print << "EOF"; # same as above
The price is $Price.
EOF
Single Quotes
Single quotes indicate the text is to be treated literally with
no interpolation of its content. This is similar to single
quoted strings except that backslashes have no special meaning,
with "\\" being treated as two backslashes and not one as they
would in every other quoting construct.
This is the only form of quoting in perl where there is no need
to worry about escaping content, something that code generators
can and do make good use of.
Backticks
The content of the here doc is treated just as it would be if
the string were embedded in backticks. Thus the content is
interpolated as though it were double quoted and then executed
via the shell, with the results of the execution returned.
print << `EOC`; # execute command and get results
echo hi there
EOC
It is possible to stack multiple here-docs in a row:
print <<"foo", <<"bar"; # you can stack them
I said foo.
foo
I said bar.
bar
myfunc(<< "THIS", 23, <<'THAT');
Here's a line
or two.
THIS
and here's another.
THAT
Just don't forget that you have to put a semicolon on the end to
finish the statement, as Perl doesn't know you're not going to try
to do this:
print <<ABC
179231
ABC
+ 20;
If you want to remove the line terminator from your here-docs, use
"chomp()".
chomp($string = <<'END');
This is a string.
END
If you want your here-docs to be indented with the rest of the
code, you'll need to remove leading whitespace from each line manu‐
ally:
($quote = <<'FINIS') =~ s/^\s+//gm;
The Road goes ever on and on,
down from the door where it began.
FINIS
If you use a here-doc within a delimited construct, such as in
"s///eg", the quoted material must come on the lines following the
final delimiter. So instead of
s/this/<<E . 'that'
the other
E
. 'more '/eg;
you have to write
s/this/<<E . 'that'
. 'more '/eg;
the other
E
If the terminating identifier is on the last line of the program,
you must be sure there is a newline after it; otherwise, Perl will
give the warning Can't find string terminator "END" anywhere before
EOF....
Additionally, the quoting rules for the end of string identifier
are not related to Perl's quoting rules -- "q()", "qq()", and the
like are not supported in place of '' and "", and the only interpo‐
lation is for backslashing the quoting character:
print << "abc\"def";
testing...
abc"def
Finally, quoted strings cannot span multiple lines. The general
rule is that the identifier must be a string literal. Stick with
that, and you should be safe.
Gory details of parsing quoted constructs
When presented with something that might have several different inter‐
pretations, Perl uses the DWIM (that's "Do What I Mean") principle to
pick the most probable interpretation. This strategy is so successful
that Perl programmers often do not suspect the ambivalence of what they
write. But from time to time, Perl's notions differ substantially from
what the author honestly meant.
This section hopes to clarify how Perl handles quoted constructs.
Although the most common reason to learn this is to unravel
labyrinthine regular expressions, because the initial steps of parsing
are the same for all quoting operators, they are all discussed
together.
The most important Perl parsing rule is the first one discussed below:
when processing a quoted construct, Perl first finds the end of that
construct, then interprets its contents. If you understand this rule,
you may skip the rest of this section on the first reading. The other
rules are likely to contradict the user's expectations much less fre‐
quently than this first one.
Some passes discussed below are performed concurrently, but because
their results are the same, we consider them individually. For differ‐
ent quoting constructs, Perl performs different numbers of passes, from
one to four, but these passes are always performed in the same order.
Finding the end
The first pass is finding the end of the quoted construct, where
the information about the delimiters is used in parsing. During
this search, text between the starting and ending delimiters is
copied to a safe location. The text copied gets delimiter-indepen‐
dent.
If the construct is a here-doc, the ending delimiter is a line that
has a terminating string as the content. Therefore "<<EOF" is ter‐
minated by "EOF" immediately followed by "\n" and starting from the
first column of the terminating line. When searching for the ter‐
minating line of a here-doc, nothing is skipped. In other words,
lines after the here-doc syntax are compared with the terminating
string line by line.
