patch man page on Kali

Man page or keyword search:  
man Server   9211 pages
apropos Keyword Search (all sections)
Output format
Kali logo
[printable version]

PATCH(1)							      PATCH(1)

NAME
       patch - apply a diff file to an original

SYNOPSIS
       patch [options] [originalfile [patchfile]]

       but usually just

       patch -pnum <patchfile

DESCRIPTION
       patch takes a patch file patchfile containing a difference listing pro‐
       duced by the diff program and applies those differences to one or  more
       original	 files, producing patched versions.  Normally the patched ver‐
       sions are put in place of the originals.	 Backups can be made; see  the
       -b  or  --backup option.	 The names of the files to be patched are usu‐
       ally taken from the patch file, but if there's  just  one  file	to  be
       patched it can be specified on the command line as originalfile.

       Upon startup, patch attempts to determine the type of the diff listing,
       unless overruled by a -c (--context), -e (--ed), -n (--normal),	or  -u
       (--unified)  option.  Context diffs (old-style, new-style, and unified)
       and normal diffs are applied by the  patch  program  itself,  while  ed
       diffs are simply fed to the ed(1) editor via a pipe.

       patch  tries to skip any leading garbage, apply the diff, and then skip
       any trailing garbage.  Thus you could feed an article or	 message  con‐
       taining	a  diff	 listing  to patch, and it should work.	 If the entire
       diff is indented by a consistent amount, if lines end in CRLF, or if  a
       diff  is	 encapsulated  one  or	more times by prepending "- " to lines
       starting with "-" as specified by Internet RFC 934, this is taken  into
       account.	  After	 removing  indenting or encapsulation, lines beginning
       with # are ignored, as they are considered to be comments.

       With context diffs, and to a lesser extent with normal diffs, patch can
       detect  when the line numbers mentioned in the patch are incorrect, and
       attempts to find the correct place to apply each hunk of the patch.  As
       a first guess, it takes the line number mentioned for the hunk, plus or
       minus any offset used in applying the previous hunk.  If	 that  is  not
       the correct place, patch scans both forwards and backwards for a set of
       lines matching the context given in the hunk.  First patch looks for  a
       place where all lines of the context match.  If no such place is found,
       and it's a context diff, and the maximum fuzz factor is	set  to	 1  or
       more, then another scan takes place ignoring the first and last line of
       context.	 If that fails, and the maximum fuzz factor is	set  to	 2  or
       more,  the  first  two  and  last two lines of context are ignored, and
       another scan is made.  (The default maximum fuzz factor is 2.)

       Hunks with less prefix context  than  suffix  context  (after  applying
       fuzz)  must  apply  at the start of the file if their first line number
       is 1.  Hunks with more prefix context than suffix context (after apply‐
       ing fuzz) must apply at the end of the file.

       If patch cannot find a place to install that hunk of the patch, it puts
       the hunk out to a reject file, which normally is the name of the output
       file  plus  a .rej suffix, or # if .rej would generate a file name that
       is too long (if even appending the single character #  makes  the  file
       name too long, then # replaces the file name's last character).

       The  rejected hunk comes out in unified or context diff format.	If the
       input was a normal diff, many of the contexts  are  simply  null.   The
       line  numbers  on the hunks in the reject file may be different than in
       the patch file: they reflect the approximate location patch thinks  the
       failed hunks belong in the new file rather than the old one.

       As  each	 hunk is completed, you are told if the hunk failed, and if so
       which line (in the new file) patch thought the hunk should go  on.   If
       the  hunk  is installed at a different line from the line number speci‐
       fied in the diff, you are told the offset.  A single large  offset  may
       indicate	 that  a  hunk was installed in the wrong place.  You are also
       told if a fuzz factor was used to make the match,  in  which  case  you
       should  also be slightly suspicious.  If the --verbose option is given,
       you are also told about hunks that match exactly.

       If no original file origfile is specified on the	 command  line,	 patch
       tries  to figure out from the leading garbage what the name of the file
       to edit is, using the following rules.

