perl5180delta man page on SmartOS

Printed from http://www.polarhome.com/service/man/?qf=perl5180delta&af=0&tf=2&of=SmartOS

PERL5180DELTA(1)       Perl Programmers Reference Guide	      PERL5180DELTA(1)

NAME
       perl5180delta - what is new for perl v5.18.0

DESCRIPTION
       This document describes differences between the v5.16.0 release and the
       v5.18.0 release.

       If you are upgrading from an earlier release such as v5.14.0, first
       read perl5160delta, which describes differences between v5.14.0 and
       v5.16.0.

Core Enhancements
   New mechanism for experimental features
       Newly-added experimental features will now require this incantation:

	   no warnings "experimental::feature_name";
	   use feature "feature_name";	# would warn without the prev line

       There is a new warnings category, called "experimental", containing
       warnings that the feature pragma emits when enabling experimental
       features.

       Newly-added experimental features will also be given special warning
       IDs, which consist of "experimental::" followed by the name of the
       feature.	 (The plan is to extend this mechanism eventually to all
       warnings, to allow them to be enabled or disabled individually, and not
       just by category.)

       By saying

	   no warnings "experimental::feature_name";

       you are taking responsibility for any breakage that future changes to,
       or removal of, the feature may cause.

       Since some features (like "~~" or "my $_") now emit experimental
       warnings, and you may want to disable them in code that is also run on
       perls that do not recognize these warning categories, consider using
       the "if" pragma like this:

	   no if $] >= 5.018, warnings => "experimental::feature_name";

       Existing experimental features may begin emitting these warnings, too.
       Please consult perlexperiment for information on which features are
       considered experimental.

   Hash overhaul
       Changes to the implementation of hashes in perl v5.18.0 will be one of
       the most visible changes to the behavior of existing code.

       By default, two distinct hash variables with identical keys and values
       may now provide their contents in a different order where it was
       previously identical.

       When encountering these changes, the key to cleaning up from them is to
       accept that hashes are unordered collections and to act accordingly.

       Hash randomization

       The seed used by Perl's hash function is now random.  This means that
       the order which keys/values will be returned from functions like
       "keys()", "values()", and "each()" will differ from run to run.

       This change was introduced to make Perl's hashes more robust to
       algorithmic complexity attacks, and also because we discovered that it
       exposes hash ordering dependency bugs and makes them easier to track
       down.

       Toolchain maintainers might want to invest in additional infrastructure
       to test for things like this.  Running tests several times in a row and
       then comparing results will make it easier to spot hash order
       dependencies in code.  Authors are strongly encouraged not to expose
       the key order of Perl's hashes to insecure audiences.

       Further, every hash has its own iteration order, which should make it
       much more difficult to determine what the current hash seed is.

       New hash functions

       Perl v5.18 includes support for multiple hash functions, and changed
       the default (to ONE_AT_A_TIME_HARD), you can choose a different
       algorithm by defining a symbol at compile time.	For a current list,
       consult the INSTALL document.  Note that as of Perl v5.18 we can only
       recommend use of the default or SIPHASH. All the others are known to
       have security issues and are for research purposes only.

       PERL_HASH_SEED environment variable now takes a hex value

       "PERL_HASH_SEED" no longer accepts an integer as a parameter; instead
       the value is expected to be a binary value encoded in a hex string,
       such as "0xf5867c55039dc724".  This is to make the infrastructure
       support hash seeds of arbitrary lengths, which might exceed that of an
       integer.	 (SipHash uses a 16 byte seed.)

       PERL_PERTURB_KEYS environment variable added

       The "PERL_PERTURB_KEYS" environment variable allows one to control the
       level of randomization applied to "keys" and friends.

       When "PERL_PERTURB_KEYS" is 0, perl will not randomize the key order at
       all. The chance that "keys" changes due to an insert will be the same
       as in previous perls, basically only when the bucket size is changed.

       When "PERL_PERTURB_KEYS" is 1, perl will randomize keys in a non-
       repeatable way. The chance that "keys" changes due to an insert will be
       very high.  This is the most secure and default mode.

       When "PERL_PERTURB_KEYS" is 2, perl will randomize keys in a repeatable
       way.  Repeated runs of the same program should produce the same output
       every time.

       "PERL_HASH_SEED" implies a non-default "PERL_PERTURB_KEYS" setting.
       Setting "PERL_HASH_SEED=0" (exactly one 0) implies
       "PERL_PERTURB_KEYS=0" (hash key randomization disabled); settng
       "PERL_HASH_SEED" to any other value implies "PERL_PERTURB_KEYS=2"
       (deterministic and repeatable hash key randomization).  Specifying
       "PERL_PERTURB_KEYS" explicitly to a different level overrides this
       behavior.

       Hash::Util::hash_seed() now returns a string

       Hash::Util::hash_seed() now returns a string instead of an integer.
       This is to make the infrastructure support hash seeds of arbitrary
       lengths which might exceed that of an integer.  (SipHash uses a 16 byte
       seed.)

       Output of PERL_HASH_SEED_DEBUG has been changed

       The environment variable PERL_HASH_SEED_DEBUG now makes perl show both
       the hash function perl was built with, and the seed, in hex, in use for
       that process. Code parsing this output, should it exist, must change to
       accommodate the new format.  Example of the new format:

	   $ PERL_HASH_SEED_DEBUG=1 ./perl -e1
	   HASH_FUNCTION = MURMUR3 HASH_SEED = 0x1476bb9f

   Upgrade to Unicode 6.2
       Perl now supports Unicode 6.2.  A list of changes from Unicode 6.1 is
       at <http://www.unicode.org/versions/Unicode6.2.0>.

   Character name aliases may now include non-Latin1-range characters
       It is possible to define your own names for characters for use in
       "\N{...}", "charnames::vianame()", etc.	These names can now be
       comprised of characters from the whole Unicode range.  This allows for
       names to be in your native language, and not just English.  Certain
       restrictions apply to the characters that may be used (you can't define
       a name that has punctuation in it, for example).	 See "CUSTOM ALIASES"
       in charnames.

   New DTrace probes
       The following new DTrace probes have been added:

       ·   "op-entry"

       ·   "loading-file"

       ·   "loaded-file"

   "${^LAST_FH}"
       This new variable provides access to the filehandle that was last read.
       This is the handle used by $. and by "tell" and "eof" without
       arguments.

   Regular Expression Set Operations
       This is an experimental feature to allow matching against the union,
       intersection, etc., of sets of code points, similar to
       Unicode::Regex::Set.  It can also be used to extend "/x" processing to
       [bracketed] character classes, and as a replacement of user-defined
       properties, allowing more complex expressions than they do.  See
       "Extended Bracketed Character Classes" in perlrecharclass.

   Lexical subroutines
       This new feature is still considered experimental.  To enable it:

	   use 5.018;
	   no warnings "experimental::lexical_subs";
	   use feature "lexical_subs";

       You can now declare subroutines with "state sub foo", "my sub foo", and
       "our sub foo".  ("state sub" requires that the "state" feature be
       enabled, unless you write it as "CORE::state sub foo".)

       "state sub" creates a subroutine visible within the lexical scope in
       which it is declared.  The subroutine is shared between calls to the
       outer sub.

       "my sub" declares a lexical subroutine that is created each time the
       enclosing block is entered.  "state sub" is generally slightly faster
       than "my sub".

       "our sub" declares a lexical alias to the package subroutine of the
       same name.

       For more information, see "Lexical Subroutines" in perlsub.

   Computed Labels
       The loop controls "next", "last" and "redo", and the special "dump"
       operator, now allow arbitrary expressions to be used to compute labels
       at run time.  Previously, any argument that was not a constant was
       treated as the empty string.

   More CORE:: subs
       Several more built-in functions have been added as subroutines to the
       CORE:: namespace - namely, those non-overridable keywords that can be
       implemented without custom parsers: "defined", "delete", "exists",
       "glob", "pos", "protoytpe", "scalar", "split", "study", and "undef".

       As some of these have prototypes, "prototype('CORE::...')" has been
       changed to not make a distinction between overridable and non-
       overridable keywords.  This is to make "prototype('CORE::pos')"
       consistent with "prototype(&CORE::pos)".

   "kill" with negative signal names
       "kill" has always allowed a negative signal number, which kills the
       process group instead of a single process.  It has also allowed signal
       names.  But it did not behave consistently, because negative signal
       names were treated as 0.	 Now negative signals names like "-INT" are
       supported and treated the same way as -2 [perl #112990].

Security
   See also: hash overhaul
       Some of the changes in the hash overhaul were made to enhance security.
       Please read that section.

   "Storable" security warning in documentation
       The documentation for "Storable" now includes a section which warns
       readers of the danger of accepting Storable documents from untrusted
       sources. The short version is that deserializing certain types of data
       can lead to loading modules and other code execution. This is
       documented behavior and wanted behavior, but this opens an attack
       vector for malicious entities.

   "Locale::Maketext" allowed code injection via a malicious template
       If users could provide a translation string to Locale::Maketext, this
       could be used to invoke arbitrary Perl subroutines available in the
       current process.

       This has been fixed, but it is still possible to invoke any method
       provided by "Locale::Maketext" itself or a subclass that you are using.
       One of these methods in turn will invoke the Perl core's "sprintf"
       subroutine.

       In summary, allowing users to provide translation strings without
       auditing them is a bad idea.

       This vulnerability is documented in CVE-2012-6329.

   Avoid calling memset with a negative count
       Poorly written perl code that allows an attacker to specify the count
       to perl's "x" string repeat operator can already cause a memory
       exhaustion denial-of-service attack. A flaw in versions of perl before
       v5.15.5 can escalate that into a heap buffer overrun; coupled with
       versions of glibc before 2.16, it possibly allows the execution of
       arbitrary code.

       The flaw addressed to this commit has been assigned identifier
       CVE-2012-5195 and was researched by Tim Brown.

Incompatible Changes
   See also: hash overhaul
       Some of the changes in the hash overhaul are not fully compatible with
       previous versions of perl.  Please read that section.

   An unknown character name in "\N{...}" is now a syntax error
       Previously, it warned, and the Unicode REPLACEMENT CHARACTER was
       substituted.  Unicode now recommends that this situation be a syntax
       error.  Also, the previous behavior led to some confusing warnings and
       behaviors, and since the REPLACEMENT CHARACTER has no use other than as
       a stand-in for some unknown character, any code that has this problem
       is buggy.

   Formerly deprecated characters in "\N{}" character name aliases are now
       errors.
       Since v5.12.0, it has been deprecated to use certain characters in
       user-defined "\N{...}" character names.	These now cause a syntax
       error.  For example, it is now an error to begin a name with a digit,
       such as in

	my $undraftable = "\N{4F}";    # Syntax error!

       or to have commas anywhere in the name.	See "CUSTOM ALIASES" in
       charnames.

   "\N{BELL}" now refers to U+1F514 instead of U+0007
       Unicode 6.0 reused the name "BELL" for a different code point than it
       traditionally had meant.	 Since Perl v5.14, use of this name still
       referred to U+0007, but would raise a deprecation warning.  Now, "BELL"
       refers to U+1F514, and the name for U+0007 is "ALERT".  All the
       functions in charnames have been correspondingly updated.

   New Restrictions in Multi-Character Case-Insensitive Matching in Regular
       Expression Bracketed Character Classes
       Unicode has now withdrawn their previous recommendation for regular
       expressions to automatically handle cases where a single character can
       match multiple characters case-insensitively, for example, the letter
       LATIN SMALL LETTER SHARP S and the sequence "ss".  This is because it
       turns out to be impracticable to do this correctly in all
       circumstances.  Because Perl has tried to do this as best it can, it
       will continue to do so.	(We are considering an option to turn it off.)
       However, a new restriction is being added on such matches when they
       occur in [bracketed] character classes.	People were specifying things
       such as "/[\0-\xff]/i", and being surprised that it matches the two
       character sequence "ss" (since LATIN SMALL LETTER SHARP S occurs in
       this range).  This behavior is also inconsistent with using a property
       instead of a range:  "\p{Block=Latin1}" also includes LATIN SMALL
       LETTER SHARP S, but "/[\p{Block=Latin1}]/i" does not match "ss".	 The
       new rule is that for there to be a multi-character case-insensitive
       match within a bracketed character class, the character must be
       explicitly listed, and not as an end point of a range.  This more
       closely obeys the Principle of Least Astonishment.  See "Bracketed
       Character Classes" in perlrecharclass.  Note that a bug [perl #89774],
       now fixed as part of this change, prevented the previous behavior from
       working fully.

   Explicit rules for variable names and identifiers
       Due to an oversight, single character variable names in v5.16 were
       completely unrestricted.	 This opened the door to several kinds of
       insanity.  As of v5.18, these now follow the rules of other
       identifiers, in addition to accepting characters that match the
       "\p{POSIX_Punct}" property.

       There is no longer any difference in the parsing of identifiers
       specified by using braces versus without braces.	 For instance, perl
       used to allow "${foo:bar}" (with a single colon) but not $foo:bar.  Now
       that both are handled by a single code path, they are both treated the
       same way: both are forbidden.  Note that this change is about the range
       of permissible literal identifiers, not other expressions.

   Vertical tabs are now whitespace
       No one could recall why "\s" didn't match "\cK", the vertical tab.  Now
       it does.	 Given the extreme rarity of that character, very little
       breakage is expected.  That said, here's what it means:

       "\s" in a regex now matches a vertical tab in all circumstances.

       Literal vertical tabs in a regex literal are ignored when the "/x"
       modifier is used.

       Leading vertical tabs, alone or mixed with other whitespace, are now
       ignored when interpreting a string as a number.	For example:

	 $dec = " \cK \t 123";
	 $hex = " \cK \t 0xF";

	 say 0 + $dec;	 # was 0 with warning, now 123
	 say int $dec;	 # was 0, now 123
	 say oct $hex;	 # was 0, now  15

   "/(?{})/" and "/(??{})/" have been heavily reworked
       The implementation of this feature has been almost completely
       rewritten.  Although its main intent is to fix bugs, some behaviors,
       especially related to the scope of lexical variables, will have
       changed.	 This is described more fully in the "Selected Bug Fixes"
       section.

