open man page on OpenBSD

Man page or keyword search:  
man Server   11362 pages
apropos Keyword Search (all sections)
Output format
OpenBSD logo
[printable version]

OPEN(2)			  OpenBSD Programmer's Manual		       OPEN(2)

NAME
     open - open or create a file for reading or writing

SYNOPSIS
     #include <fcntl.h>

     int
     open(const char *path, int flags, mode_t mode);

DESCRIPTION
     The file name specified by path is opened for reading and/or writing as
     specified by the argument flags and the file descriptor returned to the
     calling process.  The flags argument may indicate the file is to be
     created if it does not exist (by specifying the O_CREAT flag), in which
     case the file is created with mode mode as described in chmod(2) and
     modified by the process' umask value (see umask(2)).

     The flags specified are formed by OR'ing the following values:

	   O_RDONLY    Open for reading only.
	   O_WRONLY    Open for writing only.
	   O_RDWR      Open for reading and writing.
	   O_NONBLOCK  Do not block on open or for data to become available.
	   O_APPEND    Append on each write.
	   O_CREAT     Create file if it does not exist.
	   O_TRUNC     Truncate size to 0.
	   O_EXCL      Error if create and file exists.
	   O_SYNC      Perform synchronous I/O operations.
	   O_SHLOCK    Atomically obtain a shared lock.
	   O_EXLOCK    Atomically obtain an exclusive lock.
	   O_NOFOLLOW  If last path element is a symlink, don't follow it.

     Opening a file with O_APPEND set causes each write on the file to be
     appended to the end.  If O_TRUNC and a writing mode are specified and the
     file exists, the file is truncated to zero length.	 If O_EXCL is set with
     O_CREAT and the file already exists, open() returns an error.  This may
     be used to implement a simple exclusive access locking mechanism.	If
     either of O_EXCL or O_NOFOLLOW are set and the last component of the
     pathname is a symbolic link, open() will fail even if the symbolic link
     points to a non-existent name.  If the O_NONBLOCK flag is specified, do
     not wait for the device or file to be ready or available.	If the open()
     call would result in the process being blocked for some reason (e.g.,
     waiting for carrier on a dialup line), open() returns immediately.	 This
     flag also has the effect of making all subsequent I/O on the open file
     non-blocking.  If the O_SYNC flag is set, all I/O operations on the file
     will be done synchronously.

     A FIFO should either be opened with O_RDONLY or with O_WRONLY.  The
     behavior for opening a FIFO with O_RDWR is undefined.

     When opening a file, a lock with flock(2) semantics can be obtained by
     setting O_SHLOCK for a shared lock, or O_EXLOCK for an exclusive lock.
     If creating a file with O_CREAT, the request for the lock will never fail
     (provided that the underlying filesystem supports locking).

     If open() is successful, the file pointer used to mark the current
     position within the file is set to the beginning of the file.

     When a new file is created it is given the group of the directory which
     contains it.

     The new descriptor is set to remain open across execve(2) system calls;
     see close(2) and fcntl(2).

     The system imposes a limit on the number of file descriptors open
     simultaneously by one process.  getdtablesize(3) returns the current
     system limit.

RETURN VALUES
     If successful, open() returns a non-negative integer, termed a file
     descriptor.  Otherwise, a value of -1 is returned and errno is set to
     indicate the error.

ERRORS
     The named file is opened unless:

     [ENOTDIR]	   A component of the path prefix is not a directory.

     [ENAMETOOLONG]
		   A component of a pathname exceeded {NAME_MAX} characters,
		   or an entire path name exceeded {PATH_MAX} characters.

     [ENOENT]	   O_CREAT is not set and the named file does not exist.

     [ENOENT]	   A component of the path name that must exist does not
		   exist.

     [EACCES]	   Search permission is denied for a component of the path
		   prefix.

     [EACCES]	   The required permissions (for reading and/or writing) are
		   denied for the given flags.

     [EACCES]	   O_CREAT is specified, the file does not exist, and the
		   directory in which it is to be created does not permit
		   writing.

     [ELOOP]	   Too many symbolic links were encountered in translating the
		   pathname, or the O_NOFOLLOW flag was specified and the
		   target is a symbolic link.

     [EISDIR]	   The named file is a directory, and the arguments specify it
		   is to be opened for writing.

     [EINVAL]	   The flags specified for opening the file are not valid.

     [EROFS]	   The named file resides on a read-only file system, and the
		   file is to be modified.

     [EMFILE]	   The process has already reached its limit for open file
		   descriptors.

     [ENFILE]	   The system file table is full.

     [ENXIO]	   The named file is a character special or block special
		   file, and the device associated with this special file does
		   not exist.

     [ENXIO]	   The named file is a FIFO, the O_NONBLOCK and O_WRONLY flags
		   are set, and no process has the file open for reading.

     [EINTR]	   The open() operation was interrupted by a signal.

     [EOPNOTSUPP]  O_SHLOCK or O_EXLOCK is specified but the underlying
		   filesystem does not support locking.

     [EWOULDBLOCK]
		   O_NONBLOCK and one of O_SHLOCK or O_EXLOCK is specified and
		   the file is already locked.

     [ENOSPC]	   O_CREAT is specified, the file does not exist, and the
		   directory in which the entry for the new file is being
		   placed cannot be extended because there is no space left on
		   the file system containing the directory.

     [ENOSPC]	   O_CREAT is specified, the file does not exist, and there
		   are no free inodes on the file system on which the file is
		   being created.

     [EDQUOT]	   O_CREAT is specified, the file does not exist, and the
		   directory in which the entry for the new file is being
		   placed cannot be extended because the user's quota of disk
		   blocks on the file system containing the directory has been
		   exhausted.

     [EDQUOT]	   O_CREAT is specified, the file does not exist, and the
		   user's quota of inodes on the file system on which the file
		   is being created has been exhausted.

     [EIO]	   An I/O error occurred while making the directory entry or
		   allocating the inode for O_CREAT.

     [ETXTBSY]	   The file is a pure procedure (shared text) file that is
		   being executed and the open() call requests write access.

     [EFAULT]	   path points outside the process's allocated address space.

     [EEXIST]	   O_CREAT and O_EXCL were specified and the file exists.

     [EPERM]	   The file named by path is flagged append-only but O_APPEND
		   was not specified in flags.

     [EOPNOTSUPP]  An attempt was made to open a socket (not currently
		   implemented).

     [EBUSY]	   An attempt was made to open a terminal device that requires
		   exclusive access and the specified device has already be
		   opened.

SEE ALSO
     chflags(2), chmod(2), close(2), dup(2), flock(2), lseek(2), read(2),
     umask(2), write(2), getdtablesize(3)

STANDARDS
     The open() function conforms to IEEE Std 1003.1-2008 (``POSIX'').

     POSIX specifies three different flavors for synchronous I/O: O_SYNC,
     O_DSYNC, and O_RSYNC.  In OpenBSD, these are all equivalent.

     The O_SHLOCK and O_EXLOCK flags are non-standard extensions and should
     not be used if portability is of concern.

HISTORY
     An open() function call appeared in Version 2 AT&T UNIX.

CAVEATS
     The O_TRUNC flag requires that one of O_RDWR or O_WRONLY also be
     specified, else EINVAL is returned.

OpenBSD 4.9		       February 18, 2011		   OpenBSD 4.9
[top]

List of man pages available for OpenBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net