For the constructs except here-docs, single characters are used as
starting and ending delimiters. If the starting delimiter is an
opening punctuation (that is "(", "[", "{", or "<"), the ending
delimiter is the corresponding closing punctuation (that is ")",
"]", "}", or ">"). If the starting delimiter is an unpaired char‐
acter like "/" or a closing punctuation, the ending delimiter is
same as the starting delimiter. Therefore a "/" terminates a
"qq//" construct, while a "]" terminates "qq[]" and "qq]]" con‐
structs.
When searching for single-character delimiters, escaped delimiters
and "\\" are skipped. For example, while searching for terminating
"/", combinations of "\\" and "\/" are skipped. If the delimiters
are bracketing, nested pairs are also skipped. For example, while
searching for closing "]" paired with the opening "[", combinations
of "\\", "\]", and "\[" are all skipped, and nested "[" and "]" are
skipped as well. However, when backslashes are used as the delim‐
iters (like "qq\\" and "tr\\\"), nothing is skipped. During the
search for the end, backslashes that escape delimiters are removed
(exactly speaking, they are not copied to the safe location).
For constructs with three-part delimiters ("s///", "y///", and
"tr///"), the search is repeated once more. If the first delimiter
is not an opening punctuation, three delimiters must be same such
as "s!!!" and "tr)))", in which case the second delimiter termi‐
nates the left part and starts the right part at once. If the left
part is delimited by bracketing punctuations (that is "()", "[]",
"{}", or "<>"), the right part needs another pair of delimiters
such as "s(){}" and "tr[]//". In these cases, whitespaces and com‐
ments are allowed between both parts, though the comment must fol‐
low at least one whitespace; otherwise a character expected as the
start of the comment may be regarded as the starting delimiter of
the right part.
During this search no attention is paid to the semantics of the
construct. Thus:
"$hash{"$foo/$bar"}"
or:
m/
bar # NOT a comment, this slash / terminated m//!
/x
do not form legal quoted expressions. The quoted part ends on the
first """ and "/", and the rest happens to be a syntax error.
Because the slash that terminated "m//" was followed by a "SPACE",
the example above is not "m//x", but rather "m//" with no "/x" mod‐
ifier. So the embedded "#" is interpreted as a literal "#".
Also no attention is paid to "\c\" (multichar control char syntax)
during this search. Thus the second "\" in "qq/\c\/" is interpreted
as a part of "\/", and the following "/" is not recognized as a
delimiter. Instead, use "\034" or "\x1c" at the end of quoted con‐
structs.
Interpolation
The next step is interpolation in the text obtained, which is now
delimiter-independent. There are multiple cases.
"<<'EOF'"
No interpolation is performed. Note that the combination "\\"
is left intact, since escaped delimiters are not available for
here-docs.
"m''", the pattern of "s'''"
No interpolation is performed at this stage. Any backslashed
sequences including "\\" are treated at the stage to "parsing
regular expressions".
'', "q//", "tr'''", "y'''", the replacement of "s'''"
The only interpolation is removal of "\" from pairs of "\\".
Therefore "-" in "tr'''" and "y'''" is treated literally as a
hyphen and no character range is available. "\1" in the
replacement of "s'''" does not work as $1.
"tr///", "y///"
No variable interpolation occurs. String modifying combina‐
tions for case and quoting such as "\Q", "\U", and "\E" are not
recognized. The other escape sequences such as "\200" and "\t"
and backslashed characters such as "\\" and "\-" are converted
to appropriate literals. The character "-" is treated spe‐
cially and therefore "\-" is treated as a literal "-".
"", ``, "qq//", "qx//", "<file*glob>", "<<"EOF""
"\Q", "\U", "\u", "\L", "\l" (possibly paired with "\E") are
converted to corresponding Perl constructs. Thus,
"$foo\Qbaz$bar" is converted to "$foo . (quotemeta("baz" .
$bar))" internally. The other escape sequences such as "\200"
and "\t" and backslashed characters such as "\\" and "\-" are
replaced with appropriate expansions.