   Stricter parsing of substitution replacement
       It is no longer possible to abuse the way the parser parses "s///e"
       like this:

	   %_=(_,"Just another ");
	   $_="Perl hacker,\n";
	   s//_}->{_/e;print

   "given" now aliases the global $_
       Instead of assigning to an implicit lexical $_, "given" now makes the
       global $_ an alias for its argument, just like "foreach".  However, it
       still uses lexical $_ if there is lexical $_ in scope (again, just like
       "foreach") [perl #114020].

   The smartmatch family of features are now experimental
       Smart match, added in v5.10.0 and significantly revised in v5.10.1, has
       been a regular point of complaint.  Although there are a number of ways
       in which it is useful, it has also proven problematic and confusing for
       both users and implementors of Perl.  There have been a number of
       proposals on how to best address the problem.  It is clear that
       smartmatch is almost certainly either going to change or go away in the
       future.	Relying on its current behavior is not recommended.

       Warnings will now be issued when the parser sees "~~", "given", or
       "when".	To disable these warnings, you can add this line to the
       appropriate scope:

	 no if $] >= 5.018, warnings => "experimental::smartmatch";

       Consider, though, replacing the use of these features, as they may
       change behavior again before becoming stable.

   Lexical $_ is now experimental
       Since it was introduced in Perl v5.10, it has caused much confusion
       with no obvious solution:

       ·   Various modules (e.g., List::Util) expect callback routines to use
	   the global $_.  "use List::Util 'first'; my $_; first { $_ == 1 }
	   @list" does not work as one would expect.

       ·   A "my $_" declaration earlier in the same file can cause confusing
	   closure warnings.

       ·   The "_" subroutine prototype character allows called subroutines to
	   access your lexical $_, so it is not really private after all.

       ·   Nevertheless, subroutines with a "(@)" prototype and methods cannot
	   access the caller's lexical $_, unless they are written in XS.

       ·   But even XS routines cannot access a lexical $_ declared, not in
	   the calling subroutine, but in an outer scope, iff that subroutine
	   happened not to mention $_ or use any operators that default to $_.

       It is our hope that lexical $_ can be rehabilitated, but this may cause
       changes in its behavior.	 Please use it with caution until it becomes
       stable.

   readline() with "$/ = \N" now reads N characters, not N bytes
       Previously, when reading from a stream with I/O layers such as
       "encoding", the readline() function, otherwise known as the "<>"
       operator, would read N bytes from the top-most layer. [perl #79960]

       Now, N characters are read instead.

       There is no change in behaviour when reading from streams with no extra
       layers, since bytes map exactly to characters.

   Overridden "glob" is now passed one argument
       "glob" overrides used to be passed a magical undocumented second
       argument that identified the caller.  Nothing on CPAN was using this,
       and it got in the way of a bug fix, so it was removed.  If you really
       need to identify the caller, see Devel::Callsite on CPAN.

   Here doc parsing
       The body of a here document inside a quote-like operator now always
       begins on the line after the "<<foo" marker.  Previously, it was
       documented to begin on the line following the containing quote-like
       operator, but that was only sometimes the case [perl #114040].

   Alphanumeric operators must now be separated from the closing delimiter of
       regular expressions
       You may no longer write something like:

	m/a/and 1

       Instead you must write

	m/a/ and 1

       with whitespace separating the operator from the closing delimiter of
       the regular expression.	Not having whitespace has resulted in a
       deprecation warning since Perl v5.14.0.

   qw(...) can no longer be used as parentheses
       "qw" lists used to fool the parser into thinking they were always
       surrounded by parentheses.  This permitted some surprising
       constructions such as "foreach $x qw(a b c) {...}", which should really
       be written "foreach $x (qw(a b c)) {...}".  These would sometimes get
       the lexer into the wrong state, so they didn't fully work, and the
       similar "foreach qw(a b c) {...}" that one might expect to be permitted
       never worked at all.

       This side effect of "qw" has now been abolished.	 It has been
       deprecated since Perl v5.13.11.	It is now necessary to use real
       parentheses everywhere that the grammar calls for them.

   Interaction of lexical and default warnings
       Turning on any lexical warnings used first to disable all default
       warnings if lexical warnings were not already enabled:

	   $*; # deprecation warning
	   use warnings "void";
	   $#; # void warning; no deprecation warning

       Now, the "debugging", "deprecated", "glob", "inplace" and "malloc"
       warnings categories are left on when turning on lexical warnings
       (unless they are turned off by "no warnings", of course).

       This may cause deprecation warnings to occur in code that used to be
       free of warnings.

       Those are the only categories consisting only of default warnings.
       Default warnings in other categories are still disabled by "use
       warnings "category"", as we do not yet have the infrastructure for
       controlling individual warnings.

   "state sub" and "our sub"
       Due to an accident of history, "state sub" and "our sub" were
       equivalent to a plain "sub", so one could even create an anonymous sub
       with "our sub { ... }".	These are now disallowed outside of the
       "lexical_subs" feature.	Under the "lexical_subs" feature they have new
       meanings described in "Lexical Subroutines" in perlsub.

   Defined values stored in environment are forced to byte strings
       A value stored in an environment variable has always been stringified.
       In this release, it is converted to be only a byte string.  First, it
       is forced to be only a string.  Then if the string is utf8 and the
       equivalent of "utf8::downgrade()" works, that result is used;
       otherwise, the equivalent of "utf8::encode()" is used, and a warning is
       issued about wide characters ("Diagnostics").

   "require" dies for unreadable files
       When "require" encounters an unreadable file, it now dies.  It used to
       ignore the file and continue searching the directories in @INC [perl
       #113422].

   "gv_fetchmeth_*" and SUPER
       The various "gv_fetchmeth_*" XS functions used to treat a package whose
       named ended with "::SUPER" specially.  A method lookup on the
       "Foo::SUPER" package would be treated as a "SUPER" method lookup on the
       "Foo" package.  This is no longer the case.  To do a "SUPER" lookup,
       pass the "Foo" stash and the "GV_SUPER" flag.

   "split"'s first argument is more consistently interpreted
       After some changes earlier in v5.17, "split"'s behavior has been
       simplified: if the PATTERN argument evaluates to a string containing
       one space, it is treated the way that a literal string containing one
       space once was.

Deprecations
   Module removals
       The following modules will be removed from the core distribution in a
       future release, and will at that time need to be installed from CPAN.
       Distributions on CPAN which require these modules will need to list
       them as prerequisites.

       The core versions of these modules will now issue "deprecated"-category
       warnings to alert you to this fact. To silence these deprecation
       warnings, install the modules in question from CPAN.

       Note that these are (with rare exceptions) fine modules that you are
       encouraged to continue to use. Their disinclusion from core primarily
       hinges on their necessity to bootstrapping a fully functional, CPAN-
       capable Perl installation, not usually on concerns over their design.

       encoding
	   The use of this pragma is now strongly discouraged. It conflates
	   the encoding of source text with the encoding of I/O data,
	   reinterprets escape sequences in source text (a questionable
	   choice), and introduces the UTF-8 bug to all runtime handling of
	   character strings. It is broken as designed and beyond repair.

	   For using non-ASCII literal characters in source text, please refer
	   to utf8.  For dealing with textual I/O data, please refer to Encode
	   and open.

       Archive::Extract
       B::Lint
       B::Lint::Debug
       CPANPLUS and all included "CPANPLUS::*" modules
       Devel::InnerPackage
       Log::Message
       Log::Message::Config
       Log::Message::Handlers
       Log::Message::Item
       Log::Message::Simple
       Module::Pluggable
       Module::Pluggable::Object
       Object::Accessor
       Pod::LaTeX
       Term::UI
       Term::UI::History

   Deprecated Utilities
       The following utilities will be removed from the core distribution in a
       future release as their associated modules have been deprecated. They
       will remain available with the applicable CPAN distribution.

       cpanp
       "cpanp-run-perl"
       cpan2dist
	   These items are part of the "CPANPLUS" distribution.

       pod2latex
	   This item is part of the "Pod::LaTeX" distribution.

   PL_sv_objcount
       This interpreter-global variable used to track the total number of Perl
       objects in the interpreter. It is no longer maintained and will be
       removed altogether in Perl v5.20.

   Five additional characters should be escaped in patterns with "/x"
       When a regular expression pattern is compiled with "/x", Perl treats 6
       characters as white space to ignore, such as SPACE and TAB.  However,
       Unicode recommends 11 characters be treated thusly.  We will conform
       with this in a future Perl version.  In the meantime, use of any of the
       missing characters will raise a deprecation warning, unless turned off.
       The five characters are:

	   U+0085 NEXT LINE
	   U+200E LEFT-TO-RIGHT MARK
	   U+200F RIGHT-TO-LEFT MARK
	   U+2028 LINE SEPARATOR
	   U+2029 PARAGRAPH SEPARATOR

   User-defined charnames with surprising whitespace
       A user-defined character name with trailing or multiple spaces in a row
       is likely a typo.  This now generates a warning when defined, on the
       assumption that uses of it will be unlikely to include the excess
       whitespace.

   Various XS-callable functions are now deprecated
       All the functions used to classify characters will be removed from a
       future version of Perl, and should not be used.	With participating C
       compilers (e.g., gcc), compiling any file that uses any of these will
       generate a warning.  These were not intended for public use; there are
       equivalent, faster, macros for most of them.

       See "Character classes" in perlapi.  The complete list is:

       "is_uni_alnum", "is_uni_alnumc", "is_uni_alnumc_lc", "is_uni_alnum_lc",
       "is_uni_alpha", "is_uni_alpha_lc", "is_uni_ascii", "is_uni_ascii_lc",
       "is_uni_blank", "is_uni_blank_lc", "is_uni_cntrl", "is_uni_cntrl_lc",
       "is_uni_digit", "is_uni_digit_lc", "is_uni_graph", "is_uni_graph_lc",
       "is_uni_idfirst", "is_uni_idfirst_lc", "is_uni_lower",
       "is_uni_lower_lc", "is_uni_print", "is_uni_print_lc", "is_uni_punct",
       "is_uni_punct_lc", "is_uni_space", "is_uni_space_lc", "is_uni_upper",
       "is_uni_upper_lc", "is_uni_xdigit", "is_uni_xdigit_lc",
       "is_utf8_alnum", "is_utf8_alnumc", "is_utf8_alpha", "is_utf8_ascii",
       "is_utf8_blank", "is_utf8_char", "is_utf8_cntrl", "is_utf8_digit",
       "is_utf8_graph", "is_utf8_idcont", "is_utf8_idfirst", "is_utf8_lower",
       "is_utf8_mark", "is_utf8_perl_space", "is_utf8_perl_word",
       "is_utf8_posix_digit", "is_utf8_print", "is_utf8_punct",
       "is_utf8_space", "is_utf8_upper", "is_utf8_xdigit", "is_utf8_xidcont",
       "is_utf8_xidfirst".

       In addition these three functions that have never worked properly are
       deprecated: "to_uni_lower_lc", "to_uni_title_lc", and
       "to_uni_upper_lc".

   Certain rare uses of backslashes within regexes are now deprecated
       There are three pairs of characters that Perl recognizes as
       metacharacters in regular expression patterns: "{}", "[]", and "()".
       These can be used as well to delimit patterns, as in:

	 m{foo}
	 s(foo)(bar)

       Since they are metacharacters, they have special meaning to regular
       expression patterns, and it turns out that you can't turn off that
       special meaning by the normal means of preceding them with a backslash,
       if you use them, paired, within a pattern delimited by them.  For
       example, in

	 m{foo\{1,3\}}

       the backslashes do not change the behavior, and this matches "f o"
       followed by one to three more occurrences of "o".

       Usages like this, where they are interpreted as metacharacters, are
       exceedingly rare; we think there are none, for example, in all of CPAN.
       Hence, this deprecation should affect very little code.	It does give
       notice, however, that any such code needs to change, which will in turn
       allow us to change the behavior in future Perl versions so that the
       backslashes do have an effect, and without fear that we are silently
       breaking any existing code.

   Splitting the tokens "(?" and "(*" in regular expressions
       A deprecation warning is now raised if the "(" and "?" are separated by
       white space or comments in "(?...)" regular expression constructs.
       Similarly, if the "(" and "*" are separated in "(*VERB...)"
       constructs.

   Pre-PerlIO IO implementations
       In theory, you can currently build perl without PerlIO.	Instead, you'd
       use a wrapper around stdio or sfio.  In practice, this isn't very
       useful.	It's not well tested, and without any support for IO layers or
       (thus) Unicode, it's not much of a perl.	 Building without PerlIO will
       most likely be removed in the next version of perl.

       PerlIO supports a "stdio" layer if stdio use is desired.	 Similarly a
       sfio layer could be produced in the future, if needed.

Future Deprecations
       ·   Platforms without support infrastructure

	   Both Windows CE and z/OS have been historically under-maintained,
	   and are currently neither successfully building nor regularly being
	   smoke tested.  Efforts are underway to change this situation, but
	   it should not be taken for granted that the platforms are safe and
	   supported.  If they do not become buildable and regularly smoked,
	   support for them may be actively removed in future releases.	 If
	   you have an interest in these platforms and you can lend your time,
	   expertise, or hardware to help support these platforms, please let
	   the perl development effort know by emailing
	   "perl5-porters@perl.org".

	   Some platforms that appear otherwise entirely dead are also on the
	   short list for removal between now and v5.20.0:

	   DG/UX
	   NeXT

	   We also think it likely that current versions of Perl will no
	   longer build AmigaOS, DJGPP, NetWare (natively), OS/2 and Plan 9.
	   If you are using Perl on such a platform and have an interest in
	   ensuring Perl's future on them, please contact us.

	   We believe that Perl has long been unable to build on mixed endian
	   architectures (such as PDP-11s), and intend to remove any remaining
	   support code. Similarly, code supporting the long umaintained GNU
	   dld will be removed soon if no-one makes themselves known as an
	   active user.