       First, patch takes an ordered list of candidate file names as follows:

	· If the header is that of a context diff, patch takes the old and new
	  file	names  in  the	header.	 A name is ignored if it does not have
	  enough slashes to satisfy the -pnum or --strip=num option.  The name
	  /dev/null is also ignored.

	· If  there is an Index: line in the leading garbage and if either the
	  old and new names are both absent  or	 if  patch  is	conforming  to
	  POSIX, patch takes the name in the Index: line.

	· For the purpose of the following rules, the candidate file names are
	  considered to be in the order (old, new, index), regardless  of  the
	  order that they appear in the header.

       Then patch selects a file name from the candidate list as follows:

	· If  some  of	the named files exist, patch selects the first name if
	  conforming to POSIX, and the best name otherwise.

	· If patch is not ignoring RCS, ClearCase, Perforce, and SCCS (see the
	  -g num  or  --get=num	 option), and no named files exist but an RCS,
	  ClearCase, Perforce, or SCCS master  is  found,  patch  selects  the
	  first named file with an RCS, ClearCase, Perforce, or SCCS master.

	· If no named files exist, no RCS, ClearCase, Perforce, or SCCS master
	  was found, some names are given, patch is not conforming  to	POSIX,
	  and  the patch appears to create a file, patch selects the best name
	  requiring the creation of the fewest directories.

	· If no file name results from the above heuristics, you are asked for
	  the name of the file to patch, and patch selects that name.

       To  determine  the  best	 of a nonempty list of file names, patch first
       takes all the names with the fewest path name components; of those,  it
       then  takes all the names with the shortest basename; of those, it then
       takes all the shortest names; finally, it  takes	 the  first  remaining
       name.

       Additionally,  if  the  leading	garbage contains a Prereq: line, patch
       takes the first word from the prerequisites line	 (normally  a  version
       number)	and checks the original file to see if that word can be found.
       If not, patch asks for confirmation before proceeding.

       The upshot of all this is that you should be able to say,  while	 in  a
       news interface, something like the following:

	      | patch -d /usr/src/local/blurfl

       and patch a file in the blurfl directory directly from the article con‐
       taining the patch.

       If the patch file contains more than one patch, patch  tries  to	 apply
       each  of	 them  as if they came from separate patch files.  This means,
       among other things, that it is assumed that the name  of	 the  file  to
       patch  must  be	determined for each diff listing, and that the garbage
       before each diff listing contains interesting things such as file names
       and revision level, as mentioned previously.

OPTIONS
       -b  or  --backup
	  Make	backup	files.	 That is, when patching a file, rename or copy
	  the original instead of removing it.	See the -V  or	--version-con‐
	  trol option for details about how backup file names are determined.

       --backup-if-mismatch
	  Back	up  a file if the patch does not match the file exactly and if
	  backups are not otherwise requested.	This  is  the  default	unless
	  patch is conforming to POSIX.

       --no-backup-if-mismatch
	  Do  not  back up a file if the patch does not match the file exactly
	  and if backups are not otherwise requested.  This is the default  if
	  patch is conforming to POSIX.

       -B pref	or  --prefix=pref
	  Use  the  simple  method  to determine backup file names (see the -V
	  method or --version-control method option), and  append  pref	 to  a
	  file	name  when generating its backup file name.  For example, with
	  -B /junk/ the	 simple	 backup	 file  name  for  src/patch/util.c  is
	  /junk/src/patch/util.c.

       --binary
	  Write	 all  files  in	 binary	 mode,	except for standard output and
	  /dev/tty.  When reading, disable the heuristic for transforming CRLF
	  line	endings	 into LF line endings.	This option is needed on POSIX
	  systems when applying patches generated on non-POSIX systems to non-
	  POSIX	 files.	 (On POSIX systems, file reads and writes never trans‐
	  form line endings. On Windows, reads and writes  do  transform  line
	  endings by default, and patches should be generated by diff --binary
	  when line endings are significant.)

