perlfaq5 man page on AIX

Man page or keyword search:  
man Server   4752 pages
apropos Keyword Search (all sections)
Output format
AIX logo
[printable version]

PERLFAQ5(1)	       Perl Programmers Reference Guide		   PERLFAQ5(1)

NAME
       perlfaq5 - Files and Formats ($Revision: 10126 $)

DESCRIPTION
       This section deals with I/O and the "f" issues: filehandles, flushing,
       formats, and footers.

       How do I flush/unbuffer an output filehandle?  Why must I do this?

       Perl does not support truly unbuffered output (except insofar as you
       can "syswrite(OUT, $char, 1)"), although it does support is "command
       buffering", in which a physical write is performed after every output
       command.

       The C standard I/O library (stdio) normally buffers characters sent to
       devices so that there isn't a system call for each byte. In most stdio
       implementations, the type of output buffering and the size of the buf‐
       fer varies according to the type of device. Perl's "print()" and
       "write()" functions normally buffer output, while "syswrite()" bypasses
       buffering all together.

       If you want your output to be sent immediately when you execute
       "print()" or "write()" (for instance, for some network protocols), you
       must set the handle's autoflush flag. This flag is the Perl variable $⎪
       and when it is set to a true value, Perl will flush the handle's buffer
       after each "print()" or "write()". Setting $⎪ affects buffering only
       for the currently selected default filehandle.  You choose this handle
       with the one argument "select()" call (see "$⎪" in perlvar and "select"
       in perlfunc).

       Use "select()" to choose the desired handle, then set its per-filehan‐
       dle variables.

	       $old_fh = select(OUTPUT_HANDLE);
	       $⎪ = 1;
	       select($old_fh);

       Some modules offer object-oriented access to handles and their vari‐
       ables, although they may be overkill if this is the only thing you do
       with them.  You can use "IO::Handle":

	       use IO::Handle;
	       open my( $printer ), ">", "/dev/printer");   # but is this?
	       $printer->autoflush(1);

       or "IO::Socket" (which inherits from "IO::Handle"):

	       use IO::Socket;		 # this one is kinda a pipe?
	       my $sock = IO::Socket::INET->new( 'www.example.com:80' );

	       $sock->autoflush();

       You can also flush an "IO::Handle" object without setting "autoflush".
       Call the "flush" method to flush the buffer yourself:

	       use IO::Handle;
	       open my( $printer ), ">", "/dev/printer");
	       $printer->flush; # one time flush

       How do I change, delete, or insert a line in a file, or append to the
       beginning of a file?

       (contributed by brian d foy)

       The basic idea of inserting, changing, or deleting a line from a text
       file involves reading and printing the file to the point you want to
       make the change, making the change, then reading and printing the rest
       of the file. Perl doesn't provide random access to lines (especially
       since the record input separator, $/, is mutable), although modules
       such as "Tie::File" can fake it.

       A Perl program to do these tasks takes the basic form of opening a
       file, printing its lines, then closing the file:

	       open my $in,  '<',  $file      or die "Can't read old file: $!";
	       open my $out, '>', "$file.new" or die "Can't write new file: $!";

	       while( <$in> )
		       {
		       print $out $_;
		       }

	  close $out;

       Within that basic form, add the parts that you need to insert, change,
       or delete lines.

       To prepend lines to the beginning, print those lines before you enter
       the loop that prints the existing lines.

	       open my $in,  '<',  $file      or die "Can't read old file: $!";
	       open my $out, '>', "$file.new" or die "Can't write new file: $!";

	       print "# Add this line to the top\n"; # <--- HERE'S THE MAGIC

	       while( <$in> )
		       {
		       print $out $_;
		       }

	  close $out;

       To change existing lines, insert the code to modify the lines inside
       the "while" loop. In this case, the code finds all lowercased versions
       of "perl" and uppercases them. The happens for every line, so be sure
       that you're supposed to do that on every line!

	       open my $in,  '<',  $file      or die "Can't read old file: $!";
	       open my $out, '>', "$file.new" or die "Can't write new file: $!";

	       print "# Add this line to the top\n";

	       while( <$in> )
		       {
		       s/\b(perl)\b/Perl/g;
		       print $out $_;
		       }

	  close $out;

       To change only a particular line, the input line number, $., is useful.
       First read and print the lines up to the one you	 want to change. Next,
       read the single line you want to change, change it, and print it. After
       that, read the rest of the lines and print those:

	       while( <$in> )	# print the lines before the change
		       {
		       print $out $_;
		       last if $. == 4; # line number before change
		       }

	       my $line = <$in>;
	       $line =~ s/\b(perl)\b/Perl/g;
	       print $out $line;

	       while( <$in> )	# print the rest of the lines
		       {
		       print $out $_;
		       }

       To skip lines, use the looping controls. The "next" in this example
       skips comment lines, and the "last" stops all processing once it
       encounters either "__END__" or "__DATA__".

	       while( <$in> )
		       {
		       next if /^\s+#/;		    # skip comment lines
		       last if /^__(END⎪DATA)__$/;  # stop at end of code marker
		       print $out $_;
		       }

       Do the same sort of thing to delete a particular line by using "next"
       to skip the lines you don't want to show up in the output. This example
       skips every fifth line:

	       while( <$in> )
		       {
		       next unless $. % 5;
		       print $out $_;
		       }

       If, for some odd reason, you really want to see the whole file at once
       rather than processing line by line, you can slurp it in (as long as
       you can fit the whole thing in memory!):

	       open my $in,  '<',  $file      or die "Can't read old file: $!"
	       open my $out, '>', "$file.new" or die "Can't write new file: $!";

	       my @lines = do { local $/; <$in> }; # slurp!

