ntfsclone man page on Kali

Man page or keyword search:  
man Server   9211 pages
apropos Keyword Search (all sections)
Output format
Kali logo
[printable version]

NTFSCLONE(8)							  NTFSCLONE(8)

NAME
       ntfsclone - Efficiently clone, image, restore or rescue an NTFS

SYNOPSIS
       ntfsclone [OPTIONS] SOURCE
       ntfsclone --save-image [OPTIONS] SOURCE
       ntfsclone --restore-image [OPTIONS] SOURCE
       ntfsclone --metadata [OPTIONS] SOURCE

DESCRIPTION
       ntfsclone  will efficiently clone (copy, save, backup, restore) or res‐
       cue an NTFS filesystem to a sparse file, image, device  (partition)  or
       standard	 output.   It  works  at disk sector level and copies only the
       used data. Unused disk space becomes zero  (cloning  to	sparse	file),
       encoded	with  control  codes  (saving  in  special image format), left
       unchanged (cloning to a disk/partition) or filled with  zeros  (cloning
       to standard output).

       ntfsclone  can  be useful to make backups, an exact snapshot of an NTFS
       filesystem and restore it later on, or  for  developers	to  test  NTFS
       read/write  functionality, troubleshoot/investigate users' issues using
       the clone without the risk of destroying the original filesystem.

       The clone, if not using the special image format, is an exact  copy  of
       the  original NTFS filesystem from sector to sector thus it can be also
       mounted just like the original NTFS filesystem.	 For  example  if  you
       clone  to  a  file  and the kernel has loopback device and NTFS support
       then the file can be mounted as

	      mount -t ntfs -o loop ntfsclone.img /mnt/ntfsclone

   Windows Cloning
       If you want to copy, move or restore a  system  or  boot	 partition  to
       another computer, or to a different disk or partition (e.g. hda1->hda2,
       hda1->hdb1 or to a different disk sector offset) then you will need  to
       take extra care.

       Usually,	 Windows  will	not  be able to boot, unless you copy, move or
       restore NTFS to the same partition which starts at the same  sector  on
       the  same  type of disk having the same BIOS legacy cylinder setting as
       the original partition and disk had.

       The ntfsclone utility guarantees to make an exact copy of NTFS  but  it
       won't  deal  with  booting  issues.  This  is by design: ntfsclone is a
       filesystem, not system utility. Its aim is only NTFS cloning, not  Win‐
       dows  cloning. Hereby ntfsclone can be used as a very fast and reliable
       build block for Windows cloning but itself it's not enough.

   Sparse Files
       A file is sparse if it has unallocated  blocks  (holes).	 The  reported
       size  of	 such  files are always higher than the disk space consumed by
       them.  The du command can tell the real disk space  used	 by  a	sparse
       file.   The  holes are always read as zeros. All major Linux filesystem
       like, ext2, ext3, reiserfs, Reiser4, JFS and XFS, supports sparse files
       but for example the ISO 9600 CD-ROM filesystem doesn't.

   Handling Large Sparse Files
       As  of  today  Linux provides inadequate support for managing (tar, cp,
       gzip, gunzip, bzip2, bunzip2, cat, etc) large sparse files.   The  only
       main Linux filesystem having support for efficient sparse file handling
       is XFS by the XFS_IOC_GETBMAPX ioctl(2).	 However none  of  the	common
       utilities supports it.  This means when you tar, cp, gzip, bzip2, etc a
       large sparse file they will always read the entire file,	 even  if  you
       use the "sparse support" options.

       bzip2(1)	 compresses large sparse files much better than gzip(1) but it
       does so also much slower. Moreover neither of them handles large sparse
       files  efficiently  during uncompression from disk space usage point of
       view.

       At present the most efficient way, both speed and space-wise,  to  com‐
       press  and uncompress large sparse files by common tools would be using
       tar(1) with the options -S (handle sparse files "efficiently")  and  -j
       (filter the archive through bzip2). Although tar still reads and analy‐
       ses the entire file, it doesn't pass on the large  data	blocks	having
       only  zeros to filters and it also avoids writing large amount of zeros
       to the disk needlessly. But since tar can't create an archive from  the
       standard	 input,	 you  can't do this in-place by just reading ntfsclone
       standard output. Even more sadly, using the -S option  results  serious
       data  loss  since  the  end  of 2004 and the GNU tar maintainers didn't
       release fixed versions until the present day.