Let it be stressed that whatever falls between "\Q" and "\E" is
interpolated in the usual way. Something like "\Q\\E" has no
"\E" inside. instead, it has "\Q", "\\", and "E", so the
result is the same as for "\\\\E". As a general rule, back‐
slashes between "\Q" and "\E" may lead to counterintuitive
results. So, "\Q\t\E" is converted to "quotemeta("\t")", which
is the same as "\\\t" (since TAB is not alphanumeric). Note
also that:
$str = '\t';
return "\Q$str";
may be closer to the conjectural intention of the writer of
"\Q\t\E".
Interpolated scalars and arrays are converted internally to the
"join" and "." catenation operations. Thus, "$foo XXX '@arr'"
becomes:
$foo . " XXX '" . (join $", @arr) . "'";
All operations above are performed simultaneously, left to
right.
Because the result of "\Q STRING \E" has all metacharacters
quoted, there is no way to insert a literal "$" or "@" inside a
"\Q\E" pair. If protected by "\", "$" will be quoted to became
"\\\$"; if not, it is interpreted as the start of an interpo‐
lated scalar.
Note also that the interpolation code needs to make a decision
on where the interpolated scalar ends. For instance, whether
"a $b -> {c}" really means:
"a " . $b . " -> {c}";
or:
"a " . $b -> {c};
Most of the time, the longest possible text that does not
include spaces between components and which contains matching
braces or brackets. because the outcome may be determined by
voting based on heuristic estimators, the result is not
strictly predictable. Fortunately, it's usually correct for
ambiguous cases.
the replacement of "s///"
Processing of "\Q", "\U", "\u", "\L", "\l", and interpolation
happens as with "qq//" constructs.
It is at this step that "\1" is begrudgingly converted to $1 in
the replacement text of "s///", in order to correct the incor‐
rigible sed hackers who haven't picked up the saner idiom yet.
A warning is emitted if the "use warnings" pragma or the -w
command-line flag (that is, the $^W variable) was set.
"RE" in "?RE?", "/RE/", "m/RE/", "s/RE/foo/",
Processing of "\Q", "\U", "\u", "\L", "\l", and interpolation
happens (almost) as with "qq//" constructs.
However combinations of "\" followed by RE-special chars are
not substituted but only skipped. The full list of RE-special
chars is "\", ".", "^", "$", "@", "A", "G", "Z", "d", "D", "w",
"W", "s", "S", "b", "B", "p", "P", "X", "C", "+", "*", "?",
"⎪", "(", ")", "-", "N", "n", "r", "t", "f", "e", "a", "x",
"c", "z", digits (0 to 9), "[", "{", "]", "}", whitespaces
(SPACE, TAB, LF, CR, FF, and VT in addition), and "#". As "\c"
is skipped at this step, "@" of "\c@" in RE is possibly treated
as an array symbol (for example one of @foo or "@-"), even
though the same text in "qq//" gives interpolation of "\c@".
Moreover, inside "(?{BLOCK})", "(?# comment )", and a "#"-com‐
ment in a "//x"-regular expression, no processing is performed
whatsoever. This is the first step at which the presence of
the "//x" modifier is relevant.
Interpolation in patterns has several quirks: $⎪, $(, $), "@+"
and "@-" are not interpolated, and constructs $var[SOMETHING]
are voted (by several different estimators) to be either an
array element or $var followed by an RE alternative. This is
where the notation "${arr[$bar]}" comes handy: "/${arr[0-9]}/"
is interpreted as array element "-9", not as a regular expres‐
sion from the variable $arr followed by a digit, which would be
the interpretation of "/$arr[0-9]/". Since voting among dif‐
ferent estimators may occur, the result is not predictable.
The lack of processing of "\\" creates specific restrictions on
the post-processed text. If the delimiter is "/", one cannot
get the combination "\/" into the result of this step. "/"
will finish the regular expression, "\/" will be stripped to
"/" on the previous step, and "\\/" will be left as is.