		       # do your magic here

	       print $out @lines;

       Modules such as "File::Slurp" and "Tie::File" can help with that too.
       If you can, however, avoid reading the entire file at once. Perl won't
       give that memory back to the operating system until the process fin‐
       ishes.

       You can also use Perl one-liners to modify a file in-place. The follow‐
       ing changes all 'Fred' to 'Barney' in inFile.txt, overwriting the file
       with the new contents. With the "-p" switch, Perl wraps a "while" loop
       around the code you specify with "-e", and "-i" turns on in-place edit‐
       ing. The current line is in $_. With "-p", Perl automatically prints
       the value of $_ at the end of the loop. See perlrun for more details.

	       perl -pi -e 's/Fred/Barney/' inFile.txt

       To make a backup of "inFile.txt", give "-i" a file extension to add:

	       perl -pi.bak -e 's/Fred/Barney/' inFile.txt

       To change only the fifth line, you can add a test checking $., the
       input line number, then only perform the operation when the test
       passes:

	       perl -pi -e 's/Fred/Barney/ if $. == 5' inFile.txt

       To add lines before a certain line, you can add a line (or lines!)
       before Perl prints $_:

	       perl -pi -e 'print "Put before third line\n" if $. == 3' inFile.txt

       You can even add a line to the beginning of a file, since the current
       line prints at the end of the loop:

	       perl -pi -e 'print "Put before first line\n" if $. == 1' inFile.txt

       To insert a line after one already in the file, use the "-n" switch.
       It's just like "-p" except that it doesn't print $_ at the end of the
       loop, so you have to do that yourself. In this case, print $_ first,
       then print the line that you want to add.

	       perl -ni -e 'print; print "Put after fifth line\n" if $. == 5' inFile.txt

       To delete lines, only print the ones that you want.

	       perl -ni -e 'print unless /d/' inFile.txt

		       ... or ...

	       perl -pi -e 'next unless /d/' inFile.txt

       How do I count the number of lines in a file?

       One fairly efficient way is to count newlines in the file. The follow‐
       ing program uses a feature of tr///, as documented in perlop.  If your
       text file doesn't end with a newline, then it's not really a proper
       text file, so this may report one fewer line than you expect.

	       $lines = 0;
	       open(FILE, $filename) or die "Can't open `$filename': $!";
	       while (sysread FILE, $buffer, 4096) {
		       $lines += ($buffer =~ tr/\n//);
		       }
	       close FILE;

       This assumes no funny games with newline translations.

       How can I use Perl's "-i" option from within a program?

       "-i" sets the value of Perl's $^I variable, which in turn affects the
       behavior of "<>"; see perlrun for more details.	By modifying the
       appropriate variables directly, you can get the same behavior within a
       larger program.	For example:

	       # ...
	       {
	       local($^I, @ARGV) = ('.orig', glob("*.c"));
	       while (<>) {
		       if ($. == 1) {
			       print "This line should appear at the top of each file\n";
		       }
		       s/\b(p)earl\b/${1}erl/i;	       # Correct typos, preserving case
		       print;
		       close ARGV if eof;	       # Reset $.
		       }
	       }
	       # $^I and @ARGV return to their old values here

       This block modifies all the ".c" files in the current directory, leav‐
       ing a backup of the original data from each file in a new ".c.orig"
       file.

       How can I copy a file?

       (contributed by brian d foy)

       Use the File::Copy module. It comes with Perl and can do a true copy
       across file systems, and it does its magic in a portable fashion.

	       use File::Copy;

	       copy( $original, $new_copy ) or die "Copy failed: $!";

       If you can't use File::Copy, you'll have to do the work yourself: open
       the original file, open the destination file, then print to the desti‐
       nation file as you read the original.

       How do I make a temporary file name?

       If you don't need to know the name of the file, you can use "open()"
       with "undef" in place of the file name.	The "open()" function creates
       an anonymous temporary file.

	       open my $tmp, '+>', undef or die $!;

       Otherwise, you can use the File::Temp module.

	       use File::Temp qw/ tempfile tempdir /;

	       $dir = tempdir( CLEANUP => 1 );
	       ($fh, $filename) = tempfile( DIR => $dir );

	       # or if you don't need to know the filename

	       $fh = tempfile( DIR => $dir );

       The File::Temp has been a standard module since Perl 5.6.1.  If you
       don't have a modern enough Perl installed, use the "new_tmpfile" class
       method from the IO::File module to get a filehandle opened for reading
       and writing.  Use it if you don't need to know the file's name:

	       use IO::File;
	       $fh = IO::File->new_tmpfile()
	       or die "Unable to make new temporary file: $!";

       If you're committed to creating a temporary file by hand, use the
       process ID and/or the current time-value.  If you need to have many
       temporary files in one process, use a counter:

	       BEGIN {
	       use Fcntl;
	       my $temp_dir = -d '/tmp' ? '/tmp' : $ENV{TMPDIR} ⎪⎪ $ENV{TEMP};
	       my $base_name = sprintf "%s/%d-%d-0000", $temp_dir, $$, time;

	       sub temp_file {
		       local *FH;
		       my $count = 0;
		       until( defined(fileno(FH)) ⎪⎪ $count++ > 100 ) {
			       $base_name =~ s/-(\d+)$/"-" . (1 + $1)/e;
			       # O_EXCL is required for security reasons.
			       sysopen FH, $base_name, O_WRONLY⎪O_EXCL⎪O_CREAT;
			       }

		       if( defined fileno(FH) ) {
			       return (*FH, $base_name);
			       }
		       else {
			       return ();
			       }
		       }

	       }

       How can I manipulate fixed-record-length files?

       The most efficient way is using pack() and unpack().  This is faster
       than using substr() when taking many, many strings.  It is slower for
       just a few.