       ·   Swapping of $< and $>

	   Perl has supported the idiom of swapping $< and $> (and likewise $(
	   and $)) to temporarily drop permissions since 5.0, like this:

	       ($<, $>) = ($>, $<);

	   However, this idiom modifies the real user/group id, which can have
	   undesirable side-effects, is no longer useful on any platform perl
	   supports and complicates the implementation of these variables and
	   list assignment in general.

	   As an alternative, assignment only to $> is recommended:

	       local $> = $<;

	   See also: Setuid Demystified
	   <http://www.cs.berkeley.edu/~daw/papers/setuid-usenix02.pdf>.

       ·   "microperl", long broken and of unclear present purpose, will be
	   removed.

       ·   Revamping "\Q" semantics in double-quotish strings when combined
	   with other escapes.

	   There are several bugs and inconsistencies involving combinations
	   of "\Q" and escapes like "\x", "\L", etc., within a "\Q...\E" pair.
	   These need to be fixed, and doing so will necessarily change
	   current behavior.  The changes have not yet been settled.

       ·   Use of $x, where "x" stands for any actual (non-printing) C0
	   control character will be disallowed in a future Perl version.  Use
	   "${x}" instead (where again "x" stands for a control character), or
	   better, $^A , where "^" is a caret (CIRCUMFLEX ACCENT), and "A"
	   stands for any of the characters listed at the end of "OPERATOR
	   DIFFERENCES" in perlebcdic.

Performance Enhancements
       ·   Lists of lexical variable declarations ("my($x, $y)") are now
	   optimised down to a single op and are hence faster than before.

       ·   A new C preprocessor define "NO_TAINT_SUPPORT" was added that, if
	   set, disables Perl's taint support altogether.  Using the -T or -t
	   command line flags will cause a fatal error.	 Beware that both core
	   tests as well as many a CPAN distribution's tests will fail with
	   this change.	 On the upside, it provides a small performance
	   benefit due to reduced branching.

	   Do not enable this unless you know exactly what you are getting
	   yourself into.

       ·   "pack" with constant arguments is now constant folded in most cases
	   [perl #113470].

       ·   Speed up in regular expression matching against Unicode properties.
	   The largest gain is for "\X", the Unicode "extended grapheme
	   cluster."  The gain for it is about 35% - 40%.  Bracketed character
	   classes, e.g., "[0-9\x{100}]" containing code points above 255 are
	   also now faster.

       ·   On platforms supporting it, several former macros are now
	   implemented as static inline functions. This should speed things up
	   slightly on non-GCC platforms.

       ·   The optimisation of hashes in boolean context has been extended to
	   affect "scalar(%hash)", "%hash ? ... : ...", and "sub { %hash ||
	   ... }".

       ·   Filetest operators manage the stack in a fractionally more
	   efficient manner.

       ·   Globs used in a numeric context are now numified directly in most
	   cases, rather than being numified via stringification.

       ·   The "x" repetition operator is now folded to a single constant at
	   compile time if called in scalar context with constant operands and
	   no parentheses around the left operand.

Modules and Pragmata
   New Modules and Pragmata
       ·   Config::Perl::V version 0.16 has been added as a dual-lifed module.
	   It provides structured data retrieval of "perl -V" output including
	   information only known to the "perl" binary and not available via
	   Config.

   Updated Modules and Pragmata
       For a complete list of updates, run:

	 $ corelist --diff 5.16.0 5.18.0

       You can substitute your favorite version in place of 5.16.0, too.

       ·   Archive::Extract has been upgraded to 0.68.

	   Work around an edge case on Linux with Busybox's unzip.

       ·   Archive::Tar has been upgraded to 1.90.

	   ptar now supports the -T option as well as dashless options
	   [rt.cpan.org #75473], [rt.cpan.org #75475].

	   Auto-encode filenames marked as UTF-8 [rt.cpan.org #75474].

	   Don't use "tell" on IO::Zlib handles [rt.cpan.org #64339].

	   Don't try to "chown" on symlinks.

       ·   autodie has been upgraded to 2.13.

	   "autodie" now plays nicely with the 'open' pragma.

       ·   B has been upgraded to 1.42.

	   The "stashoff" method of COPs has been added.   This provides
	   access to an internal field added in perl 5.16 under threaded
	   builds [perl #113034].

	   "B::COP::stashpv" now supports UTF-8 package names and embedded
	   NULs.

	   All "CVf_*" and "GVf_*" and more SV-related flag values are now
	   provided as constants in the "B::" namespace and available for
	   export.  The default export list has not changed.

	   This makes the module work with the new pad API.

       ·   B::Concise has been upgraded to 0.95.

	   The "-nobanner" option has been fixed, and "format"s can now be
	   dumped.  When passed a sub name to dump, it will check also to see
	   whether it is the name of a format.	If a sub and a format share
	   the same name, it will dump both.

	   This adds support for the new "OpMAYBE_TRUEBOOL" and "OPpTRUEBOOL"
	   flags.

       ·   B::Debug has been upgraded to 1.18.

	   This adds support (experimentally) for "B::PADLIST", which was
	   added in Perl 5.17.4.

       ·   B::Deparse has been upgraded to 1.20.

	   Avoid warning when run under "perl -w".

	   It now deparses loop controls with the correct precedence, and
	   multiple statements in a "format" line are also now deparsed
	   correctly.

	   This release suppresses trailing semicolons in formats.

	   This release adds stub deparsing for lexical subroutines.

	   It no longer dies when deparsing "sort" without arguments.  It now
	   correctly omits the comma for "system $prog @args" and "exec $prog
	   @args".

       ·   bignum, bigint and bigrat have been upgraded to 0.33.

	   The overrides for "hex" and "oct" have been rewritten, eliminating
	   several problems, and making one incompatible change:

	   ·   Formerly, whichever of "use bigint" or "use bigrat" was
	       compiled later would take precedence over the other, causing
	       "hex" and "oct" not to respect the other pragma when in scope.

	   ·   Using any of these three pragmata would cause "hex" and "oct"
	       anywhere else in the program to evalute their arguments in list
	       context and prevent them from inferring $_ when called without
	       arguments.

	   ·   Using any of these three pragmata would make "oct("1234")"
	       return 1234 (for any number not beginning with 0) anywhere in
	       the program.  Now "1234" is translated from octal to decimal,
	       whether within the pragma's scope or not.

	   ·   The global overrides that facilitate lexical use of "hex" and
	       "oct" now respect any existing overrides that were in place
	       before the new overrides were installed, falling back to them
	       outside of the scope of "use bignum".

	   ·   "use bignum "hex"", "use bignum "oct"" and similar invocations
	       for bigint and bigrat now export a "hex" or "oct" function,
	       instead of providing a global override.

       ·   Carp has been upgraded to 1.29.

	   Carp is no longer confused when "caller" returns undef for a
	   package that has been deleted.

	   The "longmess()" and "shortmess()" functions are now documented.

       ·   CGI has been upgraded to 3.63.

	   Unrecognized HTML escape sequences are now handled better,
	   problematic trailing newlines are no longer inserted after <form>
	   tags by "startform()" or "start_form()", and bogus "Insecure
	   Dependency" warnings appearing with some versions of perl are now
	   worked around.

       ·   Class::Struct has been upgraded to 0.64.

	   The constructor now respects overridden accessor methods [perl
	   #29230].

       ·   Compress::Raw::Bzip2 has been upgraded to 2.060.

	   The misuse of Perl's "magic" API has been fixed.

       ·   Compress::Raw::Zlib has been upgraded to 2.060.

	   Upgrade bundled zlib to version 1.2.7.

	   Fix build failures on Irix, Solaris, and Win32, and also when
	   building as C++ [rt.cpan.org #69985], [rt.cpan.org #77030],
	   [rt.cpan.org #75222].

	   The misuse of Perl's "magic" API has been fixed.

	   "compress()", "uncompress()", "memGzip()" and "memGunzip()" have
	   been speeded up by making parameter validation more efficient.

       ·   CPAN::Meta::Requirements has been upgraded to 2.122.

	   Treat undef requirements to "from_string_hash" as 0 (with a
	   warning).

	   Added "requirements_for_module" method.

       ·   CPANPLUS has been upgraded to 0.9135.

	   Allow adding blib/script to PATH.

	   Save the history between invocations of the shell.

	   Handle multiple "makemakerargs" and "makeflags" arguments better.

	   This resolves issues with the SQLite source engine.

       ·   Data::Dumper has been upgraded to 2.145.

	   It has been optimized to only build a seen-scalar hash as
	   necessary, thereby speeding up serialization drastically.

	   Additional tests were added in order to improve statement, branch,
	   condition and subroutine coverage.  On the basis of the coverage
	   analysis, some of the internals of Dumper.pm were refactored.
	   Almost all methods are now documented.

       ·   DB_File has been upgraded to 1.827.

	   The main Perl module no longer uses the "@_" construct.

       ·   Devel::Peek has been upgraded to 1.11.

	   This fixes compilation with C++ compilers and makes the module work
	   with the new pad API.

       ·   Digest::MD5 has been upgraded to 2.52.

	   Fix "Digest::Perl::MD5" OO fallback [rt.cpan.org #66634].

       ·   Digest::SHA has been upgraded to 5.84.

	   This fixes a double-free bug, which might have caused
	   vulnerabilities in some cases.

       ·   DynaLoader has been upgraded to 1.18.

	   This is due to a minor code change in the XS for the VMS
	   implementation.

	   This fixes warnings about using "CODE" sections without an "OUTPUT"
	   section.

       ·   Encode has been upgraded to 2.49.

	   The Mac alias x-mac-ce has been added, and various bugs have been
	   fixed in Encode::Unicode, Encode::UTF7 and Encode::GSM0338.

       ·   Env has been upgraded to 1.04.

	   Its SPLICE implementation no longer misbehaves in list context.

       ·   ExtUtils::CBuilder has been upgraded to 0.280210.

	   Manifest files are now correctly embedded for those versions of
	   VC++ which make use of them. [perl #111782, #111798].

	   A list of symbols to export can now be passed to "link()" when on
	   Windows, as on other OSes [perl #115100].

       ·   ExtUtils::ParseXS has been upgraded to 3.18.

	   The generated C code now avoids unnecessarily incrementing
	   "PL_amagic_generation" on Perl versions where it's done
	   automatically (or on current Perl where the variable no longer
	   exists).

	   This avoids a bogus warning for initialised XSUB non-parameters
	   [perl #112776].

       ·   File::Copy has been upgraded to 2.26.

	   "copy()" no longer zeros files when copying into the same
	   directory, and also now fails (as it has long been documented to
	   do) when attempting to copy a file over itself.

       ·   File::DosGlob has been upgraded to 1.10.

	   The internal cache of file names that it keeps for each caller is
	   now freed when that caller is freed.	 This means "use File::DosGlob
	   'glob'; eval 'scalar <*>'" no longer leaks memory.

       ·   File::Fetch has been upgraded to 0.38.

	   Added the 'file_default' option for URLs that do not have a file
	   component.

	   Use "File::HomeDir" when available, and provide
	   "PERL5_CPANPLUS_HOME" to override the autodetection.

	   Always re-fetch CHECKSUMS if "fetchdir" is set.

       ·   File::Find has been upgraded to 1.23.

	   This fixes inconsistent unixy path handling on VMS.

	   Individual files may now appear in list of directories to be
	   searched [perl #59750].

       ·   File::Glob has been upgraded to 1.20.

	   File::Glob has had exactly the same fix as File::DosGlob.  Since it
	   is what Perl's own "glob" operator itself uses (except on VMS),
	   this means "eval 'scalar <*>'" no longer leaks.

	   A space-separated list of patterns return long lists of results no
	   longer results in memory corruption or crashes.  This bug was
	   introduced in Perl 5.16.0.  [perl #114984]

       ·   File::Spec::Unix has been upgraded to 3.40.

	   "abs2rel" could produce incorrect results when given two relative
	   paths or the root directory twice [perl #111510].

       ·   File::stat has been upgraded to 1.07.

	   "File::stat" ignores the filetest pragma, and warns when used in
	   combination therewith.  But it was not warning for "-r".  This has
	   been fixed [perl #111640].

	   "-p" now works, and does not return false for pipes [perl #111638].

	   Previously "File::stat"'s overloaded "-x" and "-X" operators did
	   not give the correct results for directories or executable files
	   when running as root. They had been treating executable permissions
	   for root just like for any other user, performing group membership
	   tests etc for files not owned by root. They now follow the correct
	   Unix behaviour - for a directory they are always true, and for a
	   file if any of the three execute permission bits are set then they
	   report that root can execute the file. Perl's builtin "-x" and "-X"
	   operators have always been correct.

       ·   File::Temp has been upgraded to 0.23

	   Fixes various bugs involving directory removal.  Defers unlinking
	   tempfiles if the initial unlink fails, which fixes problems on NFS.

       ·   GDBM_File has been upgraded to 1.15.

	   The undocumented optional fifth parameter to "TIEHASH" has been
	   removed. This was intended to provide control of the callback used
	   by "gdbm*" functions in case of fatal errors (such as filesystem
	   problems), but did not work (and could never have worked). No code
	   on CPAN even attempted to use it. The callback is now always the
	   previous default, "croak". Problems on some platforms with how the
	   "C" "croak" function is called have also been resolved.

       ·   Hash::Util has been upgraded to 0.15.

	   "hash_unlocked" and "hashref_unlocked" now returns true if the hash
	   is unlocked, instead of always returning false [perl #112126].

	   "hash_unlocked", "hashref_unlocked", "lock_hash_recurse" and
	   "unlock_hash_recurse" are now exportable [perl #112126].

	   Two new functions, "hash_locked" and "hashref_locked", have been
	   added.  Oddly enough, these two functions were already exported,
	   even though they did not exist [perl #112126].

       ·   HTTP::Tiny has been upgraded to 0.025.

	   Add SSL verification features [github #6], [github #9].