       -c  or  --context
	  Interpret the patch file as a ordinary context diff.

       -d dir  or  --directory=dir
	  Change to the directory dir immediately, before doing anything else.

       -D define  or  --ifdef=define
	  Use the #ifdef ... #endif construct to mark changes, with define  as
	  the differentiating symbol.

       --dry-run
	  Print	 the results of applying the patches without actually changing
	  any files.

       -e  or  --ed
	  Interpret the patch file as an ed script.

       -E  or  --remove-empty-files
	  Remove output files that are	empty  after  the  patches  have  been
	  applied.  Normally this option is unnecessary, since patch can exam‐
	  ine the time stamps on the header to determine whether a file should
	  exist	 after	patching.  However, if the input is not a context diff
	  or if patch is conforming to POSIX,  patch  does  not	 remove	 empty
	  patched  files  unless  this	option is given.  When patch removes a
	  file, it also attempts to remove any empty ancestor directories.

       -f  or  --force
	  Assume that the user knows exactly what he or she is doing,  and  do
	  not  ask any questions.  Skip patches whose headers do not say which
	  file is to be patched; patch files even though they have  the	 wrong
	  version  for	the Prereq: line in the patch; and assume that patches
	  are not reversed even if they look like they are.  This option  does
	  not suppress commentary; use -s for that.

       -F num  or  --fuzz=num
	  Set the maximum fuzz factor.	This option only applies to diffs that
	  have context, and causes patch to ignore up to that  many  lines  of
	  context in looking for places to install a hunk.  Note that a larger
	  fuzz factor increases the odds of a faulty patch.  The default  fuzz
	  factor  is  2.  A fuzz factor greater than or equal to the number of
	  lines of context in the context diff, ordinarily 3, ignores all con‐
	  text.

       -g num  or  --get=num
	  This	option	controls  patch's  actions when a file is under RCS or
	  SCCS control, and does not exist or is  read-only  and  matches  the
	  default  version, or when a file is under ClearCase or Perforce con‐
	  trol and does not exist.  If num is positive, patch gets (or	checks
	  out)	the  file  from	 the  revision	control system; if zero, patch
	  ignores RCS, ClearCase, Perforce, and SCCS  and  does	 not  get  the
	  file;	 and if negative, patch asks the user whether to get the file.
	  The default value of this option  is	given  by  the	value  of  the
	  PATCH_GET  environment  variable  if	it is set; if not, the default
	  value is zero.

       --help
	  Print a summary of options and exit.

       -i patchfile  or	 --input=patchfile
	  Read the patch from patchfile.  If patchfile is -, read  from	 stan‐
	  dard input, the default.

       -l  or  --ignore-whitespace
	  Match	 patterns  loosely, in case tabs or spaces have been munged in
	  your files.  Any sequence of one or more blanks in  the  patch  file
	  matches  any	sequence in the original file, and sequences of blanks
	  at the ends of lines are  ignored.   Normal  characters  must	 still
	  match	 exactly.  Each line of the context must still match a line in
	  the original file.

       --merge or --merge=merge or --merge=diff3
	  Merge a patch file into the original files similar  to  diff3(1)  or
	  merge(1).   If  a  conflict  is  found,  patch outputs a warning and
	  brackets the conflict with <<<<<<< and  >>>>>>>  lines.   A  typical
	  conflict will look like this:

	      <<<<<<<
	      lines from the original file
	      |||||||
	      original lines from the patch
	      =======
	      new lines from the patch
	      >>>>>>>

	  The  optional	 argument  of --merge determines the output format for
	  conflicts: the diff3 format shows the ||||||| section with the orig‐
	  inal	lines  from  the  patch;  in the merge format, this section is
	  missing.  The merge format is the default.

	  This option implies --forward	 and  does  not	 take  the  --fuzz=num
	  option into account.

       -n  or  --normal
	  Interpret the patch file as a normal diff.