       Here is a sample chunk of code to break up and put back together again
       some fixed-format input lines, in this case from the output of a nor‐
       mal, Berkeley-style ps:

	       # sample input line:
	       #   15158 p5  T	    0:00 perl /home/tchrist/scripts/now-what
	       my $PS_T = 'A6 A4 A7 A5 A*';
	       open my $ps, '-⎪', 'ps';
	       print scalar <$ps>;
	       my @fields = qw( pid tt stat time command );
	       while (<$ps>) {
		       my %process;
		       @process{@fields} = unpack($PS_T, $_);
	       for my $field ( @fields ) {
		       print "$field: <$process{$field}>\n";
	       }
	       print 'line=', pack($PS_T, @process{@fields} ), "\n";
	       }

       We've used a hash slice in order to easily handle the fields of each
       row.  Storing the keys in an array means it's easy to operate on them
       as a group or loop over them with for. It also avoids polluting the
       program with global variables and using symbolic references.

       How can I make a filehandle local to a subroutine?  How do I pass file‐
       handles between subroutines?  How do I make an array of filehandles?

       As of perl5.6, open() autovivifies file and directory handles as refer‐
       ences if you pass it an uninitialized scalar variable.  You can then
       pass these references just like any other scalar, and use them in the
       place of named handles.

	       open my	  $fh, $file_name;

	       open local $fh, $file_name;

	       print $fh "Hello World!\n";

	       process_file( $fh );

       If you like, you can store these filehandles in an array or a hash.  If
       you access them directly, they aren't simple scalars and you need to
       give "print" a little help by placing the filehandle reference in
       braces. Perl can only figure it out on its own when the filehandle ref‐
       erence is a simple scalar.

	       my @fhs = ( $fh1, $fh2, $fh3 );

	       for( $i = 0; $i <= $#fhs; $i++ ) {
		       print {$fhs[$i]} "just another Perl answer, \n";
		       }

       Before perl5.6, you had to deal with various typeglob idioms which you
       may see in older code.

	       open FILE, "> $filename";
	       process_typeglob(   *FILE );
	       process_reference( \*FILE );

	       sub process_typeglob  { local *FH = shift; print FH  "Typeglob!" }
	       sub process_reference { local $fh = shift; print $fh "Reference!" }

       If you want to create many anonymous handles, you should check out the
       Symbol or IO::Handle modules.

       How can I use a filehandle indirectly?

       An indirect filehandle is using something other than a symbol in a
       place that a filehandle is expected.  Here are ways to get indirect
       filehandles:

	       $fh =   SOME_FH;	      # bareword is strict-subs hostile
	       $fh =  "SOME_FH";      # strict-refs hostile; same package only
	       $fh =  *SOME_FH;	      # typeglob
	       $fh = \*SOME_FH;	      # ref to typeglob (bless-able)
	       $fh =  *SOME_FH{IO};   # blessed IO::Handle from *SOME_FH typeglob

       Or, you can use the "new" method from one of the IO::* modules to cre‐
       ate an anonymous filehandle, store that in a scalar variable, and use
       it as though it were a normal filehandle.

	       use IO::Handle;			   # 5.004 or higher
	       $fh = IO::Handle->new();

       Then use any of those as you would a normal filehandle.	Anywhere that
       Perl is expecting a filehandle, an indirect filehandle may be used
       instead. An indirect filehandle is just a scalar variable that contains
       a filehandle.  Functions like "print", "open", "seek", or the "<FH>"
       diamond operator will accept either a named filehandle or a scalar
       variable containing one:

	       ($ifh, $ofh, $efh) = (*STDIN, *STDOUT, *STDERR);
	       print $ofh "Type it: ";
	       $got = <$ifh>
	       print $efh "What was that: $got";

       If you're passing a filehandle to a function, you can write the func‐
       tion in two ways:

	       sub accept_fh {
		       my $fh = shift;
		       print $fh "Sending to indirect filehandle\n";
	       }

       Or it can localize a typeglob and use the filehandle directly:

	       sub accept_fh {
		       local *FH = shift;
		       print  FH "Sending to localized filehandle\n";
	       }

       Both styles work with either objects or typeglobs of real filehandles.
       (They might also work with strings under some circumstances, but this
       is risky.)

	       accept_fh(*STDOUT);
	       accept_fh($handle);

       In the examples above, we assigned the filehandle to a scalar variable
       before using it.	 That is because only simple scalar variables, not
       expressions or subscripts of hashes or arrays, can be used with built-
       ins like "print", "printf", or the diamond operator.  Using something
       other than a simple scalar variable as a filehandle is illegal and
       won't even compile:

	       @fd = (*STDIN, *STDOUT, *STDERR);
	       print $fd[1] "Type it: ";			   # WRONG
	       $got = <$fd[0]>					   # WRONG
	       print $fd[2] "What was that: $got";		   # WRONG

       With "print" and "printf", you get around this by using a block and an
       expression where you would place the filehandle:

	       print  { $fd[1] } "funny stuff\n";
	       printf { $fd[1] } "Pity the poor %x.\n", 3_735_928_559;
	       # Pity the poor deadbeef.

       That block is a proper block like any other, so you can put more com‐
       plicated code there.  This sends the message out to one of two places:

	       $ok = -x "/bin/cat";
	       print { $ok ? $fd[1] : $fd[2] } "cat stat $ok\n";
	       print { $fd[ 1+ ($ok ⎪⎪ 0) ]  } "cat stat $ok\n";

       This approach of treating "print" and "printf" like object methods
       calls doesn't work for the diamond operator.  That's because it's a
       real operator, not just a function with a comma-less argument.  Assum‐
       ing you've been storing typeglobs in your structure as we did above,
       you can use the built-in function named "readline" to read a record
       just as "<>" does.  Given the initialization shown above for @fd, this
       would work, but only because readline() requires a typeglob.  It
       doesn't work with objects or strings, which might be a bug we haven't
       fixed yet.