	   Include the final URL in the response hashref.

	   Add "local_address" option.

	   This improves SSL support.

       ·   IO has been upgraded to 1.28.

	   "sync()" can now be called on read-only file handles [perl #64772].

	   IO::Socket tries harder to cache or otherwise fetch socket
	   information.

       ·   IPC::Cmd has been upgraded to 0.80.

	   Use "POSIX::_exit" instead of "exit" in "run_forked" [rt.cpan.org
	   #76901].

       ·   IPC::Open3 has been upgraded to 1.13.

	   The "open3()" function no longer uses "POSIX::close()" to close
	   file descriptors since that breaks the ref-counting of file
	   descriptors done by PerlIO in cases where the file descriptors are
	   shared by PerlIO streams, leading to attempts to close the file
	   descriptors a second time when any such PerlIO streams are closed
	   later on.

       ·   Locale::Codes has been upgraded to 3.25.

	   It includes some new codes.

       ·   Memoize has been upgraded to 1.03.

	   Fix the "MERGE" cache option.

       ·   Module::Build has been upgraded to 0.4003.

	   Fixed bug where modules without $VERSION might have a version of
	   '0' listed in 'provides' metadata, which will be rejected by PAUSE.

	   Fixed bug in PodParser to allow numerals in module names.

	   Fixed bug where giving arguments twice led to them becoming arrays,
	   resulting in install paths like ARRAY(0xdeadbeef)/lib/Foo.pm.

	   A minor bug fix allows markup to be used around the leading "Name"
	   in a POD "abstract" line, and some documentation improvements have
	   been made.

       ·   Module::CoreList has been upgraded to 2.90

	   Version information is now stored as a delta, which greatly reduces
	   the size of the CoreList.pm file.

	   This restores compatibility with older versions of perl and cleans
	   up the corelist data for various modules.

       ·   Module::Load::Conditional has been upgraded to 0.54.

	   Fix use of "requires" on perls installed to a path with spaces.

	   Various enhancements include the new use of Module::Metadata.

       ·   Module::Metadata has been upgraded to 1.000011.

	   The creation of a Module::Metadata object for a typical module file
	   has been sped up by about 40%, and some spurious warnings about
	   $VERSIONs have been suppressed.

       ·   Module::Pluggable has been upgraded to 4.7.

	   Amongst other changes, triggers are now allowed on events, which
	   gives a powerful way to modify behaviour.

       ·   Net::Ping has been upgraded to 2.41.

	   This fixes some test failures on Windows.

       ·   Opcode has been upgraded to 1.25.

	   Reflect the removal of the boolkeys opcode and the addition of the
	   clonecv, introcv and padcv opcodes.

       ·   overload has been upgraded to 1.22.

	   "no overload" now warns for invalid arguments, just like "use
	   overload".

       ·   PerlIO::encoding has been upgraded to 0.16.

	   This is the module implementing the ":encoding(...)" I/O layer.  It
	   no longer corrupts memory or crashes when the encoding back-end
	   reallocates the buffer or gives it a typeglob or shared hash key
	   scalar.

       ·   PerlIO::scalar has been upgraded to 0.16.

	   The buffer scalar supplied may now only contain code pounts 0xFF or
	   lower. [perl #109828]

       ·   Perl::OSType has been upgraded to 1.003.

	   This fixes a bug detecting the VOS operating system.

       ·   Pod::Html has been upgraded to 1.18.

	   The option "--libpods" has been reinstated. It is deprecated, and
	   its use does nothing other than issue a warning that it is no
	   longer supported.

	   Since the HTML files generated by pod2html claim to have a UTF-8
	   charset, actually write the files out using UTF-8 [perl #111446].

       ·   Pod::Simple has been upgraded to 3.28.

	   Numerous improvements have been made, mostly to Pod::Simple::XHTML,
	   which also has a compatibility change: the "codes_in_verbatim"
	   option is now disabled by default.  See cpan/Pod-Simple/ChangeLog
	   for the full details.

       ·   re has been upgraded to 0.23

	   Single character [class]es like "/[s]/" or "/[s]/i" are now
	   optimized as if they did not have the brackets, i.e. "/s/" or
	   "/s/i".

	   See note about "op_comp" in the "Internal Changes" section below.

       ·   Safe has been upgraded to 2.35.

	   Fix interactions with "Devel::Cover".

	   Don't eval code under "no strict".

       ·   Scalar::Util has been upgraded to version 1.27.

	   Fix an overloading issue with "sum".

	   "first" and "reduce" now check the callback first (so &first(1) is
	   disallowed).

	   Fix "tainted" on magical values [rt.cpan.org #55763].

	   Fix "sum" on previously magical values [rt.cpan.org #61118].

	   Fix reading past the end of a fixed buffer [rt.cpan.org #72700].

       ·   Search::Dict has been upgraded to 1.07.

	   No longer require "stat" on filehandles.

	   Use "fc" for casefolding.

       ·   Socket has been upgraded to 2.009.

	   Constants and functions required for IP multicast source group
	   membership have been added.

	   "unpack_sockaddr_in()" and "unpack_sockaddr_in6()" now return just
	   the IP address in scalar context, and "inet_ntop()" now guards
	   against incorrect length scalars being passed in.

	   This fixes an uninitialized memory read.

       ·   Storable has been upgraded to 2.41.

	   Modifying $_[0] within "STORABLE_freeze" no longer results in
	   crashes [perl #112358].

	   An object whose class implements "STORABLE_attach" is now thawed
	   only once when there are multiple references to it in the structure
	   being thawed [perl #111918].

	   Restricted hashes were not always thawed correctly [perl #73972].

	   Storable would croak when freezing a blessed REF object with a
	   "STORABLE_freeze()" method [perl #113880].

	   It can now freeze and thaw vstrings correctly.  This causes a
	   slight incompatible change in the storage format, so the format
	   version has increased to 2.9.

	   This contains various bugfixes, including compatibility fixes for
	   older versions of Perl and vstring handling.

       ·   Sys::Syslog has been upgraded to 0.32.

	   This contains several bug fixes relating to "getservbyname()",
	   "setlogsock()"and log levels in "syslog()", together with fixes for
	   Windows, Haiku-OS and GNU/kFreeBSD.	See cpan/Sys-Syslog/Changes
	   for the full details.

       ·   Term::ANSIColor has been upgraded to 4.02.

	   Add support for italics.

	   Improve error handling.

       ·   Term::ReadLine has been upgraded to 1.10.  This fixes the use of
	   the cpan and cpanp shells on Windows in the event that the current
	   drive happens to contain a \dev\tty file.

       ·   Test::Harness has been upgraded to 3.26.

	   Fix glob semantics on Win32 [rt.cpan.org #49732].

	   Don't use "Win32::GetShortPathName" when calling perl [rt.cpan.org
	   #47890].

	   Ignore -T when reading shebang [rt.cpan.org #64404].

	   Handle the case where we don't know the wait status of the test
	   more gracefully.

	   Make the test summary 'ok' line overridable so that it can be
	   changed to a plugin to make the output of prove idempotent.

	   Don't run world-writable files.

       ·   Text::Tabs and Text::Wrap have been upgraded to 2012.0818.  Support
	   for Unicode combining characters has been added to them both.

       ·   threads::shared has been upgraded to 1.31.

	   This adds the option to warn about or ignore attempts to clone
	   structures that can't be cloned, as opposed to just unconditionally
	   dying in that case.

	   This adds support for dual-valued values as created by
	   Scalar::Util::dualvar.

       ·   Tie::StdHandle has been upgraded to 4.3.

	   "READ" now respects the offset argument to "read" [perl #112826].

       ·   Time::Local has been upgraded to 1.2300.

	   Seconds values greater than 59 but less than 60 no longer cause
	   "timegm()" and "timelocal()" to croak.

       ·   Unicode::UCD has been upgraded to 0.53.

	   This adds a function all_casefolds() that returns all the
	   casefolds.

       ·   Win32 has been upgraded to 0.47.

	   New APIs have been added for getting and setting the current code
	   page.

   Removed Modules and Pragmata
       ·   Version::Requirements has been removed from the core distribution.
	   It is available under a different name: CPAN::Meta::Requirements.

Documentation
   Changes to Existing Documentation
       perlcheat

       ·   perlcheat has been reorganized, and a few new sections were added.

       perldata

       ·   Now explicitly documents the behaviour of hash initializer lists
	   that contain duplicate keys.

       perldiag

       ·   The explanation of symbolic references being prevented by "strict
	   refs" now doesn't assume that the reader knows what symbolic
	   references are.

       perlfaq

       ·   perlfaq has been synchronized with version 5.0150040 from CPAN.

       perlfunc

       ·   The return value of "pipe" is now documented.

       ·   Clarified documentation of "our".

       perlop

       ·   Loop control verbs ("dump", "goto", "next", "last" and "redo") have
	   always had the same precedence as assignment operators, but this
	   was not documented until now.

       Diagnostics

       The following additions or changes have been made to diagnostic output,
       including warnings and fatal error messages.  For the complete list of
       diagnostic messages, see perldiag.

   New Diagnostics
       New Errors

       ·   Unterminated delimiter for here document

	   This message now occurs when a here document label has an initial
	   quotation mark but the final quotation mark is missing.

	   This replaces a bogus and misleading error message about not
	   finding the label itself [perl #114104].

       ·   panic: child pseudo-process was never scheduled

	   This error is thrown when a child pseudo-process in the ithreads
	   implementation on Windows was not scheduled within the time period
	   allowed and therefore was not able to initialize properly [perl
	   #88840].

       ·   Group name must start with a non-digit word character in regex;
	   marked by <-- HERE in m/%s/

	   This error has been added for "(?&0)", which is invalid.  It used
	   to produce an incomprehensible error message [perl #101666].

       ·   Can't use an undefined value as a subroutine reference

	   Calling an undefined value as a subroutine now produces this error
	   message.  It used to, but was accidentally disabled, first in Perl
	   5.004 for non-magical variables, and then in Perl v5.14 for magical
	   (e.g., tied) variables.  It has now been restored.  In the mean
	   time, undef was treated as an empty string [perl #113576].

       ·   Experimental "%s" subs not enabled

	   To use lexical subs, you must first enable them:

	       no warnings 'experimental::lexical_subs';
	       use feature 'lexical_subs';
	       my sub foo { ... }

       New Warnings

       ·   'Strings with code points over 0xFF may not be mapped into in-
	   memory file handles'

       ·   '%s' resolved to '\o{%s}%d'

       ·   'Trailing white-space in a charnames alias definition is
	   deprecated'

       ·   'A sequence of multiple spaces in a charnames alias definition is
	   deprecated'

       ·   'Passing malformed UTF-8 to "%s" is deprecated'

       ·   Subroutine "&%s" is not available

	   (W closure) During compilation, an inner named subroutine or eval
	   is attempting to capture an outer lexical subroutine that is not
	   currently available.	 This can happen for one of two reasons.
	   First, the lexical subroutine may be declared in an outer anonymous
	   subroutine that has not yet been created.  (Remember that named
	   subs are created at compile time, while anonymous subs are created
	   at run-time.)  For example,

	       sub { my sub a {...} sub f { \&a } }

	   At the time that f is created, it can't capture the current the "a"
	   sub, since the anonymous subroutine hasn't been created yet.
	   Conversely, the following won't give a warning since the anonymous
	   subroutine has by now been created and is live:

	       sub { my sub a {...} eval 'sub f { \&a }' }->();

	   The second situation is caused by an eval accessing a variable that
	   has gone out of scope, for example,

	       sub f {
		   my sub a {...}
		   sub { eval '\&a' }
	       }
	       f()->();

	   Here, when the '\&a' in the eval is being compiled, f() is not
	   currently being executed, so its &a is not available for capture.

       ·   "%s" subroutine &%s masks earlier declaration in same %s

	   (W misc) A "my" or "state" subroutine has been redeclared in the
	   current scope or statement, effectively eliminating all access to
	   the previous instance.  This is almost always a typographical
	   error.  Note that the earlier subroutine will still exist until the
	   end of the scope or until all closure references to it are
	   destroyed.

       ·   The %s feature is experimental

	   (S experimental) This warning is emitted if you enable an
	   experimental feature via "use feature".  Simply suppress the
	   warning if you want to use the feature, but know that in doing so
	   you are taking the risk of using an experimental feature which may
	   change or be removed in a future Perl version:

	       no warnings "experimental::lexical_subs";
	       use feature "lexical_subs";

       ·   sleep(%u) too large

	   (W overflow) You called "sleep" with a number that was larger than
	   it can reliably handle and "sleep" probably slept for less time
	   than requested.

       ·   Wide character in setenv

	   Attempts to put wide characters into environment variables via %ENV
	   now provoke this warning.

       ·   "Invalid negative number (%s) in chr"

	   "chr()" now warns when passed a negative value [perl #83048].

       ·   "Integer overflow in srand"

	   "srand()" now warns when passed a value that doesn't fit in a "UV"
	   (since the value will be truncated rather than overflowing) [perl
	   #40605].

       ·   "-i used with no filenames on the command line, reading from STDIN"

	   Running perl with the "-i" flag now warns if no input files are
	   provided on the command line [perl #113410].

   Changes to Existing Diagnostics
       ·   $* is no longer supported

	   The warning that use of $* and $# is no longer supported is now
	   generated for every location that references them.  Previously it
	   would fail to be generated if another variable using the same
	   typeglob was seen first (e.g. "@*" before $*), and would not be
	   generated for the second and subsequent uses.  (It's hard to fix
	   the failure to generate warnings at all without also generating
	   them every time, and warning every time is consistent with the
	   warnings that $[ used to generate.)

       ·   The warnings for "\b{" and "\B{" were added.	 They are a
	   deprecation warning which should be turned off by that category.
	   One should not have to turn off regular regexp warnings as well to
	   get rid of these.

       ·   Constant(%s): Call to &{$^H{%s}} did not return a defined value

	   Constant overloading that returns "undef" results in this error
	   message.  For numeric constants, it used to say "Constant(undef)".
	   "undef" has been replaced with the number itself.