       -N  or  --forward
	  When a patch does not apply, patch usually checks if the patch looks
	  like it has been reversed.  The --forward option prevents that.  See
	  also -R.

       -o outfile  or  --output=outfile
	  Send	output	to outfile instead of patching files in place.	Do not
	  use this option if outfile is one of the files to be patched.	  When
	  outfile  is -, send output to standard output, and send any messages
	  that would usually go to standard output to standard error.

       -pnum  or  --strip=num
	  Strip the smallest prefix containing num leading slashes  from  each
	  file	name found in the patch file.  A sequence of one or more adja‐
	  cent slashes is counted as a single slash.  This controls  how  file
	  names	 found	in  the	 patch file are treated, in case you keep your
	  files in a different directory than the  person  who	sent  out  the
	  patch.  For example, supposing the file name in the patch file was

	  /u/howard/src/blurfl/blurfl.c

       setting -p0 gives the entire file name unmodified, -p1 gives

	  u/howard/src/blurfl/blurfl.c

       without the leading slash, -p4 gives

	  blurfl/blurfl.c

       and not specifying -p at all just gives you blurfl.c.  Whatever you end
       up with is looked for either in the current directory, or the directory
       specified by the -d option.

       --posix
	  Conform more strictly to the POSIX standard, as follows.

	   · Take the first existing file from the list (old, new, index) when
	     intuiting file names from diff headers.

	   · Do not remove files that are empty after patching.

	   · Do not ask whether to get files from RCS, ClearCase, Perforce, or
	     SCCS.

	   · Require that all options precede the files in the command line.

	   · Do not backup files when there is a mismatch.

       --quoting-style=word
	  Use style word to quote output names.	 The word should be one of the
	  following:

	  literal
		 Output names as-is.

	  shell	 Quote names for the shell if they contain  shell  metacharac‐
		 ters or would cause ambiguous output.

	  shell-always
		 Quote	names  for  the shell, even if they would normally not
		 require quoting.

	  c	 Quote names as for a C language string.

	  escape Quote as with c  except  omit	the  surrounding  double-quote
		 characters.

	  You can specify the default value of the --quoting-style option with
	  the environment variable QUOTING_STYLE.  If that  environment	 vari‐
	  able is not set, the default value is shell.

       -r rejectfile  or  --reject-file=rejectfile
	  Put  rejects into rejectfile instead of the default .rej file.  When
	  rejectfile is -, discard rejects.

       -R  or  --reverse
	  Assume that this patch was  created  with  the  old  and  new	 files
	  swapped.   (Yes,  I'm	 afraid	 that  does happen occasionally, human
	  nature being what it is.)  patch attempts to swap each  hunk	around
	  before applying it.  Rejects come out in the swapped format.	The -R
	  option does not work with ed diff scripts because there is too  lit‐
	  tle information to reconstruct the reverse operation.

	  If  the  first hunk of a patch fails, patch reverses the hunk to see
	  if it can be applied that way.  If it can, you are asked if you want
	  to  have  the -R option set.	If it can't, the patch continues to be
	  applied normally.  (Note: this method cannot detect a reversed patch
	  if  it  is a normal diff and if the first command is an append (i.e.
	  it should have been a delete) since appends always succeed,  due  to
	  the  fact  that  a  null  context  matches  anywhere.	 Luckily, most
	  patches add or  change  lines	 rather	 than  delete  them,  so  most
	  reversed  normal  diffs begin with a delete, which fails, triggering
	  the heuristic.)

       --read-only=behavior
	  Behave as requested when trying to modify a read-only	 file:	ignore
	  the potential problem, warn about it (the default), or fail.

       --reject-format=format
	  Produce reject files in the specified format (either context or uni‐
	  fied).  Without this option, rejected hunks come out in unified diff
	  format  if the input patch was of that format, otherwise in ordinary
	  context diff form.

       -s  or  --silent	 or  --quiet
	  Work silently, unless an error occurs.