	       $got = readline($fd[0]);

       Let it be noted that the flakiness of indirect filehandles is not
       related to whether they're strings, typeglobs, objects, or anything
       else.  It's the syntax of the fundamental operators.  Playing the
       object game doesn't help you at all here.

       How can I set up a footer format to be used with write()?

       There's no builtin way to do this, but perlform has a couple of tech‐
       niques to make it possible for the intrepid hacker.

       How can I write() into a string?

       See "Accessing Formatting Internals" in perlform for an "swrite()"
       function.

       How can I open a filehandle to a string? , , ,

       (contributed by Peter J. Holzer, hjp-usenet2@hjp.at)

       Since Perl 5.8.0, you can pass a reference to a scalar instead of the
       filename to create a file handle which you can used to read from or
       write to a string:

	       open(my $fh, '>', \$string) or die "Could not open string for writing";
	       print $fh "foo\n";
	       print $fh "bar\n";      # $string now contains "foo\nbar\n"

	       open(my $fh, '<', \$string) or die "Could not open string for reading";
	       my $x = <$fh>;  # $x now contains "foo\n"

       With older versions of Perl, the "IO::String" module provides similar
       functionality.

       How can I output my numbers with commas added?

       (contributed by brian d foy and Benjamin Goldberg)

       You can use Number::Format to separate places in a number.  It handles
       locale information for those of you who want to insert full stops
       instead (or anything else that they want to use, really).

       This subroutine will add commas to your number:

	       sub commify {
		       local $_	 = shift;
		       1 while s/^([-+]?\d+)(\d{3})/$1,$2/;
		       return $_;
		       }

       This regex from Benjamin Goldberg will add commas to numbers:

	       s/(^[-+]?\d+?(?=(?>(?:\d{3})+)(?!\d))⎪\G\d{3}(?=\d))/$1,/g;

       It is easier to see with comments:

	       s/(
		       ^[-+]?		  # beginning of number.
		       \d+?		  # first digits before first comma
		       (?=		  # followed by, (but not included in the match) :
			       (?>(?:\d{3})+) # some positive multiple of three digits.
			       (?!\d)	      # an *exact* multiple, not x * 3 + 1 or whatever.
		       )
		       ⎪		  # or:
		       \G\d{3}		  # after the last group, get three digits
		       (?=\d)		  # but they have to have more digits after them.
	       )/$1,/xg;

       How can I translate tildes (~) in a filename?

       Use the <> (glob()) operator, documented in perlfunc.  Older versions
       of Perl require that you have a shell installed that groks tildes.
       Recent perl versions have this feature built in. The File::KGlob module
       (available from CPAN) gives more portable glob functionality.

       Within Perl, you may use this directly:

	       $filename =~ s{
		 ^ ~		 # find a leading tilde
		 (		 # save this in $1
		     [^/]	 # a non-slash character
			   *	 # repeated 0 or more times (0 means me)
		 )
	       }{
		 $1
		     ? (getpwnam($1))[7]
		     : ( $ENV{HOME} ⎪⎪ $ENV{LOGDIR} )
	       }ex;

       How come when I open a file read-write it wipes it out?

       Because you're using something like this, which truncates the file and
       then gives you read-write access:

	       open(FH, "+> /path/name");	       # WRONG (almost always)

       Whoops.	You should instead use this, which will fail if the file
       doesn't exist.

	       open(FH, "+< /path/name");      # open for update

       Using ">" always clobbers or creates.  Using "<" never does either.
       The "+" doesn't change this.

       Here are examples of many kinds of file opens.  Those using sysopen()
       all assume

	       use Fcntl;

       To open file for reading:

	       open(FH, "< $path")				   ⎪⎪ die $!;
	       sysopen(FH, $path, O_RDONLY)			   ⎪⎪ die $!;

       To open file for writing, create new file if needed or else truncate
       old file:

	       open(FH, "> $path") ⎪⎪ die $!;
	       sysopen(FH, $path, O_WRONLY⎪O_TRUNC⎪O_CREAT)	   ⎪⎪ die $!;
	       sysopen(FH, $path, O_WRONLY⎪O_TRUNC⎪O_CREAT, 0666)  ⎪⎪ die $!;

       To open file for writing, create new file, file must not exist:

	       sysopen(FH, $path, O_WRONLY⎪O_EXCL⎪O_CREAT)	   ⎪⎪ die $!;
	       sysopen(FH, $path, O_WRONLY⎪O_EXCL⎪O_CREAT, 0666)   ⎪⎪ die $!;

       To open file for appending, create if necessary:

	       open(FH, ">> $path") ⎪⎪ die $!;
	       sysopen(FH, $path, O_WRONLY⎪O_APPEND⎪O_CREAT)	   ⎪⎪ die $!;
	       sysopen(FH, $path, O_WRONLY⎪O_APPEND⎪O_CREAT, 0666) ⎪⎪ die $!;

       To open file for appending, file must exist:

	       sysopen(FH, $path, O_WRONLY⎪O_APPEND)		   ⎪⎪ die $!;

       To open file for update, file must exist:

	       open(FH, "+< $path")				   ⎪⎪ die $!;
	       sysopen(FH, $path, O_RDWR)			   ⎪⎪ die $!;

       To open file for update, create file if necessary:

	       sysopen(FH, $path, O_RDWR⎪O_CREAT)		   ⎪⎪ die $!;
	       sysopen(FH, $path, O_RDWR⎪O_CREAT, 0666)		   ⎪⎪ die $!;

       To open file for update, file must not exist:

	       sysopen(FH, $path, O_RDWR⎪O_EXCL⎪O_CREAT)	   ⎪⎪ die $!;
	       sysopen(FH, $path, O_RDWR⎪O_EXCL⎪O_CREAT, 0666)	   ⎪⎪ die $!;

       To open a file without blocking, creating if necessary:

	       sysopen(FH, "/foo/somefile", O_WRONLY⎪O_NDELAY⎪O_CREAT)
		   or die "can't open /foo/somefile: $!":

       Be warned that neither creation nor deletion of files is guaranteed to
       be an atomic operation over NFS.	 That is, two processes might both
       successfully create or unlink the same file!  Therefore O_EXCL isn't as
       exclusive as you might wish.