       ·   The error produced when a module cannot be loaded now includes a
	   hint that the module may need to be installed: "Can't locate
	   hopping.pm in @INC (you may need to install the hopping module)
	   (@INC contains: ...)"

       ·   vector argument not supported with alpha versions

	   This warning was not suppressable, even with "no warnings".	Now it
	   is suppressible, and has been moved from the "internal" category to
	   the "printf" category.

       ·   "Can't do {n,m} with n > m in regex; marked by <-- HERE in m/%s/"

	   This fatal error has been turned into a warning that reads:

	   Quantifier {n,m} with n > m can't match in regex

	   (W regexp) Minima should be less than or equal to maxima.  If you
	   really want your regexp to match something 0 times, just put {0}.

       ·   The "Runaway prototype" warning that occurs in bizarre cases has
	   been removed as being unhelpful and inconsistent.

       ·   The "Not a format reference" error has been removed, as the only
	   case in which it could be triggered was a bug.

       ·   The "Unable to create sub named %s" error has been removed for the
	   same reason.

       ·   The 'Can't use "my %s" in sort comparison' error has been
	   downgraded to a warning, '"my %s" used in sort comparison' (with
	   'state' instead of 'my' for state variables).  In addition, the
	   heuristics for guessing whether lexical $a or $b has been misused
	   have been improved to generate fewer false positives.  Lexical $a
	   and $b are no longer disallowed if they are outside the sort block.
	   Also, a named unary or list operator inside the sort block no
	   longer causes the $a or $b to be ignored [perl #86136].

Utility Changes
       h2xs

       ·   h2xs no longer produces invalid code for empty defines.  [perl
	   #20636]

Configuration and Compilation
       ·   Added "useversionedarchname" option to Configure

	   When set, it includes 'api_versionstring' in 'archname'. E.g.
	   x86_64-linux-5.13.6-thread-multi.  It is unset by default.

	   This feature was requested by Tim Bunce, who observed that
	   "INSTALL_BASE" creates a library structure that does not
	   differentiate by perl version.  Instead, it places architecture
	   specific files in "$install_base/lib/perl5/$archname".  This makes
	   it difficult to use a common "INSTALL_BASE" library path with
	   multiple versions of perl.

	   By setting "-Duseversionedarchname", the $archname will be distinct
	   for architecture and API version, allowing mixed use of
	   "INSTALL_BASE".

       ·   Add a "PERL_NO_INLINE_FUNCTIONS" option

	   If "PERL_NO_INLINE_FUNCTIONS" is defined, don't include "inline.h"

	   This permits test code to include the perl headers for definitions
	   without creating a link dependency on the perl library (which may
	   not exist yet).

       ·   Configure will honour the external "MAILDOMAIN" environment
	   variable, if set.

       ·   "installman" no longer ignores the silent option

       ·   Both "META.yml" and "META.json" files are now included in the
	   distribution.

       ·   Configure will now correctly detect "isblank()" when compiling with
	   a C++ compiler.

       ·   The pager detection in Configure has been improved to allow
	   responses which specify options after the program name, e.g.
	   /usr/bin/less -R, if the user accepts the default value.  This
	   helps perldoc when handling ANSI escapes [perl #72156].

Testing
       ·   The test suite now has a section for tests that require very large
	   amounts of memory.  These tests won't run by default; they can be
	   enabled by setting the "PERL_TEST_MEMORY" environment variable to
	   the number of gibibytes of memory that may be safely used.

Platform Support
   Discontinued Platforms
       BeOS
	   BeOS was an operating system for personal computers developed by Be
	   Inc, initially for their BeBox hardware. The OS Haiku was written
	   as an open source replacement for/continuation of BeOS, and its
	   perl port is current and actively maintained.

       UTS Global
	   Support code relating to UTS global has been removed.  UTS was a
	   mainframe version of System V created by Amdahl, subsequently sold
	   to UTS Global.  The port has not been touched since before Perl
	   v5.8.0, and UTS Global is now defunct.

       VM/ESA
	   Support for VM/ESA has been removed. The port was tested on 2.3.0,
	   which IBM ended service on in March 2002. 2.4.0 ended service in
	   June 2003, and was superseded by Z/VM. The current version of Z/VM
	   is V6.2.0, and scheduled for end of service on 2015/04/30.

       MPE/IX
	   Support for MPE/IX has been removed.

       EPOC
	   Support code relating to EPOC has been removed.  EPOC was a family
	   of operating systems developed by Psion for mobile devices.	It was
	   the predecessor of Symbian.	The port was last updated in April
	   2002.

       Rhapsody
	   Support for Rhapsody has been removed.

   Platform-Specific Notes
       AIX

       Configure now always adds "-qlanglvl=extc99" to the CC flags on AIX
       when using xlC.	This will make it easier to compile a number of XS-
       based modules that assume C99 [perl #113778].

       clang++

       There is now a workaround for a compiler bug that prevented compiling
       with clang++ since Perl v5.15.7 [perl #112786].

       C++

       When compiling the Perl core as C++ (which is only semi-supported), the
       mathom functions are now compiled as "extern "C"", to ensure proper
       binary compatibility.  (However, binary compatibility isn't generally
       guaranteed anyway in the situations where this would matter.)

       Darwin

       Stop hardcoding an alignment on 8 byte boundaries to fix builds using
       -Dusemorebits.

       Haiku

       Perl should now work out of the box on Haiku R1 Alpha 4.

       MidnightBSD

       "libc_r" was removed from recent versions of MidnightBSD and older
       versions work better with "pthread". Threading is now enabled using
       "pthread" which corrects build errors with threading enabled on
       0.4-CURRENT.

       Solaris

       In Configure, avoid running sed commands with flags not supported on
       Solaris.

       VMS

       ·   Where possible, the case of filenames and command-line arguments is
	   now preserved by enabling the CRTL features
	   "DECC$EFS_CASE_PRESERVE" and "DECC$ARGV_PARSE_STYLE" at start-up
	   time.  The latter only takes effect when extended parse is enabled
	   in the process from which Perl is run.

       ·   The character set for Extended Filename Syntax (EFS) is now enabled
	   by default on VMS.  Among other things, this provides better
	   handling of dots in directory names, multiple dots in filenames,
	   and spaces in filenames.  To obtain the old behavior, set the
	   logical name "DECC$EFS_CHARSET" to "DISABLE".

       ·   Fixed linking on builds configured with "-Dusemymalloc=y".

       ·   Experimental support for building Perl with the HP C++ compiler is
	   available by configuring with "-Dusecxx".

       ·   All C header files from the top-level directory of the distribution
	   are now installed on VMS, providing consistency with a long-
	   standing practice on other platforms. Previously only a subset were
	   installed, which broke non-core extension builds for extensions
	   that depended on the missing include files.

       ·   Quotes are now removed from the command verb (but not the
	   parameters) for commands spawned via "system", backticks, or a
	   piped "open".  Previously, quotes on the verb were passed through
	   to DCL, which would fail to recognize the command.  Also, if the
	   verb is actually a path to an image or command procedure on an
	   ODS-5 volume, quoting it now allows the path to contain spaces.

       ·   The a2p build has been fixed for the HP C++ compiler on OpenVMS.

       Win32

       ·   Perl can now be built using Microsoft's Visual C++ 2012 compiler by
	   specifying CCTYPE=MSVC110 (or MSVC110FREE if you are using the free
	   Express edition for Windows Desktop) in win32/Makefile.

       ·   The option to build without "USE_SOCKETS_AS_HANDLES" has been
	   removed.

       ·   Fixed a problem where perl could crash while cleaning up threads
	   (including the main thread) in threaded debugging builds on Win32
	   and possibly other platforms [perl #114496].

       ·   A rare race condition that would lead to sleep taking more time
	   than requested, and possibly even hanging, has been fixed [perl
	   #33096].

       ·   "link" on Win32 now attempts to set $! to more appropriate values
	   based on the Win32 API error code. [perl #112272]

	   Perl no longer mangles the environment block, e.g. when launching a
	   new sub-process, when the environment contains non-ASCII
	   characters. Known problems still remain, however, when the
	   environment contains characters outside of the current ANSI
	   codepage (e.g. see the item about Unicode in %ENV in
	   <http://perl5.git.perl.org/perl.git/blob/HEAD:/Porting/todo.pod>).
	   [perl #113536]

       ·   Building perl with some Windows compilers used to fail due to a
	   problem with miniperl's "glob" operator (which uses the "perlglob"
	   program) deleting the PATH environment variable [perl #113798].

       ·   A new makefile option, "USE_64_BIT_INT", has been added to the
	   Windows makefiles.  Set this to "define" when building a 32-bit
	   perl if you want it to use 64-bit integers.

	   Machine code size reductions, already made to the DLLs of XS
	   modules in Perl v5.17.2, have now been extended to the perl DLL
	   itself.

	   Building with VC++ 6.0 was inadvertently broken in Perl v5.17.2 but
	   has now been fixed again.

       WinCE

       Building on WinCE is now possible once again, although more work is
       required to fully restore a clean build.

Internal Changes
       ·   Synonyms for the misleadingly named "av_len()" have been created:
	   "av_top_index()" and "av_tindex".  All three of these return the
	   number of the highest index in the array, not the number of
	   elements it contains.

       ·   SvUPGRADE() is no longer an expression. Originally this macro (and
	   its underlying function, sv_upgrade()) were documented as boolean,
	   although in reality they always croaked on error and never returned
	   false. In 2005 the documentation was updated to specify a void
	   return value, but SvUPGRADE() was left always returning 1 for
	   backwards compatibility. This has now been removed, and SvUPGRADE()
	   is now a statement with no return value.

	   So this is now a syntax error:

	       if (!SvUPGRADE(sv)) { croak(...); }

	   If you have code like that, simply replace it with

	       SvUPGRADE(sv);

	   or to avoid compiler warnings with older perls, possibly

	       (void)SvUPGRADE(sv);

       ·   Perl has a new copy-on-write mechanism that allows any SvPOK scalar
	   to be upgraded to a copy-on-write scalar.  A reference count on the
	   string buffer is stored in the string buffer itself.	 This feature
	   is not enabled by default.

	   It can be enabled in a perl build by running Configure with
	   -Accflags=-DPERL_NEW_COPY_ON_WRITE, and we would encourage XS
	   authors to try their code with such an enabled perl, and provide
	   feedback.  Unfortunately, there is not yet a good guide to updating
	   XS code to cope with COW.  Until such a document is available,
	   consult the perl5-porters mailing list.

	   It breaks a few XS modules by allowing copy-on-write scalars to go
	   through code paths that never encountered them before.

       ·   Copy-on-write no longer uses the SvFAKE and SvREADONLY flags.
	   Hence, SvREADONLY indicates a true read-only SV.

	   Use the SvIsCOW macro (as before) to identify a copy-on-write
	   scalar.

       ·   "PL_glob_index" is gone.

       ·   The private Perl_croak_no_modify has had its context parameter
	   removed.  It is now has a void prototype.  Users of the public API
	   croak_no_modify remain unaffected.

       ·   Copy-on-write (shared hash key) scalars are no longer marked read-
	   only.  "SvREADONLY" returns false on such an SV, but "SvIsCOW"
	   still returns true.

       ·   A new op type, "OP_PADRANGE" has been introduced.  The perl
	   peephole optimiser will, where possible, substitute a single
	   padrange op for a pushmark followed by one or more pad ops, and
	   possibly also skipping list and nextstate ops.  In addition, the op
	   can carry out the tasks associated with the RHS of a "my(...) = @_"
	   assignment, so those ops may be optimised away too.

       ·   Case-insensitive matching inside a [bracketed] character class with
	   a multi-character fold no longer excludes one of the possibilities
	   in the circumstances that it used to. [perl #89774].

       ·   "PL_formfeed" has been removed.

       ·   The regular expression engine no longer reads one byte past the end
	   of the target string.  While for all internally well-formed scalars
	   this should never have been a problem, this change facilitates
	   clever tricks with string buffers in CPAN modules.  [perl #73542]

       ·   Inside a BEGIN block, "PL_compcv" now points to the currently-
	   compiling subroutine, rather than the BEGIN block itself.

       ·   "mg_length" has been deprecated.

       ·   "sv_len" now always returns a byte count and "sv_len_utf8" a
	   character count.  Previously, "sv_len" and "sv_len_utf8" were both
	   buggy and would sometimes returns bytes and sometimes characters.
	   "sv_len_utf8" no longer assumes that its argument is in UTF-8.
	   Neither of these creates UTF-8 caches for tied or overloaded values
	   or for non-PVs any more.

       ·   "sv_mortalcopy" now copies string buffers of shared hash key
	   scalars when called from XS modules [perl #79824].

       ·   "RXf_SPLIT" and "RXf_SKIPWHITE" are no longer used.	They are now
	   #defined as 0.

       ·   The new "RXf_MODIFIES_VARS" flag can be set by custom regular
	   expression engines to indicate that the execution of the regular
	   expression may cause variables to be modified.  This lets "s///"
	   know to skip certain optimisations.	Perl's own regular expression
	   engine sets this flag for the special backtracking verbs that set
	   $REGMARK and $REGERROR.

       ·   The APIs for accessing lexical pads have changed considerably.

	   "PADLIST"s are now longer "AV"s, but their own type instead.
	   "PADLIST"s now contain a "PAD" and a "PADNAMELIST" of "PADNAME"s,
	   rather than "AV"s for the pad and the list of pad names.  "PAD"s,
	   "PADNAMELIST"s, and "PADNAME"s are to be accessed as such through
	   the newly added pad API instead of the plain "AV" and "SV" APIs.
	   See perlapi for details.

       ·   In the regex API, the numbered capture callbacks are passed an
	   index indicating what match variable is being accessed. There are
	   special index values for the "$`, $&, $&" variables. Previously the
	   same three values were used to retrieve "${^PREMATCH}, ${^MATCH},
	   ${^POSTMATCH}" too, but these have now been assigned three separate
	   values. See "Numbered capture callbacks" in perlreapi.

