nfs4_max_transfer_size(5)nfs4_max_transfer_size(5)NAMEnfs4_max_transfer_size - control the size of the data portion of a NFS
version 4 read, write, readdir, or readdirplus request
VALUES
Failsafe
Default
Allowed values
Recommended values
A warning will be issued at runtime if the tunable is set to a value
greater than 1048576 since this is outside the tested limits. This is
not a serious warning but just an information message for the adminis‐
trator.
DESCRIPTION
controls the maximum size of the data portion of a NFS version 4 read,
write, readdir, or readdirplus request. This parameter controls both
the maximum size of a request that the server returns as well as the
maximum size of a request that the client generates.
Who Is Expected to Change This Tunable?
Distributed file system administrators should examine this value if
they want to decrease or increase the default size of a NFS packet.
Restrictions on Changing
The tunable is dynamic; however, the transfer size for a file system is
set when the file system is mounted. To affect a particular file sys‐
tem, unmount and mount the file system after changing this parameter.
The actual NFS version 4 transfer size is controlled by these tunable
parameters: and The actual transfer size will depend on the tunable
with the smallest value. For NFS version 4 traffic increase and to the
same value to increase the transfer size. To decrease the transfer
size, just changing is sufficient.
When Should the Value of This Tunable Be Raised?
An increase in the transfer size will result in fewer requests to the
NFS server at the expense of system resources on both the NFS client
and NFS server.
What Are the Side Effects of Raising the Value?
An increase in system resources on both the NFS client and NFS server.
When Should the Value of This Tunable Be Lowered?
In the event of NFS communication failures, the value should be changed
back to the default value.
What Are the Side Effects of Lowering the Value?
An increase in NFS version 4 network traffic caused by an increase in
the number of I/O requests.
WARNINGS
All HP-UX kernel tunable parameters are release specific. This parame‐
ter may be removed or have its meaning changed in future releases of
HP-UX.
Installation of optional kernel software, from HP or other vendors, may
cause changes to tunable parameter values. After installation, some
tunable parameters may no longer be at the default or recommended val‐
ues. For information about the effects of installation on tunable val‐
ues, consult the documentation for the kernel software being installed.
For information about optional kernel software that was factory
installed on your system, see at
AUTHOR
was developed by Sun Microsystems, Inc.
SEE ALSOkctune(1M), sam(1M), gettune(2), settune(2), nfs4_bsize(5),
nfs4_max_transfer_size_cots(5), values(5).
Tunable Kernel Parameters nfs4_max_transfer_size(5)
