pci_error_tolerance_time(5)pci_error_tolerance_time(5)NAMEpci_error_tolerance_time - time interval, in minutes, between two PCI
errors at a I/O slot that will result in automatic PCI Error Recovery
VALUES
Default
Allowed values
(disabled) or non-zero (enabled)
Recommended values
DESCRIPTION
is a dynamic tunable that corresponds to time interval in minutes. It
determines whether an automatic PCI Error Recovery should be initiated
or not between two PCI errors occurring at an I/O slot. If two PCI
errors occur at a slot within this specified time interval, the PCI
card in the slot will be suspended and a manual PCI Error Recovery
operation will have to be performed to make the card functional. Refer
to the section of the olrad(1M) manpage for more details regarding the
manual PCI Error Recovery operation.
Who Is Expected to Change This Tunable?
System administrators can change the value of based on the frequency of
PCI errors seen in the system.
Restrictions on Changing
None. This tunable is dynamic. Changes to this tunable take effect
immediately.
WARNINGS
All HP-UX kernel tunable parameters are release specific. This parame‐
ter may be removed or have its meaning changed in future releases of
HP-UX.
Installation of optional kernel software, from HP or other vendors, may
cause changes to tunable parameter values. After installation, some
tunable parameters may no longer be at the default or recommended val‐
ues. For information about the effects of installation on tunable val‐
ues, consult the documentation for the kernel software being installed.
For information about optional kernel software that was factory
installed on your system, see at
AUTHOR
was developed by HP.
SEE ALSOolrad(1M).
available under the section at
Tunable Kernel Parameterpci_error_tolerance_time(5)