       ·   "PL_sawampersand" was previously a boolean indicating that any of
	   "$`, $&, $&" had been seen; it now contains three one-bit flags
	   indicating the presence of each of the variables individually.

       ·   The "CV *" typemap entry now supports "&{}" overloading and
	   typeglobs, just like "&{...}" [perl #96872].

       ·   The "SVf_AMAGIC" flag to indicate overloading is now on the stash,
	   not the object.  It is now set automatically whenever a method or
	   @ISA changes, so its meaning has changed, too.  It now means
	   "potentially overloaded".  When the overload table is calculated,
	   the flag is automatically turned off if there is no overloading, so
	   there should be no noticeable slowdown.

	   The staleness of the overload tables is now checked when overload
	   methods are invoked, rather than during "bless".

	   "A" magic is gone.  The changes to the handling of the "SVf_AMAGIC"
	   flag eliminate the need for it.

	   "PL_amagic_generation" has been removed as no longer necessary.
	   For XS modules, it is now a macro alias to "PL_na".

	   The fallback overload setting is now stored in a stash entry
	   separate from overloadedness itself.

       ·   The character-processing code has been cleaned up in places.	 The
	   changes should be operationally invisible.

       ·   The "study" function was made a no-op in v5.16.  It was simply
	   disabled via a "return" statement; the code was left in place.  Now
	   the code supporting what "study" used to do has been removed.

       ·   Under threaded perls, there is no longer a separate PV allocated
	   for every COP to store its package name ("cop->stashpv").  Instead,
	   there is an offset ("cop->stashoff") into the new "PL_stashpad"
	   array, which holds stash pointers.

       ·   In the pluggable regex API, the "regexp_engine" struct has acquired
	   a new field "op_comp", which is currently just for perl's internal
	   use, and should be initialized to NULL by other regex plugin
	   modules.

       ·   A new function "alloccopstash" has been added to the API, but is
	   considered experimental.  See perlapi.

       ·   Perl used to implement get magic in a way that would sometimes hide
	   bugs in code that could call mg_get() too many times on magical
	   values.  This hiding of errors no longer occurs, so long-standing
	   bugs may become visible now.	 If you see magic-related errors in XS
	   code, check to make sure it, together with the Perl API functions
	   it uses, calls mg_get() only once on SvGMAGICAL() values.

       ·   OP allocation for CVs now uses a slab allocator.  This simplifies
	   memory management for OPs allocated to a CV, so cleaning up after a
	   compilation error is simpler and safer [perl #111462][perl
	   #112312].

       ·   "PERL_DEBUG_READONLY_OPS" has been rewritten to work with the new
	   slab allocator, allowing it to catch more violations than before.

       ·   The old slab allocator for ops, which was only enabled for
	   "PERL_IMPLICIT_SYS" and "PERL_DEBUG_READONLY_OPS", has been
	   retired.

Selected Bug Fixes
       ·   Here document terminators no longer require a terminating newline
	   character when they occur at the end of a file.  This was already
	   the case at the end of a string eval [perl #65838].

       ·   "-DPERL_GLOBAL_STRUCT" builds now free the global struct after
	   they've finished using it.

       ·   A trailing '/' on a path in @INC will no longer have an additional
	   '/' appended.

       ·   The ":crlf" layer now works when unread data doesn't fit into its
	   own buffer. [perl #112244].

       ·   "ungetc()" now handles UTF-8 encoded data. [perl #116322].

       ·   A bug in the core typemap caused any C types that map to the T_BOOL
	   core typemap entry to not be set, updated, or modified when the
	   T_BOOL variable was used in an OUTPUT: section with an exception
	   for RETVAL. T_BOOL in an INPUT: section was not affected. Using a
	   T_BOOL return type for an XSUB (RETVAL) was not affected. A side
	   effect of fixing this bug is, if a T_BOOL is specified in the
	   OUTPUT: section (which previous did nothing to the SV), and a read
	   only SV (literal) is passed to the XSUB, croaks like "Modification
	   of a read-only value attempted" will happen. [perl #115796]

       ·   On many platforms, providing a directory name as the script name
	   caused perl to do nothing and report success.  It should now
	   universally report an error and exit nonzero. [perl #61362]

       ·   "sort {undef} ..." under fatal warnings no longer crashes.  It had
	   begun crashing in Perl v5.16.

       ·   Stashes blessed into each other ("bless \%Foo::, 'Bar'; bless
	   \%Bar::, 'Foo'") no longer result in double frees.  This bug
	   started happening in Perl v5.16.

       ·   Numerous memory leaks have been fixed, mostly involving fatal
	   warnings and syntax errors.

       ·   Some failed regular expression matches such as "'f' =~ /../g" were
	   not resetting "pos".	 Also, "match-once" patterns ("m?...?g")
	   failed to reset it, too, when invoked a second time [perl #23180].

       ·   Several bugs involving "local *ISA" and "local *Foo::" causing
	   stale MRO caches have been fixed.

       ·   Defining a subroutine when its typeglob has been aliased no longer
	   results in stale method caches.  This bug was introduced in Perl
	   v5.10.

       ·   Localising a typeglob containing a subroutine when the typeglob's
	   package has been deleted from its parent stash no longer produces
	   an error.  This bug was introduced in Perl v5.14.

       ·   Under some circumstances, "local *method=..." would fail to reset
	   method caches upon scope exit.

       ·   "/[.foo.]/" is no longer an error, but produces a warning (as
	   before) and is treated as "/[.fo]/" [perl #115818].

       ·   "goto $tied_var" now calls FETCH before deciding what type of goto
	   (subroutine or label) this is.

       ·   Renaming packages through glob assignment ("*Foo:: = *Bar::; *Bar::
	   = *Baz::") in combination with "m?...?" and "reset" no longer makes
	   threaded builds crash.

       ·   A number of bugs related to assigning a list to hash have been
	   fixed. Many of these involve lists with repeated keys like "(1, 1,
	   1, 1)".

	   ·   The expression "scalar(%h = (1, 1, 1, 1))" now returns 4, not
	       2.

	   ·   The return value of "%h = (1, 1, 1)" in list context was wrong.
	       Previously this would return "(1, undef, 1)", now it returns
	       "(1, undef)".

	   ·   Perl now issues the same warning on "($s, %h) = (1, {})" as it
	       does for "(%h) = ({})", "Reference found where even-sized list
	       expected".

	   ·   A number of additional edge cases in list assignment to hashes
	       were corrected. For more details see commit 23b7025ebc.

       ·   Attributes applied to lexical variables no longer leak memory.
	   [perl #114764]

       ·   "dump", "goto", "last", "next", "redo" or "require" followed by a
	   bareword (or version) and then an infix operator is no longer a
	   syntax error.  It used to be for those infix operators (like "+")
	   that have a different meaning where a term is expected.  [perl
	   #105924]

       ·   "require a::b . 1" and "require a::b + 1" no longer produce
	   erroneous ambiguity warnings.  [perl #107002]

       ·   Class method calls are now allowed on any string, and not just
	   strings beginning with an alphanumeric character.  [perl #105922]

       ·   An empty pattern created with "qr//" used in "m///" no longer
	   triggers the "empty pattern reuses last pattern" behaviour.	[perl
	   #96230]

       ·   Tying a hash during iteration no longer results in a memory leak.

       ·   Freeing a tied hash during iteration no longer results in a memory
	   leak.

       ·   List assignment to a tied array or hash that dies on STORE no
	   longer results in a memory leak.

       ·   If the hint hash ("%^H") is tied, compile-time scope entry (which
	   copies the hint hash) no longer leaks memory if FETCH dies.	[perl
	   #107000]

       ·   Constant folding no longer inappropriately triggers the special
	   "split " "" behaviour.  [perl #94490]

       ·   "defined scalar(@array)", "defined do { &foo }", and similar
	   constructs now treat the argument to "defined" as a simple scalar.
	   [perl #97466]

       ·   Running a custom debugging that defines no *DB::DB glob or provides
	   a subroutine stub for &DB::DB no longer results in a crash, but an
	   error instead.  [perl #114990]

       ·   "reset """ now matches its documentation.  "reset" only resets
	   "m?...?"  patterns when called with no argument.  An empty string
	   for an argument now does nothing.  (It used to be treated as no
	   argument.)  [perl #97958]

       ·   "printf" with an argument returning an empty list no longer reads
	   past the end of the stack, resulting in erratic behaviour.  [perl
	   #77094]

       ·   "--subname" no longer produces erroneous ambiguity warnings.	 [perl
	   #77240]

       ·   "v10" is now allowed as a label or package name.  This was
	   inadvertently broken when v-strings were added in Perl v5.6.	 [perl
	   #56880]

       ·   "length", "pos", "substr" and "sprintf" could be confused by ties,
	   overloading, references and typeglobs if the stringification of
	   such changed the internal representation to or from UTF-8.  [perl
	   #114410]

       ·   utf8::encode now calls FETCH and STORE on tied variables.
	   utf8::decode now calls STORE (it was already calling FETCH).

       ·   "$tied =~ s/$non_utf8/$utf8/" no longer loops infinitely if the
	   tied variable returns a Latin-1 string, shared hash key scalar, or
	   reference or typeglob that stringifies as ASCII or Latin-1.	This
	   was a regression from v5.12.

       ·   "s///" without /e is now better at detecting when it needs to
	   forego certain optimisations, fixing some buggy cases:

	   ·   Match variables in certain constructs ("&&", "||", ".." and
	       others) in the replacement part; e.g., "s/(.)/$l{$a||$1}/g".
	       [perl #26986]

	   ·   Aliases to match variables in the replacement.

	   ·   $REGERROR or $REGMARK in the replacement.  [perl #49190]

	   ·   An empty pattern ("s//$foo/") that causes the last-successful
	       pattern to be used, when that pattern contains code blocks that
	       modify the variables in the replacement.

       ·   The taintedness of the replacement string no longer affects the
	   taintedness of the return value of "s///e".

       ·   The $| autoflush variable is created on-the-fly when needed.	 If
	   this happened (e.g., if it was mentioned in a module or eval) when
	   the currently-selected filehandle was a typeglob with an empty IO
	   slot, it used to crash.  [perl #115206]

       ·   Line numbers at the end of a string eval are no longer off by one.
	   [perl #114658]

       ·   @INC filters (subroutines returned by subroutines in @INC) that set
	   $_ to a copy-on-write scalar no longer cause the parser to modify
	   that string buffer in place.

       ·   "length($object)" no longer returns the undefined value if the
	   object has string overloading that returns undef.  [perl #115260]

       ·   The use of "PL_stashcache", the stash name lookup cache for method
	   calls, has been restored,

	   Commit da6b625f78f5f133 in August 2011 inadvertently broke the code
	   that looks up values in "PL_stashcache". As it's a only cache,
	   quite correctly everything carried on working without it.

       ·   The error "Can't localize through a reference" had disappeared in
	   v5.16.0 when "local %$ref" appeared on the last line of an lvalue
	   subroutine.	This error disappeared for "\local %$ref" in perl
	   v5.8.1.  It has now been restored.

       ·   The parsing of here-docs has been improved significantly, fixing
	   several parsing bugs and crashes and one memory leak, and
	   correcting wrong subsequent line numbers under certain conditions.

       ·   Inside an eval, the error message for an unterminated here-doc no
	   longer has a newline in the middle of it [perl #70836].

       ·   A substitution inside a substitution pattern ("s/${s|||}//") no
	   longer confuses the parser.

       ·   It may be an odd place to allow comments, but "s//"" # hello/e" has
	   always worked, unless there happens to be a null character before
	   the first #.	 Now it works even in the presence of nulls.

       ·   An invalid range in "tr///" or "y///" no longer results in a memory
	   leak.

       ·   String eval no longer treats a semicolon-delimited quote-like
	   operator at the very end ("eval 'q;;'") as a syntax error.

       ·   "warn {$_ => 1} + 1" is no longer a syntax error.  The parser used
	   to get confused with certain list operators followed by an
	   anonymous hash and then an infix operator that shares its form with
	   a unary operator.

       ·   "(caller $n)[6]" (which gives the text of the eval) used to return
	   the actual parser buffer.  Modifying it could result in crashes.
	   Now it always returns a copy.  The string returned no longer has
	   "\n;" tacked on to the end.	The returned text also includes here-
	   doc bodies, which used to be omitted.

       ·   The UTF-8 position cache is now reset when accessing magical
	   variables, to avoid the string buffer and the UTF-8 position cache
	   getting out of sync [perl #114410].

       ·   Various cases of get magic being called twice for magical UTF-8
	   strings have been fixed.

       ·   This code (when not in the presence of $& etc)

	       $_ = 'x' x 1_000_000;
	       1 while /(.)/;

	   used to skip the buffer copy for performance reasons, but suffered
	   from $1 etc changing if the original string changed.	 That's now
	   been fixed.

       ·   Perl doesn't use PerlIO anymore to report out of memory messages,
	   as PerlIO might attempt to allocate more memory.

       ·   In a regular expression, if something is quantified with "{n,m}"
	   where "n > m", it can't possibly match.  Previously this was a
	   fatal error, but now is merely a warning (and that something won't
	   match).  [perl #82954].

       ·   It used to be possible for formats defined in subroutines that have
	   subsequently been undefined and redefined to close over variables
	   in the wrong pad (the newly-defined enclosing sub), resulting in
	   crashes or "Bizarre copy" errors.

       ·   Redefinition of XSUBs at run time could produce warnings with the
	   wrong line number.

       ·   The %vd sprintf format does not support version objects for alpha
	   versions.  It used to output the format itself (%vd) when passed an
	   alpha version, and also emit an "Invalid conversion in printf"
	   warning.  It no longer does, but produces the empty string in the
	   output.  It also no longer leaks memory in this case.

       ·   "$obj->SUPER::method" calls in the main package could fail if the
	   SUPER package had already been accessed by other means.