Because "/" is equivalent to "\/" inside a regular expression,
this does not matter unless the delimiter happens to be charac‐
ter special to the RE engine, such as in "s*foo*bar*",
"m[foo]", or "?foo?"; or an alphanumeric char, as in:
m m ^ a \s* b mmx;
In the RE above, which is intentionally obfuscated for illus‐
tration, the delimiter is "m", the modifier is "mx", and after
delimiter-removal the RE is the same as for "m/ ^ a \s* b /mx".
There's more than one reason you're encouraged to restrict your
delimiters to non-alphanumeric, non-whitespace choices.
This step is the last one for all constructs except regular expres‐
sions, which are processed further.
parsing regular expressions
Previous steps were performed during the compilation of Perl code,
but this one happens at run time--although it may be optimized to
be calculated at compile time if appropriate. After preprocessing
described above, and possibly after evaluation if concatenation,
joining, casing translation, or metaquoting are involved, the
resulting string is passed to the RE engine for compilation.
Whatever happens in the RE engine might be better discussed in
perlre, but for the sake of continuity, we shall do so here.
This is another step where the presence of the "//x" modifier is
relevant. The RE engine scans the string from left to right and
converts it to a finite automaton.
Backslashed characters are either replaced with corresponding lit‐
eral strings (as with "\{"), or else they generate special nodes in
the finite automaton (as with "\b"). Characters special to the RE
engine (such as "⎪") generate corresponding nodes or groups of
nodes. "(?#...)" comments are ignored. All the rest is either
converted to literal strings to match, or else is ignored (as is
whitespace and "#"-style comments if "//x" is present).
Parsing of the bracketed character class construct, "[...]", is
rather different than the rule used for the rest of the pattern.
The terminator of this construct is found using the same rules as
for finding the terminator of a "{}"-delimited construct, the only
exception being that "]" immediately following "[" is treated as
though preceded by a backslash. Similarly, the terminator of
"(?{...})" is found using the same rules as for finding the termi‐
nator of a "{}"-delimited construct.
It is possible to inspect both the string given to RE engine and
the resulting finite automaton. See the arguments "debug"/"debug‐
color" in the "use re" pragma, as well as Perl's -Dr command-line
switch documented in "Command Switches" in perlrun.
Optimization of regular expressions
This step is listed for completeness only. Since it does not
change semantics, details of this step are not documented and are
subject to change without notice. This step is performed over the
finite automaton that was generated during the previous pass.
It is at this stage that "split()" silently optimizes "/^/" to mean
"/^/m".
I/O Operators
There are several I/O operators you should know about.
A string enclosed by backticks (grave accents) first undergoes double-
quote interpolation. It is then interpreted as an external command,
and the output of that command is the value of the backtick string,
like in a shell. In scalar context, a single string consisting of all
output is returned. In list context, a list of values is returned, one
per line of output. (You can set $/ to use a different line termina‐
tor.) The command is executed each time the pseudo-literal is evalu‐
ated. The status value of the command is returned in $? (see perlvar
for the interpretation of $?). Unlike in csh, no translation is done
on the return data--newlines remain newlines. Unlike in any of the
shells, single quotes do not hide variable names in the command from
interpretation. To pass a literal dollar-sign through to the shell you
need to hide it with a backslash. The generalized form of backticks is
"qx//". (Because backticks always undergo shell expansion as well, see
perlsec for security concerns.)
In scalar context, evaluating a filehandle in angle brackets yields the
next line from that file (the newline, if any, included), or "undef" at
end-of-file or on error. When $/ is set to "undef" (sometimes known as
file-slurp mode) and the file is empty, it returns '' the first time,
followed by "undef" subsequently.
Ordinarily you must assign the returned value to a variable, but there
is one situation where an automatic assignment happens. If and only if
the input symbol is the only thing inside the conditional of a "while"
statement (even if disguised as a "for(;;)" loop), the value is auto‐
matically assigned to the global variable $_, destroying whatever was
there previously. (This may seem like an odd thing to you, but you'll
use the construct in almost every Perl script you write.) The $_ vari‐
able is not implicitly localized. You'll have to put a "local $_;"
before the loop if you want that to happen.