   The Special Image Format
       It's also possible, actually it's recommended, to save an NTFS filesys‐
       tem  to	a  special  image format.  Instead of representing unallocated
       blocks as holes, they are encoded using control codes. Thus, the	 image
       saves  space without requiring sparse file support. The image format is
       ideal for streaming filesystem images over the network and similar, and
       can be used as a replacement for Ghost or Partition Image if it is com‐
       bined with other tools. The downside is that you can't mount the	 image
       directly, you need to restore it first.

       To  save	 an  image  using  the special image format, use the -s or the
       --save-image  option.  To  restore  an  image,  use  the	 -r   or   the
       --restore-image	option. Note that you can restore images from standard
       input by using '-' as the SOURCE file.

   Metadata-only Cloning
       One of the features of ntfsclone is that, it can	 also  save  only  the
       NTFS  metadata  using  the  option -m or --metadata and the clone still
       will be mountable. In this case all non-metadata file content  will  be
       lost and reading them back will result always zeros.

       The  metadata-only  image  can  be compressed very well, usually to not
       more than 1-8 MB thus it's easy to transfer  for	 investigation,	 trou‐
       bleshooting.

       In  this mode of ntfsclone, NONE of the user's data is saved, including
       the resident user's data embedded into metadata.	 All  is  filled  with
       zeros.	Moreover  all  the  file timestamps, deleted and unused spaces
       inside the metadata are filled with zeros. Thus this mode  is  inappro‐
       priate  for  example  for forensic analyses.  This mode may be combined
       with --save-image to create a special image format file	instead	 of  a
       sparse file.

       Please  note, filenames are not wiped out. They might contain sensitive
       information, so think twice before sending such an image to anybody.

OPTIONS
       Below is a summary of all the options that ntfsclone  accepts.	Nearly
       all options have two equivalent names.  The short name is preceded by -
       and the long name is preceded by -- .  Any single letter options,  that
       don't  take  an	argument,  can be combined into a single command, e.g.
       -fv is equivalent to -f -v .  Long named options can be abbreviated  to
       any unique prefix of their name.

       -o, --output FILE
	      Clone  NTFS to the non-existent FILE.  If FILE is '-' then clone
	      to the standard output. This option cannot be used for  creating
	      a partition, use --overwrite for an existing partition.

       -O, --overwrite FILE
	      Clone NTFS to FILE, which can be an existing partition or a reg‐
	      ular file which will be overwritten if it exists.

       -s, --save-image
	      Save to the special image format. This is the most efficient way
	      space  and speed-wise if imaging is done to the standard output,
	      e.g. for image compression, encryption or	 streaming  through  a
	      network.

       -r, --restore-image
	      Restore  from the special image format specified by SOURCE argu‐
	      ment. If the SOURCE is '-' then the image is read from the stan‐
	      dard input.

       -n, --no-action
	      Test  the consistency of a saved image by simulating its restor‐
	      ing without writing anything. The NTFS  data  contained  in  the
	      image  is	 not  tested.  The option --restore-image must also be
	      present, and the options --output and --overwrite must be	 omit‐
	      ted.

       --rescue
	      Ignore  disk read errors so disks having bad sectors, e.g. dying
	      disks, can be rescued the most  efficiently  way,	 with  minimal
	      stress  on  them. Ntfsclone works at the lowest, sector level in
	      this mode too thus more data can be rescued.   The  contents  of
	      the  unreadable  sectors	are  filled  by	 character '?' and the
	      beginning of such sectors are marked by "BadSectoR\0".

       -m, --metadata
	      Clone ONLY METADATA  (for	 NTFS  experts).  Only	cloning	 to  a
	      (sparse) file is allowed, unless used the option --save-image is
	      also used.  You can't metadata-only clone to a device.

       --ignore-fs-check
	      Ignore the result of  the	 filesystem  consistency  check.  This
	      option  is  allowed  to be used only with the --metadata option,
	      for the safety of user's data.  The  clusters  which  cause  the
	      inconsistency are saved too.

       -t, --preserve-timestamps
	      Do  not wipe the timestamps, to be used only with the --metadata
	      option.

       --full-logfile
	      Include the Windows log file in the copy. This  is  only	useful
	      for  extracting  metadata, saving or cloning a file system which
	      was not properly unmounted from Windows.