       ·   Stash aliasing ("*foo:: = *bar::") no longer causes SUPER calls to
	   ignore changes to methods or @ISA or use the wrong package.

       ·   Method calls on packages whose names end in ::SUPER are no longer
	   treated as SUPER method calls, resulting in failure to find the
	   method.  Furthermore, defining subroutines in such packages no
	   longer causes them to be found by SUPER method calls on the
	   containing package [perl #114924].

       ·   "\w" now matches the code points U+200C (ZERO WIDTH NON-JOINER) and
	   U+200D (ZERO WIDTH JOINER).	"\W" no longer matches these.  This
	   change is because Unicode corrected their definition of what "\w"
	   should match.

       ·   "dump LABEL" no longer leaks its label.

       ·   Constant folding no longer changes the behaviour of functions like
	   "stat()" and "truncate()" that can take either filenames or
	   handles.  "stat 1 ? foo : bar" nows treats its argument as a file
	   name (since it is an arbitrary expression), rather than the handle
	   "foo".

       ·   "truncate FOO, $len" no longer falls back to treating "FOO" as a
	   file name if the filehandle has been deleted.  This was broken in
	   Perl v5.16.0.

       ·   Subroutine redefinitions after sub-to-glob and glob-to-glob
	   assignments no longer cause double frees or panic messages.

       ·   "s///" now turns vstrings into plain strings when performing a
	   substitution, even if the resulting string is the same ("s/a/a/").

       ·   Prototype mismatch warnings no longer erroneously treat constant
	   subs as having no prototype when they actually have "".

       ·   Constant subroutines and forward declarations no longer prevent
	   prototype mismatch warnings from omitting the sub name.

       ·   "undef" on a subroutine now clears call checkers.

       ·   The "ref" operator started leaking memory on blessed objects in
	   Perl v5.16.0.  This has been fixed [perl #114340].

       ·   "use" no longer tries to parse its arguments as a statement, making
	   "use constant { () };" a syntax error [perl #114222].

       ·   On debugging builds, "uninitialized" warnings inside formats no
	   longer cause assertion failures.

       ·   On debugging builds, subroutines nested inside formats no longer
	   cause assertion failures [perl #78550].

       ·   Formats and "use" statements are now permitted inside formats.

       ·   "print $x" and "sub { print $x }->()" now always produce the same
	   output.  It was possible for the latter to refuse to close over $x
	   if the variable was not active; e.g., if it was defined outside a
	   currently-running named subroutine.

       ·   Similarly, "print $x" and "print eval '$x'" now produce the same
	   output.  This also allows "my $x if 0" variables to be seen in the
	   debugger [perl #114018].

       ·   Formats called recursively no longer stomp on their own lexical
	   variables, but each recursive call has its own set of lexicals.

       ·   Attempting to free an active format or the handle associated with
	   it no longer results in a crash.

       ·   Format parsing no longer gets confused by braces, semicolons and
	   low-precedence operators.  It used to be possible to use braces as
	   format delimiters (instead of "=" and "."), but only sometimes.
	   Semicolons and low-precedence operators in format argument lines no
	   longer confuse the parser into ignoring the line's return value.
	   In format argument lines, braces can now be used for anonymous
	   hashes, instead of being treated always as "do" blocks.

       ·   Formats can now be nested inside code blocks in regular expressions
	   and other quoted constructs ("/(?{...})/" and "qq/${...}/") [perl
	   #114040].

       ·   Formats are no longer created after compilation errors.

       ·   Under debugging builds, the -DA command line option started
	   crashing in Perl v5.16.0.  It has been fixed [perl #114368].

       ·   A potential deadlock scenario involving the premature termination
	   of a pseudo- forked child in a Windows build with ithreads enabled
	   has been fixed.  This resolves the common problem of the
	   t/op/fork.t test hanging on Windows [perl #88840].

       ·   The code which generates errors from "require()" could potentially
	   read one or two bytes before the start of the filename for
	   filenames less than three bytes long and ending "/\.p?\z/".	This
	   has now been fixed.	Note that it could never have happened with
	   module names given to "use()" or "require()" anyway.

       ·   The handling of pathnames of modules given to "require()" has been
	   made thread-safe on VMS.

       ·   Non-blocking sockets have been fixed on VMS.

       ·   Pod can now be nested in code inside a quoted construct outside of
	   a string eval.  This used to work only within string evals [perl
	   #114040].

       ·   "goto ''" now looks for an empty label, producing the "goto must
	   have label" error message, instead of exiting the program [perl
	   #111794].

       ·   "goto "\0"" now dies with "Can't find label" instead of "goto must
	   have label".

       ·   The C function "hv_store" used to result in crashes when used on
	   "%^H" [perl #111000].

       ·   A call checker attached to a closure prototype via
	   "cv_set_call_checker" is now copied to closures cloned from it.  So
	   "cv_set_call_checker" now works inside an attribute handler for a
	   closure.

       ·   Writing to $^N used to have no effect.  Now it croaks with
	   "Modification of a read-only value" by default, but that can be
	   overridden by a custom regular expression engine, as with $1 [perl
	   #112184].

       ·   "undef" on a control character glob ("undef *^H") no longer emits
	   an erroneous warning about ambiguity [perl #112456].

       ·   For efficiency's sake, many operators and built-in functions return
	   the same scalar each time.  Lvalue subroutines and subroutines in
	   the CORE:: namespace were allowing this implementation detail to
	   leak through.  "print &CORE::uc("a"), &CORE::uc("b")" used to print
	   "BB".  The same thing would happen with an lvalue subroutine
	   returning the return value of "uc".	Now the value is copied in
	   such cases.

       ·   "method {}" syntax with an empty block or a block returning an
	   empty list used to crash or use some random value left on the stack
	   as its invocant.  Now it produces an error.

       ·   "vec" now works with extremely large offsets (>2 GB) [perl
	   #111730].

       ·   Changes to overload settings now take effect immediately, as do
	   changes to inheritance that affect overloading.  They used to take
	   effect only after "bless".

	   Objects that were created before a class had any overloading used
	   to remain non-overloaded even if the class gained overloading
	   through "use overload" or @ISA changes, and even after "bless".
	   This has been fixed [perl #112708].

       ·   Classes with overloading can now inherit fallback values.

       ·   Overloading was not respecting a fallback value of 0 if there were
	   overloaded objects on both sides of an assignment operator like
	   "+=" [perl #111856].

       ·   "pos" now croaks with hash and array arguments, instead of
	   producing erroneous warnings.

       ·   "while(each %h)" now implies "while(defined($_ = each %h))", like
	   "readline" and "readdir".

       ·   Subs in the CORE:: namespace no longer crash after "undef *_" when
	   called with no argument list (&CORE::time with no parentheses).

       ·   "unpack" no longer produces the "'/' must follow a numeric type in
	   unpack" error when it is the data that are at fault [perl #60204].

       ·   "join" and "@array" now call FETCH only once on a tied $" [perl
	   #8931].

       ·   Some subroutine calls generated by compiling core ops affected by a
	   "CORE::GLOBAL" override had op checking performed twice.  The
	   checking is always idempotent for pure Perl code, but the double
	   checking can matter when custom call checkers are involved.

       ·   A race condition used to exist around fork that could cause a
	   signal sent to the parent to be handled by both parent and child.
	   Signals are now blocked briefly around fork to prevent this from
	   happening [perl #82580].

       ·   The implementation of code blocks in regular expressions, such as
	   "(?{})" and "(??{})", has been heavily reworked to eliminate a
	   whole slew of bugs.	The main user-visible changes are:

	   ·   Code blocks within patterns are now parsed in the same pass as
	       the surrounding code; in particular it is no longer necessary
	       to have balanced braces: this now works:

		   /(?{	 $x='{'	 })/

	       This means that this error message is no longer generated:

		   Sequence (?{...}) not terminated or not {}-balanced in regex

	       but a new error may be seen:

		   Sequence (?{...}) not terminated with ')'

	       In addition, literal code blocks within run-time patterns are
	       only compiled once, at perl compile-time:

		   for my $p (...) {
		       # this 'FOO' block of code is compiled once,
		       # at the same time as the surrounding 'for' loop
		       /$p{(?{FOO;})/;
		   }

	   ·   Lexical variables are now sane as regards scope, recursion and
	       closure behavior. In particular, "/A(?{B})C/" behaves (from a
	       closure viewpoint) exactly like "/A/ && do { B } && /C/", while
	       "qr/A(?{B})C/" is like "sub {/A/ && do { B } && /C/}". So this
	       code now works how you might expect, creating three regexes
	       that match 0, 1, and 2:

		   for my $i (0..2) {
		       push @r, qr/^(??{$i})$/;
		   }
		   "1" =~ $r[1]; # matches

	   ·   The "use re 'eval'" pragma is now only required for code blocks
	       defined at runtime; in particular in the following, the text of
	       the $r pattern is still interpolated into the new pattern and
	       recompiled, but the individual compiled code-blocks within $r
	       are reused rather than being recompiled, and "use re 'eval'"
	       isn't needed any more:

		   my $r = qr/abc(?{....})def/;
		   /xyz$r/;

	   ·   Flow control operators no longer crash. Each code block runs in
	       a new dynamic scope, so "next" etc. will not see any enclosing
	       loops. "return" returns a value from the code block, not from
	       any enclosing subroutine.

	   ·   Perl normally caches the compilation of run-time patterns, and
	       doesn't recompile if the pattern hasn't changed, but this is
	       now disabled if required for the correct behavior of closures.
	       For example:

		   my $code = '(??{$x})';
		   for my $x (1..3) {
		       # recompile to see fresh value of $x each time
		       $x =~ /$code/;
		   }

	   ·   The "/msix" and "(?msix)" etc. flags are now propagated into
	       the return value from "(??{})"; this now works:

		   "AB" =~ /a(??{'b'})/i;

	   ·   Warnings and errors will appear to come from the surrounding
	       code (or for run-time code blocks, from an eval) rather than
	       from an "re_eval":

		   use re 'eval'; $c = '(?{ warn "foo" })'; /$c/;
		   /(?{ warn "foo" })/;

	       formerly gave:

		   foo at (re_eval 1) line 1.
		   foo at (re_eval 2) line 1.

	       and now gives:

		   foo at (eval 1) line 1.
		   foo at /some/prog line 2.

       ·   Perl now can be recompiled to use any Unicode version.  In v5.16,
	   it worked on Unicodes 6.0 and 6.1, but there were various bugs if
	   earlier releases were used; the older the release the more
	   problems.

       ·   "vec" no longer produces "uninitialized" warnings in lvalue context
	   [perl #9423].

       ·   An optimization involving fixed strings in regular expressions
	   could cause a severe performance penalty in edge cases.  This has
	   been fixed [perl #76546].

       ·   In certain cases, including empty subpatterns within a regular
	   expression (such as "(?:)" or "(?:|)") could disable some
	   optimizations. This has been fixed.

       ·   The "Can't find an opnumber" message that "prototype" produces when
	   passed a string like "CORE::nonexistent_keyword" now passes UTF-8
	   and embedded NULs through unchanged [perl #97478].

       ·   "prototype" now treats magical variables like $1 the same way as
	   non-magical variables when checking for the CORE:: prefix, instead
	   of treating them as subroutine names.

       ·   Under threaded perls, a runtime code block in a regular expression
	   could corrupt the package name stored in the op tree, resulting in
	   bad reads in "caller", and possibly crashes [perl #113060].

       ·   Referencing a closure prototype ("\&{$_[1]}" in an attribute
	   handler for a closure) no longer results in a copy of the
	   subroutine (or assertion failures on debugging builds).

       ·   "eval '__PACKAGE__'" now returns the right answer on threaded
	   builds if the current package has been assigned over (as in
	   "*ThisPackage:: = *ThatPackage::") [perl #78742].

       ·   If a package is deleted by code that it calls, it is possible for
	   "caller" to see a stack frame belonging to that deleted package.
	   "caller" could crash if the stash's memory address was reused for a
	   scalar and a substitution was performed on the same scalar [perl
	   #113486].

       ·   "UNIVERSAL::can" no longer treats its first argument differently
	   depending on whether it is a string or number internally.

       ·   "open" with "<&" for the mode checks to see whether the third
	   argument is a number, in determining whether to treat it as a file
	   descriptor or a handle name.	 Magical variables like $1 were always
	   failing the numeric check and being treated as handle names.

       ·   "warn"'s handling of magical variables ($1, ties) has undergone
	   several fixes.  "FETCH" is only called once now on a tied argument
	   or a tied $@ [perl #97480].	Tied variables returning objects that
	   stringify as "" are no longer ignored.  A tied $@ that happened to
	   return a reference the previous time it was used is no longer
	   ignored.

       ·   "warn """ now treats $@ with a number in it the same way,
	   regardless of whether it happened via "$@=3" or "$@="3"".  It used
	   to ignore the former.  Now it appends "\t...caught", as it has
	   always done with "$@="3"".

       ·   Numeric operators on magical variables (e.g., "$1 + 1") used to use
	   floating point operations even where integer operations were more
	   appropriate, resulting in loss of accuracy on 64-bit platforms
	   [perl #109542].

       ·   Unary negation no longer treats a string as a number if the string
	   happened to be used as a number at some point.  So, if $x contains
	   the string "dogs", "-$x" returns "-dogs" even if "$y=0+$x" has
	   happened at some point.

       ·   In Perl v5.14, "-'-10'" was fixed to return "10", not "+10".	 But
	   magical variables ($1, ties) were not fixed till now [perl #57706].

       ·   Unary negation now treats strings consistently, regardless of the
	   internal "UTF8" flag.

       ·   A regression introduced in Perl v5.16.0 involving
	   "tr/SEARCHLIST/REPLACEMENTLIST/" has been fixed.  Only the first
	   instance is supposed to be meaningful if a character appears more
	   than once in "SEARCHLIST".  Under some circumstances, the final
	   instance was overriding all earlier ones.  [perl #113584]

       ·   Regular expressions like "qr/\87/" previously silently inserted a
	   NUL character, thus matching as if it had been written
	   "qr/\00087/".  Now it matches as if it had been written as
	   "qr/87/", with a message that the sequence "\8" is unrecognized.