       --follow-symlinks
	  When looking for input files, follow symbolic links.	 Replaces  the
	  symbolic  links,  instead  of modifying the files the symbolic links
	  point to.  Git-style patches to symbolic links will no longer apply.
	  This	option	exists	for backwards compatibility with previous ver‐
	  sions of patch; its use is discouraged.

       -t  or  --batch
	  Suppress questions like -f, but  make	 some  different  assumptions:
	  skip	patches	 whose	headers do not contain file names (the same as
	  -f); skip patches for which the file has the wrong version  for  the
	  Prereq:  line	 in the patch; and assume that patches are reversed if
	  they look like they are.

       -T  or  --set-time
	  Set the modification and access times of  patched  files  from  time
	  stamps  given in context diff headers.  Unless specified in the time
	  stamps, assume that the context diff headers use local time.

	  Use of this option with time stamps that do not include  time	 zones
	  is  not  recommended, because patches using local time cannot easily
	  be used by people in other time zones, and because local time stamps
	  are  ambiguous when local clocks move backwards during daylight-sav‐
	  ing time adjustments.	 Make  sure  that  time	 stamps	 include  time
	  zones,  or  generate	patches	 with  UTC and use the -Z or --set-utc
	  option instead.

       -u  or  --unified
	  Interpret the patch file as a unified context diff.

       -v  or  --version
	  Print out patch's revision header and patch level, and exit.

       -V method  or  --version-control=method
	  Use method to determine backup file names.  The method can  also  be
	  given	 by the PATCH_VERSION_CONTROL (or, if that's not set, the VER‐
	  SION_CONTROL) environment variable,  which  is  overridden  by  this
	  option.   The	 method does not affect whether backup files are made;
	  it affects only the names of any backup files that are made.

	  The value of method is like the GNU  Emacs  `version-control'	 vari‐
	  able; patch also recognizes synonyms that are more descriptive.  The
	  valid values for method are (unique abbreviations are accepted):

	  existing  or	nil
	     Make numbered backups of files that already have them,  otherwise
	     simple backups.  This is the default.

	  numbered  or	t
	     Make  numbered  backups.	The numbered backup file name for F is
	     F.~N~ where N is the version number.

	  simple  or  never
	     Make simple backups.  The -B or --prefix, -Y  or  --basename-pre‐
	     fix,  and	-z  or --suffix options specify the simple backup file
	     name.  If none of these options are given, then a	simple	backup
	     suffix is used; it is the value of the SIMPLE_BACKUP_SUFFIX envi‐
	     ronment variable if set, and is .orig otherwise.

	  With numbered or simple backups, if the  backup  file	 name  is  too
	  long, the backup suffix ~ is used instead; if even appending ~ would
	  make the name too long, then ~ replaces the last  character  of  the
	  file name.

       --verbose
	  Output extra information about the work being done.

       -x num  or  --debug=num
	  Set internal debugging flags of interest only to patch patchers.

       -Y pref	or  --basename-prefix=pref
	  Use  the  simple  method  to determine backup file names (see the -V
	  method or --version-control method option), and prefix pref  to  the
	  basename  of	a file name when generating its backup file name.  For
	  example,  with  -Y .del/   the   simple   backup   file   name   for
	  src/patch/util.c is src/patch/.del/util.c.

       -z suffix  or  --suffix=suffix
	  Use  the  simple  method  to determine backup file names (see the -V
	  method or --version-control method option), and use  suffix  as  the
	  suffix.    For   example,   with  -z -  the  backup  file  name  for
	  src/patch/util.c is src/patch/util.c-.

       -Z  or  --set-utc
	  Set the modification and access times of  patched  files  from  time
	  stamps  given	 in context diff headers. Unless specified in the time
	  stamps, assume that the context diff headers use Coordinated Univer‐
	  sal  Time  (UTC, often known as GMT).	 Also see the -T or --set-time
	  option.