       --new-serial, or

       --new-half-serial
	      Set a new random serial number to the clone. The	serial	number
	      is a 64 bit number used to identify the device during the mount‐
	      ing process, so it has to be changed to enable the original file
	      system  and the clone to be mounted at the same time on the same
	      computer.

	      The option --new-half-serial only changes the upper part of  the
	      serial  number,  keeping the lower part which is used by Windows
	      unchanged.

	      The options --new-serial and --new-half-serial can only be  used
	      when cloning a file system of restoring from an image.

	      The  serial  number  is  not  the volume UUID used by Windows to
	      locate files which have been moved to another volume.

       -f, --force
	      Forces ntfsclone to proceed if the filesystem is marked  "dirty"
	      for consistency check.

       -q, --quiet
	      Do not display any progress-bars during operation.

       -h, --help
	      Show a list of options with a brief description of each one.

EXIT CODES
       The exit code is 0 on success, non-zero otherwise.

EXAMPLES
       Clone NTFS on /dev/hda1 to /dev/hdc1:

	      ntfsclone --overwrite /dev/hdc1 /dev/hda1

       Save an NTFS to a file in the special image format:

	      ntfsclone --save-image --output backup.img /dev/hda1

       Restore an NTFS from a special image file to its original partition:

	      ntfsclone --restore-image --overwrite /dev/hda1 backup.img

       Save an NTFS into a compressed image file:

	      ntfsclone --save-image -o - /dev/hda1 | gzip -c > backup.img.gz

       Restore an NTFS volume from a compressed image file:

	      gunzip -c backup.img.gz | \
	      ntfsclone --restore-image --overwrite /dev/hda1 -

       Backup  an  NTFS	 volume to a remote host, using ssh. Please note, that
       ssh may ask for a password!

	      ntfsclone --save-image --output - /dev/hda1 | \
	      gzip -c | ssh host 'cat > backup.img.gz'

       Restore an NTFS volume from a remote host via ssh.  Please  note,  that
       ssh may ask for a password!

	      ssh host 'cat backup.img.gz' | gunzip -c | \
	      ntfsclone --restore-image --overwrite /dev/hda1 -

       Stream an image file from a web server and restore it to a partition:

	      wget -qO - http://server/backup.img | \
	      ntfsclone --restore-image --overwrite /dev/hda1 -

       Clone an NTFS volume to a non-existent file:

	      ntfsclone --output ntfs-clone.img /dev/hda1

       Pack  NTFS  metadata for NTFS experts. Please note that bzip2 runs very
       long but results usually at least 10 times smaller archives  than  gzip
       on a sparse file.

	      ntfsclone --metadata --output ntfsmeta.img /dev/hda1
	      bzip2 ntfsmeta.img

	      Or, outputting to a compressed image :
	      ntfsclone -mst --output - /dev/hda1 | bzip2 > ntfsmeta.bz2

       Unpacking NTFS metadata into a sparse file:

	      bunzip2 -c ntfsmeta.img.bz2 | \
	      cp --sparse=always /proc/self/fd/0 ntfsmeta.img

KNOWN ISSUES
       There  are  no  known  problems	with ntfsclone.	 If you think you have
       found a problem then please send an email describing it to the develop‐
       ment team: ntfs-3g-devel@lists.sf.net

       Sometimes  it  might appear ntfsclone froze if the clone is on ReiserFS
       and even CTRL-C won't stop it. This is not a bug in ntfsclone,  however
       it's  due to ReiserFS being extremely inefficient creating large sparse
       files and not handling signals during  this  operation.	This  ReiserFS
       problem	was  improved  in kernel 2.4.22.  XFS, JFS and ext3 don't have
       this problem.

AUTHORS
       ntfsclone was written by Szabolcs Szakacsits  with  contributions  from
       Per Olofsson (special image format support) and Anton Altaparmakov.  It
       was ported to ntfs-3g by Erik Larsson and Jean-Pierre Andre.

AVAILABILITY
       ntfsclone is part of the ntfs-3g package and is available at:
       http://www.tuxera.com/community/

SEE ALSO
       ntfsresize(8) ntfsprogs(8) xfs_copy(8) debugreiserfs(8) e2image(8)

ntfs-3g 2017.3.23		 February 2013			  NTFSCLONE(8)
[top]

List of man pages available for Kali

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net