       See also the new perlopentut if you have it (new for 5.6).

       Why do I sometimes get an "Argument list too long" when I use <*>?

       The "<>" operator performs a globbing operation (see above).  In Perl
       versions earlier than v5.6.0, the internal glob() operator forks csh(1)
       to do the actual glob expansion, but csh can't handle more than 127
       items and so gives the error message "Argument list too long".  People
       who installed tcsh as csh won't have this problem, but their users may
       be surprised by it.

       To get around this, either upgrade to Perl v5.6.0 or later, do the glob
       yourself with readdir() and patterns, or use a module like File::KGlob,
       one that doesn't use the shell to do globbing.

       Is there a leak/bug in glob()?

       Due to the current implementation on some operating systems, when you
       use the glob() function or its angle-bracket alias in a scalar context,
       you may cause a memory leak and/or unpredictable behavior.  It's best
       therefore to use glob() only in list context.

       How can I open a file with a leading ">" or trailing blanks?

       (contributed by Brian McCauley)

       The special two argument form of Perl's open() function ignores trail‐
       ing blanks in filenames and infers the mode from certain leading char‐
       acters (or a trailing "⎪"). In older versions of Perl this was the only
       version of open() and so it is prevalent in old code and books.

       Unless you have a particular reason to use the two argument form you
       should use the three argument form of open() which does not treat any
       characters in the filename as special.

	       open FILE, "<", "  file	";  # filename is "   file   "
	       open FILE, ">", ">file";	    # filename is ">file"

       How can I reliably rename a file?

       If your operating system supports a proper mv(1) utility or its func‐
       tional equivalent, this works:

	       rename($old, $new) or system("mv", $old, $new);

       It may be more portable to use the File::Copy module instead.  You just
       copy to the new file to the new name (checking return values), then
       delete the old one.  This isn't really the same semantically as a
       rename(), which preserves meta-information like permissions, time‐
       stamps, inode info, etc.

       Newer versions of File::Copy export a move() function.

       How can I lock a file?

       Perl's builtin flock() function (see perlfunc for details) will call
       flock(2) if that exists, fcntl(2) if it doesn't (on perl version 5.004
       and later), and lockf(3) if neither of the two previous system calls
       exists.	On some systems, it may even use a different form of native
       locking.	 Here are some gotchas with Perl's flock():

       1   Produces a fatal error if none of the three system calls (or their
	   close equivalent) exists.

       2   lockf(3) does not provide shared locking, and requires that the
	   filehandle be open for writing (or appending, or read/writing).

       3   Some versions of flock() can't lock files over a network (e.g. on
	   NFS file systems), so you'd need to force the use of fcntl(2) when
	   you build Perl.  But even this is dubious at best.  See the flock
	   entry of perlfunc and the INSTALL file in the source distribution
	   for information on building Perl to do this.

	   Two potentially non-obvious but traditional flock semantics are
	   that it waits indefinitely until the lock is granted, and that its
	   locks are merely advisory.  Such discretionary locks are more flex‐
	   ible, but offer fewer guarantees.  This means that files locked
	   with flock() may be modified by programs that do not also use
	   flock().  Cars that stop for red lights get on well with each
	   other, but not with cars that don't stop for red lights.  See the
	   perlport manpage, your port's specific documentation, or your sys‐
	   tem-specific local manpages for details.  It's best to assume tra‐
	   ditional behavior if you're writing portable programs.  (If you're
	   not, you should as always feel perfectly free to write for your own
	   system's idiosyncrasies (sometimes called "features").  Slavish
	   adherence to portability concerns shouldn't get in the way of your
	   getting your job done.)

	   For more information on file locking, see also "File Locking" in
	   perlopentut if you have it (new for 5.6).

       Why can't I just open(FH, ">file.lock")?

       A common bit of code NOT TO USE is this:

	       sleep(3) while -e "file.lock";  # PLEASE DO NOT USE
	       open(LCK, "> file.lock");	       # THIS BROKEN CODE

       This is a classic race condition: you take two steps to do something
       which must be done in one.  That's why computer hardware provides an
       atomic test-and-set instruction.	  In theory, this "ought" to work:

	       sysopen(FH, "file.lock", O_WRONLY⎪O_EXCL⎪O_CREAT)
		       or die "can't open  file.lock: $!";

       except that lamentably, file creation (and deletion) is not atomic over
       NFS, so this won't work (at least, not every time) over the net.	 Vari‐
       ous schemes involving link() have been suggested, but these tend to
       involve busy-wait, which is also less than desirable.

       I still don't get locking.  I just want to increment the number in the
       file.  How can I do this?

       Didn't anyone ever tell you web-page hit counters were useless?	They
       don't count number of hits, they're a waste of time, and they serve
       only to stroke the writer's vanity.  It's better to pick a random num‐
       ber; they're more realistic.