	  The -Z or --set-utc and -T or --set-time  options  normally  refrain
	  from	setting	 a  file's  time  if the file's original time does not
	  match the time given in the patch header, or if its contents do  not
	  match	 the  patch  exactly.  However, if the -f or --force option is
	  given, the file time is set regardless.

	  Due to the limitations of diff output format, these  options	cannot
	  update the times of files whose contents have not changed.  Also, if
	  you use these options, you should remove (e.g. with make clean)  all
	  files that depend on the patched files, so that later invocations of
	  make do not get confused by the patched files' times.

ENVIRONMENT
       PATCH_GET
	  This specifies whether patch gets missing or	read-only  files  from
	  RCS,	ClearCase,  Perforce,  or SCCS by default; see the -g or --get
	  option.

       POSIXLY_CORRECT
	  If set, patch conforms  more	strictly  to  the  POSIX  standard  by
	  default: see the --posix option.

       QUOTING_STYLE
	  Default value of the --quoting-style option.

       SIMPLE_BACKUP_SUFFIX
	  Extension to use for simple backup file names instead of .orig.

       TMPDIR, TMP, TEMP
	  Directory  to	 put temporary files in; patch uses the first environ‐
	  ment variable in this list that  is  set.   If  none	are  set,  the
	  default is system-dependent; it is normally /tmp on Unix hosts.

       VERSION_CONTROL or PATCH_VERSION_CONTROL
	  Selects  version  control  style;  see  the  -v or --version-control
	  option.

FILES
       $TMPDIR/p*
	  temporary files

       /dev/tty
	  controlling terminal; used to get answers to questions asked of  the
	  user

SEE ALSO
       diff(1), ed(1), merge(1).

       Marshall	 T. Rose and Einar A. Stefferud, Proposed Standard for Message
       Encapsulation,	 Internet    RFC    934	    <URL:ftp://ftp.isi.edu/in-
       notes/rfc934.txt> (1985-01).

NOTES FOR PATCH SENDERS
       There are several things you should bear in mind if you are going to be
       sending out patches.

       Create your  patch  systematically.   A	good  method  is  the  command
       diff -Naur old new  where old and new identify the old and new directo‐
       ries.  The names old and new should not contain any slashes.  The  diff
       command's  headers  should have dates and times in Universal Time using
       traditional Unix format, so that patch recipients can  use  the	-Z  or
       --set-utc  option.  Here is an example command, using Bourne shell syn‐
       tax:

	      LC_ALL=C TZ=UTC0 diff -Naur gcc-2.7 gcc-2.8

       Tell your recipients how to apply  the  patch  by  telling  them	 which
       directory  to cd to, and which patch options to use.  The option string
       -Np1 is recommended.  Test your procedure by pretending to be a recipi‐
       ent and applying your patch to a copy of the original files.

       You can save people a lot of grief by keeping a patchlevel.h file which
       is patched to increment the patch level as the first diff in the	 patch
       file  you  send	out.   If you put a Prereq: line in with the patch, it
       won't let them apply patches out of order without some warning.

       You can create a file by sending out a diff that compares /dev/null  or
       an empty file dated the Epoch (1970-01-01 00:00:00 UTC) to the file you
       want to create.	This only works if the file you want to create doesn't
       exist  already  in  the target directory.  Conversely, you can remove a
       file by sending out a context diff that compares the file to be deleted
       with  an	 empty	file dated the Epoch.  The file will be removed unless
       patch is conforming to POSIX and the -E or --remove-empty-files	option
       is  not	given.	An easy way to generate patches that create and remove
       files is to use GNU diff's -N or --new-file option.