The following lines are equivalent:
while (defined($_ = <STDIN>)) { print; }
while ($_ = <STDIN>) { print; }
while (<STDIN>) { print; }
for (;<STDIN>;) { print; }
print while defined($_ = <STDIN>);
print while ($_ = <STDIN>);
print while <STDIN>;
This also behaves similarly, but avoids $_ :
while (my $line = <STDIN>) { print $line }
In these loop constructs, the assigned value (whether assignment is
automatic or explicit) is then tested to see whether it is defined.
The defined test avoids problems where line has a string value that
would be treated as false by Perl, for example a "" or a "0" with no
trailing newline. If you really mean for such values to terminate the
loop, they should be tested for explicitly:
while (($_ = <STDIN>) ne '0') { ... }
while (<STDIN>) { last unless $_; ... }
In other boolean contexts, "<filehandle>" without an explicit "defined"
test or comparison elicit a warning if the "use warnings" pragma or the
-w command-line switch (the $^W variable) is in effect.
The filehandles STDIN, STDOUT, and STDERR are predefined. (The file‐
handles "stdin", "stdout", and "stderr" will also work except in pack‐
ages, where they would be interpreted as local identifiers rather than
global.) Additional filehandles may be created with the open() func‐
tion, amongst others. See perlopentut and "open" in perlfunc for
details on this.
If a <FILEHANDLE> is used in a context that is looking for a list, a
list comprising all input lines is returned, one line per list element.
It's easy to grow to a rather large data space this way, so use with
care.
<FILEHANDLE> may also be spelled "readline(*FILEHANDLE)". See "read‐
line" in perlfunc.
The null filehandle <> is special: it can be used to emulate the behav‐
ior of sed and awk. Input from <> comes either from standard input, or
from each file listed on the command line. Here's how it works: the
first time <> is evaluated, the @ARGV array is checked, and if it is
empty, $ARGV[0] is set to "-", which when opened gives you standard
input. The @ARGV array is then processed as a list of filenames. The
loop
while (<>) {
... # code for each line
}
is equivalent to the following Perl-like pseudo code:
unshift(@ARGV, '-') unless @ARGV;
while ($ARGV = shift) {
open(ARGV, $ARGV);
while (<ARGV>) {
... # code for each line
}
}
except that it isn't so cumbersome to say, and will actually work. It
really does shift the @ARGV array and put the current filename into the
$ARGV variable. It also uses filehandle ARGV internally--<> is just a
synonym for <ARGV>, which is magical. (The pseudo code above doesn't
work because it treats <ARGV> as non-magical.)
You can modify @ARGV before the first <> as long as the array ends up
containing the list of filenames you really want. Line numbers ($.)
continue as though the input were one big happy file. See the example
in "eof" in perlfunc for how to reset line numbers on each file.
If you want to set @ARGV to your own list of files, go right ahead.
This sets @ARGV to all plain text files if no @ARGV was given:
@ARGV = grep { -f && -T } glob('*') unless @ARGV;
You can even set them to pipe commands. For example, this automati‐
cally filters compressed arguments through gzip:
@ARGV = map { /\.(gz⎪Z)$/ ? "gzip -dc < $_ ⎪" : $_ } @ARGV;
If you want to pass switches into your script, you can use one of the
Getopts modules or put a loop on the front like this:
while ($_ = $ARGV[0], /^-/) {
shift;
last if /^--$/;
if (/^-D(.*)/) { $debug = $1 }
if (/^-v/) { $verbose++ }
# ... # other switches
}
while (<>) {
# ... # code for each line
}
The <> symbol will return "undef" for end-of-file only once. If you
call it again after this, it will assume you are processing another
@ARGV list, and if you haven't set @ARGV, will read input from STDIN.