       Anyway, this is what you can do if you can't help yourself.

	       use Fcntl qw(:DEFAULT :flock);
	       sysopen(FH, "numfile", O_RDWR⎪O_CREAT)	or die "can't open numfile: $!";
	       flock(FH, LOCK_EX)				or die "can't flock numfile: $!";
	       $num = <FH> ⎪⎪ 0;
	       seek(FH, 0, 0)				or die "can't rewind numfile: $!";
	       truncate(FH, 0)					or die "can't truncate numfile: $!";
	       (print FH $num+1, "\n")			or die "can't write numfile: $!";
	       close FH						or die "can't close numfile: $!";

       Here's a much better web-page hit counter:

	       $hits = int( (time() - 850_000_000) / rand(1_000) );

       If the count doesn't impress your friends, then the code might.	:-)

       All I want to do is append a small amount of text to the end of a file.
       Do I still have to use locking?

       If you are on a system that correctly implements flock() and you use
       the example appending code from "perldoc -f flock" everything will be
       OK even if the OS you are on doesn't implement append mode correctly
       (if such a system exists.) So if you are happy to restrict yourself to
       OSs that implement flock() (and that's not really much of a restric‐
       tion) then that is what you should do.

       If you know you are only going to use a system that does correctly
       implement appending (i.e. not Win32) then you can omit the seek() from
       the code in the previous answer.

       If you know you are only writing code to run on an OS and filesystem
       that does implement append mode correctly (a local filesystem on a mod‐
       ern Unix for example), and you keep the file in block-buffered mode and
       you write less than one buffer-full of output between each manual
       flushing of the buffer then each bufferload is almost guaranteed to be
       written to the end of the file in one chunk without getting intermin‐
       gled with anyone else's output. You can also use the syswrite() func‐
       tion which is simply a wrapper around your systems write(2) system
       call.

       There is still a small theoretical chance that a signal will interrupt
       the system level write() operation before completion.  There is also a
       possibility that some STDIO implementations may call multiple system
       level write()s even if the buffer was empty to start.  There may be
       some systems where this probability is reduced to zero.

       How do I randomly update a binary file?

       If you're just trying to patch a binary, in many cases something as
       simple as this works:

	       perl -i -pe 's{window manager}{window mangler}g' /usr/bin/emacs

       However, if you have fixed sized records, then you might do something
       more like this:

	       $RECSIZE = 220; # size of record, in bytes
	       $recno	= 37;  # which record to update
	       open(FH, "+<somewhere") ⎪⎪ die "can't update somewhere: $!";
	       seek(FH, $recno * $RECSIZE, 0);
	       read(FH, $record, $RECSIZE) == $RECSIZE ⎪⎪ die "can't read record $recno: $!";
	       # munge the record
	       seek(FH, -$RECSIZE, 1);
	       print FH $record;
	       close FH;

       Locking and error checking are left as an exercise for the reader.
       Don't forget them or you'll be quite sorry.

       How do I get a file's timestamp in perl?

       If you want to retrieve the time at which the file was last read, writ‐
       ten, or had its meta-data (owner, etc) changed, you use the -A, -M, or
       -C file test operations as documented in perlfunc.  These retrieve the
       age of the file (measured against the start-time of your program) in
       days as a floating point number. Some platforms may not have all of
       these times.  See perlport for details. To retrieve the "raw" time in
       seconds since the epoch, you would call the stat function, then use
       localtime(), gmtime(), or POSIX::strftime() to convert this into human-
       readable form.

       Here's an example:

	       $write_secs = (stat($file))[9];
	       printf "file %s updated at %s\n", $file,
	       scalar localtime($write_secs);

       If you prefer something more legible, use the File::stat module (part
       of the standard distribution in version 5.004 and later):

	       # error checking left as an exercise for reader.
	       use File::stat;
	       use Time::localtime;
	       $date_string = ctime(stat($file)->mtime);
	       print "file $file updated at $date_string\n";

       The POSIX::strftime() approach has the benefit of being, in theory,
       independent of the current locale.  See perllocale for details.

       How do I set a file's timestamp in perl?

       You use the utime() function documented in "utime" in perlfunc.	By way
       of example, here's a little program that copies the read and write
       times from its first argument to all the rest of them.

	       if (@ARGV < 2) {
		       die "usage: cptimes timestamp_file other_files ...\n";
		       }
	       $timestamp = shift;
	       ($atime, $mtime) = (stat($timestamp))[8,9];
	       utime $atime, $mtime, @ARGV;

       Error checking is, as usual, left as an exercise for the reader.

       The perldoc for utime also has an example that has the same effect as
       touch(1) on files that already exist.

       Certain file systems have a limited ability to store the times on a
       file at the expected level of precision.	 For example, the FAT and HPFS
       filesystem are unable to create dates on files with a finer granularity
       than two seconds.  This is a limitation of the filesystems, not of
       utime().

       How do I print to more than one file at once?

       To connect one filehandle to several output filehandles, you can use
       the IO::Tee or Tie::FileHandle::Multiplex modules.

       If you only have to do this once, you can print individually to each
       filehandle.

	       for $fh (FH1, FH2, FH3) { print $fh "whatever\n" }

       How can I read in an entire file all at once?

       You can use the File::Slurp module to do it in one step.

	       use File::Slurp;

	       $all_of_it = read_file($filename); # entire file in scalar
	       @all_lines = read_file($filename); # one line perl element

       The customary Perl approach for processing all the lines in a file is
       to do so one line at a time:

	       open (INPUT, $file)     ⎪⎪ die "can't open $file: $!";
	       while (<INPUT>) {
		       chomp;
		       # do something with $_
		       }
	       close(INPUT)	       ⎪⎪ die "can't close $file: $!";

       This is tremendously more efficient than reading the entire file into
       memory as an array of lines and then processing it one element at a
       time, which is often--if not almost always--the wrong approach.	When‐
       ever you see someone do this:

	       @lines = <INPUT>;

       you should think long and hard about why you need everything loaded at
       once.  It's just not a scalable solution.  You might also find it more
       fun to use the standard Tie::File module, or the DB_File module's
       $DB_RECNO bindings, which allow you to tie an array to a file so that
       accessing an element the array actually accesses the corresponding line
       in the file.