       If the recipient is supposed to use the -pN option, do not send	output
       that looks like this:

	      diff -Naur v2.0.29/prog/README prog/README
	      --- v2.0.29/prog/README	Mon Mar 10 15:13:12 1997
	      +++ prog/README	Mon Mar 17 14:58:22 1997

       because	the two file names have different numbers of slashes, and dif‐
       ferent versions of patch interpret  the	file  names  differently.   To
       avoid confusion, send output that looks like this instead:

	      diff -Naur v2.0.29/prog/README v2.0.30/prog/README
	      --- v2.0.29/prog/README	Mon Mar 10 15:13:12 1997
	      +++ v2.0.30/prog/README	Mon Mar 17 14:58:22 1997

       Avoid  sending patches that compare backup file names like README.orig,
       since this might confuse patch into patching a backup file  instead  of
       the  real  file.	 Instead, send patches that compare the same base file
       names in different directories, e.g. old/README and new/README.

       Take care not to send out reversed patches, since it makes people  won‐
       der whether they already applied the patch.

       Try  not to have your patch modify derived files (e.g. the file config‐
       ure where there is a line configure: configure.in  in  your  makefile),
       since the recipient should be able to regenerate the derived files any‐
       way.  If you must send diffs of derived files, generate the diffs using
       UTC,  have  the	recipients  apply  the	patch with the -Z or --set-utc
       option, and have them remove any unpatched files that depend on patched
       files (e.g. with make clean).

       While  you  may be able to get away with putting 582 diff listings into
       one file, it may be wiser to group related patches into separate	 files
       in case something goes haywire.

DIAGNOSTICS
       Diagnostics  generally  indicate	 that  patch couldn't parse your patch
       file.

       If the --verbose option is given, the  message  Hmm...  indicates  that
       there  is unprocessed text in the patch file and that patch is attempt‐
       ing to intuit whether there is a patch in that text and,	 if  so,  what
       kind of patch it is.

       patch's	exit  status  is 0 if all hunks are applied successfully, 1 if
       some hunks cannot be applied or there were merge conflicts,  and	 2  if
       there  is  more	serious	 trouble.  When applying a set of patches in a
       loop it behooves you to check this exit status so  you  don't  apply  a
       later patch to a partially patched file.

CAVEATS
       Context	diffs  cannot  reliably	 represent the creation or deletion of
       empty files, empty directories,	or  special  files  such  as  symbolic
       links.  Nor can they represent changes to file metadata like ownership,
       permissions, or whether one file is a hard link to another.  If changes
       like  these  are	 also  required,  separate  instructions (e.g. a shell
       script) to accomplish them should accompany the patch.

       patch cannot tell if the line numbers are off in an ed script, and  can
       detect bad line numbers in a normal diff only when it finds a change or
       deletion.  A context diff using fuzz factor 3 may have the  same	 prob‐
       lem.   You  should  probably do a context diff in these cases to see if
       the changes made sense.	Of  course,  compiling	without	 errors	 is  a
       pretty good indication that the patch worked, but not always.

       patch  usually  produces	 the correct results, even when it has to do a
       lot of guessing.	 However, the results are  guaranteed  to  be  correct
       only  when the patch is applied to exactly the same version of the file
       that the patch was generated from.

COMPATIBILITY ISSUES
       The POSIX standard specifies behavior that differs from patch's	tradi‐
       tional  behavior.  You should be aware of these differences if you must
       interoperate with patch versions 2.1 and earlier, which do not  conform
       to POSIX.

	· In  traditional  patch,  the -p option's operand was optional, and a
	  bare -p was equivalent to -p0.  The -p option now requires an	 oper‐
	  and,	and -p 0 is now equivalent to -p0.  For maximum compatibility,
	  use options like -p0 and -p1.

	  Also, traditional patch simply counted slashes when  stripping  path
	  prefixes; patch now counts pathname components.  That is, a sequence
	  of one or more adjacent slashes now counts as a single  slash.   For
	  maximum  portability,	 avoid	sending	 patches containing // in file
	  names.

	· In traditional patch, backups were enabled by default.  This	behav‐
	  ior is now enabled with the -b or --backup option.

	  Conversely,  in POSIX patch, backups are never made, even when there
	  is a mismatch.  In GNU patch, this  behavior	is  enabled  with  the
	  --no-backup-if-mismatch  option,  or by conforming to POSIX with the
	  --posix option or by setting the POSIXLY_CORRECT  environment	 vari‐
	  able.