If what the angle brackets contain is a simple scalar variable (e.g.,
<$foo>), then that variable contains the name of the filehandle to
input from, or its typeglob, or a reference to the same. For example:
$fh = \*STDIN;
$line = <$fh>;
If what's within the angle brackets is neither a filehandle nor a sim‐
ple scalar variable containing a filehandle name, typeglob, or typeglob
reference, it is interpreted as a filename pattern to be globbed, and
either a list of filenames or the next filename in the list is
returned, depending on context. This distinction is determined on syn‐
tactic grounds alone. That means "<$x>" is always a readline() from an
indirect handle, but "<$hash{key}>" is always a glob(). That's because
$x is a simple scalar variable, but $hash{key} is not--it's a hash ele‐
ment. Even "<$x >" (note the extra space) is treated as "glob("$x ")",
not "readline($x)".
One level of double-quote interpretation is done first, but you can't
say "<$foo>" because that's an indirect filehandle as explained in the
previous paragraph. (In older versions of Perl, programmers would
insert curly brackets to force interpretation as a filename glob:
"<${foo}>". These days, it's considered cleaner to call the internal
function directly as "glob($foo)", which is probably the right way to
have done it in the first place.) For example:
while (<*.c>) {
chmod 0644, $_;
}
is roughly equivalent to:
open(FOO, "echo *.c ⎪ tr -s ' \t\r\f' '\\012\\012\\012\\012'⎪");
while (<FOO>) {
chomp;
chmod 0644, $_;
}
except that the globbing is actually done internally using the standard
"File::Glob" extension. Of course, the shortest way to do the above
is:
chmod 0644, <*.c>;
A (file)glob evaluates its (embedded) argument only when it is starting
a new list. All values must be read before it will start over. In
list context, this isn't important because you automatically get them
all anyway. However, in scalar context the operator returns the next
value each time it's called, or "undef" when the list has run out. As
with filehandle reads, an automatic "defined" is generated when the
glob occurs in the test part of a "while", because legal glob returns
(e.g. a file called 0) would otherwise terminate the loop. Again,
"undef" is returned only once. So if you're expecting a single value
from a glob, it is much better to say
($file) = <blurch*>;
than
$file = <blurch*>;
because the latter will alternate between returning a filename and
returning false.
If you're trying to do variable interpolation, it's definitely better
to use the glob() function, because the older notation can cause people
to become confused with the indirect filehandle notation.
@files = glob("$dir/*.[ch]");
@files = glob($files[$i]);
Constant Folding
Like C, Perl does a certain amount of expression evaluation at compile
time whenever it determines that all arguments to an operator are
static and have no side effects. In particular, string concatenation
happens at compile time between literals that don't do variable substi‐
tution. Backslash interpolation also happens at compile time. You can
say
'Now is the time for all' . "\n" .
'good men to come to.'
and this all reduces to one string internally. Likewise, if you say
foreach $file (@filenames) {
if (-s $file > 5 + 100 * 2**16) { }
}
the compiler will precompute the number which that expression repre‐
sents so that the interpreter won't have to.
No-ops
Perl doesn't officially have a no-op operator, but the bare constants 0
and 1 are special-cased to not produce a warning in a void context, so
you can for example safely do
1 while foo();
Bitwise String Operators
Bitstrings of any size may be manipulated by the bitwise operators ("~
⎪ & ^").
If the operands to a binary bitwise op are strings of different sizes,
⎪ and ^ ops act as though the shorter operand had additional zero bits
on the right, while the & op acts as though the longer operand were
truncated to the length of the shorter. The granularity for such
extension or truncation is one or more bytes.
# ASCII-based examples
print "j p \n" ^ " a h"; # prints "JAPH\n"
print "JA" ⎪ " ph\n"; # prints "japh\n"
print "japh\nJunk" & '_____'; # prints "JAPH\n";
print 'p N$' ^ " E<H\n"; # prints "Perl\n";
If you are intending to manipulate bitstrings, be certain that you're
supplying bitstrings: If an operand is a number, that will imply a
numeric bitwise operation. You may explicitly show which type of oper‐
ation you intend by using "" or "0+", as in the examples below.
$foo = 150 ⎪ 105; # yields 255 (0x96 ⎪ 0x69 is 0xFF)
$foo = '150' ⎪ 105; # yields 255
$foo = 150 ⎪ '105'; # yields 255
$foo = '150' ⎪ '105'; # yields string '155' (under ASCII)
$baz = 0+$foo & 0+$bar; # both ops explicitly numeric
$biz = "$foo" ^ "$bar"; # both ops explicitly stringy
See "vec" in perlfunc for information on how to manipulate individual
bits in a bit vector.