       You can read the entire filehandle contents into a scalar.

	       {
	       local(*INPUT, $/);
	       open (INPUT, $file)     ⎪⎪ die "can't open $file: $!";
	       $var = <INPUT>;
	       }

       That temporarily undefs your record separator, and will automatically
       close the file at block exit.  If the file is already open, just use
       this:

	       $var = do { local $/; <INPUT> };

       For ordinary files you can also use the read function.

	       read( INPUT, $var, -s INPUT );

       The third argument tests the byte size of the data on the INPUT file‐
       handle and reads that many bytes into the buffer $var.

       How can I read in a file by paragraphs?

       Use the $/ variable (see perlvar for details).  You can either set it
       to "" to eliminate empty paragraphs ("abc\n\n\n\ndef", for instance,
       gets treated as two paragraphs and not three), or "\n\n" to accept
       empty paragraphs.

       Note that a blank line must have no blanks in it.  Thus
       "fred\n \nstuff\n\n" is one paragraph, but "fred\n\nstuff\n\n" is two.

       How can I read a single character from a file?  From the keyboard?

       You can use the builtin "getc()" function for most filehandles, but it
       won't (easily) work on a terminal device.  For STDIN, either use the
       Term::ReadKey module from CPAN or use the sample code in "getc" in
       perlfunc.

       If your system supports the portable operating system programming
       interface (POSIX), you can use the following code, which you'll note
       turns off echo processing as well.

	       #!/usr/bin/perl -w
	       use strict;
	       $⎪ = 1;
	       for (1..4) {
		       my $got;
		       print "gimme: ";
		       $got = getone();
		       print "--> $got\n";
		       }
	   exit;

	       BEGIN {
	       use POSIX qw(:termios_h);

	       my ($term, $oterm, $echo, $noecho, $fd_stdin);

	       $fd_stdin = fileno(STDIN);

	       $term	 = POSIX::Termios->new();
	       $term->getattr($fd_stdin);
	       $oterm	  = $term->getlflag();

	       $echo	 = ECHO ⎪ ECHOK ⎪ ICANON;
	       $noecho	 = $oterm & ~$echo;

	       sub cbreak {
		       $term->setlflag($noecho);
		       $term->setcc(VTIME, 1);
		       $term->setattr($fd_stdin, TCSANOW);
		       }

	       sub cooked {
		       $term->setlflag($oterm);
		       $term->setcc(VTIME, 0);
		       $term->setattr($fd_stdin, TCSANOW);
		       }

	       sub getone {
		       my $key = '';
		       cbreak();
		       sysread(STDIN, $key, 1);
		       cooked();
		       return $key;
		       }

	       }

	       END { cooked() }

       The Term::ReadKey module from CPAN may be easier to use.	 Recent ver‐
       sions include also support for non-portable systems as well.

	       use Term::ReadKey;
	       open(TTY, "</dev/tty");
	       print "Gimme a char: ";
	       ReadMode "raw";
	       $key = ReadKey 0, *TTY;
	       ReadMode "normal";
	       printf "\nYou said %s, char number %03d\n",
		       $key, ord $key;

       How can I tell whether there's a character waiting on a filehandle?

       The very first thing you should do is look into getting the Term::Read‐
       Key extension from CPAN.	 As we mentioned earlier, it now even has lim‐
       ited support for non-portable (read: not open systems, closed, propri‐
       etary, not POSIX, not Unix, etc) systems.

       You should also check out the Frequently Asked Questions list in
       comp.unix.* for things like this: the answer is essentially the same.
       It's very system dependent.  Here's one solution that works on BSD sys‐
       tems:

	       sub key_ready {
		       my($rin, $nfd);
		       vec($rin, fileno(STDIN), 1) = 1;
		       return $nfd = select($rin,undef,undef,0);
		       }

       If you want to find out how many characters are waiting, there's also
       the FIONREAD ioctl call to be looked at.	 The h2ph tool that comes with
       Perl tries to convert C include files to Perl code, which can be
       "require"d.  FIONREAD ends up defined as a function in the sys/ioctl.ph
       file:

	       require 'sys/ioctl.ph';

	       $size = pack("L", 0);
	       ioctl(FH, FIONREAD(), $size)    or die "Couldn't call ioctl: $!\n";
	       $size = unpack("L", $size);

       If h2ph wasn't installed or doesn't work for you, you can grep the
       include files by hand:

	       % grep FIONREAD /usr/include/*/*
	       /usr/include/asm/ioctls.h:#define FIONREAD      0x541B

       Or write a small C program using the editor of champions:

	       % cat > fionread.c
	       #include <sys/ioctl.h>
	       main() {
		   printf("%#08x\n", FIONREAD);
	       }
	       ^D
	       % cc -o fionread fionread.c
	       % ./fionread
	       0x4004667f

       And then hard code it, leaving porting as an exercise to your succes‐
       sor.

	       $FIONREAD = 0x4004667f;	       # XXX: opsys dependent

	       $size = pack("L", 0);
	       ioctl(FH, $FIONREAD, $size)     or die "Couldn't call ioctl: $!\n";
	       $size = unpack("L", $size);

       FIONREAD requires a filehandle connected to a stream, meaning that
       sockets, pipes, and tty devices work, but not files.

       How do I do a "tail -f" in perl?

       First try

	       seek(GWFILE, 0, 1);

       The statement "seek(GWFILE, 0, 1)" doesn't change the current position,
       but it does clear the end-of-file condition on the handle, so that the
       next "<GWFILE>" makes Perl try again to read something.