	  The  -b suffix  option  of  traditional  patch  is equivalent to the
	  -b -z suffix options of GNU patch.

	· Traditional patch used a complicated (and  incompletely  documented)
	  method  to  intuit the name of the file to be patched from the patch
	  header.  This method did  not	 conform  to  POSIX,  and  had	a  few
	  gotchas.   Now patch uses a different, equally complicated (but bet‐
	  ter documented) method that is optionally POSIX-conforming; we  hope
	  it  has  fewer  gotchas.  The two methods are compatible if the file
	  names in the context diff header and the Index: line are all identi‐
	  cal  after  prefix-stripping.	  Your patch is normally compatible if
	  each header's file names all contain the same number of slashes.

	· When traditional patch asked the user a question, it sent the	 ques‐
	  tion	to standard error and looked for an answer from the first file
	  in the following list that was a terminal: standard error,  standard
	  output,  /dev/tty, and standard input.  Now patch sends questions to
	  standard output and gets answers from /dev/tty.  Defaults  for  some
	  answers  have been changed so that patch never goes into an infinite
	  loop when using default answers.

	· Traditional patch exited with a status value that counted the number
	  of bad hunks, or with status 1 if there was real trouble.  Now patch
	  exits with status 1 if some hunks failed, or with  2	if  there  was
	  real trouble.

	· Limit	 yourself  to  the following options when sending instructions
	  meant to be executed by anyone running GNU patch, traditional patch,
	  or  a	 patch	that conforms to POSIX.	 Spaces are significant in the
	  following list, and operands are required.

	     -c
	     -d dir
	     -D define
	     -e
	     -l
	     -n
	     -N
	     -o outfile
	     -pnum
	     -R
	     -r rejectfile

BUGS
       Please report bugs via email to <bug-patch@gnu.org>.

       If code has been duplicated (for instance with #ifdef OLDCODE ... #else
       ...  #endif),  patch is incapable of patching both versions, and, if it
       works at all, will likely patch the wrong one, and  tell	 you  that  it
       succeeded to boot.

       If  you	apply  a  patch	 you've	 already applied, patch thinks it is a
       reversed patch, and offers to un-apply the patch.  This could  be  con‐
       strued as a feature.

       Computing  how  to  merge a hunk is significantly harder than using the
       standard fuzzy algorithm.  Bigger hunks, more context, a bigger	offset
       from  the  original  location, and a worse match all slow the algorithm
       down.

COPYING
       Copyright (C) 1984, 1985, 1986, 1988 Larry Wall.
       Copyright (C) 1989, 1990, 1991, 1992, 1993,  1994,  1995,  1996,	 1997,
       1998, 1999, 2000, 2001, 2002, 2009 Free Software Foundation, Inc.

       Permission  is  granted	to make and distribute verbatim copies of this
       manual provided the copyright notice and	 this  permission  notice  are
       preserved on all copies.

       Permission  is granted to copy and distribute modified versions of this
       manual under the conditions for verbatim	 copying,  provided  that  the
       entire  resulting derived work is distributed under the terms of a per‐
       mission notice identical to this one.

       Permission is granted to copy and distribute translations of this  man‐
       ual into another language, under the above conditions for modified ver‐
       sions, except that this permission notice may be included  in  transla‐
       tions approved by the copyright holders instead of in the original Eng‐
       lish.

AUTHORS
       Larry Wall wrote the original version of patch.	 Paul  Eggert  removed
       patch's	arbitrary limits; added support for binary files, setting file
       times, and deleting files; and made it conform better to POSIX.	 Other
       contributors  include  Wayne  Davison,  who  added unidiff support, and
       David MacKenzie, who added configuration and backup  support.   Andreas
       Grünbacher added support for merging.

GNU								      PATCH(1)
[top]

List of man pages available for Kali

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net