Integer Arithmetic
By default, Perl assumes that it must do most of its arithmetic in
floating point. But by saying
use integer;
you may tell the compiler that it's okay to use integer operations (if
it feels like it) from here to the end of the enclosing BLOCK. An
inner BLOCK may countermand this by saying
no integer;
which lasts until the end of that BLOCK. Note that this doesn't mean
everything is only an integer, merely that Perl may use integer opera‐
tions if it is so inclined. For example, even under "use integer", if
you take the sqrt(2), you'll still get 1.4142135623731 or so.
Used on numbers, the bitwise operators ("&", "⎪", "^", "~", "<<", and
">>") always produce integral results. (But see also "Bitwise String
Operators".) However, "use integer" still has meaning for them. By
default, their results are interpreted as unsigned integers, but if
"use integer" is in effect, their results are interpreted as signed
integers. For example, "~0" usually evaluates to a large integral
value. However, "use integer; ~0" is "-1" on two's-complement
machines.
Floating-point Arithmetic
While "use integer" provides integer-only arithmetic, there is no anal‐
ogous mechanism to provide automatic rounding or truncation to a cer‐
tain number of decimal places. For rounding to a certain number of
digits, sprintf() or printf() is usually the easiest route. See perl‐
faq4.
Floating-point numbers are only approximations to what a mathematician
would call real numbers. There are infinitely more reals than floats,
so some corners must be cut. For example:
printf "%.20g\n", 123456789123456789;
# produces 123456789123456784
Testing for exact equality of floating-point equality or inequality is
not a good idea. Here's a (relatively expensive) work-around to com‐
pare whether two floating-point numbers are equal to a particular num‐
ber of decimal places. See Knuth, volume II, for a more robust treat‐
ment of this topic.
sub fp_equal {
my ($X, $Y, $POINTS) = @_;
my ($tX, $tY);
$tX = sprintf("%.${POINTS}g", $X);
$tY = sprintf("%.${POINTS}g", $Y);
return $tX eq $tY;
}
The POSIX module (part of the standard perl distribution) implements
ceil(), floor(), and other mathematical and trigonometric functions.
The Math::Complex module (part of the standard perl distribution)
defines mathematical functions that work on both the reals and the
imaginary numbers. Math::Complex not as efficient as POSIX, but POSIX
can't work with complex numbers.
Rounding in financial applications can have serious implications, and
the rounding method used should be specified precisely. In these
cases, it probably pays not to trust whichever system rounding is being
used by Perl, but to instead implement the rounding function you need
yourself.
Bigger Numbers
The standard Math::BigInt and Math::BigFloat modules provide variable-
precision arithmetic and overloaded operators, although they're cur‐
rently pretty slow. At the cost of some space and considerable speed,
they avoid the normal pitfalls associated with limited-precision repre‐
sentations.
use Math::BigInt;
$x = Math::BigInt->new('123456789123456789');
print $x * $x;
# prints +15241578780673678515622620750190521
There are several modules that let you calculate with (bound only by
memory and cpu-time) unlimited or fixed precision. There are also some
non-standard modules that provide faster implementations via external C
libraries.
Here is a short, but incomplete summary:
Math::Fraction big, unlimited fractions like 9973 / 12967
Math::String treat string sequences like numbers
Math::FixedPrecision calculate with a fixed precision
Math::Currency for currency calculations
Bit::Vector manipulate bit vectors fast (uses C)
Math::BigIntFast Bit::Vector wrapper for big numbers
Math::Pari provides access to the Pari C library
Math::BigInteger uses an external C library
Math::Cephes uses external Cephes C library (no big numbers)
Math::Cephes::Fraction fractions via the Cephes library
Math::GMP another one using an external C library
Choose wisely.
perl v5.8.8 2008-09-19 PERLOP(1)