       ·   "__SUB__" now works in special blocks ("BEGIN", "END", etc.).

       ·   Thread creation on Windows could theoretically result in a crash if
	   done inside a "BEGIN" block.	 It still does not work properly, but
	   it no longer crashes [perl #111610].

       ·   "\&{''}" (with the empty string) now autovivifies a stub like any
	   other sub name, and no longer produces the "Unable to create sub"
	   error [perl #94476].

       ·   A regression introduced in v5.14.0 has been fixed, in which some
	   calls to the "re" module would clobber $_ [perl #113750].

       ·   "do FILE" now always either sets or clears $@, even when the file
	   can't be read. This ensures that testing $@ first (as recommended
	   by the documentation) always returns the correct result.

       ·   The array iterator used for the "each @array" construct is now
	   correctly reset when @array is cleared [perl #75596]. This happens,
	   for example, when the array is globally assigned to, as in "@array
	   = (...)", but not when its values are assigned to. In terms of the
	   XS API, it means that "av_clear()" will now reset the iterator.

	   This mirrors the behaviour of the hash iterator when the hash is
	   cleared.

       ·   "$class->can", "$class->isa", and "$class->DOES" now return correct
	   results, regardless of whether that package referred to by $class
	   exists [perl #47113].

       ·   Arriving signals no longer clear $@ [perl #45173].

       ·   Allow "my ()" declarations with an empty variable list [perl
	   #113554].

       ·   During parsing, subs declared after errors no longer leave stubs
	   [perl #113712].

       ·   Closures containing no string evals no longer hang on to their
	   containing subroutines, allowing variables closed over by outer
	   subroutines to be freed when the outer sub is freed, even if the
	   inner sub still exists [perl #89544].

       ·   Duplication of in-memory filehandles by opening with a "<&=" or
	   ">&=" mode stopped working properly in v5.16.0.  It was causing the
	   new handle to reference a different scalar variable.	 This has been
	   fixed [perl #113764].

       ·   "qr//" expressions no longer crash with custom regular expression
	   engines that do not set "offs" at regular expression compilation
	   time [perl #112962].

       ·   "delete local" no longer crashes with certain magical arrays and
	   hashes [perl #112966].

       ·   "local" on elements of certain magical arrays and hashes used not
	   to arrange to have the element deleted on scope exit, even if the
	   element did not exist before "local".

       ·   "scalar(write)" no longer returns multiple items [perl #73690].

       ·   String to floating point conversions no longer misparse certain
	   strings under "use locale" [perl #109318].

       ·   @INC filters that die no longer leak memory [perl #92252].

       ·   The implementations of overloaded operations are now called in the
	   correct context. This allows, among other things, being able to
	   properly override "<>" [perl #47119].

       ·   Specifying only the "fallback" key when calling "use overload" now
	   behaves properly [perl #113010].

       ·   "sub foo { my $a = 0; while ($a) { ... } }" and "sub foo { while
	   (0) { ... } }" now return the same thing [perl #73618].

       ·   String negation now behaves the same under "use integer;" as it
	   does without [perl #113012].

       ·   "chr" now returns the Unicode replacement character (U+FFFD) for
	   -1, regardless of the internal representation.  -1 used to wrap if
	   the argument was tied or a string internally.

       ·   Using a "format" after its enclosing sub was freed could crash as
	   of perl v5.12.0, if the format referenced lexical variables from
	   the outer sub.

       ·   Using a "format" after its enclosing sub was undefined could crash
	   as of perl v5.10.0, if the format referenced lexical variables from
	   the outer sub.

       ·   Using a "format" defined inside a closure, which format references
	   lexical variables from outside, never really worked unless the
	   "write" call was directly inside the closure.  In v5.10.0 it even
	   started crashing.  Now the copy of that closure nearest the top of
	   the call stack is used to find those variables.

       ·   Formats that close over variables in special blocks no longer crash
	   if a stub exists with the same name as the special block before the
	   special block is compiled.

       ·   The parser no longer gets confused, treating "eval foo ()" as a
	   syntax error if preceded by "print;" [perl #16249].

       ·   The return value of "syscall" is no longer truncated on 64-bit
	   platforms [perl #113980].

       ·   Constant folding no longer causes "print 1 ? FOO : BAR" to print to
	   the FOO handle [perl #78064].

       ·   "do subname" now calls the named subroutine and uses the file name
	   it returns, instead of opening a file named "subname".

       ·   Subroutines looked up by rv2cv check hooks (registered by XS
	   modules) are now taken into consideration when determining whether
	   "foo bar" should be the sub call "foo(bar)" or the method call
	   ""bar"->foo".

       ·   "CORE::foo::bar" is no longer treated specially, allowing global
	   overrides to be called directly via "CORE::GLOBAL::uc(...)" [perl
	   #113016].

       ·   Calling an undefined sub whose typeglob has been undefined now
	   produces the customary "Undefined subroutine called" error, instead
	   of "Not a CODE reference".

       ·   Two bugs involving @ISA have been fixed.  "*ISA =
	   *glob_without_array" and "undef *ISA; @{*ISA}" would prevent future
	   modifications to @ISA from updating the internal caches used to
	   look up methods.  The *glob_without_array case was a regression
	   from Perl v5.12.

       ·   Regular expression optimisations sometimes caused "$" with "/m" to
	   produce failed or incorrect matches [perl #114068].

       ·   "__SUB__" now works in a "sort" block when the enclosing subroutine
	   is predeclared with "sub foo;" syntax [perl #113710].

       ·   Unicode properties only apply to Unicode code points, which leads
	   to some subtleties when regular expressions are matched against
	   above-Unicode code points.  There is a warning generated to draw
	   your attention to this.  However, this warning was being generated
	   inappropriately in some cases, such as when a program was being
	   parsed.  Non-Unicode matches such as "\w" and "[:word:]" should not
	   generate the warning, as their definitions don't limit them to
	   apply to only Unicode code points.  Now the message is only
	   generated when matching against "\p{}" and "\P{}".  There remains a
	   bug, [perl #114148], for the very few properties in Unicode that
	   match just a single code point.  The warning is not generated if
	   they are matched against an above-Unicode code point.

       ·   Uninitialized warnings mentioning hash elements would only mention
	   the element name if it was not in the first bucket of the hash, due
	   to an off-by-one error.

       ·   A regular expression optimizer bug could cause multiline "^" to
	   behave incorrectly in the presence of line breaks, such that
	   ""/\n\n" =~ m#\A(?:^/$)#im" would not match [perl #115242].

       ·   Failed "fork" in list context no longer corrupts the stack.	"@a =
	   (1, 2, fork, 3)" used to gobble up the 2 and assign "(1, undef, 3)"
	   if the "fork" call failed.

       ·   Numerous memory leaks have been fixed, mostly involving tied
	   variables that die, regular expression character classes and code
	   blocks, and syntax errors.

       ·   Assigning a regular expression ("${qr//}") to a variable that
	   happens to hold a floating point number no longer causes assertion
	   failures on debugging builds.

       ·   Assigning a regular expression to a scalar containing a number no
	   longer causes subsequent numification to produce random numbers.

       ·   Assigning a regular expression to a magic variable no longer wipes
	   away the magic.  This was a regression from v5.10.

       ·   Assigning a regular expression to a blessed scalar no longer
	   results in crashes.	This was also a regression from v5.10.

       ·   Regular expression can now be assigned to tied hash and array
	   elements with flattening into strings.

       ·   Numifying a regular expression no longer results in an
	   uninitialized warning.

       ·   Negative array indices no longer cause EXISTS methods of tied
	   variables to be ignored.  This was a regression from v5.12.

       ·   Negative array indices no longer result in crashes on arrays tied
	   to non-objects.

       ·   "$byte_overload .= $utf8" no longer results in doubly-encoded UTF-8
	   if the left-hand scalar happened to have produced a UTF-8 string
	   the last time overloading was invoked.

       ·   "goto &sub" now uses the current value of @_, instead of using the
	   array the subroutine was originally called with.  This means "local
	   @_ = (...); goto &sub" now works [perl #43077].

       ·   If a debugger is invoked recursively, it no longer stomps on its
	   own lexical variables.  Formerly under recursion all calls would
	   share the same set of lexical variables [perl #115742].

       ·   *_{ARRAY} returned from a subroutine no longer spontaneously
	   becomes empty.

       ·   When using "say" to print to a tied filehandle, the value of "$\"
	   is correctly localized, even if it was previously undef.  [perl
	   #119927]

Known Problems
       ·   UTF8-flagged strings in %ENV on HP-UX 11.00 are buggy

	   The interaction of UTF8-flagged strings and %ENV on HP-UX 11.00 is
	   currently dodgy in some not-yet-fully-diagnosed way.	 Expect test
	   failures in t/op/magic.t, followed by unknown behavior when storing
	   wide characters in the environment.

Obituary
       Hojung Yoon (AMORETTE), 24, of Seoul, South Korea, went to his long
       rest on May 8, 2013 with llama figurine and autographed TIMTOADY card.
       He was a brilliant young Perl 5 & 6 hacker and a devoted member of
       Seoul.pm.  He programmed Perl, talked Perl, ate Perl, and loved Perl.
       We believe that he is still programming in Perl with his broken IBM
       laptop somewhere.  He will be missed.

Acknowledgements
       Perl v5.18.0 represents approximately 12 months of development since
       Perl v5.16.0 and contains approximately 400,000 lines of changes across
       2,100 files from 113 authors.

       Perl continues to flourish into its third decade thanks to a vibrant
       community of users and developers. The following people are known to
       have contributed the improvements that became Perl v5.18.0:

       Aaron Crane, Aaron Trevena, Abhijit Menon-Sen, Adrian M. Enache, Alan
       Haggai Alavi, Alexandr Ciornii, Andrew Tam, Andy Dougherty, Anton
       Nikishaev, Aristotle Pagaltzis, Augustina Blair, Bob Ernst, Brad
       Gilbert, Breno G. de Oliveira, Brian Carlson, Brian Fraser, Charlie
       Gonzalez, Chip Salzenberg, Chris 'BinGOs' Williams, Christian Hansen,
       Colin Kuskie, Craig A. Berry, Dagfinn Ilmari Mannsaaker, Daniel Dragan,
       Daniel Perrett, Darin McBride, Dave Rolsky, David Golden, David
       Leadbeater, David Mitchell, David Nicol, Dominic Hargreaves, E.
       Choroba, Eric Brine, Evan Miller, Father Chrysostomos, Florian Ragwitz,
       Francois Perrad, George Greer, Goro Fuji, H.Merijn Brand, Herbert
       Breunung, Hugo van der Sanden, Igor Zaytsev, James E Keenan, Jan
       Dubois, Jasmine Ahuja, Jerry D. Hedden, Jess Robinson, Jesse Luehrs,
       Joaquin Ferrero, Joel Berger, John Goodyear, John Peacock, Karen
       Etheridge, Karl Williamson, Karthik Rajagopalan, Kent Fredric, Leon
       Timmermans, Lucas Holt, Lukas Mai, Marcus Holland-Moritz, Markus
       Jansen, Martin Hasch, Matthew Horsfall, Max Maischein, Michael G
       Schwern, Michael Schroeder, Moritz Lenz, Nicholas Clark, Niko Tyni,
       Oleg Nesterov, Patrik Haegglund, Paul Green, Paul Johnson, Paul
       Marquess, Peter Martini, Rafael Garcia-Suarez, Reini Urban, Renee
       Baecker, Rhesa Rozendaal, Ricardo Signes, Robin Barker, Ronald J.
       Kimball, Ruslan Zakirov, Salvador Fandin~o, Sawyer X, Scott Lanning,
       Sergey Alekseev, Shawn M Moore, Shirakata Kentaro, Shlomi Fish,
       Sisyphus, Smylers, Steffen Mueller, Steve Hay, Steve Peters, Steven
       Schubiger, Sullivan Beck, Sven Strickroth, Sebastien Aperghis-Tramoni,
       Thomas Sibley, Tobias Leich, Tom Wyant, Tony Cook, Vadim Konovalov,
       Vincent Pit, Volker Schatz, Walt Mankowski, Yves Orton, Zefram.

       The list above is almost certainly incomplete as it is automatically
       generated from version control history. In particular, it does not
       include the names of the (very much appreciated) contributors who
       reported issues to the Perl bug tracker.

       Many of the changes included in this version originated in the CPAN
       modules included in Perl's core. We're grateful to the entire CPAN
       community for helping Perl to flourish.

       For a more complete list of all of Perl's historical contributors,
       please see the AUTHORS file in the Perl source distribution.

Reporting Bugs
       If you find what you think is a bug, you might check the articles
       recently posted to the comp.lang.perl.misc newsgroup and the perl bug
       database at http://rt.perl.org/perlbug/ .  There may also be
       information at http://www.perl.org/ , the Perl Home Page.

       If you believe you have an unreported bug, please run the perlbug
       program included with your release.  Be sure to trim your bug down to a
       tiny but sufficient test case.  Your bug report, along with the output
       of "perl -V", will be sent off to perlbug@perl.org to be analysed by
       the Perl porting team.

       If the bug you are reporting has security implications, which make it
       inappropriate to send to a publicly archived mailing list, then please
       send it to perl5-security-report@perl.org.  This points to a closed
       subscription unarchived mailing list, which includes all the core
       committers, who will be able to help assess the impact of issues,
       figure out a resolution, and help co-ordinate the release of patches to
       mitigate or fix the problem across all platforms on which Perl is
       supported.  Please only use this address for security issues in the
       Perl core, not for modules independently distributed on CPAN.

SEE ALSO
       The Changes file for an explanation of how to view exhaustive details
       on what changed.

       The INSTALL file for how to build Perl.

       The README file for general stuff.

       The Artistic and Copying files for copyright information.

perl v5.18.2			  2014-01-06		      PERL5180DELTA(1)
[top]

List of man pages available for SmartOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net