       If that doesn't work (it relies on features of your stdio implementa‐
       tion), then you need something more like this:

	       for (;;) {
		 for ($curpos = tell(GWFILE); <GWFILE>; $curpos = tell(GWFILE)) {
		   # search for some stuff and put it into files
		 }
		 # sleep for a while
		 seek(GWFILE, $curpos, 0);  # seek to where we had been
	       }

       If this still doesn't work, look into the "clearerr" method from
       "IO::Handle", which resets the error and end-of-file states on the han‐
       dle.

       There's also a "File::Tail" module from CPAN.

       How do I dup() a filehandle in Perl?

       If you check "open" in perlfunc, you'll see that several of the ways to
       call open() should do the trick.	 For example:

	       open(LOG, ">>/foo/logfile");
	       open(STDERR, ">&LOG");

       Or even with a literal numeric descriptor:

	  $fd = $ENV{MHCONTEXTFD};
	  open(MHCONTEXT, "<&=$fd");   # like fdopen(3S)

       Note that "<&STDIN" makes a copy, but "<&=STDIN" make an alias.	That
       means if you close an aliased handle, all aliases become inaccessible.
       This is not true with a copied one.

       Error checking, as always, has been left as an exercise for the reader.

       How do I close a file descriptor by number?

       If, for some reason, you have a file descriptor instead of a filehandle
       (perhaps you used "POSIX::open"), you can use the "close()" function
       from the "POSIX" module:

	       use POSIX ();

	       POSIX::close( $fd );

       This should rarely be necessary, as the Perl "close()" function is to
       be used for things that Perl opened itself, even if it was a dup of a
       numeric descriptor as with "MHCONTEXT" above.  But if you really have
       to, you may be able to do this:

	       require 'sys/syscall.ph';
	       $rc = syscall(&SYS_close, $fd + 0);  # must force numeric
	       die "can't sysclose $fd: $!" unless $rc == -1;

       Or, just use the fdopen(3S) feature of "open()":

	       {
	       open my( $fh ), "<&=$fd" or die "Cannot reopen fd=$fd: $!";
	       close $fh;
	       }

       Why can't I use "C:\temp\foo" in DOS paths?  Why doesn't
       `C:\temp\foo.exe` work?

       Whoops!	You just put a tab and a formfeed into that filename!  Remem‐
       ber that within double quoted strings ("like\this"), the backslash is
       an escape character.  The full list of these is in "Quote and Quote-
       like Operators" in perlop.  Unsurprisingly, you don't have a file
       called "c:(tab)emp(formfeed)oo" or "c:(tab)emp(formfeed)oo.exe" on your
       legacy DOS filesystem.

       Either single-quote your strings, or (preferably) use forward slashes.
       Since all DOS and Windows versions since something like MS-DOS 2.0 or
       so have treated "/" and "\" the same in a path, you might as well use
       the one that doesn't clash with Perl--or the POSIX shell, ANSI C and
       C++, awk, Tcl, Java, or Python, just to mention a few.  POSIX paths are
       more portable, too.

       Why doesn't glob("*.*") get all the files?

       Because even on non-Unix ports, Perl's glob function follows standard
       Unix globbing semantics.	 You'll need "glob("*")" to get all (non-hid‐
       den) files.  This makes glob() portable even to legacy systems.	Your
       port may include proprietary globbing functions as well.	 Check its
       documentation for details.

       Why does Perl let me delete read-only files?  Why does "-i" clobber
       protected files?	 Isn't this a bug in Perl?

       This is elaborately and painstakingly described in the file-dir-perms
       article in the "Far More Than You Ever Wanted To Know" collection in
       http://www.cpan.org/misc/olddoc/FMTEYEWTK.tgz .

       The executive summary: learn how your filesystem works.	The permis‐
       sions on a file say what can happen to the data in that file.  The per‐
       missions on a directory say what can happen to the list of files in
       that directory.	If you delete a file, you're removing its name from
       the directory (so the operation depends on the permissions of the
       directory, not of the file).  If you try to write to the file, the per‐
       missions of the file govern whether you're allowed to.

       How do I select a random line from a file?

       Here's an algorithm from the Camel Book:

	       srand;
	       rand($.) < 1 && ($line = $_) while <>;

       This has a significant advantage in space over reading the whole file
       in.  You can find a proof of this method in The Art of Computer Pro‐
       gramming, Volume 2, Section 3.4.2, by Donald E. Knuth.

       You can use the File::Random module which provides a function for that
       algorithm:

	       use File::Random qw/random_line/;
	       my $line = random_line($filename);

       Another way is to use the Tie::File module, which treats the entire
       file as an array.  Simply access a random array element.

       Why do I get weird spaces when I print an array of lines?

       Saying

	       print "@lines\n";

       joins together the elements of @lines with a space between them.	 If
       @lines were "("little", "fluffy", "clouds")" then the above statement
       would print

	       little fluffy clouds

       but if each element of @lines was a line of text, ending a newline
       character "("little\n", "fluffy\n", "clouds\n")" then it would print:

	       little
		fluffy
		clouds

       If your array contains lines, just print them:

	       print @lines;

REVISION
       Revision: $Revision: 10126 $

       Date: $Date: 2007-10-27 21:29:20 +0200 (Sat, 27 Oct 2007) $

       See perlfaq for source control details and availability.

AUTHOR AND COPYRIGHT
       Copyright (c) 1997-2007 Tom Christiansen, Nathan Torkington, and other
       authors as noted. All rights reserved.

       This documentation is free; you can redistribute it and/or modify it
       under the same terms as Perl itself.

       Irrespective of its distribution, all code examples here are in the
       public domain.  You are permitted and encouraged to use this code and
       any derivatives thereof in your own programs for fun or for profit as
       you see fit.  A simple comment in the code giving credit to the FAQ
       would be courteous but is not required.

perl v5.8.8			  2008-09-19			   PERLFAQ5(1)
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server AIX

List of man pages available for AIX

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net